Log for eMail Bursting needed

hello friends,
in eMail Bursting started via web Template pre-filtered Customers receive an eMail.
We want to show what customers already received an eMail.
Where is this information stored?
Search in Broadcaster Log in RSRD_ADMIN was not successful.
thank you for your help,
angie

Hi,
Check SCOT and SOST Tcodes
Thanks
Reddy

Similar Messages

  • Broadcast email - Bursting: Could not determine recipient

    Hi,
    I created a broadcast setting for email-bursting and checked it/saved it/scehduled it successfully.
    The broadcast setting is trying to burst a runtime statistcis query by user (infoobject 0TCTUSERNM for users is contained in the query). The characteristic for receipient determination is "0TCTUSERNM" and the attribute is "person responsible" with attribute value being set to "user name"
    However upon executing this setting I get the following error :
      Bursting: Could not determine recipient  with a yellow light against this error message and the bursting email is never sent-out.
    can someone please advise the remedy for this problem
    regards
    Kulmohan

    Hi Simon,
    No, I donot have any person allocated to the blank entry for the characteristic being used for bursting
    Can you please advise What I would need to do for this?
    regards,
    Kulmohan

  • Broadcasting - EMail Bursting

    Hi,
    Can any one please answer below questions on email bursting.
    Lets say our Vendor master data consists of 50000 vendors,If i opted to broadcast a report based on email bursting,Does it shoots email to all the 50,000 vendors or only vendors for which transaction data exists during report execution period.
    We have few issue when we scheduled broadcasts manually,When we triggered multiple broadcasts at same time our pre calculation server is out of resources and broadcasts are failing.If i opt for email bursting will the system shoots email all the vendors at the same time.
    When we broadcast email to vendor our requirement to broadcast output to 2 email (one vendor email and the other is internal email which will be constant at all times for records)...my understanding is with email bursting we can send email to a single email id...how can i address this issue.
    Sorry for 2 many questions,But unfortunately i never worked on email bursting.
    Thanks for your time.

    HI,
    it is not possible to use more than one Email-addresses.
    There is no user-exit for this stuff. The only thing i could imagine, is that you send the mail to a distribution list of your mailserver.
    May you can create a distribution List on Mailserver, add the receiptients to that list, and change the email-address in the attribute to the mail-address of the distribution list.
    Within SAP is no chance.
    best regards,
    Kai

  • Deletion Log for output types

    Hi all,
    Where can i find the deletion log for output types
    need to know the username and timestamp.

    Hi Mayank,
    some of the NACE settings are customizing.
    If you enabled the customizing change recordings (which should be ALWAYS enabled on dev system's client), you can browse the changes with the Change Log Browser of customizing tables
    To enable the client recording, please find
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/7e/c81ec852c511d182c50000e829fbfe/content.htm
    If recording was not enabled, no change logs are availible.
    You may reconstruct "old" values by drilling into (released) TMS customizing transports to see which values where included but that's pretty technical view of data.
    Best regards,
    Matthias

  • Need my log-in email changed but forgotten passwor...

    Hi,
    When I signed up to the BT website the email address I used was wrong, I had put [email protected] instead of [email protected]
    I just got a letter from BT (Ref: EB32) saying BT have been getting their emails and ebills bounced backto them because the email address I signed up with is incorrect. The problem is I can't log in to change it now as I have forgotten my password, when I click to retrieve my password it just sends a new password to [email protected] which doesn't exist.
    I phoned BT earlier today but the call centre guy didn't really seem to understand the problem and offered now help, please can someone who works for BT just change it for me, from my forum registered details you should be able to see me name otherwise I can message it.
    so i'm after a change from:
    [email protected] -------> to
    [email protected]
    Thanks
    (this is the log in to 'My BT' from the BT Broadband website)

    Hi Butters still no luck? call BT again and hopefully you will get through to someone that may be able to help or drop the mods a email to  [email protected] with a link to this post your account number,name etc,and also as you are changing email details you may need to supply your password security reminder ie mothers maiden name D.O.B etc.
    Im not sure how the mods will work on this one as you may be required to call in due to the nature of the change in asking for email address to be changed etc you may have to validate yourself via telephone.
    Good Luck!
    Inherent omniscience - the ability to know anything that one chooses to know and can be known

  • Need a program which finds out if a user has not logged for 3 days?

