Log that hows portal is running

I am trying to find a way on unix to clearly identify when the portal is up.
I have tried
std_server0.out - this only tells the j2ee is running
I have tried.
defaulttrace.trc. This comes up with the line
and 99 more ...........
but shows me no more information.
I am looking for what the old console logs in ep5 and 6 used to say.
Any ideas

Hi Jeremy,
You can use the Java Monitor
http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/4d074147c1f06fe10000000a1550b0/content.htm
and
http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/fe074152aff323e10000000a155106/content.htm
Regards,
Ignacio

Similar Messages

When we run depreciation we miss one asset, after that how we can run depre

hi gurus
when we run depreciation we miss one asset, after that how we can run depreciation for that asset

hi
In "AFAB"yes we can do it by selecting the option List Assets and repeat then run the programme you should get the result.
rajan.

How can i run .app executable file

Hi,
While i was searching for my topic on google code, i found one project and i download that.
But its "MyProject.app" with yellow cplored xcode sumbol and i can not run this file.
Does any one know that how can i run this type of file. i want to run this project.
And another question. I want to create executable file from my project like exe on windows. Is there any way to create this type of file????
Thanks.

vavdiyaharesh wrote:
Hey,
When i double click on .app file it quit and show me message like "The application project140 quit unexpectedly"........."
So is there any problem in .app file?
On your machine sure sounds like it.
How can i create exe file and how can i pass -0 to compiler ..iu don;t see any option in xcode for that.....
giove me solution...
I think you'd be better off taking some training, or at least working through some of Apple's tutorials.
http://developer.apple.com/documentation/developertools/conceptual/XcodeQuickTou r/qtintro/chapter_1_section1.html
Thanks.
You're welcome.

How to start/run Rule Author GUI?

hi,
how we can start / run Oracle Rule Author GUI (part of Oracle Business Rules of Oracle AS)?
as iv seen most of documentations n tutorials state only the 'usage' of it n none of those describe that how to start / run Rule author gui,,
Best Regards

hi ,
i did all the tasks specified in this guide,,,but it is not mentioned here that how to restart RULEAUTHOR? and when i tried to start it by :
http://machinename:7777/ruleauthor/
it gives me HTTP 404 Not Found.
plz tell me what to do ?
Best Regards

How can i run the example programme without hardware

Hi,
We are using NI-9233 for our Project. We would like to run the example programme, the NI-9233 getting started(host).vi ... I would like to ask that how can i run the Programme without Hardware.& How shall i get the input signal (simulating signal)?because we would like to test it while we are waiting for the hardware to be delivered .
thanks
Best regards

As Mike indicated , " you can use MAX to simulate some (not all) DAQmx devices. There's a NI-USB-9233 device that you can probably use. Open MAX, then expand "My System", the expand "Devices and Interfaces", then right-click on "NI-DAQmx Devices" and select "Create New NI-DAQmx Device -> NI-DAQmx Simulated Device". Select the device from the list. See the online help for MAX for further help.
If you don't see "NI-DAQmx Devices" in MAX you need to install NI-DAQmx. You can download it from NI here. "
hi,
the link you gave me to download is "NI-DAQmx Devices" ... There is no software to download for Labview 8.2.1. So should i use 8.1 or 8.3 instead of 8.2.1 ? If not, can you tell me the CD no. that includes the "NI-DAQmx Devices" folder of Labview 8.2.1 version? Because we can get the cd from our school's component store. Thank you so much.
Best Regards,
Su

How do I run a database procedure that inserts data into a table from withi

How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
Colin

Hi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian

How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service pack 4?

Hello.
How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service
pack 4?
Is that a supported configuration? any problems / Issues ?
Weblogic Integrator

Why the hell do you want to do that ? ? ?
just run it on 8.1, if you need to get info from the 7.0 server just get it.
8.1 is a whole new framework, what you suggest a hack that is probably not supported.
nerdi
"Integrator" <[email protected]> wrote:
>
Hello.
How do I run a weblogic platform portal 8.1 on a weblogic server 7.0
service
pack 4?
Is that a supported configuration? any problems / Issues ?
Weblogic Integrator

What do I do to straighten out this problem... When I try to access Firefox after having logged out of a previous session I get a msg that Firefox is still running and I have to restart the computer in order to access internet.

What do I do to straighten out this problem: When I try to access Firefox after I've logged out of a previous session I get a msg that Firefox is still running and I have to restart the computer in order to access internet...

All you need to do is wait. While Firefox appears closed, it's not. It doing house cleaning. Cleaning out cookies and cache. How long it takes depends upon how much garbage you have collected.
If you start the Task Manager and open the Process window, you will be able to see when Firefox has finished up and closed down.
If you forced Firefox to close using the task manager, then the house keeping process seems to freeze up.
Also, as you've already found out from the above link, some programs and plugins will prevent Firefox from closing properly. I've found this less common then simply being in a hurry. But you need to also consider it.

