Log is filled with AFP_VFS afpfs_vnop_getxattr: bad dataLength offset 2 replySize 2

Hi all,
I'm connecting to a LaCie big NAS, wired, via AFP. Lately networktransfer is veeeeery slow and I see my log is filled with:
AFP_VFS afpfs_vnop_getxattr: bad dataLength offset 2 replySize 2 (as soon as i browse the NAS disk or start a transfer a series of these error messages are added).
I've seen some reports of this error, apparently it has something to do with OS X Maverick and netatalk version. But I can't find a solution...
I tried to switch to SMB but that throwes lot of error -36 (unexpected end of file) when saving files (for example AI) directly to the disk.
Any suggestions? Would be much appreciated .
Viktor

Resetting the NetworkSpace 2 back to it's shipping configuration and freshly updating to 2.2.8.5 didn't help, so don't bother going to the (considerable) trouble if Lacie tech support suggests it will fix the problem.
Their current advice is to abandon AFP and connect to the NS2 as an SMB volume or via FTP. Not very useful if you purchased the device intending to use it (as advertised) for Time Machine backups.

Similar Messages

System Log file filled with arp message from teamed nics

Hello,
We are running a Win2k3 server with dual nics teamed to one IP address. All of our Mac's system logs are being filled with the following message:
Mar 28 12:48:58 Son-of-Spacedog kernel[0]: arp: 192.168.200.50 moved from 00:04:23:b9:00:4a to 00:04:23:b9:00:4b on en0
This is repeated over and over. Is there any way to get the Mac's to stop generating this message? Is the fix for this on the server side or on the Mac side? From what I have seen online in other forums, this started happening with Panther.

There are actually several different types of NIC Teaming Modes:
Adapter Fault Tolerance (AFT) - provides automatic redundancy for a server's network connection. If the primary adapter fails, the secondary adapter takes over. Adapter Fault Tolerance supports two to eight adapters per team. This teaming mode works with any hub or switch, and all team members must be connected to the same device.
Switch Fault Tolerance (SFT) - provides a failover relationship between two adapters when each adapter is connected to a separate switch. Switch Fault Tolerance supports two adapters per team. This feature works with any switch. Spanning Tree Protocol (STP) must be enabled when you create a team in SFT mode.
Adaptive Load Balancing (ALB) - provides load balancing for transmission traffic and adapter fault tolerance. You can also enable or disable receive load balancing (RLB) in ALB teams. This teaming mode works with any switch.
Fast EtherChannel/Link Aggregation - provides increased transmission and reception throughput in a team of two to eight adapters. This mode also includes adapter fault tolerance and load balancing (only routed protocols). This requires a switch with Link Aggregation or FEC capability.
Gigabit EtherChannel/Link Aggregation - is the gigabit extension of the FEC/Link Aggregation/802.3ad: static mode. All team members must operate at gigabit speed.
IEEE 802.3ad: dynamic mode - creates one or more teams using dynamic Link Aggregation with same-speed or mixed-speed adapters. Like the static Link Aggregation modes, Dynamic 802.3ad teams increase transmission and reception throughput and provide fault tolerance. This mode requires a switch that fully supports the IEEE 802.3ad standard.
Now, most likely, somewhere on the network a server is configured for ALB or AFT, and these are the most common methods of NIC teaming (Sadly, the XServes do not). They also do not require any certain type of switch, but they do require STP (Spanning Tree Protocol) to be turned off to function most effectively, or you will see errors on the network like the ones you are seeing in your log. Most managed switches come with STP turned on by default, so you will need to check ALL switches (as the errors will cascade throughout the network) to see if it STP is turned on. Most people do not use STP any more (it basically allows ports on one switch to appear as on another switch), so see if you can turn it off. That should stop the error messages.
-MacBoy in SLC
PowerMac G5 Dual 2.0 GHz Mac OS X (10.4.6)

[SOLVED] dvd drive not working, log file filled with error.

hi,
i dont know if this is something to do with the latest kernel update or something else that may have occured.
but my dvd writer has stopped working. no light on the front, pressing the button does not open the tray.
it wtill works fine when i boot into windows (dual boot with XP) so it's not a hardware issue.
also my everything.log file is filling up with the following every two seconds!
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
Mar 1 19:27:56 adax hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
Mar 1 19:27:56 adax hda: status error: error=0x00 { }
Mar 1 19:27:56 adax ide: failed opcode was: unknown
Mar 1 19:27:56 adax hda: drive not ready for command
can someone please help me before i run out of disk space for my logs!
thanks,
ad.
Last edited by adax (2008-03-01 23:25:37)