    HI,
       I NEED A PROGRAM WHICH FINDS OUT IF ANY USER HAS NOT LOGGED FOR THREE DAYS
        AND SEND A MAIL TO THE BASIS TEAM.IT SHOULD BE SHEDULED AS A BACKGROUND PROCESS.
    I SEARCHED IN GOOGLE BUT NOT ABLE TO FIND IT.
    PLEASE HELP ME OUT WITH THIS.
                    REGARDS,
                          MANI

    use table USR02 and analyse field field TRDAT
    X = sy-datum - usr02-trdat.
    -> if x ge 3...
    for mail use e.g. fm SO_NEW_DOCUMENT_ATT_SEND_API1
    hope that helps
    Andreas from germany

  • I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

    I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

    Hey tulgan,
    This link will provide information on what to do after you change your Apple ID:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?

    How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?

    If you have backup of your files, you can get your call history back as long as you sync iPhone with iTunes frequently.
    OK, the first thing you are required to do is close the function of "prevent iPhone from syncing automatically." in iTunes, avoiding to sync iPhone again.
    Now, connect your iPhone to pc and open iTunes.
    iTunes> preferences> devices
    All the backup data in iTunes will be displayed.
    Then,click the File menu and select Devices > Restore from Back up
    your iPhone will restart and you can find them back.
    This method only can find back the latest history, to get back the old, you should turn to a third party program for help.

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

    Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

    This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password.  Even with an Admin account you must have a password to install software.
    If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal.  When the Terminal window opens, at the cursor type exactly:
    resetpassword
    and press Enter.  When the Reset Password window opens, select the internal hard drive, and then the user account.  Type a new password twice, leave the Hint blank, and then Save.  Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
    Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
    And you have a new password for your account.

  • Can't find website and do I need an upgrade for emails?

    Hi There,
    I created my website in Muse greyowlenv.businesscatalyst.com and then earlier tonight upgraded my site and added my purchased domain www.greyowlenv.com. I also went to go Daddy and set the servers to worldsecuresystems. The trouble I am having is that when I type in my url www.greyowlenv.com I get directed to the Go Daddy site...see screen print. What else do I need to do to have it go live?
    Secondly, with my yearly Creative Cloud subscription I was told that included hosting and email accounts. But when I go to site settings there is no menu for email accounts. Am I needing to pay additional for this when I was told this service was included?
    Lastly, do I need to do anything with the ARecords, CNAME Records MX Records or Advanced DNS records? Because I found the instructions confusing???
    Your help getting the site up and running is graciously appreciated.
    Thanks, Carrie

    Hi Carrie,
    The url is coming up under www so I suspect possibly propagation which has since resolved.
    In regards to CC subscription you are correct that it comes with 5 entitled hosted sites on BC however the plan by default will be under "webBasic" and does not include email hosted service. 
    "What are the limitations of the Business Catalyst websites that come with Creative Cloud?
    You will be limited to 100 MB of storage and 1 extra user (could be your customer). You are not entitled to emails, SMSes or newsletters for this web plan."
    More details: http://forums.adobe.com/docs/DOC-2152
    Hope this helps!
    -Sidney

  • Please i need you to send me my verification email so that i can download apps..this is sooo annoying i've been waiting for email since last day..what happened APPLE???please fix this thank you.

    I NEED MY VERIFICATION EMAIL SO I CAN DOWNLOAD APPS I'VE BEEN WAITING FOR EMAIL SINCE LAST DAY..PLEASE FIX THIS HELP ME..THANK YOU

    This is a user-to-user forum hosted by Apple. You are only talking to other users here not Apple.
    If you you wish to talk to Apple Support use http://www.apple.com/contact/

  • Need help in AP Invoice Workflow for Email Notifications

    Hi,
    Kindly a Urgent help is needed in Oracle AP Invoice Worklfow
    There is existing functionality of Attribute Timeout Days for AP Invoice Notification is set as 3
    So there is requirement after Timeout of 3 Days 3 Times Emails needs to be send.How to approach for that scenation?
    Any help will be needful for me?

