Log off from ABAP Program

I Wonder whether it is possible to write an abap program
which fulfills following requirement.
just like the tcode which is used to log off /nex.
but it closes all sap windows without warning on the same server.
what i want,
i want to write a progam and then create a tcode for that say zex.
on entering that tcode the system close all sap window on the same server except one.
eg:
say i have opened 4 sessions of prd server. and i want to close 3 of them.
then i execute custom tcode say zex. and out of 4 --3 sessions will be closed.
no of sessions to be closed = total no of open sessions - 1.
dont know whether it is possible>
ur suugesstions wanted.
there are FM present.
THUSRINFO
call 'syst_logoff'.
but none of them suits to my requirement.,

Get list of modes and delete specific modes are not easy, you will mostly require use of "forbidden" call system command like ThUsrInfo.
What if you want to try ?
Look at include TSKHINCL for opcode values, perform some where-used on those constants, if unlucky you find SAP report using the system calls, if you are lucky the call is executed in a useful function module (name starting with TH_)
The result could look like following samples, informative only, neither tested nor intended to be tested...
DATA: tid TYPE utid,
      modes TYPE sy-index,
      mode_list type table of modus with HEADER LINE,
      modus type modus.
* Current session id (Look at TH_USER_INFO)
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_usr_attr
ID 'TID' FIELD tid. " Id of current session
* Number of modes (Look at form modus_liste of RSM04000_ALV)
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_mode_count
ID 'TID' FIELD tid
ID 'MODES' FIELD modes. " number of modes
CHECK modes GT 1.
* List of modes with transaction (Look at TH_SELECT_MODE)
*CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_get_mode_list
*    ID 'TID' FIELD tid
*    ID 'MODE_LIST' FIELD mode_list. " mode list
* Delete a Mode (Look at TH_DELETE_MODE)
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_delete_mode
     ID 'MODE' FIELD mode.
Try in a sandbox...
Regards,
Raymond
PS: /nex is not an actual transaction, trying to enter in debug mode (even system) in what is probably a C program gives little chance of success...

Similar Messages

Is it possible to call website from ABAP Program?

Hi Experts,
       Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
       EXPORTING
            program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
            commandline     = URL_TABLE
            INFORM         = ''
          EXCEPTIONS
            PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
     WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Sending emails from ABAP program

Hi,
I need to send error emails from ABAP program.
I have to pass error internal table as text (not as attachment) in the email.
Can anybody supply any sample code?
Thanks in advance.
Regards,
Arun Mohan

HI,
See if this code helps:
***Sending mail to the receipients
if not it_final[] is initial.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Sales Register Report - Set Top Box / Accessories'
'XLS'
'SSTB'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
endif.
*& Form BUILD_XLS_DATA_TABLE
text
--> p1 text
<-- p2 text
FORM BUILD_XLS_DATA_TABLE .
data: wa_itab like it_final.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'Business Place' 'Region Code' 'Region' 'Branch Code'
'Branch' 'Material Desc' 'Area off Code'
'Area Name' 'Zone code' 'Zone Name' 'Cust No' 'Cust Name'
'Bill Doc No' 'Bill Date' 'Base Val' 'Total Val' 'Quantity'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_FINAL INTO WA_ITAB.
CONCATENATE WA_ITAB-BUSINESS_PLACE
WA_ITAB-KVGR1
WA_ITAB-REGION
WA_ITAB-VKBUR
WA_ITAB-SALES_OFF
WA_ITAB-ARKTX
WA_ITAB-vkgrp
WA_ITAB-sales_grp
WA_ITAB-bzirk
WA_ITAB-zone
WA_ITAB-kunnr
WA_ITAB-name
WA_ITAB-vbeln
WA_ITAB-fkdat
WA_ITAB-base_value
WA_ITAB-total_value
WA_ITAB-fkimg
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form POPULATE_EMAIL_MESSAGE_BODY
text
--> p1 text
<-- p2 text
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
CONCATENATE SY-DATUM6(2) '/' SY-DATUM4(2) '/' SY-DATUM+0(4) INTO G_DATE.
IT_MESSAGE = 'Please find attached excel sheet.'.
APPEND IT_MESSAGE.
IT_MESSAGE = 'Sales Register Report - Set Top Box / Accessories'.
APPEND IT_MESSAGE.
Concatenate 'Report generated date' ':' G_Date '.' into IT_MESSAGE.
APPEND IT_MESSAGE.
clear it_message.
append it_message.
IT_MESSAGE = 'This is an autogenerated mail, please do not reply'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
T_PACKING_LIST-OBJ_NAME = 'stb'.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-DOC_TYPE = 'XLS'.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_DESCR = 'Sales_STB'.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-OBJ_NAME = 'stb'.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT IT_RECV.
T_RECEIVERS-RECEIVER = IT_RECV-EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-COPY = 'X'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
text
--> p1 text
<-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = ''
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Subramanian

