Log for abap program

hi frnds To be specific I would like to ask if there are logs (time, day, user) for the changes (or the activation) in a specific program or a function module or executing a abap program

Hi,
You can see the last change in a program in program attribute.
Last changed by : 01.01.2014 XXXXXXX
( Date) (User name)
Last change in a function also can see using function attribures.
General Data
Last changed by : xxx
Changed on : 01.01.2014
Also u can use version management to view the changes done by which user, date and time..
Regards,
Pavithra

Similar Messages

Log of ABAP programs

Hii Gurus!!
Can anyone give me the report for ABAP programs, which has been fired in last one month. This is an urgent requirement of my client.
points will be rewarded.
kapil

There is one table which can help you.
Please check the TADIR table and then check the table entries there :-
enter the PGMID = r3tr and OBJECT type=PROG
You will get all the program list over there. Hope it will work for you

Log from ABAP program in Process chain

Hello.
I have some problem. I wrote the ABAP program and insert this program in process chain. This program a correctly work, but I canu2019t view the steps of work this program. In help:
You can write logs by outputting success messages. (Error messages terminate the task!)
Example: MESSAGE s051(rsar) WITH 'Process successfully ended'.
You can see these logs on the tab page Batch in the detail monitors of the process chain.
I append this code to my program, but nothing in process chain.
Help me, please - what code I need to insert in my program so that view this message in a process chain logs?

We have an ABAP that outputs a message. The output from the following code is visible when you click on a process chain step icon, and select the middle tab that says "Backg" for background.
IF sy-subrc = 0.
    CONCATENATE text-005 p_date INTO l_msg SEPARATED BY space.
    MESSAGE i162(00) WITH l_msg.
ELSE.
    CONCATENATE text-003 p_date INTO l_msg SEPARATED BY space.
    MESSAGE e162(00) WITH l_msg.
ENDIF.

Import issue for ABAP program in Production Server ?

Hi Experts,
I have an ABAP program which gets executed properly in BW Development server but getting the following error when I am trying to execute it in the BW Production while I could activate the program successfully.
Kindly help me to resolve this issue.
Thanks in advance !!!
Regards,
Gokulkumar RD

Hi Golkul,
Can you debug the program while execute?
I think there is some hardcoding in the program for checkiing the client and then raised a custom message in the program.
Can you share the coding of the prorgam if possible?
Try to check for any messages raised in the program. Also click on the on the message pop up and see the details on the message and let us know.
Thanks
Amit

How to See logs for custom programs from without the logviewer in NWA

Hello Experts,
The JavaAS developers want to see the logs for their custom programs from without the logviewer in NWA.
Do you have any experience or know of any reference materials to instruct them on where to write their logs, and how to configure NWA to see them?
Thanks
Jibin.

Hello Jibin,
Your developers should familiarize themselves with the Logging Framework of the J2EE Engine.
Here is the guide:
http://help.sap.com/saphelp_nw04/helpdata/EN/a2/15ab41d60bcb46e10000000a155106/frameset.htm
If they use the Logging Framework you would be able to access the logs through NWA.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA)

How do i create a header template for ABAP programs?

Hi all.
Need a little bit of help here. When you create a new program you get a template with space for comments at the top of the program and basic stuff. If I want to change this template to add areas that we want to have comments on for every program we make at work. How do I do that?
Instead of :
I want to have in a way similar to this:
*     Author:                         *
*     Function:                    *
And so on
I want the words to be there when our developers creates the program.
How can I do that?
BR
Kalle

