Log ip address to asl.log for ssh attempts
Hello,
I am running os x server 10.4.4.
How do I log ip address to asl.log for ssh attempts? I notice alot of ssh login attempts but there is no ip/host info:
[Time 2006.02.03 08:50:39 UTC] [Facility authpriv] [Sender com.apple.SecurityServer] [PID -1] [Message Failed to authorize right system.login.tty by process /usr/sbin/sshd for authorization created by /usr/sbin/sshd.] [Level 5] [UID -2] [GID -2] [Host kane]
[Time 2006.02.03 08:50:42 UTC] [Facility authpriv] [Sender com.apple.SecurityServer] [PID -1] [Message authinternal failed to authenticate user guest.] [Level 3] [UID -2] [GID -2] [Host kane]
[Time 2006.02.03 08:50:42 UTC] [Facility authpriv] [Sender com.apple.SecurityServer] [PID -1] [Message Failed to authorize right system.login.tty by process /usr/sbin/sshd for authorization created by /usr/sbin/sshd.] [Level 5] [UID -2] [GID -2] [Host kane]
[Time 2006.02.03 08:50:45 UTC] [Facility authpriv] [Sender com.apple.SecurityServer] [PID -1] [Message authinternal failed to authenticate user public.] [Level 3] [UID -2] [GID -2] [Host kane]
Soo
First and foremost, do you intend to allow access via ssh ?
For all but those accounts that absolutely must have it, go to each account, and set: shell: to none.
If you must allow ssh access, disallow root access (as you've done).
Setup a non-obvious admin account (so, not admin or administrator, certainly not "test") that can su/sudo, and allow access for that one account only. IE, edit /etc/sshd_config (NOT with a GUI editor, use at least pico please) as follows:
change:
#PermitRootLogin yes
to:
PermitRootLogin no
then, after the line that says StrictMode,
add:
AllowUsers mysrvradmn
Where "mysrvradmn" (still too obvious, just an example), is your non-obvious admin account name that you will allow to access your server via ssh.
Then, setup key pairs for ssh login (see link below).
Last but not least, setup rules at your firewall, to restrict ssh access (port 22)
For setting up ssh keys, read here, starting with "Create authentication keys"
http://www.bombich.com/mactips/rsync.html
Similar Messages
-
Hi
I am trying to enable logging for SSH. Using sun 5.9. The SSH was preinstalled.
The logging should be able to track who logs in, time and ip address. Is it possible to also track what each user has done?
Any help would be appreciated.
Thanks
DarrenNo, auth.debug would not help.
As far as I know, theres no facility in ssh to track what happens in an ssh session.
Just the logins.
I theory you can change the users shell into something logs the session.
Possibly something scripted with the "script" command.
But it would be non trivial. -
How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
All good, I loved with AppStore and now everything seems to be back to normal.
-
One or more post-processing actions failed. Consult the OPP service log for details.
hi expert plz help me i can't understand here what can i do to resove this error.
here is the logfile details of output post processor
ebs- 11i (11.5.10.2)
os - rhel 4
[9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
[9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
[9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
[9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
[9/2/13 4:59:35 PM] [2984174:RT21672063]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language: en
Territory: 00
Output type: PDF
[090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[090213_045936408][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936409][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
[090213_045936409][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[090213_045936410][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[090213_045936419][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
[090213_045936419][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[090213_045936419][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[090213_045936419][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[090213_045936420][][EXCEPTION] [DEBUG] [path.separator]:[:]
[090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[090213_045936420][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[090213_045936420][][EXCEPTION] [DEBUG] [user.country]:[US]
[090213_045936420][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
[090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[090213_045936421][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936421][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[090213_045936422][][EXCEPTION] [DEBUG] [line.separator]:[
[090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936422][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[090213_045936422][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936422][][EXCEPTION] [DEBUG] [cpid]:[2984174]
[090213_045936422][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[090213_045936423][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[090213_045936423][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[090213_045936423][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-82.ELsmp]
[090213_045936424][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[090213_045936424][][EXCEPTION] [DEBUG] [user.home]:[/home/appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[090213_045936424][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[090213_045936424][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[090213_045936424][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
[090213_045936424][][EXCEPTION] [DEBUG] [user.name]:[appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
[090213_045936425][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[090213_045936425][][EXCEPTION] [DEBUG] [user.language]:[en]
[090213_045936425][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
[090213_045936425][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[090213_045936426][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936426][][EXCEPTION] [DEBUG] [file.separator]:[/]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[090213_045936426][][EXCEPTION] [DEBUG] [APPLOUT]:[out/ORIDEMO_demo]
[090213_045936427][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:215)
at sun.io.Converters.newConverter(Converters.java:248)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
[9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
[9/2/13 5:10:51 PM] [2984174:RT21672114]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language: en
Territory: 00
Output type: PDF
[9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:215)
at sun.io.Converters.newConverter(Converters.java:248)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
thaks
priteshhi experts
thanks for ur replay,
this issue is occured with only the particular request and this is custom report. i try some step
down the manager run the cmclean.sql, increease the processes of output postprocessor but not get the any type of effect on issue...
