Log mining is taking too much time in logical standby database
dear DBAs,
today i found a gap between the production database and the logical standby database and i found that the log mining is taking more than 1 hour to complete an archivelog (size: 500M)
note that the MAX_SGA is 1500M and the MAX_SERVERS=45
the databases is 10gR2 (10.2.0.5.0) running on a linux machine RHEL 4
please your help.
thx in advance
Elie
hi,
can you check metalink id [ID 241512.1]
thanks
Similar Messages
-
Resizing tablespace is taking too much time and freezing the database
This is my database setup:
3 node rac on 32 bit linux (rh 4)
2 SANs (3gb + 2 gb)
asm config: everything is default from installation
current datafiles: 3.2T out of 5.0T (autoextend on)
this is how I do to resize the tablespace manually to test how long it takes:
alter tablespace my_tbs resize 3173562M; //from 3172538M (adding another 1gb)
And it took 33 minutes to complete.
Could someone tell me what is wrong?
ps:: when i check the instance performing, the "SMON" user is like 97% of db activities. And while the resizing is running, the database seem to freeze.
Thanks,
Chau
Message was edited by:
user626162sorry, it is 5 Tera bytes total.
there are 2 sans, one is 1.7T (one partition). the other san has 3 partitions with 1.1T each. I have only 1 datagroup
I used big file so there is only one big file for this tablespace. the size of the tablespace is 3.2T used with autoextend on (increment size is 1G)
this is the command I used to manually resize the tablespace:
alter tablespace my_table_space resize <3229923M>; //current size + 1G
Thanks,
Chau -
Taking too much time (1min) to connect to database
Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
NaseerDear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C -
Sites Taking too much time to open and shows error
hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful. -
Taking too much time to load application
Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/ -
Why it is taking too much time to kill the process?
Hi All,
Today,one of my user ran the calc script and the process is taking too much time, then i kill the process. I am wondering about one thing here even it is taking too long to kill the process, generally it will not take more than 2 sec. I did this through EAS.
After that I ran Maxl statement
alter system kill request 552599515;
there is no use at all.
Please reply if you have any solutions to kill this process.
Thanks in advance.
Ram.Hi Ram,
1. Firstly, How much time does your calculation scripts normally run.
2. While it was running, you can go to the logs and monitor where exactly the script is taking time .
3. Sometimes, it does take time to cancel a transaction ( as it might be in between).
4. Maxl is always good to kill ,as you did . It should be succesful . Check the logs what it says ,and also the "sessions" which might say "terminating" and finish it off.
5. If nothing works ,and in the worst case scenarion , if its taking time without doing anything. Then log off all the users and stop the databas and start it .
6. Do log off all the users, so that you dont corrupt any filter related sec file.
Be very careful , if its production ( and I assume you have latest backups)
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/ -
Report taking too much time in the portal
Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridathHi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM -
Importing is taking too much time (2 DAYS)
Dear All,
I'm Importing below support packages together in a queue @ SAP Solution manger 4 .
SAPKB70015 Basis Support Package 15 for 7.00
SAPKA70015 ABA Support Package 15 for 7.00
SAPKITL426 ST 400: Patch 0016, CRT for SAPKB70015
SAPKIBIIP6 BI_CONT 703: patch 0006
SAPKIBIIP7 BI_CONT 703: patch 0007
SAPKIBIIP8 BI_CONT 703: patch 0008
SAPK-40010INCPRXRPM CPRXRPM 400: patch 0010
SAPK-40011INCPRXRPM CPRXRPM 400: patch 0011
SAPK-40012INCPRXRPM CPRXRPM 400: patch 0012
SAPKIPYJ7E PI_BASIS 2005_1_700: patch 0014
SAPKW70016 BW Support Package 16 for 7.00
importing is taking too much time (2 DAYS) in main import phase, I have seen SLOG, there are many rows " I am waiting 1 sec and 6 sec . and also checked transaction code STMS all support packages imported except one support package "SAPKW70016 "
Please advice.
Best Regards'
HEHello Mohan,
The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
Note 531923 - Audit Trail: Indexes on table DBTABLOG
Note 579980 - Table logs: Performance during access to DBTABLOG
Regards,
Siddhesh -
Job is taking too much time during Delta loads
hi
when i tried to extract Delta records from R3 for Standard Extractor 0FI_GL_4 it is taking 46 mins while there are very less no. of delta records(193 records only).
PFA the R3 Job log. the major time is taking in calling the Customer enhacement BW_BTE_CALL_BW204010_E.
please let me know why this is taking too much time.
