Log-in won't load?

I just downloaded the free upgrade (OS X Yosemite) from the App Store. When I went to log in to my computer in gave a black loading bar (that loads about 1/4 of the way) and switched to a blank white/greyish screen. I've tried waiting - for about an hour - but it did nothing. I don't know what's wrong with it?

Hi KurraGurrl,
Thanks for visiting Apple Support Communities.
It sounds like your Mac was updated to OS X Yosemite, but is now only displaying a blank screen.
I recommend going through the first three sections of this troubleshooting article:
Mac OS X: Gray screen appears during startup
Disconnect, test peripheral devices and network cables
Perform a Safe Boot
Reset the NVRAM / PRAM
These are the best steps to try first if your Mac does not boot to the desktop.
Best Regards,
Jeremy

Similar Messages

Can't log in - desktop won't load

Hi, and thanks for reading this. I hope someone here can help me.
I have a G4 flat-panel iMac, running 10.2.8. Bought brand new in 2002 and have had no problems, with the exception of the hard drive going out a few months later and replaced under warranty. (Apparently a few of the dual-boot machines had this problem.) They also upgraded the OS to 10.2.8 and the computer has run beautifully ever since. Until the other night.
I was online and the modem disconnected but Internet Connect kept displaying "Disconnecting". This happens on occasion and the only way out of it is to shut down the computer and restart. So I did, and when the computer restarted I could not log in. The computer started as usual and seemed fine, the log-in screen appeared, I entered my password, the computer said "logging in", a blue screen appeared briefly... and then kicked back to the login screen. The desktop never appeared.
After several tries of that, I decided to reset my password (with the system CD). It let me reset my password and the computer recognized the fact I had changed my password. (You know how the log-in screen "shakes" to signal a wrong password - that never happened.) I tried to log in again and it said "logging in"... and returned to the log-in screen. The same thing happened when I tried the root user account.
I was able to start up from my Norton CD and changed the startup disk to 9.2. In 9.2, I can see the contents of my hard drive including my User folder in OS X and everything that had been on my desktop in OS X is right there in the "desktop" folder for my user name. I can move, copy, and delete things there. It's all there; the desktop just won't load when I start in OS X.
I don't know if it helps, but in 9.2, the computer recognizes my ZIP drive, CDs, and my Wacom tablet and mouse.
I have gone through the discussion boards and articles here and cannot find where anyone else has had the exact same problem. I have tried the possible solutions below, and none of them have changed anything:
* Norton Utilities (Disk Doctor) - fixed some minor errors, then ran it again and no problems were found.
* Safe Boot - I couldn't get the mouse to work, and when I figured out the keyboard "shortcuts" to log in, I got the same thing as before... "logging in" and then getting kicked back to the log-in screen.
* Disk Utility (from the Mac OS X install CD) - it fixed a couple things then said that my hard drive appeared to be okay.
* fsck (single-user mode) - it said that "Macintosh HD appears to be OK". So at least the hardware seems okay.
* Rebuilding desktop - a long shot but I figured it was worth a try; nothing changed.
* Reset privileges (single-user mode) - as far as I can see, nothing changed even after doing this.
* Startup items (folder) - nothing seems out of place.
* Disable log-in items - I still couldn't log in
* In single-user mode: when trying one of the suggestions from an article here, I typed "cd/Users/{my user name}/Library, then mv Preferences Preferences_old, and received a message stating "no such file or directory."
Looking through the contents of my hard drive, I can see that there is a Desktop icon for OS 9, but not anything for OS X. In theory, shouldn't there also be a desktop icon for OS X? Has my computer somehow lost its "connection" or "map" to my OS X desktop? I ran fsck again today so that I could look at logs/parse failed/plist/etc (an article I found here on apple.com) and following those steps, I noticed there was a line that said "root device is mounted read-only." So I can only assume that has to do with the fact my OS X desktop doesn't load.
So, with all that being said (it's a lot, I know, and I hope it all makes sense) ... Is this problem something simple that I can fix myself, or do I need to take it into the shop and have a technician look at it? As you can imagine, this is all getting very frustrating, with limited access to an old version of Photoshop, SimpleText, and a very old web browser that only works on a few sites (and thankfully Apple.com is one of them). I miss my OS X.
Thanks again for reading this, and for any advice/assistance you may be able to provide.