and also follow the step that describe in the below doc:
Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
To Bottom
request log file details below:
+---------------------------------------------------------------------------+
CONA Custom: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
+---------------------------------------------------------------------------+
Current system time is 02-SEP-2013 17:10:29
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SEGM='02'
P_CHART_OF_ACCOUNTS_ID='50268'
p_from_date='2012/04/01 00:00:00'
p_to_date='2012/04/05 00:00:00'
P_YES_NO='No'
XML_REPORTS_XENVIRONMENT is :
/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
+------------- 2) PRINT -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 02-SEP-2013 17:10:52
+---------------------------------------------------------------------------+
i check the document that u all suggest above after that i update u as soon as possible..
thanks & regards
pritesh ranjan -
We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Error in identifying control file, check alert log for more info
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30ayadsufyan wrote:
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30I'd say the error message is pretty self-evident:
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified fileWhat do you suppose "can not find the specified file" means?
And what does this have to do with database security? -
Enable logging for FTP server in 10.8
Can't figure out how to enable 10.6-style logging for FTP server in 10.8. It used to be configurable via Server Admin allowing you to choose what to log and so on and the logs would go to /Library/Logs. Now I only see some irrelevant stuff in /var/log/system.log and I want to have all the transfers logged on this server. Tried setting parameters via serveradmin ftp:setting = param but it wouldn't appear in the list afterwards no matter what (just copied those off a working 10.6 server).
As a bonus, I can't figure out where the settings for logging are stored in a 10.6 server either. There's certainly not a mention of a file named FTP.transfer.log. Weird!So to help anyone who finds themselves in the same boat and wants to enable ftpd logging on OSX 10.8 proper:
All operations assume root which is obtained by issuing 'sudo su' or just prefixing every command with 'sudo'.
First you edit the ftpd's launchd plist file:
pico /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/com.a pple.ftpserver.plist
Find the section titled 'ProgramArguments'. Amend it so it looks like this:
<key>ProgramArguments</key>
<array>
<string>ftpd</string>
<string>-ll</string>
<string>-r</string>
<string>-n</string>
<string>-d</string>
<string>-c</string>
<string>/Library/Server/FTP/Config</string>
<string>-L</string>
<string>/var/log/ftpd.log</string>
</array>
Second you edit /etc/asl.conf. This is necessary to make '-d' (debug) switch work since by default syslog won't log any debug-level messages at all.
pico /etc/asl.conf
At the end of the file add the following:
# ftpd verbose logging
? [= Facility ftp] [<= Level debug] file /var/log/ftpdv.log
Third important step is to reboot the server. ftpd's plist configuration is cached somewhere so restarting just the ftp server alone won't work.
Now what the added switches do:
-ll enables some logging (PUT and GET commands only despite what the man pages leads you to believe) to a file specified later by -L /path/to/file
-d enables debug mode which logs everything - including server's response. May be too verbose but at least you get a log of every single command issued to the server by your clients. -
No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.
I start noticing that I do not see any denied traffic coming in on my ACL. To better explain, lets say I have this config.
### Sample Config ###
object network webserver
host 192.168.1.50
nat (dmz, outside) static X.X.X.X service tcp www www
access-list inbound extended permit ip any4 object webserver eq www
If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version?
Any comments/suggestions are gladly appreciated :)
Regards,
JohnI believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done. In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched. So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either. My guess is that there is no way around this...at least no way I know of.
