Log in Console from failsafe mode Solaris 10

Hi there,
Is there anyway I can log in console as root from the failsafe shell prompt? I need to log in to adjust my monitor preference before the main program starts. And the log in that appears briefly before dtlogin is so quick and i can't possibly type my log in as root and all the commands befor the desktop starts. (I have like 2 seconds to do it!) Any help will be great appreciated
Many thanks,
J.J.

Nope
it only says boot not found. :(I asked you a question above that was not answered:
Is this SPARC, x86 with original Solaris 10 (FCS using DCA), or x86 with a later release of 10 (using GRUB)?
Darren

Similar Messages

  • Issues logging back in from sleep

    Hi, I have a Macbook running Leopard (upgraded from a previous Tiger installation) 10.5.5. Sometimes when I log back in from sleep mode, the screen flickers and the log in box disappears. To get it to reappear so I can log back in, I have to close and open the Macbook again. Sometimes when the log in box disappears, the Macbook stops making any sound whatsoever. Yesterday, the Macbook screen suddenly went black and the hard drive made the usual "waking up from sleep" grinding noises several times in a row. I closed it and after a while, it stopped grinding and rebooted. Any ideas?

    Hello,
    Try resetting the System Management Controller
    Carolyn

  • How to mount USB & CDROM drives from single user mode - Solaris boot disk?

    Hi All,
    I need to carry out ufsrestore on a single newly replaced system disk (no redundancy / mirroring) from either USB or CDROM drives from the following steps:
    ( i ) GRUB => e, e, cdrom –s, Enter, b (boot from Solaris 10 x86 media).
    ( ii ) Choose menu 1 for Install Solaris Interactive Mode to reach single user mode.Below are the commands that I have tried in single user mode without success:
    mount –r –F pcfs /dev/dsk/c1t0d0p0 /cdrom (after unmount Solaris CD)
      mount: /dev/dsk/c1t0d0p0 is not a DOS filesystem.
    svcadm –v enable smserver
      svcadm: Pattern ‘smserver’ doesn’t match any instances
    svcadm enable autofs
      svcadm: Pattern ‘autofs’ doesn’t match any instances
    devfsadm
      devfsadm: mkdir failed for /dev 0s1ed: Read-only file system
    mkdir /mnt
      mkdir: Failed to make directory “/mnt”; Read-only file systemPart of the problem is due to the current READ ONLY filesystems which does not allow the creation of mount point such as /mnt.
    I have been able to create both / root (/dev/dsk/c1t0d0s0) and /export/home (/dev/dsk/c1t0d0s0) filesystems with newfs that are awaiting for restore using ufsrestore.
    The only option I am left with is to attach a secondary disk to install Solaris 10 on either of them before bring the system to multi-user mode so that service such as volmgt, autofs, volfs are available to access USB & CDROM drives.
    Any suggestion on how to resolve this issue?
    Many thanks,
    Jack

    Hi JKGN,
    Is the directory a located under the root filesystem. ie /a? Are there any other mount point for say USB drive as well? I am not in a position to try it out right now but will get back
    to you soon on whether /a exist or not.
    Btw, the last thing I managed to do on this system at the time was added a secondary 1TB internal disk with the intention to restore both / and /export/home data onto this disk while
    making use of all the disk device management services such as the following services only available in a fully installed Solaris system (both single & multi-user modes) installed on the
    primary disk:
    # svcs smserver
    STATE          STIME    FMRI
    online         Jun_08   svc:/network/rpc/smserver:default
    # svcs autofs
    STATE          STIME    FMRI
    online         Jun_08   svc:/system/filesystem/autofs:default
    # devfsadm
    # iostat -En
    c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: ATA      Product: SAMSUNG HD321KJ  Revision: 0-11 Serial No: 
    Size: 320.07GB <320072932864 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 41 Predictive Failure Analysis: 0
    c0t0d0           Soft Errors: 0 Hard Errors: 5 Transport Errors: 0
    Vendor: PHILIPS  Product: DVD+-RW DVD8801  Revision: AD21 Serial 
    Size: 17.54GB <17538875392 bytes>
    Media Error: 0 Device Not Ready: 5 No Device: 0 Recoverable: 0
    Illegal Request: 10 Predictive Failure Analysis: 0
    c2t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: JetFlash Product: Transcend 16GB   Revision: 1100 Serial No: 
    Size: 0.00GB <0 bytes>
    Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
    Illegal Request: 7 Predictive Failure Analysis: 0
    # rmformat
    Looking for devices...
         1. Volmgt Node: /vol/dev/aliases/cdrom0
            Logical Node: /dev/rdsk/c0t0d0s2
            Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0
            Connected Device: PHILIPS  DVD+-RW DVD8801  AD21
            Device Type: DVD Reader/WriterHowever, I was disappointed that "iostat -En" has not found the secondary disk (1 TB) even though it was available earlier, for Solaris installation as the only disk on the same system.
    As a result, I am left with no option but the need to rebuild this system with only a single primary disk while in single user mode. However, the single user mode that I am in is the
    one from Solaris installation disk with restrictive (_cannot create folder for mount point or running disk management utilities_) capability such as those services just covered, compared to one from a completed Solaris installation system with full access to all filesystems and utilities / commands in general.
    I would very much value your assistance on how to mount both CD & USB in this restrictive limited Read Only OS (assume that it is running from memory) in order to get complete access to
    the blank primary disk so that full restore with ufsrestore could take place.
    Thanks in advance,
    Jack
    Edited by: 797805 on 9/06/2012 04:15