Hello,
I strongly suspect that you need to change 'ide' to 'pata' in your /etc/mkinitcpio.conf
#HOOKS="base udev autodetect ide scsi sata usb keymap filesystems"
HOOKS="base udev autodetect pata scsi sata usb keymap filesystems"
Then recreate with:
mkinitcpio -g /boot/kernel26.img
Last edited by colnago (2008-03-01 21:21:37)

Huge system.log file filled with over a million messages about NSATSTypeset

Hi,
I just happened to notice the system.log file on my MacBook Pro laptop was absolutely huge - over 1.2 GBytes in just one day. Almost all of it is messages like this:
Mar 31 12:26:23 macbook quicklookd[228]: <NSATSTypesetter: 0x146b40>: Exception * table 0x1473caa0 has block 0x147b3040 rather than 0x147b4850 at index 7573 raised during typesetting layout manager <NSLayoutManager: 0x124140>\n 1 containers, text backing has 16461 characters\n selected character range {16461, 0} affinity: downstream granularity: character\n marked character range {16461, 0}\n Currentl
y holding 16461 glyphs.\n Glyph tree contents: 16461 characters, 16461 glyphs, 4 nodes, 128 node bytes, 16384 storage bytes, 16512 total bytes, 1.00 bytes per character, 1.00 bytes per glyph\n Layout tree contents: 16461 characters, 16461 glyphs, 7573 laid glyphs, 207 laid line fragments, 3 nodes, 96 node bytes, 13656 storage bytes, 13752 total bytes, 0.84 bytes per character, 0.84 bytes per glyph, 36.58 laid glyphs per laid line fragment, 66.43 bytes per laid line fragment\n, glyph range {7573 0}. Ignoring...
and there are over 1.3 million of these messages!!!! There is a tiny bit of variation in some of the numbers (but not all). That is just a little bit more than the total number of files I have on the hard drive in the laptop, so it would appear that the quicklookd is doing something to each and every file on the computer. Any idea why all of a sudden these messages appear and why so many. I only have about 7 versions of the system.log files and none of them are even close to this big, but the one one thing I did do today that I have not in a few weeks is reboot my laptop because of another problem with the laptop screen not waking this morning from being put to sleep last night (was just black but computer was running and could login to it from another computer in the LAN it is attached).
Any ideas why this is happening, or is this something that always happens on a reboot/boot rather than waking from sleep. Why would the quicklookd be printing out so many of these messages that are almost exactly alike???
I have only had this MacBook for a few weeks, so don't have a good feel for what is normal and what isn't yet.
THanks...
-Bob

Bob,
Thanks for your further thoughts and the additional information. My guess is that Quick Look does its file processing independently of whether or not or how recently the computer has been rebooted. The NSATSTypesetter messages filling up the log file are almost certainly error messages and should not occur with normal operation of Quick Look. I suspect that your reboot doesn't directly have anything to do with this problem. (It might have indirectly contributed in the sense that either whatever caused the need for the reboot or the reboot process itself corrupted a file, which in turn caused Quick Look to fail and generate all those error messages in the log file.)
In the meantime I may have a solution for this problem. This morning I rebooted in single user mode and ran AppleJack in manual mode so that I could tell it to clean up all user cache files. (I'd previously downloaded AppleJack application from http://applejack.sourceforge.net/ . To boot in single user mode hold command and s keys at startup chime. ... Run the five AppleJack maintenance tasks in order. The third task will give you the option to enter numbers of users whose cache files will be cleaned. Do this cache cleaning for all users.) In the six hours since I ran AppleJack I've seen exactly two NSATSTypesetter error messages in /var/log/system.log . This compares with hundreds of thousands in the same period yesterday. I just set an iCal alarm to remind me to report back to this discussion thread in two weeks on this issue.
Best,
Chris.
PS: Above you mention 7 log files. Are the older ones of the form system.log.0.bz2 ? If so they have been compressed. Just because they are small doesn't necessarily mean there are not a lot of nearly identical error messages. Uncompress to check. I haven't tried this because large files are very inconvenient to work with on my old iBook.