Thanks, Anna. Excellent work. Everything seems fine, except, of course, the booting OS X part.
First try Resetting the PRAM
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately and allow computer to boot.
The fact that you can boot in Safe Mode suggests that you may have a Login item that conflicts with the startup process. If resetting PRAM does not work try this:
Boot computer in Safe Mode.
If you are able to get into the Login items (Apple Menu > System Preferences > Accounts > Login Items) make a note of all the log in items (write it down). Then delete them all by selecting each one in turn and clicking the minus sign under the list. Shut down and try booting the computer normally. If you are able to boot successfully add the Login items on your list one by one and try rebooting each time you have added one. This should help you isolate the offending item.
I hope one of these methods works. Post back and let me know.
cornelius

Firefox won't load parts of web pages or let me log into certain websites

I don't quite know how to really explain this, so I'll provide two examples of the problems I'm experiencing:
The first is that, whenever I go onto any of those Wikia sites, Firefox doesn't seem to load anything other than the main page content. By this, I mean that it won't load any "Recently edited/added pages" box or "Recently uploaded images" box on the right hand side of the page, nor will it open the Contents tab to navigate different sections of the main page content itself.
Another problem I'm having is logging in to a website I usually frequent. It uses Facebook, Twitter and/or Google+ to log in, and the site has recently started running on Flash and Silverlight. Up until a few weeks ago, I am unable to log in to this website for the same reason as the example above - it just doesn't seem to load after clicking to log in, yet the rest of the site is fully functional.
In regards to the former example, I did manage to do something with Java that managed to fix it, however when attempting to emulate the solution when it happened again, nothing happened. I'm unsure of what the problem is. Can someone help?

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can open the Web Console (Firefox/Tools > Web Developer).
Check on the Network tab if any content is blocked and has a file size 0 (zero).
*https://developer.mozilla.org/Tools/Web_Console

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?

After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?

so your starting it up and its just crashing right away, yes? can you tell me what app it acutally is? as iOS6 is so new my thought would be that its probably incompatable with it at this time, im having trouble with my networks app that just will not let me log in at all!
id suggest going to the page of the app on the app store and look to see if it says if its compatable or not? as for a error log its in usage data, which is in settings > general > about, and i think its near the bottom.

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox

Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox account, no password prompted and account is online and enabled... Thoughts?

Have you tried clicking on the lock to see it it will then ask for a passwored. Otherwise, try reblooting.

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.

Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?

Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

Specs:
iMac 10.8.5
3,4 GHz Intel Core i7
32 GB 1600 MHz DDR3
Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
I tried restart my iMac and when I was logged back in, my dock preferences were reset.
Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
When I tried opening it, it said the file was damaged and could not be openend.
I tried opening it with AE or importing the file in a new project but nothing helped.
When I tried looking for autosaves, this is the really weird part, there were none.
Even though there are autosaves from my other projects, this one was completely gone.
It looked like the day before never happened on my computer.
Also when I openend Premiere all the recent projects had been wiped.
So at first I thought it was a Premiere Pro failure.
But than, later on the day, I tried loading some RAW files from my compact flash card.
This is where I would get an error (error -36) which said some data cannot be read or written.
I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
But when I tried moving the files to an other folder the same error occurred.
While dealing with this issue I wanted to put on some soothing music on youtube.
This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
Just like my system preferences, all the preferences I had with Chrome where also reset.
Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
Some background info which could be helpful for solving this mystery:
two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
I got it replaced by a qualified apple repair store.
When I got my computer back, all the files where gone.
I got on the internet without AdBlock installed yet.
A game or whatever it was, can't clearly remember, got installed by accident.
I deleted it immediately.
Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username.
So I brought my mac back to the store.
Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
I asked him; could it be a virus? He replied no way.
I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
Could this be the work of a virus or a malware? Or is it a disk permissions issue?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Firefox won't load google image search results

