Log Problem
I have purchased a nokia e6 new days back..... i have kept the call log for 30 days but i m only able to see the log for 20 entries..... so only 20 in dialled recd n missed each.... n unable t trace the old data...... so basically the log is not even for a single day.... how to solve the issue.....
you cant go into a log that exceeds 20 numbers....
Join my movement to bring a change in NOKIA for good by supporting my FORUM
http://discussions.europe.nokia.com/t5/Eseries-and-Communicators/NOKIA-MODERATORS-ONLY/td-p/1318965
Similar Messages
-
error logging problem:
I would like to implement an error logger that will do the following tasks when a error/exception arrises:
- surpress the DacfErrorPopupLogger
- alert the user that an error has occured with a simplified popup (create a global listener then use the ErrorAttributes to create the text of the popup)
- log the error in a file with a timestamp and all error information
- later if the above works....i would like to add the error attributes (time stamp, error type) to a oracle object/ Jdev domain.
Questions:
What is the best technique to use....errorManager, error logger ...?? combination
How do i use the error manager to register listners for the errors?.
In the following code i am not sure how to access the ErrorsAttributes[] array that is returned by loggerReader.getErrors();
Any general tips places to find sample code on errorManager or associated interfaces, will be appreciated
I used the OutPutStreamLogger to write error information to a FileOutputStream then a loggerReader to get the error attributes from the file. The reason i went in this direction is because i found some smple code on the outputStream logger.
package DACVideo;
import oracle.dacf.util.errorloggers.*;
import oracle.dacf.util.errormanager.*;
import oracle.dacf.util.errorloggers.InputStreamLoggerReader.ErrorAttributes;
import java.io.*;
* A Class class.
* <P>
* @author Adam Maddox
public class ErrorLogger extends Object {
static OutputStreamLogger logger = null;
static InputStreamLoggerReader loggerReader = null;
public ErrorLogger() {
System.out.println("==============ErrorLogger Created==============");
//remove default error logger (popup logger)
ErrorManager.removeErrorLogger(ErrorManager.findLoggerByName(DacfErrorPopupLogger.NAME));
try
logger = new OutputStreamLogger(new FileOutputStream("out.dat"));
loggerReader = new InputStreamLoggerReader(new FileInputStream("out.dat"));
catch(java.io.IOException e)
System.err.println("Error!");
try
ErrorManager.addErrorLogger(logger);
catch(NameAlreadyRegisteredException e)
System.err.println("A Logger with this name is already registered.");
private void closeErrorLog()
//close the OutputStream, to force flushing
logger.closeOutputStream();
ErrorManager.removeErrorLogger(logger);
public static void showErrorLog()
ErrorAttributes[] errorArray = loggerReader.getErrors(); <<<<CANNOT GET ERROR ATTRIBUTES ??
nullJDev could you help??
-
dear members,
I have a log problem with my x2-02, only the last occurrence belonging to a certain contact (in the contacts book), is logged. When a new handling-occurence linked to this contact happened, only this last handling is logged (all the previous are deleted, not there anymore).
This was not the situation before, I did play a little bit through the menu and after that it happened. Of course I did already try the regular solutions, soft reset-hard reset, reinstalling the (latest software). But till now nothing did work.
Can someone assist on this
Greetings
Fiesta
hollanddear members
I would like to contribute the following, I noticed an other bug, which i think occured simultaneously/is linked together. When i go to contacts, and choose the option "View conversations" i see with certain persons, that there are also conversations (sms messages) not pertaining/belonging to that contact (belonging to more different contacts).
Does this bell ring some where?
greetings
fiesta -
OS X kernel logs problem when USB flash drive connected.
Previously, my Creative Nomad Muvo TX (MP3 player/1GB USB memory stick) worked fine with my Intel Mac mini (10.4.8) until the latest EFI 1.1 update.
Now the USB drive does not mount or appear in finder. It is visible in the System Profiler in the USB section, but the disk utility does not see it.
While the USB stick is plugged in, the system logs the following line repeatedly:
Nov 26 21:32:39 kernel[0]: USBF: 2517.425 AppleUSBEHCI[0x3969000]::Found a transaction past the completion deadline on bus 253, timing out!
Booting in Windows XP (with bootcamp) and plugging in the USB memory stick works fine. So the USB stick and the Mac mini hardware is functioning.
Other USB 2 external harddrives are functioning properly in OS X.
I suspect that the latest Mac OS X or EFI 1.1 firmware update has spoilt my previously happy USB memory stick connection.
Any suggestions?
Thanks in adcvance.
StephanusHi, Stephanus.
1. If Creative does not support that device with a Mac, then that should tell you something. Even if it worked in the past, since they don't support it, there's no guarantee that changes to Mac OS X would render it unusable as you've noted. With that kind of attitude from Creative, I'd think about switching to an iPod...