Mac OS: System log being filled with various "CGContext..." errors

I've been troubleshooting an occasional FF26 hang (whereby the entire browser goes unresponsive for 10-15 seconds) and took a look at the system log.
I'm running Mac OS Mavericks 10.9.1. The log is absolutely **inundated** with messages like this:
<pre><nowiki>Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextConcatCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextClipToRect: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextConcatCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextTranslateCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextScaleCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextSetInterpolationQuality: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:07 mikebookpro.local firefox[12150]: CGContextDrawImage: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextTranslateCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextScaleCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextSetShouldAntialias: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextConcatCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextClipToRect: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextConcatCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextTranslateCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextScaleCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextSetInterpolationQuality: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
Jan 24 10:19:08 mikebookpro.local firefox[12150]: CGContextDrawImage: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
</nowiki></pre>
This message seems to be associated with scrolling - i.e. it only happens when I scroll the view. Every time I scroll, a good page or two of these messages are generated.
Is this relevant, and how can it be fixed? My syslog is growing abnormally large due to this.

I'm having the same onslaught of errors, with the 10 second hangs, also on 10.9.1. I did not have hardware acceleration enabled, and safe mode made no difference. Any ideas?

Nfragentd.log gets filled with error messages during FS scan

Hi,
We are seeing A LOT of error messages like this one in the nfragentd.log files (one scan can generate 4 full log files!):
less /var/opt/novell/filereporter/agent/log/nfragentd.log
01 2014-11-06 00:59:57 -18000 3 0006 43591 7f0f49bce700 SRSScanAndCollectFileSystemDataService::GetScanDat aEntryMetaDataAndSecurityInfo() - Called AddSecurityPrincipalToInventory(L"SERVER", 32848, false), Scan ID = "982", Result = 15. {Cr
eator}
Is it something to worry about, or is it something benign like the owner of the file has been deleted from eDir? If it is benign, how can this be suppressed?
Also this seems to delay the scan, so resolving this would improve scan performance.

On 11/6/2014 9:46 AM, ablovatskia wrote:
>
> Hi,
>
> We are seeing A LOT of error messages like this one in the
> nfragentd.log files (one scan can generate 4 full log files!):
>
> less /var/opt/novell/filereporter/agent/log/nfragentd.log
>
> 01 2014-11-06 00:59:57 -18000 3 0006 43591 7f0f49bce700
> SRSScanAndCollectFileSystemDataService::GetScanDat aEntryMetaDataAndSecurityInfo()
> - Called AddSecurityPrincipalToInventory(L"SERVER", 32848, false), Scan
> ID = "982", Result = 15. {Cr
> eator}
>
> Is it something to worry about, or is it something benign like the owner
> of the file has been deleted from eDir? If it is benign, how can this be
> suppressed?
>
> Also this seems to delay the scan, so resolving this would improve scan
> performance.
>
>
ablovatskia,
What sort of volume are you scanning, in this case?
-- NFMS Support Team

System.log filling with error messages

After SL update my system.log if filling with error messages.
Does any process delete the system.log periodically?
What's causing this error? Getting thousands of them.
9/30/09 12:08:13 PM [0x0-0x12012].com.nowsoftware.nowxagent[181] at now.swing.NProgressBar.fixAppleAnimationBug(null:-1)

JHF45 wrote:
After SL update my system.log if filling with error messages.
Does any process delete the system.log periodically?
Yes. There are three automatic jobs that run daily, weekly, and monthly doing this sort of thing. They run in the early hours of the morning if your Mac is awake, or shortly after it wakes up if it was sleeping. In Leopard, if it was powered-off, they won't run; I don't know if it's the same in Snow.

[SOLVED]pacman.log filled with "[PACMAN] starting full system upgrade"

Today i just ran pacman -Suy, but now the log is filled with:
Gozer ~ # tail /var/log/pacman.log -n 100
[2013-04-08 12:26] [PACMAN] upgraded youtube-dl (2013.02.25-1 -> 2013.04.03-1)
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:28] [PACMAN] starting full system upgrade
[2013-04-08 12:28] [PACMAN] starting full system upgrade
[2013-04-08 13:06] [PACMAN] starting full system upgrade
Gozer ~ # grep '2013-04-08' /var/log/pacman.log |grep "starting full system upgrade" | wc -l
637
Is this a bug?
Last edited by kokoko3k (2013-04-08 12:57:01)

Edit: are you using some system update monitoring script?
Ops... big "OPS".
You are right, sorry!