    Thanks.
    But i can not use this table to pass th value in BDC as i am using standard report RFBIKR00 to create BDC session which takes values from structures only like BLFA1,BLFM2,BLFB1 etc.
    I need such structure for email id field.

  • Need help to get processing log for mass invoice output

    Hi Experts,
    I have one requirement,
    My customer will send invoices to their customers in bulk on monthly basis. The customers will receive the invoices through emails, fax or printout. Now the issue is when they send the output to the customers there might be some failures in delivery because of some reason to some customers. I want to capture all the invoices, customers, medium and error text and want to display as a report.
    We can see the processing log for a single invoice in VBFA transaction but I want to display one consolidated list where the user can see all the error log records at one place.
    I know some tables where we can see some data in NAST, NACH but I would be greatful to you if you provide some more information about this.
    Please provide whatever info you have.
    Regards,
    Dileep.

    Hi Study abap,
    go through this code and use the HTEXT fm accordingly to ur requirement. This is just a sample kind of thing which will help u to write s-kunnr in htext.
    SELECT-OPTIONS: S_MATNR FOR PBIM-MATNR,
    S_WERKS FOR PBIM-WERKS.
    DATA: BEGIN OF HTEXT.
    INCLUDE STRUCTURE THEAD.
    DATA: END OF HTEXT.
    DATA: BEGIN OF LTEXT OCCURS 50.
    INCLUDE STRUCTURE TLINE.
    DATA: END OF LTEXT.
    DATA: BEGIN OF DTEXT OCCURS 50.
    DATA: MATNR LIKE PBIM-MATNR.
    INCLUDE STRUCTURE TLINE.
    DATA: END OF DTEXT.
    DATA: TNAME LIKE THEAD-TDNAME.
    SELECT * FROM PBIM WHERE WERKS IN S_WERKS.
    MOVE PBIM-BDZEI TO TNAME.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT = SY-MANDT
    ID = 'PB'
    LANGUAGE = 'E'
    NAME = TNAME
    OBJECT = 'PBPT'
    ARCHIVE_HANDLE = 0
    IMPORTING
    HEADER = HTEXT
    TABLES
    LINES = LTEXT
    EXCEPTIONS
    ID = 1
    LANGUAGE = 2
    NAME = 3
    NOT_FOUND = 4
    OBJECT = 5
    REFERENCE_CHECK = 6
    WRONG_ACCESS_TO_ARCHIVE = 7
    OTHERS = 8.
    LOOP AT LTEXT.
    IF LTEXT-TDLINE NE ''.
    MOVE LTEXT-TDLINE TO DTEXT-TDLINE.
    MOVE PBIM-MATNR TO DTEXT-MATNR.
    APPEND DTEXT.
    ENDIF.
    ENDLOOP.
    ENDSELECT.
    LOOP AT DTEXT.
    WRITE:/ DTEXT-MATNR, DTEXT-TDLINE.
    ENDLOOP.
    Kindly reward fi found helpful.
    cheers,
    Hema.

  • No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.

    I start noticing that I do not see any denied traffic coming in on my ACL.  To better explain, lets say I have this config.
    ### Sample Config ###
    object network webserver
    host 192.168.1.50
    nat (dmz, outside) static X.X.X.X service tcp www www
    access-list inbound extended permit ip any4 object webserver eq www
    If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
    Phase: 1
    Type: CAPTURE
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    MAC Access list
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    MAC Access list
    Phase: 3
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         Outside
    Result:
    input-interface: Outside
    input-status: up
    input-line-status: up
    output-interface: Outside
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
    Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
    My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version? 
    Any comments/suggestions are gladly appreciated :)
    Regards,
    John

    I believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done.  In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched.  So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
    As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either.  My guess is that there is no way around this...at least no way I know of.
    Please remember to select a correct answer and rate helpful posts

Maybe you are looking for