Since you can use it when booted into Windows with Boot Camp, you might want to consider running Parallels Desktop for Mac. This leverages the virtualization technology of the Intel chips, permitting you to run Mac OS X and Windows simultaneously, rather than having to boot into Windows with Boot Camp. Parallels is cheaper than buying an iPod.
2. The USB message you reported is essentially indicating that the OS detected a USB device but cannot talk to it. This is unlikely to be something you're going to work around, e.g. with Terminal.
3. If you want to pursue this further, you can:3.1. Install the USB debug kit for your version of Mac OS X. Apple provides a variety of Mac OS X USB Software Debug Versions that "are used to provide information about USB device and interface detection, driver and interface matching, driver loading and information generated as a result of normal and abnormal conditions." You could install the package corresponding to the version of Mac OS X you are running and this may help identify if the issue is a USB problem and the exact USB anomaly causing such.
3.2. Take what you've been able to lear from the USB debugger and do one or more of the following:• Join the Apple USB Mailing List. Once your registration is approved, submit a question including the enhanced output from the USB logger and requesting additional advice. That list is monitored by developers of USB devices. Posts are sometimes answered by Apple engineers.
• Join the Apple Developer Connection at the "free" level, then submit a bug report.
• Submit a Mac OS X Feedback.If Creative has their own forums, ala Discussions, you might also want to search or post there for similar reports.Unfortunately, that's about all I have to offer at this point: I don't have the Creative device and hence can't test it.
I think that Creative is disinterested in helping you is a key issue you need to consider.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Hi Specialist
I created a payment medium using the transaction F110. In the Log Poporsal I didnt find any error, but in the payment log I found it:
BFIBL02167 Document 2000 1400259728 2011 either not found or reversed, payment not on payment medium
The payment was 04.11.2011 and the reversal on 14.11.2011 .. but in my file I couldnt find some documents according to the error.
After that I investigate in the transaction FBPM ( LOG ERROR Payment medium )
And I found more information:
Document 2000 1400259728 2011 either not found or reversed, payment not on payment medium
Message no. BFIBL02167
Diagnosis
In the payment document validation that you selected in the selection variant of the generic payment medium program SAPFPAYM, the system determines that payment document 2000 1400259728 2011 has either not yet been posted or has already been reversed.
System Response
The payment is not transferred on a payment medium in order to avoid a duplicate payment: the items to be paid remain open and could be paid again with a new payment run.
Procedure
If, for an update termination, you find it is then possible to post the document, you can subsequently create another payment medium only containing this missing document. To do this, in the dynamic selections select only the reference to document 200014002597282011
DO you know why I get this error?? The payment was succesfully but I couldnt find it in my DMEE estructure ( the file ) .
THank you
RegardsHi , thanks for reply.
Not really. I created the payment method 04.11.2011 and I sent the file to the bank. The problem was the rejection that I received 14 days later.
Then when i check the file again I found this errors.
It means that I generate the and the payment the same day.
Thanks -
Hello! console log problem with window server
Hello! I installed today moutain lion, it's all perfect but i have a question...i was checking the console log, and there are a lot of messages like that:
26/07/12 00:04:10,682 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
26/07/12 00:04:17,796 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
26/07/12 00:04:42,979 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
26/07/12 00:04:46,366 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
everytime i swap to a full-screen app, a new line of that appear..hmm..it's ok or there are some problems?
thanks in advance!cool! 'cause if i go to the app by mission control, console is clean...if i swap with the gesture..there is the log! maybe it's a feature of mountain lion by the way, pratically there aren't problem, only the massive logging in console..
-
Java.util.logging - Problem with setting different Levels for each Handler
Hello all,
I am having issues setting up the java.util.logging system to use multiple handlers.
I will paste the relevant code below, but basically I have 3 Handlers. One is a custom handler that opens a JOptionPane dialog with the specified error, the others are ConsoleHandler and FileHandler. I want Console and File to display ALL levels, and I want the custom handler to only display SEVERE levels.
As it is now, all log levels are being displayed in the JOptionPane, and the Console is displaying duplicates.
Here is the code that sets up the logger:
logger = Logger.getLogger("lib.srr.applet");
// I have tried both with and without the following statement
logger.setLevel(Level.ALL);
// Log to file for all levels FINER and up
FileHandler fh = new FileHandler("mylog.log");
fh.setFormatter(new SimpleFormatter());
fh.setLevel(Level.FINER);
// Log to console for all levels FINER and up
ConsoleHandler ch = new ConsoleHandler();
ch.setLevel(Level.FINER);
// Log SEVERE levels to the User, through a JOptionPane message dialog
SRRUserAlertHandler uah = new SRRUserAlertHandler();
uah.setLevel(Level.SEVERE);
uah.setFormatter(new SRRUserAlertFormatter());
// Add handlers
logger.addHandler(fh);
logger.addHandler(ch);
logger.addHandler(uah);
logger.info(fh.getLevel().toString() + " -- " + ch.getLevel().toString() + " -- " + uah.getLevel().toString());
logger.info("Logger Initialized.");Both of those logger.info() calls displays to the SRRUserAlertHandler, despite the level being set to SEVERE.
