Log in! Help Me Please!

I have a Satellite L300-13R. when i switch the laptop on, the toshiba screen and then the Microsoft Corporation (with loading bar) appear. at the same time, i know that the hard drive is working as i can hear it.
Shortly after this, the screen goes off for maybe 2 seconds and then turns back on to stay black.
I can see the cursor and am able to move the cursor but i cannot do anything else.
the laptop will load in safe mode but im unable to load it normally.
is there anything i can do?
Solved!
Go to Solution.

I said nothing about Safe Mode. Please reread what I wrote (below). There is no need for an installation DVD.
If at some point you cannot proceed, tell us exactly what you see.
And maybe this helps you locate the System Recovery Options menu.
   How to launch the Windows Recovery Environment
--------------------8<------------------- <snip> --------------------
Try this. Turn the computer on and immediately press and hold the F8 key.
On the Advanced Boot Options menu, choose Repair Your Computer.
When you reach the System Recovery Options menu, choose Startup Repair.
If that doesn't do the trick, go back to the System Recovery Options menu and do a System Restore.
If that doesn't fix things either, go back to the System Recovery Options menu, choose Command Prompt, and follow the directions here
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair start...
--------------------8<------------------- <snip> ------------------
-Jerry

Similar Messages

  • Help me Please.. I can log on to the Apple website to manage my account and all the information is correct, but I get "Your Apple ID has been disabled" when I try to get something from App Store on my iPad

    Help me Please.. I can log on to the Apple website to manage my account and all the information is correct, but I get “Your Apple ID has been disabled” when I try to get something from App Store on my iPad3
    I'm from poland.
    Thx
    Balbi

    Contact iTunes Customer Service and request assistance...
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • TS1368 I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

    I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

    I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

  • Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard

    Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard
    Regards,
    Amar

    See the "More Like This" section over there ===============>
    In the future, search before posting.

  • WLC Logs!!! Quick Help needed please!

    Hello,
       My client want to check who owned a certain IP address on the WLC and from which AP he was associated. I looked at the system logs in the GUI but couldn't get beyond 6 hours. Is there a place I can download last day logs from CLI/GUI? Or Can I login via SSH and extract the logs via CLI?
    Please this is vital and I appreciate your help,
    Regards,

    Please note that the customer is using Pass-Through Web Authentication for the Guest WLAN.
    Thanks,

  • Hi, I already installed photoshop trial version and three weeks later I paid on-line for 300 Baht for buy it but it still ask me to join and pay for it.  How can I update it in my log in account. Please help.

    Hi, I already installed photoshop trial version and three weeks later I paid on-line for 300 Baht for buy it but it still ask me to join and pay for it.  How can I update it in my log in account. Please help.?

    You do not buy Photoshop for 300 baht, you are renting it for that much a month. You set up an account with a valid credit card and to see if it is active, you go here. https://www.adobe.com/account/my-products-services.html  Look under my Subscriptions.
    If all is good, then with the same Adobe ID/password, select "License this Product" and sign in, or Help > Sign in.
    That will license it.
    Gene

  • Logging into creative cloud library in photoshop ????? looking all over for it, I'm logged in on the desktop app but it still dons show as logged in in photoshop. please help

    logging into creative cloud library in photoshop ????? looking all over for it, I'm logged in on the desktop app but it still dons show as logged in in photoshop. please help

    Window > and select Libraries By default it should appear in the tabbed panels above the layers panel with adjustments and styles

  • I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

    I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

    http://www.cultofmac.com/247979/whoops-reconnect-your-bluetooth-keyboard-and-mac -after-logging-out-os-x-tips/
    had the same problem and it worked!

  • Security Question not appearing in Log on help

    Hi,
    I have done all the settings from my end to enable security questions in Log on help at the time of password reset by user.
    But still it is not asking for a security question at the time of password reset by an existing user.  It is still asking for user id , first name, last name, and email  and the passord is sent. Settings I have done as follows:
    1> Ume.logon_help.securityquestion = true
    2> In UME configuration also I have checked Enable security questions also.
    3> Instances restarted
    But after that also when resetting the password from Log on help it is not asking for a security question.
    Please note that i want to do this for existing users also.Also don't know how to maintain the security question and answers for them as I have also introduced selfmanagement for them. But can't find the place to maintain it.
    regards
    Chandu

    Hi Shanti,
    Thanks for your reply.
    I have already done everything to configure self-management. But when I search for a user in Useradmin I  am not finding the place where I will maintain Security question and answer. More over when I am resetting a password it is allowing me to reset that without asking security question.
    Thanks

  • Too large java heap error while starting the domain.Help me please..