Firefox won't load google search results. It will load the page of results with the thumbnails etc. but if you click any of them, just a loading spinning icon appears on the tab and it never loads.
I have tried:
Both logged in and out of google account,
All other areas of google work with no problems (news, shopping etc.),
Site working perfectly in Internet Explorer,
Running firefox in safemode,
Manually disabling all plugins and addons,
Clearing the cache and cookies,
Opening results in new tab just results in white page with web address but it never loads,
Restarting both my PC and router.
It's not been working for at least the past 6 hours. Last time I used it was about a week ago and it was working fine then. I've not noticed any problems on any other sites this week that I can recall.

Updating firefox to version 17.0 appears to have solved this.

[SOLVED] KDE Won't loading

Hello everyone.
After reboot KDE won't loading anymore (after KDM login, stuck for ~30 sec at last stage and then appears only cursor).
Here the my xerrors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(1074) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.6'
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kded(1073)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kded(1073) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kwin(1106) KDecorationPlugins::canLoad: "****** The library /usr/lib/kde4/kwin3_deKorator.so has no API version ******"
kwin(1106) KDecorationPlugins::canLoad: ****** Please use the KWIN_DECORATION macro in extern "C" to get this decoration loaded in future versions of kwin
kwin(1106): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore3" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore4" - conversion of "0,0,0,0" to QRect failed"
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kdm.log
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
klauncher(2730) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2724)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2724)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Xorg.0.log
[ 800.377]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 800.377] X Protocol Version 11, Revision 0
[ 800.377] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 800.377] Current Operating System: Linux Spotlight 3.12.4-pf #1 SMP PREEMPT Wed Feb 19 23:20:59 EET 2014 x86_64
[ 800.377] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-pf root=UUID=8b2512bb-5fc1-47b9-a43d-e7b3d76bf8de rw quiet apparmor=1 security=apparmor scsi_mod.scan=sync
[ 800.377] Build Date: 09 January 2014 08:47:24AM
[ 800.377]
[ 800.377] Current version of pixman: 0.32.4
[ 800.377] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 800.377] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 800.377] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 24 18:23:57 2014
[ 800.377] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 800.377] (==) No Layout section. Using the first Screen section.
[ 800.377] (==) No screen section available. Using defaults.
[ 800.377] (**) |-->Screen "Default Screen Section" (0)
[ 800.377] (**) | |-->Monitor "<default monitor>"
[ 800.377] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 800.377] (**) | |-->Device "Nvidia Card"
[ 800.377] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 800.377] (==) Automatically adding devices
[ 800.377] (==) Automatically enabling devices
[ 800.377] (==) Automatically adding GPU devices
[ 800.377] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 800.377] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 800.377] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 800.377] (II) Loader magic: 0x804c80
[ 800.377] (II) Module ABI versions:
[ 800.377] X.Org ANSI C Emulation: 0.4
[ 800.377] X.Org Video Driver: 15.0
[ 800.377] X.Org XInput driver : 20.0
[ 800.377] X.Org Server Extension : 8.0
[ 800.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 800.378] (--) PCI:*(0:1:0:0) 10de:0615:0000:0000 rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 800.378] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 800.378] Initializing built-in extension Generic Event Extension
[ 800.378] Initializing built-in extension SHAPE
[ 800.378] Initializing built-in extension MIT-SHM
[ 800.378] Initializing built-in extension XInputExtension
[ 800.378] Initializing built-in extension XTEST
[ 800.378] Initializing built-in extension BIG-REQUESTS
[ 800.378] Initializing built-in extension SYNC
[ 800.378] Initializing built-in extension XKEYBOARD
[ 800.378] Initializing built-in extension XC-MISC
[ 800.378] Initializing built-in extension SECURITY
[ 800.378] Initializing built-in extension XINERAMA
[ 800.378] Initializing built-in extension XFIXES
[ 800.378] Initializing built-in extension RENDER
[ 800.378] Initializing built-in extension RANDR
[ 800.378] Initializing built-in extension COMPOSITE
[ 800.378] Initializing built-in extension DAMAGE
[ 800.378] Initializing built-in extension MIT-SCREEN-SAVER