The getLevel calls displays the proper levels: "FINER -- FINER -- SEVERE"
When I start up the applet, I get the following in the console:
Apr 28, 2009 12:01:34 PM lib.srr.applet.SRR initLogger
INFO: FINER -- FINER -- SEVERE
Apr 28, 2009 12:01:34 PM lib.srr.applet.SRR initLogger
INFO: FINER -- FINER -- SEVERE
Apr 28, 2009 12:01:40 PM lib.srr.applet.SRR initLogger
INFO: Logger Initialized.
Apr 28, 2009 12:01:40 PM lib.srr.applet.SRR initLogger
INFO: Logger Initialized.
Apr 28, 2009 12:01:41 PM lib.srr.applet.SRR init
INFO: Preparing Helper Files.
Apr 28, 2009 12:01:41 PM lib.srr.applet.SRR init
INFO: Preparing Helper Files.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Getting PC Name.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Getting PC Name.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Finished Initialization.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Finished Initialization.Notice they all display twice. Each of those are also being displayed to the user through the JOptionPane dialogs.
Any ideas how I can properly set this up to send ONLY SEVERE to the user, and FINER and up to the File/Console?
Thanks!
Edit:
Just in case, here is the code for my SRRUserAlertHandler:
public class SRRUserAlertHandler extends Handler {
public void close() throws SecurityException {
public void flush() {
public void publish(LogRecord arg0) {
JOptionPane.showMessageDialog(null, arg0.getMessage());
}Edited by: compbry15 on Apr 28, 2009 9:44 AMFor now I have fixed the issue of setLevel not working by making a Filter class:
public class SRRUserAlertFilter implements Filter {
public boolean isLoggable(LogRecord arg0) {
if (arg0.getLevel().intValue() >= Level.WARNING.intValue()) {
System.err.println(arg0.getLevel().intValue() + " -- " + Level.WARNING.intValue());
return true;
return false;
}My new SRRUserAlertHandler goes like this now:
public class SRRUserAlertHandler extends Handler {
public void close() throws SecurityException {
public void flush() {
public void publish(LogRecord arg0) {
Filter theFilter = this.getFilter();
if (theFilter.isLoggable(arg0))
JOptionPane.showMessageDialog(null, arg0.getMessage());
}This is ugly as sin .. but I cannot be required to change an external config file when this is going in an applet.
After much searching around, this logging api is quite annoying at times. I have seen numerous other people run into problems with it not logging specific levels, or logging too many levels, etc. A developer should be able to complete configure the system without having to modify external config files.
Does anyone else have another solution? -
Physical standby database standby redo log problem
Hello
We have a physical standby database , I've created some standby redo log files but my problem is that they aren't used,
their status in v$stanby_log view is UNASSIGNED
and I see this message (ORA-16086: standby database does not contain available standby log files) in primary database alert_log file
while when I run "alter system switch logfile" in the primary database it transfer redo logs to the physsical standby database
and archive log file will be created in standby database
I've even recreated the standby redo log files and I added new ones to them but the problem wasn't solved
Do you know what is problem ?
elect group#,THREAD#,BYTES,STATUS from V$STANDBY_LOG;
group# THREAD# BYTES STATUS
1 0 524288000 UNASSIGNED
2 0 524288000 UNASSIGNED
3 0 524288000 UNASSIGNED
8 0 524288000 UNASSIGNED
9 0 524288000 UNASSIGNED
10 0 524288000 UNASSIGNED
select group#,THREAD#,BYTES,MEMBERS,STATUS from v$log;
group# THREAD# BYTES MEMBERS STATUS
4 1 524288000 2 CLEARING
7 1 524288000 2 CLEARING_CURRENT
6 1 524288000 2 CLEARING
5 1 524288000 2 CLEARING
thanksHello Anurag
Thank you for your reply
I have found some issue in the standby database alert_log too , in the standby database alert_log it has been written:
RFS[782]: Assigned to RFS process 3919
RFS[782]: Identified database type as 'physical standby'
Primary database is in MAXIMUM AVAILABILITY mode
Standby controlfile consistent with primary
Primary database is in MAXIMUM AVAILABILITY mode
Standby controlfile consistent with primary
RFS[782]: No standby redo logfiles selected (reason:6)
Sun Jan 31 13:59:43 2010
Errors in file /u01/app/oracle/admin/tehrep/udump/tehrep_rfs_3919.trc:
ORA-16086: standby database does not contain available standby log files
Sun Jan 31 13:59:48 2010
RFS[781]: Archived Log: '/disks/sda/tehrep/archivelogs/1_6516_670414641.dbf'
Sun Jan 31 13:59:50 2010
and the context "/u01/app/oracle/admin/tehrep/udump/tehrep_rfs_3919.trc" is below :
+/u01/app/oracle/admin/tehrep/udump/tehrep_rfs_3919.trc+
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
System name: Linux
Node name: linserver2.com
Release: 2.6.9-42.ELsmp
Version: #1 SMP Wed Jul 12 23:27:17 EDT 2006
Machine: i686
Instance name: tehrep
Redo thread mounted by this instance: 1
Oracle process number: 58
Unix process pid: 3919, image: [email protected]
*** SERVICE NAME:() 2010-01-31 13:59:43.865
*** SESSION ID:(109.1225) 2010-01-31 13:59:43.865
KCRRFLAS
KCRRSNPS
No space in recovery area for active standby redo logs
The primary database is operating in MAXIMUM PROTECTION
or MAXIMUM AVAILABILITY mode, and the standby database
does not contain adequate disk space in the recovery area
to safely archive the contents of the standby redo logfiles.