  • When trying to log back from sleep mode, the screen behaves as a rotating cube, with the mouse pointer in the top left corner. Hangs.

    iMac OS X Ver 10.7.3
    21.5 Inch, Mid 2011
    2.5 FHz intel Core 5
    12 GB 1333 MHz DDR3
    When the computer in woken from sleep mode we see two login options (bineg used by two users).
    But when we try to login, the screen just behaves as a sluggish rotating cube.
    Nothing works, we just have to hard boot at this time.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My imac freezes , need to restart everytime i wake it from sleep mode. just started happening 2 weeks ago.

    For about 2 weeks whenever I return to my imac and tap the mouse to wake it from sleep mode my screen is frozen. I have tried to wait for it to unfreeze but it doesnt wake. I cannot get any results from using the mouse or the keyboard. I always have to hard reset the computer to be able to use computer again. My mac is a year old. Anyone have any thoughts as to why tis is happening? Thanks

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • How to force a failsafe mode in runlevel 3 (kdm) [SOLVED]

    This is probably quite basic but I am wondering how I can get a console after X is hanging (last xorg-server update with catalys). The usual  c-m-f1 is not working. I don't seem to be able to kill X with c-m-delete either.
    I would like to force a runlevel 3 session.
    I don't seem to be able to get a console even in failsafe mode. I am using kdm as a daemon in rc.conf.
    I have tried with the live cd but then I don't know how I can mount my lvm partition (which is not seen as a device).
    Thanks for any help.
    Last edited by PierreR (2009-08-29 09:23:15)

    PierreR wrote:I don't seem to be able to get a console even in failsafe mode. I am using kdm as a daemon in rc.conf.
    that's the main reason you can't enter in runlevel 3. that daemon will run on every runlevel excepting runlevel 1. how can you fix this?
    when you are on grub menu, type "e" and then select the kernel line and type again "e" then append to that line, at the end, "init 1", enter to make the changes and then hit "b"
    after you type root password, edit rc.conf and remove kdm from there. after you fix your xorg, use /etc/inittab way to start kdm
    Last edited by wonder (2009-08-29 09:04:06)

  • Can not login to console from N1

    Hi Guys:
    I installed N1 in an x4200. In the same local network, there is a T2000 which can be discovered by N1. When clicking "open serial console", I can only login console in read-only mode.
    You know, when I connect the T2000 ALOM from a terminal, and then enter "console -f", I can login in the console in read-write mode.
    How can I login the T2000 serial console from N1 with read-write mode?

    Hi
    A workaround is just to use a terminal to connect to SP of that box (which frankly is the same what N1SM does these days using a java telnet/ssh plugin) - either using ssh or telnet
    Otherwise open up a call with Sun and log an escalation ... if you have a business reason for this problem, I guess you will be given a patch
    (I can reproduce this on a T1000 , frankly latest development of N1SM is xVM Ops Center and they dropped this feature afaik )
    L

  • MacBook pro 17" will not wake from sleep mode

    Ok so my MacBook Pro 17" with osx 10.6.8 will not awaken from sleep mode. when attempting to wake it up the screen dosent come on and the mouse and keyboard do not receve any power. to get back on the computer i have to force a hard restart by holding the power button for 10 seconds then pressing it again. then it boots to where i left off when i closed the lid. i have read a few forums about this problem and i have went through all the steps of reseting various things and went as far as going into terminal using sudo to disable safe sleep and nothing helps. i noticed an unusual error in my console. here is a  copy of my console log. the one in question is  {7/14/13 4:52:43 AM com.apple.UserEventAgent-Aqua[118] dontAutoLoad = EMPTY!}  someone please help me I am over 150 miles from the nearest apple store or authorised retailer