[ 800.378] Initializing built-in extension DOUBLE-BUFFER
[ 800.378] Initializing built-in extension RECORD
[ 800.378] Initializing built-in extension DPMS
[ 800.378] Initializing built-in extension Present
[ 800.378] Initializing built-in extension DRI3
[ 800.378] Initializing built-in extension X-Resource
[ 800.378] Initializing built-in extension XVideo
[ 800.378] Initializing built-in extension XVideo-MotionCompensation
[ 800.378] Initializing built-in extension XFree86-VidModeExtension
[ 800.378] Initializing built-in extension XFree86-DGA
[ 800.378] Initializing built-in extension XFree86-DRI
[ 800.378] Initializing built-in extension DRI2
[ 800.378] (II) LoadModule: "glx"
[ 800.378] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 800.385] (II) Module glx: vendor="NVIDIA Corporation"
[ 800.385] compiled for 4.0.2, module version = 1.0.0
[ 800.385] Module class: X.Org Server Extension
[ 800.385] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 800.385] Loading extension GLX
[ 800.385] (II) LoadModule: "nvidia"
[ 800.385] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 800.385] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 800.385] compiled for 4.0.2, module version = 1.0.0
[ 800.385] Module class: X.Org Video Driver
[ 800.385] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 800.385] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 800.385] (++) using VT number 7
[ 800.386] (II) Loading sub module "fb"
[ 800.386] (II) LoadModule: "fb"
[ 800.387] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 800.387] (II) Module fb: vendor="X.Org Foundation"
[ 800.387] compiled for 1.15.0, module version = 1.0.0
[ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 800.387] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 800.387] (II) Loading sub module "wfb"
[ 800.387] (II) LoadModule: "wfb"
[ 800.387] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 800.387] (II) Module wfb: vendor="X.Org Foundation"
[ 800.387] compiled for 1.15.0, module version = 1.0.0
[ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 800.387] (II) Loading sub module "ramdac"
[ 800.387] (II) LoadModule: "ramdac"
[ 800.387] (II) Module "ramdac" already built-in
[ 800.387] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 800.387] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 800.387] (==) NVIDIA(0): RGB weight 888
[ 800.387] (==) NVIDIA(0): Default visual is TrueColor
[ 800.387] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 800.387] (**) NVIDIA(0): Option "NoLogo" "true"
[ 800.387] (**) NVIDIA(0): Option "TripleBuffer" "true"
[ 800.387] (**) NVIDIA(0): Enabling 2D acceleration
[ 800.821] (II) NVIDIA(0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
[ 800.821] (II) NVIDIA(0): stereo.
[ 800.821] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 800.822] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 800.822] (--) NVIDIA(0): Memory: 524288 kBytes
[ 800.822] (--) NVIDIA(0): VideoBIOS: 62.92.9a.00.00
[ 800.822] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 800.826] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 800.826] (--) NVIDIA(0): CRT-0
[ 800.826] (--) NVIDIA(0): CRT-1
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0) (boot, connected)
[ 800.826] (--) NVIDIA(0): DFP-1
[ 800.826] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): Internal Dual Link TMDS
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): 330.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 800.826] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 800.826] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 800.826] (**) NVIDIA(0): device BenQ GL940 (DFP-0) (Using EDID frequencies has been
[ 800.826] (**) NVIDIA(0): enabled on all display devices.)
[ 800.827] (==) NVIDIA(0):
[ 800.827] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 800.827] (==) NVIDIA(0): will be used as the requested mode.
[ 800.827] (==) NVIDIA(0):
[ 800.827] (II) NVIDIA(0): Validated MetaModes:
[ 800.827] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 800.827] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 800.859] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 800.859] (--) NVIDIA(0): option
[ 800.859] (--) Depth 24 pixmap format is 32 bpp
[ 800.859] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 800.861] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 800.861] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 800.861] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 800.861] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 800.861] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 800.861] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 800.861] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 800.861] (II) NVIDIA(0): Config Options in the README.
[ 800.866] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 800.893] Loading extension NV-GLX
[ 800.905] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 800.905] (==) NVIDIA(0): Backing store enabled