ORA-16086: standby database does not contain available standby log files
when I saw this line "No space in recovery area for active standby redo logs" I thought that STANDBY_ARCHIVE_DEST parameter points where that there is no enough space , but when I consider I found out that points a directory on disk a "sda" that has enough space , I don't know what that means
by the way, at below I've written a section of the primary database alert_log context and "lgwr" trace file around Sun Jan 31 13:30:34 2010
alert_log :
ORA-16086: standby database does not contain available standby log files
Sun Jan 31 13:30:34 2010
LGWR: Failed to archive log 7 thread 1 sequence 6512 (16086)
Thread 1 advanced to log sequence 6512
Current log# 7 seq# 6512 mem# 0: /disks/sdb/tehrep/redo71.log
Current log# 7 seq# 6512 mem# 1: /disks/sdd/tehrep/redo72.log
LNSc started with pid=53, OS id=11451
Sun Jan 31 13:36:34 2010
Errors in file /u01/app/oracle/admin/tehrep/bdump/tehrep_lgwr_3692.trc:
ORA-16086: standby database does not contain available standby log files
Sun Jan 31 13:36:34 2010
LGWR: Failed to archive log 5 thread 1 sequence 6513 (16086)
Thread 1 advanced to log sequence 6513
Current log# 5 seq# 6513 mem# 0: /disks/sdb/tehrep/redo51.log
Current log# 5 seq# 6513 mem# 1: /disks/sdd/tehrep/redo52.log
*/u01/app/oracle/admin/tehrep/bdump/tehrep_lgwr_3692.trc file :*
Error 16086 creating standby archive log file at host '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=linserver2.com
+)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=tehrep_XPT.com)(INSTANCE_NAME=tehrep)(SERVER=dedicated)))'+
*** 2010-01-31 13:30:34.712 60679 kcrr.c
LGWR: Attempting destination LOG_ARCHIVE_DEST_3 network reconnect (16086)
*** 2010-01-31 13:30:34.712 60679 kcrr.c
LGWR: Destination LOG_ARCHIVE_DEST_3 network reconnect abandoned
ORA-16086: standby database does not contain available standby log files
*** 2010-01-31 13:30:34.712 60679 kcrr.c
LGWR: Error 16086 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=linserver2.com)(PORT=1521
+)))(CONNECT_DATA=(SERVICE_NAME=tehrep_XPT.com)(INSTANCE_NAME=tehrep)(SERVER=dedicated)))'+
*** 2010-01-31 13:30:34.712 58941 kcrr.c
kcrrfail: dest:3 err:16086 force:0 blast:1
Receiving message from LNSc
*** 2010-01-31 13:30:34.718 55444 kcrr.c
Making upidhs request to LNSc (ocis 0x0xb648db48). Begin time is <01/31/2010 13:30:30> and NET_TIMEOUT <180> seconds
NetServer pid:11196
*** 2010-01-31 13:30:38.718 55616 kcrr.c
upidhs done status 0
*** 2010-01-31 13:36:31.062
LGWR: Archivelog for thread 1 sequence 6513 will NOT be compressed
*** 2010-01-31 13:36:31.062 53681 kcrr.c
+Initializing NetServer[LNSc] for dest=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=linserver2.com)(PORT=1521)))(CO+
NNECT_DATA=(SERVICE_NAME=tehrep_XPT.com)(INSTANCE_NAME=tehrep)(SERVER=dedicated))) mode SYNC
LNSc is not running anymore.
New SYNC LNSc needs to be started
Waiting for subscriber count on LGWR-LNSc channel to go to zero
Subscriber count went to zero - time now is <01/31/2010 13:36:31>
Starting LNSc ...