    Active Profiles:
    Battery Power                    -1*
    AC Power                    -1
    Currently in use:
    halfdim          1
    sms                    1
    hibernatefile          /var/vm/sleepimage
    gpuswitch          2
    disksleep          10
    sleep                    0 (imposed by 223)
    hibernatemode          3
    ttyskeepawake          1
    displaysleep          5
    acwake                    0
    lidwake          1
    Also I broke down and called support again this time a senior advisor's boss recorded the events and sent the data to their "engineering department" still waiting on the results hopefully they will get back to me sometime between today and saturday. will post the results of the tests. also this is a 2011 17in intel i5

  • Syslog locks when switching logs without console

    Hi all,
    We are comming across a problem in one of our Solaris 2.6 machines. When the script newsyslog switches the logs for syslogd, this process stops writing in the messages files. This happens when newsyslog is executed not having a console open in the machine. Besides whe get the following message in the console from time to time:
    INIT: Command is respawning too rapidly. Check for possible errors.
    id: sc "/usr/lib/saf/sac -t 300"
    So it seems that for any reason sac is not able to start and that is blocking the correct start of syslogd, maybe?
    I would appreciate any help. Regards,
    Jorge

    Mine does it too. It to do with your security settings. I believe you'll have to disable the 'Remote Lock' you have in the screen shot. Bit of a pain, but addded security if you lose your phone I guess.
    Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
    N8-00 Tesco UK 059C951, Lumia 920

  • Snow Leopard won't always wake from sleep mode

    Most of the time the system functions fine, but at least once a week, I cannot wake it from sleep mode using the mouse, space bar, or keys. I have to do a hard reboot, which I don't like doing. Are there settings I can adjust properly (Energy Saver or Computer Sleep time or Display time) to stop this from happening? Should it take a few seconds after I hit the space bar?
    Or should I just shut it down at night or for periods of several hours?
    Is there anything wrong with never letting it sleep? Thanks!

    Interesting how a common thread I see on these failures is 4GB ram upgrades. I too have a 4GB aftermarket RAM kit in my late 07 black MB. No issues with this machine, having this exact hardware / RAM configuration for 1+ years. My problems started about the time I ran the 10.5.6 upgrade, which may or may not have included a firmware update.
    I would be inclined to think memory timing issues or undervolting the RAM during sleep which causes it to corrupt. Perhaps the OEM RAM modules are looking for different timings / voltage than Apple provided RAM modules.
    All said, I am VERY confident this is not a hardware defect but instead firmware related. It doesn't appear to be OS related as none of these failures are making it into the console logs - the machine is asleep, deeeeep sleep. For all intents when it starts it is as if it lost complete power and starts from hibernation file (or starts from scratch if you didn't have a hibernation file...

  • Question about a log in Console after installing iTunes update

    After installing iTunes I noticed these logs in Console:
    11/29/12 6:11:47.673 PM sudo[1485]: root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.8WAxMg/Scripts/com.apple.pkg.MobileDevice.hTs dtR ; USER=XXXXXX ; COMMAND=/bin/launchctl load -w //System/Library/LaunchAgents/com.apple.MDCrashReportd.plist
    11/29/12 6:11:47.691 PM sudo[1487]: root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.8WAxMg/Scripts/com.apple.pkg.MobileDevice.hTs dtR ; USER=XXXXXX ; COMMAND=/bin/launchctl start com.apple.MDCrashReportd
    I noticed that they have something to do with Crash Reporter, but are they a crash, or some command to the file during the install of the update? Any insight from someone who understands the terminal commands would be appreciated.
    Thanks,
    Scott

    The Safe Mode startup key combo is the same; Startup key combinations for Intel-based Macs, it just isn't working for you.
    I suggest starting from the Install DVD that came with your iMac. Once in the Installer you will find tools in the Utilties menu. Using the Disk Utility try repairing the startup volume.

  • MacBook Pro doesn't wake up from sleep mode

    My MacBook Pro (late 2011) with OS Mavericks doesn't wake up from sleep mode anymore. Battery is fully charged and the cable is plugged in. I can still hear the ventilator running, but that's all. I never had any problems, but since about 2 weeks this problem occurs. It usually then woke up after 10-15min, but now nothing happened since 4 hours.
    Is there anyone who could possible help me? Unfortunately there is no Apple Store in my area where I could go to.