After I create a new report program, I delete everything but the REPORT line. I then put this code in for my skeleton.
* Created By:            Walter Industries (Paul Chapman)
* Created On:            02/29/2008
* Tran Code:             ZLMxx
* Program Name:          YPTC_REPORT_SKELETON        " replace New Progam Name herer
* Program Descr:         Configurable Leads Data Query
*                         Modification Log
* Programmer   :Issue:   Date   : Chg Req. : Description
* Paul Chapman :00000:02/29/2008:DEVK000000:New Program
REPORT yptc_report_skeleton MESSAGE-ID zleads_msg.      " replace New Progam Name herer
*_________________________________________________ Tables
TABLES: zpca, cepc, zlmlead.
*_________________________________________________ Constants
CONSTANTS:
line_length      TYPE i VALUE 100,
c_tab            TYPE x VALUE 9,                          " x'09'
c_crlf           TYPE x VALUE 3338. " x'ODOA'
*_________________________________________________ Types
TYPES: BEGIN OF scr_text_line,
         line(line_length) TYPE c,
       END OF scr_text_line.
*_________________________________________________ DATA
DATA:
curr_screen_tab(4) TYPE n.
*_________________________________________________ ALV Area
*_________________________________________________ Ranges
RANGES:
r_branch       FOR zpca-branch.
*_________________________________________________ Selection Screen
SELECTION-SCREEN:
BEGIN OF TABBED BLOCK tabs FOR 36 LINES,
    TAB (20) tab1   USER-COMMAND push1 DEFAULT SCREEN 1010,
    TAB (20) tab2   USER-COMMAND push2 DEFAULT SCREEN 1020,
END OF BLOCK tabs.
* Tab1 Options            S E L E C T I O N    S C R E E N S    Tab 01 *
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:
   sdiv      FOR cepc-prctr MATCHCODE OBJECT zdivjwh,
   ssbrch    FOR zlmlead-branch.
SELECTION-SCREEN: END OF BLOCK blk1.
SELECTION-SCREEN: BEGIN OF BLOCK bl10 WITH FRAME TITLE text-010.
PARAMETERS:
cparm1   AS CHECKBOX USER-COMMAND sel,
cparm2   AS CHECKBOX USER-COMMAND sel,
cparm3   AS CHECKBOX USER-COMMAND sel,
cparm4   AS CHECKBOX USER-COMMAND sel,
cparm5   AS CHECKBOX USER-COMMAND sel.
SELECTION-SCREEN: END OF BLOCK bl10.
SELECTION-SCREEN END OF SCREEN 1010.
* Tab 2 Options            S E L E C T I O N    S C R E E N S   Tab 02 *
SELECTION-SCREEN BEGIN OF SCREEN 1020 AS SUBSCREEN.
SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECT-OPTIONS:
   sctype      FOR zlmlead-ctype,
   sprfcnt     FOR zlmlead-prefcont.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25)   text-201.
SELECTION-SCREEN POSITION 30.
PARAMETERS: rb_opt1 RADIOBUTTON GROUP gr20.
SELECTION-SCREEN COMMENT 34(03) text-991. " Yes
SELECTION-SCREEN POSITION 40.
PARAMETERS: rb_opt2 RADIOBUTTON GROUP gr20.
SELECTION-SCREEN COMMENT 44(03) text-992. " No
SELECTION-SCREEN POSITION 50.
PARAMETERS: rb_opt3 RADIOBUTTON GROUP gr20.
SELECTION-SCREEN COMMENT 54(06) text-993. " Either
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK blk2.
SELECTION-SCREEN: BEGIN OF BLOCK bl20 WITH FRAME TITLE text-020.
PARAMETERS:
cb_opt1   AS CHECKBOX,
cb_opt2   AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN: END OF BLOCK bl20.
SELECTION-SCREEN END OF SCREEN 1020.
*____________________________________________ Screen Actions
AT SELECTION-SCREEN OUTPUT.
PERFORM what_tab_am_i_on.
CASE curr_screen_tab.
    WHEN '1010'.                                            " Tab 1
    WHEN '1020'.                                            " Tab 2
    WHEN OTHERS.
ENDCASE.
PERFORM tab_hide_unhide.
*___________________________________________ Initialization
INITIALIZATION.
* Tab Text
tab1 = 'Tab 1'.
tab2 = 'Tab 2'.
*_________________________________________________ Load of Program
LOAD-OF-PROGRAM.
*_________________________________________________ Start of Selection
START-OF-SELECTION.
PERFORM set_up_branch_range.
*_________________________________________________ End of Selection
END-OF-SELECTION.
*&      Form what_tab_am_i_on
FORM what_tab_am_i_on.
LOOP AT SCREEN.
    IF     screen-name CS 'BLOCK_1010'.
      curr_screen_tab = '1010'.
    ELSEIF screen-name CS 'BLOCK_1020'.
      curr_screen_tab = '1020'.
    ENDIF.
ENDLOOP.
ENDFORM.                    " what_tab_am_i_on
*&      Form tab_hide_unhide
FORM tab_hide_unhide.
LOOP AT SCREEN.
    CHECK screen-group3 = 'TAB'.
    CASE screen-name.
      WHEN 'TAB1'.
*        IF
*          screen-active = 1.
*          screen-required = 1.
*          screen-input = 1.
*          screen-output = 1.
*          screen-intensified = 1.
*          screen-invisible = 1.
*        ELSE.
*          screen-active = 0.
*          screen-required = 0.
*          screen-input = 0.
*          screen-output = 0.
*          screen-intensified = 0.
*          screen-invisible = 0.
*        ENDIF.
      WHEN 'TAB2'.
*        IF
*          screen-active = 1.
*        ELSE.
*          screen-active = 0.
*        ENDIF.
    ENDCASE.
    MODIFY SCREEN.
ENDLOOP.
ENDFORM.                    " tab_hide_unhide
*&      Form set_up_branch_range
FORM set_up_branch_range.
r_branch[] = ssbrch[].
CHECK NOT sdiv IS INITIAL.
r_branch     = 'IEQ'.
SELECT branch INTO r_branch-low
    FROM zpca
    WHERE region = 'JWHCO'
      AND division IN sdiv.
    APPEND r_branch.
ENDSELECT.
SORT r_branch.
DELETE ADJACENT DUPLICATES FROM r_branch.
ENDFORM.                    " set_up_branch_range