How to log exceptions and imp logging info in Portal Service via ILogger?

Hi Experts,
I m trying to use ILogger for my application.
Information about my application:
I have created a Portal Service and exposed it as a Web Service which is deployed as a PAR file on to the SAP J2EE Engine.
I need to use the Logging facility of ILogger in this Portal Service.
I have written the following code in the Init() function of the Portal Service
public void init(IServiceContext serviceContext)
mm_logger = serviceContext.getLogger("com.persistent.pankaj");
I have put the logger.xml in the logger folder of PORTAL-INF
my logger.xml is as follows:
<Server>
<Logger name="testLog" loggerInterface="com.sapportals.portal.prt.logger.ILogger" locationName="com.sap.portal.testLog" pattern="%d # %20t %15s %m #" isActive="true">
<LoggerClass className="com.sapportals.portal.prt.logger.SimpleFileLogger" level="INFO">
<param filename="logs/com.persistent.pankaj.log" append="true">
</param>
</LoggerClass>
</Logger>
</Server>
On deploying my portal service as a web service
I m unable to get the logs.
I even dont know where will i get the log file, means wat is the exact location where i can check my log results
I m a newbie for this
Please help me out
Help will be rewarded n appreciated
-pankaj

Hi Pankaj,
In your init method try this code to create the logger:
ILogger logger = PortalRuntime.getLogger("testLog");
In your logger.xml the logger name was testLog and not com.persistent.pankaj so while creating logger you should use testLog in the above code.
By default all the logs are written to defaultTrace.log files, to check them read this:
Portal Runtime Logs
If you want to log in a seperate logfile then you should set a seperate log destination, which is not recommended on productive systems due to performance problems.
Also read these to know how to set seperate log destinations:
Netweaver Portal Log Configuration & Viewing (Part 3)
Netweaver Portal Log Configuration & Viewing (Part 1)
Netweaver Portal Log Configuration & Viewing (Part 2)
Regards,
Praveen Gudapati

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

After the update I don't know how to close running apps? I recall double clicking the main button then hold one app until they begin a jiggling motion. But that no longer works.

How do close running apps?

You still double tap the home button and the apps are lined up across the screen. Swipe up on the app preview thumbnail - drag it up off of the screen - and that will close the app.

Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

Hi,
first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them - the links I would use: http://helpx.adobe.com/support.html and http://helpx.adobe.com/contact.html.
Hans-Günter

How to know that a form is running in query-only mode

I have a form that can run in query-only mode or non-query-only mode depending on the current user who logs in, and I want to change its apprearance dynamically when it's in different modes (for example, enable or disable buttons). Is there a built-in or system variable from which I know that the form is running in query-only mode or not?
Thanks,
Shu

The global variable solution is what we are using now. I thought there are some unpublished built-in or system variables. In my application, there is a public "menu" form from where hundreds of forms are CALLed with some in query-only mode and some in non-query-only mode depending on the current user role. :PARAMETER.QUERY_ONLY will always be 'NO' because the "menu" form is started in non-query-only mode. But it's good to know about it.
Thank you very much for your replies,
Shu

I keep getting a message saying my protection engine has corrupted and that i should try re-installing live update. What is live update and how do i run it? - be grateful for any help

Hi,
I turn my i mac on and when it has loaded onto the home screen I get a message popping up saying my protection engine has corrupted and that i should try reinstalling live update and my computer will no longer be protected until I do so. Would anyone be able to tell me what live update is and how I would run/reinstall it? - be grateful for any help!!!
Thankyou

It would be a great idea to uninstall Norton - you don't need it and it has a pretty poor reputation for mucking up otherwise healthy Macs.
Have a look at this User Tip from klaus1: https://discussions.apple.com/docs/DOC-2435
To uninstall Norton:
https://support.norton.com/sp/en/us/home/current/solutions/kb20080427024142EN_En dUserProfile_en_us
Edit: To see whether you actually have Norton installed launch Activity Monitor in the Utilities folder. If it's installed you'll likely see some Norton entries there.
Also, in System Preferences>Users & Groups or Accounts, depending on OS)>Login Items, it might be listed.

How to capture the user who has logged into the portal.

Hi,
How do I capture the user who has logged into the portal.
HOw do I retrieve the first name and last name of the logged in username.
Could someone provide me a related link or PDF to work on this.
Thanks,
Suvarna

Hi suvarna,
Check the following code
ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                  IUserFactory usf = UMFactory.getUserFactory();
                  IUser iuser = null;
                  IUserListElement userElement = null;
                  int i = 0;
                  while (rst.hasNext()) {
                        iuser =
                              UMFactory.getUserFactory().getUser(rst.next().toString());
                        String email = iuser.getEmail();
                        String fname = iuser.getFirstName();
                        String lname = iuser.getLastName();
regards
Anil Dichpally

Log that hows portal is running

Similar Messages

Maybe you are looking for