    I am using weblogic 10.2,after creating the domain, while starting the domain,I am getting this error.Can anyone help me.Please treat this as urgent request..
    <Oct 10, 2009 4:09:24 PM> <Info> <NodeManager> <Server output log file is "/nfs/appl/XXXXX/weblogic/XXXXX_admin/servers/XXXXX_admin_server/logs/XXXXX_admin_server.out">
    [ERROR] Too large java heap setting.
    Try to reduce the Java heap size using -Xmx:<size> (e.g. "-Xmx128m").
    You can also try to free low memory by disabling
    compressed references, -XXcompressedRefs=false.
    Could not create the Java virtual machine.
    <Oct 10, 2009 4:09:25 PM> <Debug> <NodeManager> <Waiting for the process to die: 29643>
    <Oct 10, 2009 4:09:25 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
    <Oct 10, 2009 4:09:25 PM> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>

    Thanks Kevin.
    Let me try that.
    Already more than 8 domains were successfully created and running fine.Now the newly created domain have this problem.I need 1GB for my domain.Is there any way to do this?

  • HELP ME PLEASE!! Why doesn't my Epson CX6400 Driver install?

    My printer quit printing last week.It still works because I tested it with my husband's laptop.I have downloaded a new driver from the Epson website and it does not install,it asks me for my password.I am the administrator and it says"this software needs administrative rights or higher" or something to that effect,anyway since it does not work with my password, THE only password I have,I tried changing it with the install cd 1 and after I changed both my password and the root administrator password,it still does not install,not even when I try to install the driver with the original CX6400 software cd.HELP!!!!!!I have already paid Apple support $49.99 and they cant seem to help because they say its an Epson issue and Epson support(REALLY NICE,compared to the snots at Apple!) says its an Apple issue......HELP ME,PLEASE!!!!!
    imac Mac OS X (10.3.9)
    imac   Mac OS X (10.3.9)  

    Hi Maclapa!
    Do you have more than one account on the Mac?
    Are you sure that you are logged in with an Admin account?
    Have you run Repair Permissions?
    TO REPAIR PERMISSIONS ON THE STARTUP DISK
    1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
    2.Click First Aid.
    3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
    Rerun RP until the only message it reports is:
    "We are using special permissions for the file or directory ./System/Library/Filesystems/cd9660.fs/cd9660.util.
    New permissions are 33261"
    This is a status message and not a cause for concern. You may safely ignore it.
    Or these:
    "We are using a special uid for the file or directory ./private/var/at/jobs. New uid is 1"
    "We are using a special uid for the file or directory ./private/var/at/spool. New uid is 1"
    Again, these are status messages, which appeared after Security Update 2005-001.
    There may be others that you can ignore. Complete list at link below.
    Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
    When "Repair Permissions" is complete. Quit "Disk Utility".
    ali b

  • I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Help me please: use my own new account

    I have registered with you for Skype.  Previously my son registered but has not used this for quite a while. You have accepted my skype name and password and notified me but when I try to go on to skype my son's name and details etc. still appear.  Help me please.
    My son no longer uses this skype.

    Hi, huskyruth35, and welcome to the Community!
    As your enquiry was not directly related to where you had posted your message, I arranged to transfer your post to create its own new thread or line of conversation.
    How to fix this: when you son's account automatically starts when you start Skype, at the top left corner of the Skype window, click on Skype -> Sign Out.   Quit Skype.  When you re-start Skype, in the sign-in window which appears, un-tick "Sign me in when Skype starts" and enter your own log-in credentials (account name and password).
    That should do it!
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Hey i forgot my secret ID question help me please

    i wanted to buy a proggrame at app store then it asks me to answer the secret questions but i dont remeber it & when i log on my account i click on send me an mail to reset my secret question it send mail to an old email that i made & i dont remeber anything about it so could u help me please.
    <Email Edited by Host>

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
    If you don't have access to your current rescue email account then you will need to contact iTunes Support / Apple in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Somebody help me please!!!

    My BlackBerry Curve 8250 drained early hours yerterday morning and ive had it on charge ever since and it still hasnt turned on, i have " batteries that have drained and dont no how to get them working again, please can somebody explain how to get my phone up and running again

    Do a simple reboot on the BlackBerry in this manner:
    With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
    Now, try your Call Logs again.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Hi, I have had my MacBook Pro stolen and the police have mentioned about using iCloud to see if I can track it's whereabouts - however I have no idea if I had iCloud on my MacBook or how to track it if I did - can anyone help me please? Thanks :)

    Hi, I have had my MacBook Pro stolen and the police have mentioned about using iCloud to see if I can track it's whereabouts - however I have no idea if I had iCloud on my MacBook or how to track it if I did - can anyone help me please? Thanks

    Welcome to the Apple Support Communities
    To see if you have iCloud, open http://www.icloud.com and log in with your Apple ID. If you can access to iCloud, you have iCloud. If you get an error message or you can't access, you don't have iCloud. This only works if you only have the Mac (not an iPhone, iPod touch or iPad with iCloud).
    Apart from that, "Find my Mac" must be turned on in the Mac in order to track it, so if it wasn't turned on, you won't be able to track it. If it was turned on, the computer must be connected to the Internet to be tracked.
    If you can access to iCloud through http://www.icloud.com, choose "Find my iPhone" and look at the Devices list. If your MacBook Pro shows up, "Find my Mac" is turned on, so see if you can track it and tell to the police that it's possible to track your MacBook Pro

Maybe you are looking for