Logs *FILLED* with "too many HTTP redirects".

as far as i can tell... this isn't causing an actual issue with any pages.
but my Console log is literally filled with :
*7/29/08 4:03:59 PM servermgrd[40] servermgr_web: Request for status failed: Error Domain=NSURLErrorDomain Code=-1007 UserInfo=0xae42540 "too many HTTP redirects". Admin Web graphs may be inaccurate.*
literally non-stop all day long. doesn't seem to be related to server load / traffic at all really. timing works out to roughly every 1 minute (very slight drift)... i get 2 or 3 entries. sometimes with maybe a 10 second gap in the "groups".
example of the "groups" :
7/29/08 4:19:49 PM
7/29/08 4:19:58 PM
7/29/08 4:19:58 PM
7/29/08 4:20:49 PM
7/29/08 4:20:58 PM
7/29/08 4:20:58 PM
7/29/08 4:21:49 PM
7/29/08 4:21:59 PM
7/29/08 4:21:59 PM
7/29/08 4:22:49 PM
7/29/08 4:23:00 PM
7/29/08 4:23:00 PM
it is getting very annoying obviously.
seeing the word "redirect" i did the obvious thing and disabled every single redirect i had on the entire site... including all subdomains. no change.
checked the master httpd.conf and the "sites" .conf files as well for anything else odd or redirect-ish looking. nothing.
since the timing is so regular... i can't really think what it might be.
one symptom i DO KNOW OF... is that the Server Admin app will not display the logs while the server is actively running. turn the server OFF ... shows the logs in the Log tab... turn server ON... that tab goes empty.
most likely related.
the logs are being written though. since i tail them just fine and see real-time activity.
i turned OFF all logging... error still shows up.
so as far as i can tell... not related to actual "Redirects"... not related to my disappearing log tab symptom...
any ideas?
IIRC this did NOT happen until migrating to Apache 2.
thanks.
zeb./

cat /etc/resolv.conf
{quote}
nameserver 209.165.164.3{quote}
sudo changeip -checkhostname
{quote}
Primary address = 209.165.164.4
Current HostName = www.arcus.org
The DNS hostname is not available, please repair DNS and re-run this tool.
{quote}
and i get...
{quote}
host www.arcus.org
www.arcus.org has address 209.165.164.4
{quote}
and subdomains show up right as well...
{quote}
host nps.arcus.org
nps.arcus.org is an alias for www.arcus.org.
www.arcus.org has address 209.165.164.4
{quote}
i guess i do get make double PTR records back from Network Utility... have www.arcus.org as an A and arcus.org as an A. should the latter maybe be a CNAME like the other (sub-)domains?
{quote}
4.164.165.209.in-addr.arpa. 86400 IN PTR www.arcus.org.
4.164.165.209.in-addr.arpa. 86400 IN PTR arcus.org.
164.165.209.in-addr.arpa. 86400 IN NS ns1.arcus.org.
ns1.arcus.org. 7200 IN A 209.165.164.3
{quote}
could that be the problem?
another server is set-up pretty much identical to this one (other than the content and it has a CMS) with the same DNS set-up more or less. (no subdomains. but the double A like this one) and it doesn't have the same error. at all.
though... it also has functioning web graphs and logs in it's Server Admin.
thanks.

Change log of customer filled with garbage with inbound ADRMAS IDOC

Hi gurus,
when i process inbound IDOC ADRMAS for updating customer addres then Change log of customer filled with garbage.
the idoc is having FAX segment PAGER segment etc etc and if no data change even then there are many entries in change log with Delete..
Please help..
regards

Hello,
If it is a Custom Posting Program, please verify that your code is clearing the Log before it takes in any new content.
Also, check the Data and try posting it again.
Thanks and Regards,
Venkat Phani Prasad Konduri

I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

If you didn’t erase the drive and install using you AppleID, then the OS and the purchased apps are still registered to the other AppleID. You cannot change that by logging into iCloud. Apps are forever tied to the AppleID used to purchase/download them.
You have to erase the drive and download/install the Apps using your AppleID.

