Log & Transfer Error (.mov files) Issue

When I add my SD info in Log & Transfer Window i get the error message "100Canon" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.....
I used a Canon EOS Rebel to get the footage. I understand that FCE does not work with these .mov files without having to be forced to render.
Is there any way that I can transfer these .mov files to avoid having to render? If not can I convert them to another file without loosing quality? Is there any solution to avoid having to render?

You may lose a tiny bit of quality but it won't be noticeable. In Streamclip, you go to +File > Export to Quicktime+ and choose the Apple Intermediate Codec as your compression. Make sure you set a frame rate of 29.97 and audio to Uncompressed Stereo 48kHz. The exported video will be an AIC file in a .mov container.

Similar Messages

Log & transfer error. mts files

I recorded video with panasonic gh2.
I had problem that mts files didn't trasfer.
I had been test record that had no problem. When I do test record, it is only one file.
But this is 31G and 250 cuts. what happen to me?
I want to reduce less data lost.

More information would make things easier. Can you post what Mac you are editing with, how the Mac is set up, which version of Final Cut Pro, and your workflow?

How do I transfer a movie file from my iPad to my MacBook Pro?

I recently accidentally deleted all media files that existed in the iTunes Media folder on my MacBook Pro. I have managed to recover almost every file, the only one I have yet to recover is a movie that was redeemed through iTunes after I purchased it as part of a DVD/Blue-Ray/Digital Copy combo pack. It is no where to be found on my hardrive yet the 'phantom' file still extsts within my iTunes library. After checking all of our family's Apple devices (2 iPhones, 5 iPads, 1 older MacBook, & 1 MacBook Pro) I was delighted to discover the movie still exists on my stepson's iPad Mini! Only now I cannot seem to find a way to 'transfer' this movie file back onto my MacBook Pro. I am refusing to sync or update his iPad Mini in fear that I might loose the only copy of the movie I have left! Can someone please help me transfer this file back to my MacBook Pro? Thanks so much!

This talks about iTunes 10, but it should work the same way in iTunes 11. Transferring purchases for an iDevice to your Mac.
http://support.apple.com/kb/PH2554
It should be File>Devices>Transfer Purchases, I think
You must be using the same Apple ID in iTunes on your Mac that your son is using on the Mini or the movie will not transfer.

How do I transfer a .mov file to my iPad from my Mac?

How do I transfer a .mov file to my iPad from my Mac?

If .mov files are compatible with iPad, you can add your .mov file to iTunes and sync it to your iPad.

S7 event log Protocol Error: Handheld File could not be opened (4004)

Every time I do a hotsync now, I get an error message indicating that two files were not successfully back up: "S7 Event Log" and "EX_New Stories". Both inidcate "Protocol Error: Handheld File could not be opened (4004)." Does anybody know how to fix this?
Post relates to: Centro (Sprint)

No need to complicate the Forum with duplicate posts...
Using the Search function here on the Forum, you'll find many posts that offer solutions to your problem. I searched for "4004", and found many matches.
One like this one may help.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Using Log&Transfer with QuickTime files?

Has anyone tried this? Is it possible? I have been given a drive with .mts files converted to quicktime. The file names are utterly meaningless. Example: I have 30 QT's with duplicate names in different folders, from different shooting days. Obviously I need to relog everything, give it scene/take info. Wondering if I can use Log & Transfer to log the QT files?
The footage was shot 1080p, should I just bring in the .mts files thru log&transfer, ProRes?
Suggestions and guidance very much appreciated.

Thank you for your reply -
The .mov files are Apple ProRes 422(HQ).
As mentioned earlier I also have the original .mts files. Everything was shot AVCHD 1080p.
Short of slogging through thousands of incorrectly labeled .mov files I was thinking of just starting fresh with Log & Capture of the original .mts files.
One of the reasons I'm thinking of working with the .mts files and Log & Capture is that I can rename the clips while retaining the metadata of the original .mts files. My understanding is that this will preserve the link between the 'work print' and the camera original 'negative' so to speak. It will also afford me the easy ability to work in ProRes proxy and uprez later, tho I assume I can bring in the 'mov as proxy and do the same thing?
I've been known to be totally wrong and thus, I am here seeking wisdom.

Final Cut Express Log & Transfer Error No Data

Hello all, after hours pouring through the threads with similar questions, I have had no luck. I have been using FCE for nearly two years, and have never seen this error message "No Data"
Last night, I was in the middle of transferring clips from my Sony hdr xr520v using my MacBook Pro capturing on my external HD with over 200GB available. The transfer was going smoothly, but VERY slow - slower than I remember it ever taking. I thought I would be a bright one and switch from my Firewire port to my USB (I had been capturing via USB for about 6 months when my logic board fried and external drive was not visible via Firewire only USB) In any event, I'm boring you with the details so you can replicate the scenario. The transfer was working with Firewire but I switched back to USB illogical I know since Firewire is faster than USB, but I was going with prior 6months experience. When I connected the HD with the USB, all of a sudden I got the No Data error message. I promptly switched back to Firewire, but I am still getting the message! What have I done?
I checked my settings - Log & Transfer is set to AVHD Plug in and Plain Stereo. Both audio and video are checked, FCE is set to HDV- AIC 1080i50.
I can not log & transfer ANY clips into FCE (not even the ones already imported last night) I can, however import all into iMovie (which I know doesn't care about all the stuff FCE cares about but helped me eliminate the possibility of corrupt clips).
ANY help would be MUCH appreciated

I thought you had to use USB 2.0 to log and transfer AVCHD . . . . definitely not Firewire?
I suggest you trash the preferences as detailed in the link below and start again with the correct Easy Setup and using USB 2.0.
http://www.fcpbook.com/Misc1.html

Trying to transfer a movie file from my ipod to my pc

I am trying to put a movie file I have saved on my ipod classic and transfer it over to my pc. Now the ipod is set up to work with my macbook so when I hook it up to the pc it wants me to reformat it. I am using the ipod as an external storage so the movie file does not come up in my itunes. I do this sometimes just to transfer large files from my macbook to my wifes macbook pro. This is the first time I am trying to use it with a pc. If I reformat the ipod for the pc I am assuming I will lose all of my music that is on the ipod right? Thanks for any help to can give me.