Please remember to select a correct answer and rate helpful posts -
can any1 pls help... i stuck in create logging for my router. i wish to log all the host connected to my router throught SSH. My router only allow ssh or console.
hi
few posts already been here in netpro about ssh ,the H/W platform may vary depending on case to case....
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd91fb2/0
http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=jswaxxoax1.SJ3B?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd91d30
would suggest to give a search over here too which will also yield a lot for u..
regds -
ORA-00205: error in identifying control file, check alert log for more
I am trying to upgrade database software from 11.2.0.1 to 11.2.0.2 and followed the steps given in the Doc ID 1276368.1 in linux 86 OS environment . I am in step 9 where i need to start up the database in startup upgrade mode. I get the the following error. Please help. This out of box upgrade is quite tricky and my database is stigged version. Not able to trouble shoot further, Please help me to go forward.
sqlplus " / as sysdba "
SQL> spool /tmp/upgrade.log
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1607008256 bytes
Fixed Size 1344476 bytes
Variable Size 973081636 bytes
Database Buffers 620756992 bytes
Redo Buffers 11825152 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i shutdown and restart again? I need to run @catupgrd.sql; and other.sql to upgrade it and then apply CPU patch.
Please help...regardsFatal NI connect error 12637, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 21-NOV-2011 04:49:04
Tracing not turned on.
Tns error struct:
ns main err code: 12637
TNS-12637: Packet receive failed
ns secondary err code: 12532
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (3912) as a result of ORA-609
Mon Nov 21 04:59:02 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 04:59:04 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 26
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 04:59:09 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 04:59:09 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 04:59:09 2011
ARCH shutting down
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC3: Archival stopped
ARC1: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC2: Archival stopped
Thread 1 closed at log sequence 1458
Successful close of redo thread 1
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
MMON started with pid=15, OS id=4342
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon C:\Users\MVEMURI 07:48:48 2011
MMNL started with pid=16, OS id=4347
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 07:48:49 2011
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 2616737889
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Mon Nov 21 07:48:54 2011
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Mon Nov 21 07:48:54 2011
ARC0 started with pid=20, OS id=4398
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Mon Nov 21 07:48:55 2011
ARC1 started with pid=21, OS id=4403
Mon Nov 21 07:48:55 2011
ARC2 started with pid=22, OS id=4408
ARC1: Archival started
ARC2: Archival started
ARC2: Becoming the 'no FAL' ARCH
ARC2: Becoming the 'no SRL' ARCH
Mon Nov 21 07:48:55 2011
ARC3 started with pid=23, OS id=4413
ARC1: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 1458
Current log# 3 seq# 1458 mem# 0: /u01/app/oracle/oradata/rtborcl/redo03.log
Current log# 3 seq# 1458 mem# 1: /u02/app/oracle/oradata/redo03b.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:977954 end:979234 diff:1280
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Mon Nov 21 07:48:58 2011
SMON: enabling tx recovery
Database Characterset is WE8MSWIN1252
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Nov 21 07:49:03 2011
QMNC started with pid=24, OS id=4418
Mon Nov 21 07:49:10 2011
db_recovery_file_dest_size of 4977 MB is 13.68% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Nov 21 07:49:12 2011
Completed: ALTER DATABASE OPEN
Mon Nov 21 07:49:12 2011
Starting background process CJQ0
Mon Nov 21 07:49:12 2011
CJQ0 started with pid=25, OS id=4470
Mon Nov 21 07:54:05 2011
Starting background process SMCO
Mon Nov 21 07:54:05 2011
SMCO started with pid=26, OS id=4515
Mon Nov 21 10:08:01 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:08:01 2011
Thread 1 advanced to log sequence 1459 (LGWR switch)
Current log# 1 seq# 1459 mem# 0: /u01/app/oracle/oradata/rtborcl/redo01.log
Current log# 1 seq# 1459 mem# 1: /u02/app/oracle/oradata/redo01b.log