Waiting for LNSc to initialize itself
*** 2010-01-31 13:36:34.116 53972 kcrr.c
+Netserver LNSc [pid 11451] for mode SYNC has been initialized+
Performing a channel reset to ignore previous responses
+Successfully started LNSc [pid 11451] for dest (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=linserver2.com)(PORT=1+
+521)))(CONNECT_DATA=(SERVICE_NAME=tehrep_XPT.com)(INSTANCE_NAME=tehrep)(SERVER=dedicated))) mode SYNC ocis=0x0xb648db48+
*** 2010-01-31 13:36:34.116 54475 kcrr.c
+Making upiahm request to LNSc [pid 11451]: Begin Time is <01/31/2010 13:36:31>. NET_TIMEOUT = <180> seconds+
Waiting for LNSc to respond to upiahm
*** 2010-01-31 13:36:34.266 54639 kcrr.c
upiahm connect done status is 0
Receiving message from LNSc
Receiving message from LNSc
Destination LOG_ARCHIVE_DEST_3 is in STANDBY RESYNCHRONIZATION mode
Receiving message from LNSc -
Logging Problems on CSS11503 - please help
Hi,
1 of our CSS11503 is not functioning properly. Our ITO system is receiving "server down" messages for services but the "server up" message is not coming through.
We have 2 load balancers with identical config, the only difference I can see in them is the following
when I do a "show log-state", the load balancer that is not sending the server up messages has the log level set to "warning" were as the one that works ok is set to "debug".
I have stated in the config log level 7 for our ITO managment system but this value in "sh log-state" is still the same???
Any ideas on how to change this to debug on the css that is not sending the server up messages.
thanksThe UP message is generated at level '5'.
So that's what you need to change indeed.
Usually the problem is that the logging level stays stuck in '7' not '4'.
Are you certain that the command is there ?
What software version ?
The procedure to recover when stuck in level '7' is below.
You can give it a try.
-Reboot and interrupt the boot going into offDM.
-shift T (technicians menu).
-choose "1" for configure.
-then "3" for set logging flags.
-"2" for set logging level (set to level 4).
-then "r" until you're back to the main menu.
-reboot.
Gilles. -
Dear All,
ip: [ID 903730 kern.warning] WARNING: IP: Hardware address '00:03:ba:e4:e1:09' trying to be our address 172.016.000.104!
last message repeated 198 times
tcp: [ID 995438 kern.warning] WARNING: High TCP connect timeout rate! System (port 80) may be under a SYN flood attack!
tcp: [ID 995438 kern.warning] WARNING: High TCP connect timeout rate! System (port 80) may be under a SYN flood attack!
tcp: [ID 995438 kern.warning] WARNING: High TCP connect timeout rate! System (port 80) may be under a SYN flood attack!
Plesae give the solution of this logs.These log entries say there are two problems, which may or may not be related.
First, some other computer on your network has the same IP address as yours. You need to find it (the error gives the other system's Ethernet hardware address).
It is possible the second set of messages is related to this one, but I can't say. Solve the first one and see if the other goes away. -
DB2 Transaction log Problem after set db manuell to Rollforward
Hello,
I have a problem when set the db2 manuell in rollforward mode. After I set the command db2rfpen ON E35 my database (E35) is in rollforward mode.
Now I can see with command "db2 rollforward db E35 query status" the Last committed transaction
but the timestamp of the Last committed transaction is 2106-02-07-06.28.15.000000 UTC
but we do not have year 2106!!
did someone have similar issue or a solution for my problem??
Is it possible to manuell update the table via SQL? But I dont know which table i should update..
Thanks in advanced.
RobinHi,
following output of db2 get snapshot for all databases because db2 get snapshot for database E35 does not work..
there I think the timestamp is also ok. Thanks for your help!