[ 800.905] (==) NVIDIA(0): Silken mouse enabled
[ 800.906] (==) NVIDIA(0): DPMS enabled
[ 800.906] Loading extension NV-CONTROL
[ 800.906] Loading extension XINERAMA
[ 800.906] (II) Loading sub module "dri2"
[ 800.906] (II) LoadModule: "dri2"
[ 800.906] (II) Module "dri2" already built-in
[ 800.906] (II) NVIDIA(0): [DRI2] Setup complete
[ 800.906] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 800.906] (--) RandR disabled
[ 800.909] (II) Initializing extension GLX
[ 800.933] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 800.933] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 800.933] (II) LoadModule: "evdev"
[ 800.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 800.933] (II) Module evdev: vendor="X.Org Foundation"
[ 800.933] compiled for 1.15.0, module version = 2.8.2
[ 800.933] Module class: X.Org XInput Driver
[ 800.933] ABI class: X.Org XInput driver, version 20.0
[ 800.933] (II) Using input driver 'evdev' for 'Power Button'
[ 800.933] (**) Power Button: always reports core events
[ 800.933] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 800.933] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 800.933] (--) evdev: Power Button: Found keys
[ 800.933] (II) evdev: Power Button: Configuring as keyboard
[ 800.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 800.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 800.933] (**) Option "xkb_rules" "evdev"
[ 800.933] (**) Option "xkb_model" "pc104"
[ 800.933] (**) Option "xkb_layout" "us"
[ 800.943] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 800.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 800.943] (II) Using input driver 'evdev' for 'Power Button'
[ 800.943] (**) Power Button: always reports core events
[ 800.943] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 800.943] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 800.943] (--) evdev: Power Button: Found keys
[ 800.943] (II) evdev: Power Button: Configuring as keyboard
[ 800.943] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 800.943] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 800.943] (**) Option "xkb_rules" "evdev"
[ 800.943] (**) Option "xkb_model" "pc104"
[ 800.943] (**) Option "xkb_layout" "us"
[ 800.944] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/event13)
[ 800.944] (**) SONiX USB Device: Applying InputClass "evdev pointer catchall"
[ 800.944] (II) Using input driver 'evdev' for 'SONiX USB Device'
[ 800.944] (**) SONiX USB Device: always reports core events
[ 800.944] (**) evdev: SONiX USB Device: Device: "/dev/input/event13"
[ 800.944] (--) evdev: SONiX USB Device: Vendor 0xc45 Product 0x7711
[ 800.944] (--) evdev: SONiX USB Device: Found 9 mouse buttons
[ 800.944] (--) evdev: SONiX USB Device: Found scroll wheel(s)
[ 800.944] (--) evdev: SONiX USB Device: Found relative axes
[ 800.944] (--) evdev: SONiX USB Device: Found x and y relative axes
[ 800.944] (II) evdev: SONiX USB Device: Configuring as mouse
[ 800.944] (II) evdev: SONiX USB Device: Adding scrollwheel support
[ 800.944] (**) evdev: SONiX USB Device: YAxisMapping: buttons 4 and 5
[ 800.944] (**) evdev: SONiX USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 800.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/input/input13/event13"
[ 800.944] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: MOUSE, id 8)
[ 800.944] (II) evdev: SONiX USB Device: initialized for relative axes.
[ 800.944] (**) SONiX USB Device: (accel) keeping acceleration scheme 1
[ 800.944] (**) SONiX USB Device: (accel) acceleration profile 0
[ 800.944] (**) SONiX USB Device: (accel) acceleration factor: 2.000
[ 800.944] (**) SONiX USB Device: (accel) acceleration threshold: 4
[ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/mouse0)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event7)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event6)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event5)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 800.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 800.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 800.945] (**) AT Translated Set 2 keyboard: always reports core events
[ 800.945] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 800.945] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 800.945] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 800.945] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 800.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 800.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 800.945] (**) Option "xkb_rules" "evdev"
[ 800.945] (**) Option "xkb_model" "pc104"
[ 800.945] (**) Option "xkb_layout" "us"
[ 800.945] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 805.999] (II) NVIDIA(GPU-0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
[ 805.999] (II) NVIDIA(GPU-0): stereo.
Running latest NVIDIA drivers (GTS 250).
Last edited by Swiftie (2014-02-24 17:28:19)