How to log off from SNC portal

This is a very basic question. I did not find any button or menu option to log off. Sometimes I get the message that the transaction is still running in another session, and I find it very difficult to log off. I normally close the browser and then log off from the SCM system. But if I am not logged onto SAP and I open the portal directly, How do I log off?
Your help is appreciated.
Thanks
Soumen

Hi Soumen,
There is no logoff button in SNC Web portal.
You can close the SNC web protal to logoff.
About your issue when you logoff it will locks your query as it is not logoff straight a way solution is create another query so that you can use another query or go to transaction SM04 and logoff your user-
Regards,
Nikhil

HT1694 I lost my iphone, how can I log off from my mail and how can I deactivate whatsapp

I lost my iphone today and I need desperately to log off from all my accounts etc coz there is information there not for everyone to see

Contact your carrier and the police. If it was lost in a specific building, ask the people running it.
(124410)

XML files from ABAP programs

Hi everyone!
Is there a way in ABAP to output XML files? Pls. send code/ function module if any.
From ABAP programs, we are sure that we can output TEXT files, but how about XML files?
The significance of this question is related
Currently we are using XI to interface SAP and AMS, this question for ABAP to produce XML file arose, if for example, the XI server is down and we have to still send data from one system to another. IDocs can also produce XML files, pls confirm. Earlier however, we have preferred XI rather than IDocs to do this. Anyway, any idea regarding this scenario will be greatly appreciated.
Thanks and God bless!
Celeste

Hi,
Please check this sample codes from other thread.
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
*-------------- DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
******************************* FIRST PHASE
******************************* FIRST PHASE
******************************* FIRST PHASE
*------------------ Fetch Data
SELECT * FROM t001 INTO TABLE t001.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = xml_out
* IMPORTING
* LENGTH =
TABLES
FTEXT_TAB = itab.
*-------------- Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:xx.xml'
TABLES
data_tab = itab.
******************************* SECOND PHASE
******************************* SECOND PHASE
******************************* SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
Regards,
Ferry Lianto

How can we create the error log in a ABAP program

Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.

Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale

Call workflow from ABAP program

created a zbusiness object (ZPRODH)with
one key field product hierarchy,
one attribute level number and
one method display.
I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
In the abap program I am calling the funcion module, I
CALL FUNCTION 'SWW_WI_START_SIMPLE'
EXPORTING
TASK = TASK
IMPORTING
WI_ID = WI_ID
TABLES
AGENTS = AGENTS
WI_CONTAINER = WI_CONTAINER.
It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
Thanks in advance

ttpa,
Please check this thread:
Re: Workflow from abap program
Also check that your Fm do requires any explicit commit or not?
Hope it will help u
Cheers
Jai