regards
Robin
Database Snapshot
Database name = E35
Database path = /db2/E35/db2e35/NODE0000/SQL00001/MEMBER0000/
Input database alias =
Database status = Active
Catalog database partition number = 0
Catalog network node name = srvnetapp07
Operating system running at database server= LINUXAMD64
Location of the database = Local
First database connect timestamp = 08/11/2014 12:16:58.594371
Last reset timestamp =
Last backup timestamp = 08/08/2014 09:57:42.000000
Snapshot timestamp = 08/11/2014 12:17:46.494342
Number of automatic storage paths = 4
Automatic storage path = /db2/E35/sapdata1
Node number = 0
State = In Use
File system ID = 64782
Storage path free space (bytes) = 23376351232
File system used space (bytes) = 3045990400
File system total space (bytes) = 26422341632
Automatic storage path = /db2/E35/sapdata2
Node number = 0
State = In Use
File system ID = 64783
Storage path free space (bytes) = 23376351232
File system used space (bytes) = 3045990400
File system total space (bytes) = 26422341632
Automatic storage path = /db2/E35/sapdata3
Node number = 0
State = In Use
File system ID = 64784
Storage path free space (bytes) = 23376351232
File system used space (bytes) = 3045990400
File system total space (bytes) = 26422341632
Automatic storage path = /db2/E35/sapdata4
Node number = 0
State = In Use
File system ID = 64785
Storage path free space (bytes) = 23376351232
File system used space (bytes) = 3045990400
File system total space (bytes) = 26422341632
High water mark for connections = 13
Application connects = 9
Secondary connects total = 11
Applications connected currently = 1
Appls. executing in db manager currently = 0
Agents associated with applications = 11
Maximum agents associated with applications= 13
Maximum coordinating agents = 13
Number of Threshold Violations = 0
Locks held currently = 29
Lock waits = 2
Time database waited on locks (ms) = 56
Lock list memory in use (Bytes) = 77568
Deadlocks detected = 0
Lock escalations = 0
Exclusive lock escalations = 0
Agents currently waiting on locks = 0
Lock Timeouts = 0
Number of indoubt transactions = 0
Total Private Sort heap allocated = 0
Total Shared Sort heap allocated = 6
Shared Sort heap high water mark = 245
Post threshold sorts (shared memory) = 0
Total sorts = 2
Total sort time (ms) = 2
Sort overflows = 0
Active sorts = 0
Buffer pool data logical reads = 68507
Buffer pool data physical reads = 1312
Buffer pool temporary data logical reads = 0
Buffer pool temporary data physical reads = 0
Asynchronous pool data page reads = 899
Buffer pool data writes = 0
Asynchronous pool data page writes = 0
Buffer pool index logical reads = 52871
Buffer pool index physical reads = 449
Buffer pool temporary index logical reads = 0
Buffer pool temporary index physical reads = 0
Asynchronous pool index page reads = 0
Buffer pool index writes = 0
Asynchronous pool index page writes = 0
Buffer pool xda logical reads = 0
Buffer pool xda physical reads = 0
Buffer pool temporary xda logical reads = 0
Buffer pool temporary xda physical reads = 0
Buffer pool xda writes = 0
Asynchronous pool xda page reads = 0
Asynchronous pool xda page writes = 0
Total buffer pool read time (milliseconds) = 4912
Total buffer pool write time (milliseconds)= 0
Total elapsed asynchronous read time = 3219
Total elapsed asynchronous write time = 0
Asynchronous data read requests = 454
Asynchronous index read requests = 0
Asynchronous xda read requests = 0
No victim buffers available = 0
LSN Gap cleaner triggers = 0
Dirty page steal cleaner triggers = 0
Dirty page threshold cleaner triggers = 0
Time waited for prefetch (ms) = 982
Unread prefetch pages = 0
Direct reads = 986
Direct writes = 2
Direct read requests = 77
Direct write requests = 1
Direct reads elapsed time (ms) = 243
Direct write elapsed time (ms) = 0
Database files closed = 0
Host execution elapsed time = 5.785568
Commit statements attempted = 16
Rollback statements attempted = 2
Dynamic statements attempted = 6950
Static statements attempted = 23
Failed statement operations = 0
Select SQL statements executed = 6936
Xquery statements executed = 0
Update/Insert/Delete statements executed = 6
DDL statements executed = 0
Inactive stmt history memory usage (bytes) = 0
Internal automatic rebinds = 0
Internal rows deleted = 0
Internal rows inserted = 0
Internal rows updated = 0
Internal commits = 21
Internal rollbacks = 0
Internal rollbacks due to deadlock = 0
Number of MDC table blocks pending cleanup = 0
Rows deleted = 0
Rows inserted = 0
Rows updated = 13838
Rows selected = 13897
Rows read = 141752
Binds/precompiles attempted = 0
Log space available to the database (Bytes)= 333797877
Log space used by the database (Bytes) = 26523
Maximum secondary log space used (Bytes) = 0
Maximum total log space used (Bytes) = 37070
Secondary logs allocated currently = 0
Log pages read = 0
Log read time (sec.ns) = 0.000000000
Log pages written = 13
Log write time (sec.ns) = 0.006250000
Number write log IOs = 9
Number read log IOs = 0
Number partial page log IOs = 7
Number log buffer full = 0
Log data found in buffer = 0
Log to be redone for recovery (Bytes) = 26523
Log accounted for by dirty pages (Bytes) = 26523
Node number = 0
File number of first active log = 90
File number of last active log = 94
File number of current active log = 90
File number of log being archived = Not applicable
Package cache lookups = 6955
Package cache inserts = 20
Package cache overflows = 0
Package cache high water mark (Bytes) = 1026593
Application section lookups = 20824
Application section inserts = 29
Catalog cache lookups = 740
Catalog cache inserts = 55
Catalog cache overflows = 0
Catalog cache high water mark = 429098
Catalog cache statistics size = 0
Workspace Information
Number of hash joins = 4
Number of hash loops = 0