06:10:16 4 LUWs confirmed and 4 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
06:56:46 Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 193 records
06:56:46 Result of customer enhancement: 193 records
06:56:46 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 193 records
06:56:46 Result of customer enhancement: 193 records
06:56:46 Asynchronous sending of data package 1 in task 0002 (1 parallel tasks)
06:56:47 IDOC: InfoIDOC 2, IDOC no. 121289649, duration 00:00:00
06:56:47 IDOC: Begin 09.05.2011 06:10:15, end 09.05.2011 06:10:15
06:56:48 Asynchronous sending of InfoIDOCs 3 in task 0003 (1 parallel tasks)
06:56:48 Through selection conditions, 0 records filtered out in total
06:56:48 IDOC: InfoIDOC 3, IDOC no. 121289686, duration 00:00:00
06:56:48 IDOC: Begin 09.05.2011 06:56:48, end 09.05.2011 06:56:48
06:56:54 tRFC: Data package 1, TID = 3547D5D96D2C4DC7740F217E, duration 00:00:07, ARFCSTATE =
06:56:54 tRFC: Begin 09.05.2011 06:56:47, end 09.05.2011 06:56:54
06:56:55 Synchronous sending of InfoIDOCs 4 (0 parallel tasks)
06:56:55 IDOC: InfoIDOC 4, IDOC no. 121289687, duration 00:00:00
06:56:55 IDOC: Begin 09.05.2011 06:56:55, end 09.05.2011 06:56:55
06:56:55 Job finished
Regards
AtulHi Atul,
Have you written any customer exit code . If yes check for the optimization for it .
Kind Regards,
Ashutosh Singh -
Delete query taking too much time
Hi All,
my delete query is taking too much time. around 1hr 30 min for 1.5 lac records.
Though I have dropped mv log on the table & disabled all the triggers on it.
Moreover deletion is based on primary key .
delete from table_name where primary_key in (values)
above is dummy format of my query.
can anyone please tell me what could be other reason that query is performing that slow.
Is there anything to check in DB other than triggers,mv log,constraints in order to improve the performance?
Please reply asap.Delete is the most time consuming operation, as the whole record data has to be stored at the undo segments. On the other hand, there is a part of the query used to select records to delete that probably is adding an extra overhead to the process, the in (values) clause. It would be nice on your side to post another dummy from this (values) clause. I could figure out this is a subquery, and in order for you to obtain this list you have to run a inefficient query.
You can gather the execution plan so you can see where the most heavy part of th query is. This way a better tuning approach and a more accurate diagnostic can be issued.
~ Madrid. -
Transport in BI-Production taking too much time.
Hi Experts,
Whenever I am transporting from BQA to BPA its taking too much time i.e 4-5 hours for 1 transport. The system is newly built i.e the BI-PRD system. Sgen has been performed and all the post installation activities too.
Can anyone help?Hi Santanu,
I believe the transports are getting imported, but it is taking much time. So, I believe RDDIMPDP job is already scheduled.
Please let us know the transport log if the issue persists.
Regards,
Sujit. -
Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.
stop the download if it's stalled, and restart your download.
-
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
SAP GUI taking too much time to open transactions
Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
RameshHi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier -
Taking too much time in Rules(DTP Schedule run)
Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sreeHi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy
Maybe you are looking for
-
"Word was unable to open the data source" error message in mail merge
I am trying to do a mail merge in Word 2008 for Mac and receive this message when I try to open the Excel file for the data. Can someone please help? I tried changing the filename to .xls (originally .xlsx) but it didn't work.
-
Problems with PS CS4 and sketch tablet
I having problems with my sketch tablet everytime I start PS CS4 I only can use my primary screen with the pen.. As long as CS4 is not running I can use the dual screen without problems. Anyone have any clues how to fix it? I have the latest drivers.
-
Problems in the installation of Trial Version 71 CE SR3
Hi, I am trying to install the trial version of NW 71 CE SR3. I donwloaded it from SDN. The target system is a Windows XP Prof SP2 with 2 Gb of RAM. The error I get is in the system requirements check. A swap file of 4096 Mb is required and I do not
-
Hello Experts... i have a problem when using ACS 5.1 with AP1141 through EAP-TLS authentication method. when i try to connect my laptop , it's authenticated sucessfully , but when i try to authenticate third party Black Box using EAP-TLS , i have an
-
i have to develop a web base applecation which is database indepandent, to achive this functionlity i have to use DAO design pattern. can some one explane me more about this............................