See logs for custom programs from without the logviewer in NWA

Hello Experts,
The JavaAS developers want to see the logs for their custom programs from without the logviewer in NWA.
Do you have any experience or know of any reference materials to instruct them on where to write their logs, and how to configure NWA to see them?
Thanks
Jibin.

Hello,
Via NWA I am not sure it is possible without logviewer, but via Portal you can if you are able to create an application with help of NWDS which will read log from OS level (need to provide path for default trace in your application) show on frontend.
Then deploy this on portal.
Regards,
Abhay

Logs for checking program execution.

Hi All,
We have a ABAP program in our process chain, that FTP's the contents of an InfoSpoke to an externel server.
It is possible to run this FTP probram directly in SE38 and so I would like to know if there is a way by which we can see the logs of when the problem was executed?
Is there a table that stores when a program was executed?
Thanks
Arvind

If it is run as a background job, any messages created by the ABAP will be visible in SM37.

PHYSICAL FILES FOR ABAP PROGRAM

hi friends
i would like to know are there any physical files on os level for the ABAP programs.for example, when we create a customized report for sales in ABAP does SAP also create a corresponding copy on os level. if yes then in which file system .?
we have ECC 5.0 on AIX & use oracle 9i.
thanks in advance.
regards.

imran mohd wrote:
> hi friends
>
> i would like to know are there any physical files on os level for the ABAP programs.for example, when we create a customized report for sales in ABAP does SAP also create a corresponding copy on os level. if yes then in which file system .?
>
>
> we have ECC 5.0 on AIX & use oracle 9i.
>
> thanks in advance.
>
> regards.
The code you write in ABAP is not stored on OS-level (at least not in an ABAP-stack system) - it's contained in the database. As for the 'copies' your management wishes (for some ambigous reason) to have - there's no need. The code you write is versionised, so that every change made to the code is automatically documented when you press 'Save'.
That was answering a 'basic' question - but you have made me very curious now: would you mind to explain why you would want a 'copy' of your custom code on OS-level? Any special reason??
Edited by: Mylène Dorias on Jun 9, 2010 1:37 PM typo