Number of hash join overflows = 0
Number of small hash join overflows = 0
Post threshold hash joins (shared memory) = 0
Active hash joins = 0
Number of OLAP functions = 0
Number of OLAP function overflows = 0
Active OLAP functions = 0
Statistic fabrications = 0
Synchronous runstats = 0
Asynchronous runstats = 0
Total statistic fabrication time (milliseconds) = 0
Total synchronous runstats time (milliseconds) = 0
Memory usage for database:
Node number = 0
Memory Pool Type = Backup/Restore/Util Heap
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 204800000
Node number = 0
Memory Pool Type = Package Cache Heap
Current size (bytes) = 1179648
High water mark (bytes) = 1179648
Configured size (bytes) = 472317952
Node number = 0
Memory Pool Type = Other Memory
Current size (bytes) = 196608
High water mark (bytes) = 196608
Configured size (bytes) = 20971520
Node number = 0
Memory Pool Type = Catalog Cache Heap
Current size (bytes) = 524288
High water mark (bytes) = 524288
Configured size (bytes) = 10485760
Node number = 0
Memory Pool Type = Buffer Pool Heap
Secondary ID = 1
Current size (bytes) = 494010368
High water mark (bytes) = 494010368
Configured size (bytes) = 494010368
Node number = 0
Memory Pool Type = Buffer Pool Heap
Secondary ID = System 32k buffer pool
Current size (bytes) = 1835008
High water mark (bytes) = 1835008
Configured size (bytes) = 1835008
Node number = 0
Memory Pool Type = Buffer Pool Heap
Secondary ID = System 16k buffer pool
Current size (bytes) = 1572864
High water mark (bytes) = 1572864
Configured size (bytes) = 1572864
Node number = 0
Memory Pool Type = Buffer Pool Heap
Secondary ID = System 8k buffer pool
Current size (bytes) = 1441792
High water mark (bytes) = 1441792
Configured size (bytes) = 1441792
Node number = 0
Memory Pool Type = Buffer Pool Heap
Secondary ID = System 4k buffer pool
Current size (bytes) = 1376256
High water mark (bytes) = 1376256
Configured size (bytes) = 1376256
Node number = 0
Memory Pool Type = Shared Sort Heap
Current size (bytes) = 2359296
High water mark (bytes) = 3932160
Configured size (bytes) = 40435712
Node number = 0
Memory Pool Type = Lock Manager Heap
Current size (bytes) = 159645696
High water mark (bytes) = 159645696
Configured size (bytes) = 159711232
Node number = 0
Memory Pool Type = Database Heap
Current size (bytes) = 87687168
High water mark (bytes) = 87687168
Configured size (bytes) = 119472128
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 107
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 106
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 105
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 104
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 103
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 102
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 101
Current size (bytes) = 196608
High water mark (bytes) = 196608
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 100
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 99
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 98
Current size (bytes) = 65536
High water mark (bytes) = 65536
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Application Heap
Secondary ID = 97
Current size (bytes) = 131072
High water mark (bytes) = 131072
Configured size (bytes) = 1048576
Node number = 0
Memory Pool Type = Applications Shared Heap
Current size (bytes) = 458752
High water mark (bytes) = 458752
Configured size (bytes) = 81920000 -
Run away log problem...
My hard drive space keeps getting eaten up by something. I've copied something that keeps repeating in the console log. Can anyone tell me how to fix this problem based on what the console log says? 2009-10-17 18:21:58 ERROR Uncaught Exception:
at now.io.UncaughtExceptionLogger.uncaughtException(null:-1)
java.lang.NoClassDefFoundError
at now.swing.NFrame.<init>(Unknown Source)
at now.swing.NFrame.<init>(Unknown Source)
at now.swing.NFrame.<init>(Unknown Source)
at now.framework.FExceptionReporterFrame.<init>(Unknown Source)
at now.framework.FExceptionReporter$3.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java: 269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:19 0)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I have a 3rd party application called Now Contact. Can this application be the problem here? I can keep deleting the log and get back the hard drive space but what is the fix. Note too that I just had a similar problem with my printer driver. I deleted the driver that was downloaded from the Epson site and deleted the console log, then restarted and all was well. I did go ahead and download another driver and after about 12 hours, I started having the same problems as before. I deleted the printer driver again but this time the problem persists.Hi apolloattitude, and a warm welcome to the forums!
I'm thinking you may have some 3rd party add-on that got broke by past updates...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
Reboot, test again.
You can Have Console open and see if a perticulsr APP causes the messages.
If it only does it in Regular Boot, then it is some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check System Preferences, the Other row for possibilities.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I have upgraded to Anna and now I have a problem with LOG - communication details. Before upgrading to Anna, N8 was showing logs for calls, 3G, GPRS, WIFI connections, but now it shows only calls!?
Solved!
Go to Solution.We were led to believe by Nokia that Anna will be released only when it's ready, that they don't want to release a half-baked update. I thought, that seems a reasonable response to all these delays to the release. So I bided my time thinking that it will be worth the wait.