How to change the reason in a ICWC-followup-process with the copying-BAdI?

Hi all,
I want to use the followup- and docflow-functionality in ICWC to copy most of the information from one process to another.
I made the definition of a copying control in the customizing -> working with a new BAdI and the copying routine. Everything works fine so far: I can get/change the description in the BAdIs ORDERADM_H method or the ibase information REFOBJ method for examples.
The question is now how to get/change the reason of the process?
Working with the genil_model_browser the reason is located in BTOrderHeader->BTHeaderBOSSet->BTSubjectSet_F->BTSubject_A1. Where can I find the reason in the BAdI methods?
Thanks for your help.
Regards,
Benjamin

Hi
Put a break point in crm_order_maintain to see what structures and fields you need to fill out. Then change the reason code in crm online, you will have all the data you need.
Here is some code I used in the he badi order_save, method prepare.
data:
    IV_REF_HANDLE     TYPE     CRMT_HANDLE,
    IV_REF_GUID     TYPE     CRMT_OBJECT_GUID,
    IV_REF_KIND     TYPE     CRMT_OBJECT_KIND,
    IS_SRV_OSSET_COM     TYPE     CRMT_SRV_OSSET_COM2,
    IT_SRV_REFOBJ_COM     TYPE     CRMT_SRV_REFOBJ_COMT,
    IT_SRV_SUBJECT_COM     TYPE     CRMT_SRV_SUBJECT_COMT,
    is_srv_subject_com type CRMT_SRV_SUBJECT_COM,
    ET_SRV_OSSET_COMT     TYPE     CRMT_SRV_OSSET_COMT,
    LT_SRV_OSSET_COMT     TYPE     CRMT_SRV_OSSET_COMT,
    ET_INPUT_FIELDS     TYPE      CRMT_INPUT_FIELD_TAB,
    ET_EXCEPTION TYPE CRMT_EXCEPTION_T,
    tab_osset type CRMT_SRV_OSSET_COMT1,
    wa_osset like line of tab_osset,
    wa_srv like line of ET_SRV_OSSET_COMT,
    new_srv type CRMT_SRV_OSSET_COMT,
    call_list_name type char50,
    query_text(80).
refresh: ET_INPUT_FIELDS,
                   IT_SRV_SUBJECT_COM.
          clear: is_srv_subject_com,
                 IS_SRV_OSSET_COM.
          IV_REF_KIND = 'A'.
          iv_ref_guid = iv_guid.
          IS_SRV_OSSET_COM-SUBJECT_PROFILE = 'Z00000002'.
          IS_SRV_OSSET_COM-PROFILE_TYPE = 'F'.
          is_srv_subject_com-ref_handle = '0000000002'.
          is_srv_subject_com-KATALOGART = 'A1'.
          is_srv_subject_com-CODEGRUPPE = 'Z0000002'.
          is_srv_subject_com-CODE = 'ZAA'.
          is_srv_subject_com-DEFQUANTITY = 0.
          is_srv_subject_com-MODE = 'A'.
          append is_srv_subject_com to IT_SRV_SUBJECT_COM.
          CALL FUNCTION 'CRM_SERVICE_OS_SET_DATA'
            EXPORTING
              IV_REF_GUID        = iv_ref_guid
              IV_REF_KIND        = 'A'
              IS_SRV_OSSET_COM   = IS_SRV_OSSET_COM
              IT_SRV_SUBJECT_COM = IT_SRV_SUBJECT_COM
            IMPORTING
              ET_SRV_OSSET_COMT = et_srv_osset_comt
            EXCEPTIONS
              ERROR_OCCURRED     = 1
              INVALID_GUID       = 2
              NO_RECORD_EXIST    = 3
              OTHERS             = 4.
          IF SY-SUBRC <> 0.
          ENDIF.
          CALL FUNCTION 'CRM_SERVICE_OS_PUT_DATA'
            IMPORTING
              ET_SRV_OSSET_COM = et_srv_osset_comt
              ET_INPUT_FIELDS = ET_INPUT_FIELDS.
          read table LT_SRV_OSSET_COMT index 1 into wa_srv.
          if sy-subrc = 0.
            tab_osset[] = wa_SRV-osset[].
          endif.
          loop at ET_SRV_OSSET_COMT into wa_srv.
            append lines of tab_osset to wa_srv-osset.
          endloop.
          append wa_srv to new_srv.
        else.
          new_srv[] = LT_SRV_OSSET_COMT[].
        endif.
        CALL FUNCTION 'CRM_ORDER_MAINTAIN'
          EXPORTING
            IT_SERVICE_OS     = new_srv
          IMPORTING
            ET_EXCEPTION      = et_exception
          CHANGING
            CT_INPUT_FIELDS   = ET_INPUT_FIELDS
          EXCEPTIONS
            ERROR_OCCURRED    = 1
            DOCUMENT_LOCKED   = 2
            NO_CHANGE_ALLOWED = 3
            NO_AUTHORITY      = 4
            OTHERS            = 5.