I discovered problem. It's caused by NetworkManager after last update (libsystemd.0.so trouble).
Recompile pkg by yourself to get working NetworkManager.
Last edited by Swiftie (2014-02-24 17:28:01)

TS1365 MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS already replaced MLB, problem still persist.. please help thanks in advance

MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance

Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

Upgraded to Yosemite, Now Safari Won't Load Youtube and Other Sites

I upgraded to Yosemite the day of. Almost immediately I found that Safari no longer would load Youtube. At all. It would just sit and spin and work and eventually say that the page wasn't available. This was also a problem with other websites. For instance, IGN would load, but it was very, very slow. Redirected webpages from Youtube that used URL shorteners would do the same thing as Youtube, it would just sit and crank away and finally give up.
When I try the same thing with Google Chrome, it loads those pages just fine. Youtube and these sites also work on my Macbook and my iPad, so I believe the problem is specific to my iMac.
So... I got really angry a few days ago and did a complete reformat of my computer. I didn't restore my old image from Time Machine, but I did a brand new install and just backed up some precious files. I re-installed Yosemite on my freshly cleaned hard drive and low and behold, Youtube worked, as did all the others!
But after about four days, the same problem is happening again. Youtube won't load, redirects from Facebook using URL shortening is a disaster again. I'm losing my mind. What could be causing this problem!?? Reformatting was the only idea I had, and I thought it was a very thorough solution. Is Safari doing this for anybody else?
My system:
iMac (27-inch, Mid 2011)
Processor 2.7 GHz Intel Core i5
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Running Yosemite Version 10.10

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My mail won't load via iCloud on my desktop. It comes up with the message "Missing resources". How do I correct this?

My mail won't load via iCloudonmy desktop. It comes up with the message "Missing resources". My network is working properly and I've checked Apple's reporting system to see if any systems are down (they are not). I am asked to submit the report to Apple (which I have)...but how do I correct this error sothat I can access my mail via iCloud on my desktop iMac?

Here is the error message information: DOES THIS HELP ANYONE FIGURE OUT WHAT IS HAPPENING? All other iCloud Services work.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers:   body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1031
initialized: true
name: cloudos-statechart
current-states: [
    active.application.displayingCurrentApp
state-transition:
    active: false
    suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 17 2015 11:35:32 GMT-0400 (EDT)        (1426606532298)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
1018646875
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers:   body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError

Hi, WWhen I turn on my mac pc, enter my account password my page wont load up , I can access the internet through my families account but not mine. There is a message telling me I need to delete files but the page won't load anything. Any help appreciated

Hi
When I turn on my pc and log into my account there is a message telling me I need to delete files. But the page won't load up anything to allow mw to do this. I am concerned I may have lost all my personal info.
I can log into other family members accounts but not mine.
Any help appreciated
Thanks

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Log-in won't load?

Similar Messages

Maybe you are looking for