Mon Nov 21 10:08:04 2011
Archived Log entry 1421 added for thread 1 sequence 1458 ID 0x990b1f4c dest 1:
Mon Nov 21 10:12:53 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:12:53 2011
Thread 1 advanced to log sequence 1460 (LGWR switch)
Current log# 2 seq# 1460 mem# 0: /u01/app/oracle/oradata/rtborcl/redo02.log
Current log# 2 seq# 1460 mem# 1: /u02/app/oracle/oradata/redo02b.log
Mon Nov 21 10:12:53 2011
Archived Log entry 1422 added for thread 1 sequence 1459 ID 0x990b1f4c dest 1:
Mon Nov 21 10:14:44 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 10:14:45 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 4
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 10:14:49 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 10:14:54 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC3: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC2: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC1: Archival stopped
Thread 1 closed at log sequence 1460
Successful close of redo thread 1
Mon Nov 21 10:15:01 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 10:15:02 2011
Stopping background process VKTM:
Mon Nov 21 10:15:08 2011
Instance shutdown complete
Mon Nov 21 11:52:11 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/db_2/dbs/initrtborcl.ora
System parameters with non-default values:
processes = 150
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Create Relation DFW_CONFIG_CAPTURE
Create Relation DFW_CONFIG_ITEM
Mon Nov 21 11:52:17 2011
PMON started with pid=2, OS id=7339
Mon Nov 21 11:52:17 2011
PSP0 started with pid=3, OS id=7344
Mon Nov 21 11:52:18 2011
VKTM started with pid=4, OS id=7349
VKTM running at (100ms) precision
Mon Nov 21 11:52:18 2011
GEN0 started with pid=5, OS id=7356
Mon Nov 21 11:52:19 2011
DIAG started with pid=6, OS id=7361
Mon Nov 21 11:52:19 2011
DBRM started with pid=7, OS id=7366
Mon Nov 21 11:52:19 2011
DIA0 started with pid=8, OS id=7371
Mon Nov 21 11:52:19 2011
MMAN started with pid=9, OS id=7376
Mon Nov 21 11:52:19 2011
DBW0 started with pid=10, OS id=7381
Mon Nov 21 11:52:19 2011
LGWR started with pid=11, OS id=7386
Mon Nov 21 11:52:19 2011
CKPT started with pid=12, OS id=7391
Mon Nov 21 11:52:19 2011
SMON started with pid=13, OS id=7396
Mon Nov 21 11:52:19 2011
RECO started with pid=14, OS id=7401
Mon Nov 21 11:52:19 2011
MMON started with pid=15, OS id=7406
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Nov 21 11:52:19 2011
MMNL started with pid=16, OS id=7411
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 11:52:20 2011
ALTER DATABASE MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Nov 21 11:52:21 2011
Checker run found 1 new persistent data failures -
The transaction log for database 'BizTalkMsgBoxDb' is full.
Hi All,
We are getting the following error continously in the event viewer of our UAT servers. I checked the jobs and all the backup jobs were failing on the step to backup the transaction log file and were giving the same error. Our DBA's cleaned the message box manually and backed up the DB but still after some time the jobs starts failing and this error is logged in the event viewer.
The transaction log for database 'BizTalkMsgBoxDb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases".
Thanks,
Abdul Rafay
http://abdulrafaysbiztalk.wordpress.com/
Please mark this answer if it helpsPutting the database into simple recovery mode and shrinking the log file isn't going to help: it'll just grow again, it will probably fragment across the disk thereby impacting performance and, eventually, it will fill up again for the same reason
as before. Plus you put yourself in a very vulnerable position for disaster recovery if you change the recovery mode of the database: and that's before we've addressed the distributed transaction aspect of the BizTalkDatabases.
First, make sure you're backing up the log file using the BizTalk job Backup BizTalk Server (BizTalkMgmtDb). It might be that the log hasn't been backed up and is full of transactions: and, eventually, it will run out of space. Configuration
instructions at this link:
http://msdn.microsoft.com/en-us/library/aa546765(v=bts.70).aspx Your DBA needs to get the backup job running properly rather than panicking!
If this is running properly, and backing up (which was the case for me) and the log file is still full, run the following query:
SELECT Name, log_reuse_wait_desc
FROM sys.databases
This will tell you why the log file isn't properly clearing down and why it cannot use the space inside. When I had this issue, it was due to an active transaction.