And now this happens. The log isn't logging important data; kinetic scrolling is worse (more 'friction'; the hacker community even had to release home-cooked patches to correct the scrolling issue); problems were faced while updating to Anna. Some really shoddy stuff. I really, truly believe that Nokia digs itself out of this hole, and starts to deliver. -
Dive Log Problem (Again)
yah, its me again with another problem... I got the divelog to compile correctly, and the welcome code is the same as on the site, but the images wont show up and they are name correctly and in the correct folder... could some one give me some direction in this?
no error pop up when I do it, but here is the code
package divelog;
import javax.swing.*;
import java.awt.*;
public class Welcome extends JPanel
{ // Opens class
private JLabel jl;
private JTextArea ta;
private JLabel diver;
public Welcome()
{//opens constructor
setLayout(new BorderLayout());
setBackground(Color.white);
jl = new JLabel("Java Technology Dive Log", new ImageIcon("images/diveflag.gif"), JLabel.CENTER);
jl.setFont(new Font("Times-Roman", Font.BOLD, 17));
ta = new JTextArea("This application uses a" +
" typical Graphical User Interface (GUI)," +
" featuring AWT layout managers and Project" +
" Swing components, such as buttons, borders," +
" text areas, menus, and more." +
" \n\nIn addition, the dive log's functionality" +
" uses AWT event handlers, methods to manipulate" +
" data, Java I/O to save user input to files," +
" and special classes to include HTML pages with" +
" live links.");
ta.setFont(new Font("SansSerif", Font.PLAIN, 14));
ta.setLineWrap(true);
ta.setWrapStyleWord(true);
ta.setEditable(false);
ta.setBorder(BorderFactory.createTitledBorder(" Welcome to the Java Technology Dive Log "));
diver = new JLabel("", new ImageIcon("images/diver.jpg"), JLabel.CENTER);
add(jl, BorderLayout.NORTH);
add(ta, BorderLayout.CENTER);
add(diver, BorderLayout.SOUTH);
}//closes constructor
} // Closes class
The files are in C:\divelog
the pics are in C:\divelog\images
the pics are diver.jpg and diveflag.gif -
Hi:
I've changed my database (small db... 4GB data) to go archivelog mode. The problem is that in 5 minutes it generated hundreds of files in the archivelog destionation...
[root@server archivelog]# ls -lht
total 2.2G
-rw-r----- 1 oracle oinstall 9.1M Dez 14 17:20 arch_523640043_1_46517.arc
-rw-r----- 1 oracle oinstall 9.1M Dez 14 17:20 arch_523640043_1_46516.arc
-rw-r----- 1 oracle oinstall 9.1M Dez 14 17:20 arch_523640043_1_46514.arc
and hundreds more...
What's happening here?
BR,
JoaoHi Sape and Tekicora:
No, I am not loading lots of data. And I can guaranteeed that there are no insert or updates on my application at the time I activated the archive log. My redologs are 100MB each... and I have 3 REDO LOGS.
So, this is no surelly normal i guess... This is really strange!
parameters:
fast_start_io_target integer 0
fast_start_mttr_target integer 0
fast_start_parallel_rollback string LOW
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 2
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
log_buffer integer 1048576
log_checkpoint_interval integer 0
log_checkpoints_to_alert boolean FALSE
log_checkpoint_timeout integer 1800
log_file_name_convert string
br,
Joao -
I just bought the Linksys E1000,I have it hooked up to a desktop PC through a cable modem. The problem is when I go to Administration then to my Log, my Incoming log and Secuity log isnt logging anything , no IP's or anything. Ive tried hitting refresh. But both my DHCP Client Log and Outgoing log is listing information and logging. I have Malware Anti Malware and Eset Nod32 AntiVirus installed, I know MBAM blocks malicious Ip's,so im not sure if that has anything to do with it. I also have Windows Firewall turned on. I did try reinstalling the firmware ,but nothing changed . Any help is much appreciated .Thanks.
Strange that it finished the flash rapidly. Can you do the "30-30-30 reset procedure - saw this post by dudztgp " and then do the flash again.
..Just a thought..
Yesterday is history. Tomorrow is mystery. Today is a gift.
Maybe you are looking for
-
How to get system time and date with PHP
Dear Mr.Craig, Thanx a lot. We are running SRM 5.0 (RAMP - Implementation). My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it? Regards, Deva.
-
Photo sharing replacement for mobileme galleries
HI all, I'm sure there are others out there, like me, who built their entire gallery strategy on using Apple's "mobileme galleries," and now you have had to find a replacement for that becuase as we all know....There will be no replacement for Galler
-
HT201412 Phone suddenly has voice speaking commands but commands do't work
I've had my iPhone for almost 2 years. This morning when I tried to use my phone A computerized voice started speaking the commands but the commands don't work. I didn't even know there was a voice function on this phone. I can't seem to do anythi
-
HI, I want to write a program with two classes, and there is a variable that should be shared between these two classes. I don't know how to realize the sharing. Thanks
-
How do I restart my download for a movie again, it just says waiting
How do I restart my download for a movie again, it just says waiting