How to get Access key for ABAP Program development in HANA Studio

Hi,
I have got instance for ABAP on HANA development system.
But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
Can any one suggest the way to create ACCESS KEY??
Thanks,
Ram

Dear Ram,
it seems that you need to follow the chapter 6.1 in the documentation...:
Kind regards, Stephan

TCode for abap program performance testing

Hi
I have tuned a abap program which was consuming lot of time. I still have the old version with diff name. I would like to know the tcodes where in i could see the performance of the program.
regards
Balaji

Hi balaji,
This is kiran Kumar.G.I will give some steps.you better to follow those steps to get ur report performance.
If u r satisfy with my answer give me REWARD POINTS.
            HAVE A NICE DAY.
STEPS:
1.OPEN UR REPORT IN SE38 TRANSACTION.
2.SELECT THE MENU PATH
UTILITIES-->MORE UTILITIES-->RUNTIME ANALYSIS
3.SELECT THE PROGRAM RADIO BUTTON AND GIVE UR REPORT NAME THERE.AND CLICK <b>EXECUTE</b> BUTTON
4.IT WILL TAKE U TO ANOTHER SCREEN THERE U CAN EXECUTE UR REPORT AND COME BACK.
5.CLICK ON ANALYZE BUTTON.(PRESENT IN BELOW OF THE SCREEN).
THEN U WILL GET ONE GRAPH
NOTE:
1.IF IT IS RED UR PROGRAM IS HAVING VERY POOR PERFORMANCE
2.IF IT IS GREEN IT IS OK.
ABAP GRAPH : TELLS UR CODING IN THE REPORT.
DATABASE GRAPH : U R RETREIVE DATA FROM DATABASE IN UR REPORT..
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1.     Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2.     Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3.     Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4.     Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5.     Avoid using nested SELECT statement, SELECT within LOOPs.
6.     Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7.     Avoid using SELECT * and Select only the required fields from the table.
8.     Avoid nested loops when working with large internal tables.
9.     Use assign instead of into in LOOPs for table types with large work areas
10.     When in doubt call transaction SE30 and use the examples and check your code
11.     Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12.     Use "CHECK" instead of IF/ENDIF whenever possible.
13.     Use "CASE" instead of IF/ENDIF whenever possible.
14.     Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING", creates more coding but is more effcient.
Regards,
Kiran Kumar.G

Transport for ABAP Program

Hello,
Can anyone tell me how I can create a transport for and ABAP Program. It is currently in DEV but needs to go to test.
Thanks

I think you must have created this object as a Local Object. You need to do 2 things here :
Reassign the Development Class to a Z Dev Class.
Use trx code SE38. On the first screen, specify the program name & click on Goto-->Object Directory Entry.
You will get a popup here, change the Dev Class to whatever you have on your side, this will prompt you for a Workbench Transport request. Follow up with Basis to get it to Test.

Can I use logical databases in a WebDynpro for ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the exisinting logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hi
Please let me also know the solution to this. I am a beginner to WebDynpro and want to know if I can make use of LDB's as we do in our normal HR programming do develop a WDA in HR.
Thanks and regards,
Uma.

Client export for ABAP programs, repository objects cross client objects

Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank you

You can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael

Authentication or Security Checks for ABAP programs

Dear experts,
     Please tell me where do we give the authentication or security checks to our ABAP programs and how do we do that. ( Do not allow all to execute our developed programs).
Regards,
Maanasa

If you know the authorization group u can use the following ways.
1. In the Attributes u can specify the authorization gourp name
2. AT SELECTION-SCREEN
AUTHORITY-CHECK OBJECT 'Z_TABU_DIS'
            ID 'ACTVT' FIELD '03'
           ID 'CUSTTYPE' FIELD v_class
            ID 'TABLENAME' FIELD p_dbtble.
CASE SY-SUBRC.
   WHEN 0.
    WHEN OTHERS.
Error message
     message I419(MO).
     STOP.
ENDCASE.

Log for abap program

Similar Messages

Maybe you are looking for