I checked for open transactions on the server using this query:
SELECT
s_tst.[session_id],
s_es
.[login_name]
AS [Login Name],
DB_NAME
(s_tdt.database_id)
AS [Database],
s_tdt
.[database_transaction_begin_time]
AS [Begin Time],
s_tdt
.[database_transaction_log_record_count]
AS [Log Records],
s_tdt
.[database_transaction_log_bytes_used]
AS [Log Bytes],
s_tdt
.[database_transaction_log_bytes_reserved]
AS [Log Rsvd],
s_est
.[text]
AS [Last T-SQL Text],
s_eqp
.[query_plan]
AS [Last Plan]
FROM
sys.dm_tran_database_transactions
s_tdt
JOIN
sys.dm_tran_session_transactions
s_tst
ON s_tst.[transaction_id]
= s_tdt.[transaction_id]
JOIN
sys.[dm_exec_sessions]
s_es
ON s_es.[session_id]
= s_tst.[session_id]
JOIN
sys.dm_exec_connections
s_ec
ON s_ec.[session_id]
= s_tst.[session_id]
LEFT
OUTER
JOIN
sys.dm_exec_requests
s_er
ON s_er.[session_id]
= s_tst.[session_id]
CROSS
APPLY
sys.dm_exec_sql_text
(s_ec.[most_recent_sql_handle])
AS s_est
OUTER
APPLY
sys.dm_exec_query_plan
(s_er.[plan_handle])
AS s_eqp
ORDER
BY [Begin Time]
ASC;
GO
And this told me the spid of the process with an open transaction on BizTalkMsgBoxDB (in my case, this was something that had been open for several days). I killed the transaction using KILL spid, where spid is an integer. Then I ran the BizTalk
Database Backup job again, and the log file backed up and cleared properly.
Incidentally, just putting the database into simple transaction mode would have emptied the log file: giving it lots of space to fill up again. But it doesn't deal with the root cause: why the backups were failing in the first place. -
WSA access logging for HTTPS traffic
Hi,
We have a WSA s370 with AsyncOS version 7.5.1-079 and it is configured as a transparent proxy.
HTTPS proxy is enabled and all the URL categories set to pass through ( no decrytpting or monitoring ).
Seems like the WSA does not generate logs for HTTPS transactions.
I would like to know whether this is the expected behaviour.
Is there any way that I can monitor HTTPS transactions without decrypting ?
Thanks,
Wipula.In addition to what Ken mentioned, the only way you can monitor HTTPS traffic without decrypting it will be done so using the IP address.
In the access logs, you will see the following transaction when accessing an HTTPS site (google for example):
TCP_CONNECT 74.125.101.50
It will only report URLs once decrypted. At that point, it is just HTTP.
-Vance -
NAT logging for CRS-1's CGSE using NetFlow v9
Does anyone know a software that supports NAT logging for CRS-1's CGSE using NetFlow v9?
I'm focusing at least specific fields as follow.
field id=8 (ipv4 source address), offset=0, len=4
field id=225 (natInsideGlobalAddress), offset=4, len=4
field id=12 (ipv4 destination address), offset=8, len=4
field id=226 (natOutsideGlobalAddress), offset=12, len=4
field id=7 (transport source-port), offset=16, len=2
field id=227 (postNAPTSourceTransportPort), offset=18, len=2
field id=11 (transport destination-port), offset=20, len=2
field id=228 (postNAPTDestinationTransportPort), offset=22, len=2
Thanks,
Bancha S.I mean Traffic Analysis / Forensics Softwares.
-
Hi Friends,
Please help me in finding the change logs for the TCODE FILE,
i.e The changes made to the Logical paths
I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar jrec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders
Maybe you are looking for
-
Since upgrading to iTunes 6.0.1 I have not been able to play any tracks or CD tracks - the track name and other information appears at the top but the diamond will not move - you can advance the diamond but still the track will not play. Any clues? I
-
ITunes library in shared folder
When I installed Vista on this computer I partitioned the hard drive as C (O/S), D (DVD), E (Music) & F (Photos). All music was installed straight to the E drive and was using Windows Media Player and all users could access the music. We now have an
-
Help - anyone else out there having trouble with the new OS system on their ipad 2? I am not getting mutliple copies of several apps ont he main page. They are "collecting: in a pike int he upper left corner and the original application icon is n
-
RSR_OLAP_BADI not able to get it working
Hi all I have been trying to impliment the above badi but it does not seem to execute any of the code. Please advise if the following will work, I need to define a virtual characteristic to be populated with 'Full' / 'Partial' based on comparing two
-
I have installed my personal Yahoo Mail on my 9810 Torch; as a result, the Contacts list now includes a mix of work and personal when first pulled up. I can then change it to display only one of my contacts lists (work or personal), but that require