    Step 1
    Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
    Step 2
    If you're running OS X 10.8.5 or earlier, from the menu bar select
               ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
              Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
               ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
    Step 3
    In the Energy Saver pane of System Preferences, uncheck the box marked
              Put hard disks to sleep when possible
    Step 4
    This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    Step 5
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
    In the search box in the window's toolbar, enter "powerd" (without the quotes.)
    You may see one or more lines like this:
    com.apple.message.signature: Platform Failure
    If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Rainbow wheel keep spinning from sleep mode

    Imac rainbow wheel keep spinning coming from sleep mode with no end in sight. I have to turn it OFF and ON again in order to have it working.

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

    One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

    I am having the same problem; it started about 24-36 hours ago.
    I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
    iPhone -- returns incorrect ID / Password
    iPad -- Same
    Mail.app on Mac -- returns incorrect password error
    icloud.com -- allows me to log in and use all functions accept mail.  When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
    I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode.  They generated a new strong password and sent it on to "Engineering."
    I suspect there are a small number ofo users like you who are affected with the same problem I am.  Too small a number for it to be reported as an outtage.  I suggest you call Apple and open a case to have your mail investigaged.
    Hope this helps...

  • IMac will not boot from any mode except Target Disk

    I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
    I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot,  and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
    I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
    I reformatted the HD and installed 10.7 again, it still freezes up at the same point. 
    I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
    I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
    UPDATE...
    Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own.  I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
    I did manage to have it start one time got a copy of the  the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
    Specs...
    The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
    Error Report…
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

    Here is the complete error log...
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80602db800 : 0xffffff801a41d5f6
    0xffffff80602db870 : 0xffffff801a4b7b95
    0xffffff80602dba40 : 0xffffff801a4ce4ad
    0xffffff80602dba60 : 0xffffff7f9bab8654
    0xffffff80602dbb60 : 0xffffff7f9baa218c
    0xffffff80602dbbb0 : 0xffffff7f9baa20e2
    0xffffff80602dbbd0 : 0xffffff7f9ba73554
    0xffffff80602dbc00 : 0xffffff7f9aa8d470
    0xffffff80602dbc40 : 0xffffff7f9aa8d3df
    0xffffff80602dbc60 : 0xffffff7f9aa926ec
    0xffffff80602dbcf0 : 0xffffff7f9aa8af20
    0xffffff80602dbd20 : 0xffffff7f9aadacc7
    0xffffff80602dbd70 : 0xffffff801a833b9b
    0xffffff80602dbdc0 : 0xffffff801a862d57
    0xffffff80602dbe30 : 0xffffff801a497cef
    0xffffff80602dbe80 : 0xffffff801a420abd
    0xffffff80602dbeb0 : 0xffffff801a410448
    0xffffff80602dbf00 : 0xffffff801a4195fb
    0xffffff80602dbf70 : 0xffffff801a4a5ad6
    0xffffff80602dbfb0 : 0xffffff801a4ced13
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
             com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
             com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12B19
    Kernel version:
    Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
    Kernel slide:     0x000000001a200000
    Kernel text base: 0xffffff801a400000
    System model name: iMac8,1 (Mac-F227BEC8)
    System uptime in nanoseconds: 26349024446
    last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMuxControl          3.2.6
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.GeForce          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.1
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.driver.AirPortBrcm43224          600.36.17
    com.apple.iokit.AppleYukon2          3.2.3b1
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleUSBUHCI          5.1.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
    Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-875
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
    USB Device: Trackball, 0x046d  (Logitech Inc.), 0xc404, 0x1d120000 / 4
    USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

Maybe you are looking for

  • Installing Tiger into new Macbook Pro with Leopard

    I bought a new MBP with 10.5.2 leop. installed but i need to revert to Tiger. I cant seem to get the Tiger retail disk to install and tech support is baffled too. To make matters worse, according to my serial #, they say my MBP shipped with Tiger so

  • FCE on a G4 Mini?

    I have a G4 Mac Mini, 1GB RAM with tons of disk space vie FW400. Is FCE usable on this computer? I will only be editing SD material from a mini DV camera. I want to move to FCE as soon as possible but don't want to buy a new computer until Feb 2007.

  • How to read the extension .RNO files.

    Guys.. We are implementing B2B scenario , We are getting .RNO file with Rossettanet, Preamble, ServiceContent, OrderCreate, and DigitalSignature  tags in it. Once XI got .RNO file, XI needs to map with ORDERS05 and send to R/3. Can any one explain me

  • Outbond interface programme to upload customer master data.

    Hi experts,           i need to develop an outbound interface programme to upload customer master data,which will be received from sap and posted to web methods using standard function mudule.can any one help me?

  • TS1424 what is error -1450?? and how do I solve it?

    I tried downloading a movie from the itunes store.  It shows up with a ! in the left column. When I go through the steps to eliminate the ! I get a message saying I have an error -1450. When I googled the error nothing came up. Can someone help?