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

Execute webdynpro from abap program and return to the caller program

Guys,
I have a question here.
I know there is a way to call an abap webdynpro application from normal abap program by either using a class method, or use a function module WDY_EXECUTE_IN_PLACE by providing
the webdynpro application or using CALL TRANSACTION statement.
But, is there anyways that we can call the webdynpro application from abap program by supplying data to the webdynpro and display to the user from the portal, and then
once the user do some manipulation on the data, can we transfer back the data to the caller abap program?

hey ,
you can pack any web-dynpro program in tranasaction code and run it from R/3 and not via portal :
search in " SAPTECHNICAL" how to do so - for some reason i cant post a link here
than you can use call transaction .
regards
ASA

Procedure to Call Workflow Object from ABAP program in Se38

Hi All,
I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
I have to select some records from database table.For example there are 100 records in the internal table.
For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
Please suggest me how to move forward with this scenario.
Regards
Manas Ranjan Panda

Hi,
So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
Kind regards, Rob Dielemans

To post a mail from ABAP program

dear friends
              how to post a mail to SAP inbox of a particular user from ABAP program.

get the spool no of the program
we have standard program rstxpdf4 through that convert it to pdf
and through f.m SO_NEW_DOCUMENT_ATT_SEND_API1 u can send mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
   EXPORTING
     DOCUMENT_DATA                    = x_document_data
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
   TABLES
     PACKING_LIST                     = it_packing_list
     CONTENTS_BIN                     = it_contents_bin
     CONTENTS_TXT                     = it_contents_txt
     RECEIVERS                        = it_receivers
EXCEPTIONS
    TOO_MANY_RECEIVERS               = 1
    DOCUMENT_NOT_SENT                = 2
    DOCUMENT_TYPE_NOT_EXIST          = 3
    OPERATION_NO_AUTHORIZATION       = 4
    PARAMETER_ERROR                  = 5
    X_ERROR                          = 6
    ENQUEUE_ERROR                    = 7
    OTHERS                           = 8 .
IF SY-SUBRC <> 0.
   retcode = sy-subrc.
   perform protocol_update.
else .

Sending an email to users from abap program

Hi experts ,
How to send an email to users from abap program ...
i need full coding please..so that i can copy and paste it in my program.
Thank you in advance.
Rajasekhar.P

Hi Venkat
check the below simple code to convert spool to HTML and email it
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata   like sodocchgi1.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0 with header line.
start-of-selection.
Produce a list
do 100 times.
    write:/ sy-index, at 30 sy-index, at 50 sy-index.
enddo.
Save the list
call function 'SAVE_LIST'
       tables
            listobject         = list
       exceptions
            list_index_invalid = 1
            others             = 2.
Convert the list
call function 'WWW_LIST_TO_HTML'
       tables
            html = htmllines.
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Passing data from abap-program to mssql database table thro native sql

Hi,
To pass the data from abap-program to mssql server,i have created database connection through dbco t.code.
now i am trying to get connection thro native sql but am not able to get it .Am working in ECC 5.0.
Could anyone help me on this.Did i miss anything?
i have tried Native-sql like this.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
  CONNECT TO :con_name AS 'C1'
ENDEXEC.
Thanks in advance.

Hi,
Trying to do the same here, only using Oracle DB.
DATA:     dbc TYPE DBCON_NAME VALUE 'BI'
TRY.
EXEC SQL.
    CONNECT TO :dbc
ENDEXEC.
IF sy-subrc NE 0.
    RAISE EXCEPTION TYPE cx_sy_native_sql_error.
ENDIF.
CATCH cx_sy_native_sql_error INTO oref_native_sql_error.
sql_emsg = oref_native_sql_error->get_text( ).
MESSAGE sql_emsg TYPE 'I'.
ENDTRY.
I keep getting the message 'Native SQL exception has occured' (because of the RAISE statement, I wonder how we can get a meaningfull error description).
Of course this can be a result of a number of network issues, so I'm trying to resolve this together with my BC admin.
I suggest the same to you..
In the meantime, if anyone can help out, it will be appreciated.
Regards,
SD

Log off from ABAP Program

Similar Messages

Maybe you are looking for