Logs are filling up disk space

Dear all
i am facing a problem in my database
the database is in archive log mode and continuous archiving of log is filling up the disk space
please let me know what should i do so that at the end of activity there should be no complaints of logs filling up
i wil ensure the big disk space
please let me know what kind of administration i have to do with this issue ...

hello Sagar
when you use RMAN for backup you can set RETENTION POLICY for window of day or redundancy for example
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS;
or
RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
and when you backup use "BACKUP ... PLUS ARCHIVELOG" for example
BACKUP DEVICE TYPE sbt
DATABASE PLUS ARCHIVELOG;
it cause that RMAN when backup your database , backup your archived logs too ;
and about that two first CONFIGURE command
first command cause backupfiles and archived log files that backuped up before than 3 days signed obsolete in V$BACKUP_FILES view
(you can query the V$BACKUP_FILES view and check the OBSOLETE column)
second command cause backupfiles and archived log files that backuped up 3 times signed obsolete in V$BACKUP_FILES view
and if you use "DELETE OBSOLETE ..." command in RMAN it delete obsolete files
and your archived logs that backued up and are obsolete will be delete
AND you can use DBMS_SCHEDULER for synchronize this routine
Message was edited by: khosravi
khosravi

Time Machine backup fills with multiple copies of files

I bought a 500 GB external drive, which I backed up iPhoto (34 GB), iTunes (61 GB) and some other large files using Time Machine. Using 'Disk Inventory X', I can see that the Time Machine backup drive is filled with 12 separate copies of my entire iPhoto library, iTunes libraries, Windows XP and other large files. Is there any setting I can set to technique to use to make it more efficient? My 500 GB gives only three days of backup!

Same answer as to your other post:
Doubtful. Something else is going on.
Most likely, that's not what you're seeing.
What appear to be duplicate files and folders are actually "multi-links" (sort of like fancy aliases) that look like multiple copies of the same things.
To find out what's really going on, download the Time Machine Buddy widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window. The somewhat-cryptic messages will show roughly how much was copied on each backup.
Also download the TimeTracker app, from www.charlessoft.com.
It shows most of the files actually saved by TM for each backup (excluding some hidden/system files, etc.).
If you find the same files being saved again, even though they weren't changed, post back, and include the results from the widget for that particular backup. Then we can figure out what's really going on.

Authorization variable not filled with authorization values

Hello All
I post a similar message earlier this week, I thought that my issue was solved, but it was not.
I've got a workbook with 4 differents queries.
There as an authorizations variable in each query. This variable properties is as follows :
**General tab**
Type of variable : characteristic value
Processing type : authorization
Characteristic : company code
**Details**
Variable represents : selection options
Variable is : optional
Variable is ready for input : yes
I've followed recommandations from OSS notes 976680
My issue is : if I run each query individually, variable is filled with authorized values
If I run the workbook, variable is not filled with authorized value, so when end user run the workbook, BW consider that end user wants to see all data and get "No authorization".
I don't understand why variable within the workbook doesn't show the authorized values and why the queries do.
Any suggestion about this issue ????
Thanks
Catherine

Hi
thanks for replying
I ran the query with UserID from RSECADMIN and I could open the query. But if I want to select 0profit_ctr I get this error No authorization to characteristic values.
I checked the log and this is the message.
Value Authorization
InfoProvider FIGL_MP1
Value Authorization for Characteristic 0PROFIT_CTR
Building the Buffer...
Building the Buffer...
No Authorization for Values
thanks

Log is filled with AFP_VFS afpfs_vnop_getxattr: bad dataLength offset 2 replySize 2

Similar Messages

Maybe you are looking for