Hi Bob,
Thanks for your reply.
The movie file is stored in a folder inside of data, when i try and delete either by dragging to trash or clicking move to trash it comes up with (The operation can’t be completed because you don’t have permission to access some of the items.).
I am just treating this file the same as anything else in finder, which is generally what i have always done.
Stelios

Attempting to transfer large mov file from iphone to PC

I've got a large mov file I'm trying to transfer to my PC. I have 57 GB of free space on my PC, yet I'm told there's "not enough storage" to complete this operation. Any ideas? Thanks for your advice.

Via computer iTunes is the only way.

Log & Transfer Error...

Using a Sony HXR camera (AVCHD) and FCE 4.0.
When adding clips to the Log & Transfer window, I get a spinning wheel, then a red hexagon with an exclamation mark in it. The continual error is "no data", no matter how many times I try.
I have been looking through this and other forums for hours and have tried all the suggestions... specified Apple Intermediate Codec, selected "plain stereo" etc. etc.
Would appreciate any suggestions as this is seriously frustrating and I need to finish a project... thanks.

No worries.
The updates adds a few Easy Setups that most likely your camera employs.
Al

IPad and .mov file issue

I am trying to play some .mov files on my iPad. I was able to drag and drop one of the files from my hard drive to the Movies folder in iTunes. The drag and drop worked and the file plays fine. I then go on to do the second file but get an error message when I try to drop it into iTunes: "[file name.mov] was not copied to the iPad '[iPad name]' because it cannot be played on this iPad." Both files are .mov. Why am I able to drag and drop one file into iTunes but not the other? (I am able to drag and drop it into "Movies" in my regular iTunes account, just not to the iPad device).

Not all mov videos are friendly to iPad, but only H.264 / MPEG-4 encoding video in mov format is compatible with iPad. And the most important step is to convert MOV to the right MOV (mpeg-4), mov (h.264) for ipad. I haven't tried it, but this free software for Mac/Windows may convert it.
http://www.mirovideoconverter.com/
 Cheers, Tom

Canon 1DX mov file issues

I cannot use MOV files from my 1DX in Premiere CS6. The files play audio but the video is un-playable. I am on a Macbook Retina with Mountain Lion.
The files play fine in Lightroom.
Sean

That's strange because CUDA doesn't affect simple playback. If turning that off solved the issue, then something unusual is going on with your system.

I am trying to transfer a .mov file to my new iPad Air

How do I get a home movie (a .mov file) from my desktop to my iPad? I may need a converter...??

I can think of Three quick ways
1) Buy this $30 dongle.
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit
Take a 3 photos with a camera using a clean SD Card.   Take the SD card out of your camera and into an adapter on your computer. Put the MOV file in the DCIM folder of the SD card. Now put the SD card into your iPad using the $30 dongle.   Go to the photos app, then import. You should see 3 photos and the MOV on your ipad.
2) If you have a mac get the MOV imported into iPhoto.   Then put the MOV into an album in iPhoto. Connect your ipad and mac with a usb cord.   Now in iTunes go deep into the settings to sync that album. Press SYNC.   Disconnect the ipad from the mac, and you should see the MOV on the ipad in your photos or video APP.   (iPhoto is only made for the mac)
3) If the MOV file is small, under 25mb, most email programs will let you email the MOV. Send on your desktop, then go to the ipad, check email, and then download.
footnotes on DCIM folder
http://www.techhive.com/article/217111/dcim_folder.html

How Can i Transfer dvd movie files using quicktime pro

I bought quicktime pro under the impression that you can convert dvd movie files into ipod format if anybody has an answer please respond!!!!????

QuickTime Pro can't even view DVD formats without some help.
DVD's are "protected" with CSS software encryption and can't be viewed with the Pro version of QT.
Find some third party software (hundreds of apps) by looking and searching through the iPod Discussions pages.

File system task - Move file issue, skip the current log file thats open by another process - IIS logs

Hi,
I have created a package to move IIS log files from their source directory to another directory called processing. However, when the package tries to move the current log file it errors because the file is in use by another process (by IIS as its still writing
to it). I would like the package to just ignore the "in-use" file and process the rest and show the package completing successfully. The file in use will be rolled by IIS at midnight and the file will be picked up by the next package run.
However, when the file is rolled and becomes free a new log file is created which will be marked as "in-use"...... which should be ignored at the next run.
Is there some way that I can tell the file system task to ignore in use files or add an event handler to do the same sort of thing?
Any assistance is appreciated

Hi Arthur,
Thank you for your reply.
I have resolved the issue with the following example:
http://www.timmitchell.net/post/2010/08/23/ssis-conditional-file-processing-in-a-foreach-loop/
What I realised was that I needed to just ignore the current log file which gets created daily, so using the above example (and changing the last written date to created date) I am able to ignore/skip the log thats in use.
Adam

Log & Transfer Error (.mov files) Issue

Similar Messages

Maybe you are looking for