Log & Transfer, one clip not transferring

I have successfully been able to "Log and Transfer," my videos directing into FCP 6.0.6. The three clips are not transferring. It is taking hours and it still only looks like 1/4 of it is transferred. This (3 un-transferable) clips range from around 44 minutes and 1 hour. There is 11 clips I would like to transfer over. I successfully transferred 8 of those 11 clips. It is patience I need, a whole night for it transfer my 00:44:37;04 clip?

Did all the other shots on the card come in to fcp?
It may be that the shot is corrupted. The only thing I can think of is to try moving the "card" to your startup drive.
You might go on to the website of your camera's manufacturer and see if there's any help to be found in their support area. Sometime's cameras come with software which is often pc only. If you have access to a pc, you might try the software and see if you have any more luck. Once you've got the file onto a pc, you may be able to convert it to a fcp friendly format.
Good Luck

Similar Messages

Sony NX5U Log & Transfer Long Clips Issue

I've used FCP Studio for a very long time, and have been using the Sony NX5U camcorder for 3 years. Never had any problems once FCP 7.0.3 came out. But about a year and a half ago, I started noticing long clips would crash FCP 7 just seconds before the end of the upload. The max length seems to vary between 65 minutes and 75 minutes. I could swear I had earlier projects with longer clips and no problem but couldn't track any down. Yesterday I uploaded a 74 minute clip no problem, but a 93 minute clip crashed. Today a 68 minute clip crashed the program. Never had a problem with clips under 60 minutes.
The upload indicator bar gets within 1/32 of an inch from the end when the crash happens.
My work-around has been to break the clip into clips shorter than 60 minutes. I overlap the time code by about 1 second and then put it all together on the timeline.
I started looking at the forum today because in the last few days I recorded two separate projects each with multiple long rolls of either music performances or speeches. Most are about 90 minutes, two as long as 180 minutes. It's a hassle breaking these clips into shorter pieces so today I started reviewing the forum to see if anyone else has run into this.
There doesn't seem to be a lot posting about it, and the the ones that do post seem to have different "crash" times ... I saw one having a similar problem with clips 45 minutes in length, for example. The only suggestions offered are to use programs like Clip Wrap.
Is this really a restriction with Sony AVCHD files and Log & Transfer in FCP 7? I tried a few third-party solutions but they seemed cumbersome. When FCP 7 Load & Transfer works, it works great. It's just these 65+ minute clips that are the problem.
I just doubleclicked on a 123 minute clip in the AVCHD Package in the Finder, and it opened fine in QuickTime Player X. I can export it out of there. The "Movie" export did it very quickly ... less than 20 minutes ... but it ends up as an H.264 file so I would need to render in FCP 7 or deal with it in Compressor to get it to ProRes. But it does give me one cohesive clip.
What other experiences have users had trying to Load & Transfer long Sony AVCHD clips into FCP 7?
I'm OS 10.8.4 on my iMac and 7.0.3 in FCP. I run into the same length restrictions running FCP 7 on a new MacBook Pro. Thanks in advance for any suggestions or advice.

I've never worked with clips that long but have noticed a problem skimming longer clips in Log + Transfer to set in / out markers.
My advice would be to use Clipwrap. You can either re-wrap the file or transcode it to PR.
Their gig is file conversion so if there's a problem they'll eventually fix it.
Hope that helps.
g

Importing From Min-DV Camcorder: Sound on One Clip, not the Other

Hello,
Taped a live presentation on Canon HV 20. Part of the way through, briefly stopped then re-started camera. After importing to iMovie 6, the 16 minute clip 'pre-break' has no sound on playback, although it had sound in 'monitor mode' and on the tape. The 22 minute post break footage plays sound just fine.
Thanks,
DoubleJD2

Here you go. I don't know exactly what I did to make the timeline clips disappear, but I was trying to find the effects clip and that's how it happened. I know I used the relink project files option to do so, and after that I couldn't find anything. I've checked everything and everywhere including trash, but nada!

Final Cut Express Log & Transfer Error No Data

Hello all, after hours pouring through the threads with similar questions, I have had no luck. I have been using FCE for nearly two years, and have never seen this error message "No Data"
Last night, I was in the middle of transferring clips from my Sony hdr xr520v using my MacBook Pro capturing on my external HD with over 200GB available. The transfer was going smoothly, but VERY slow - slower than I remember it ever taking. I thought I would be a bright one and switch from my Firewire port to my USB (I had been capturing via USB for about 6 months when my logic board fried and external drive was not visible via Firewire only USB) In any event, I'm boring you with the details so you can replicate the scenario. The transfer was working with Firewire but I switched back to USB illogical I know since Firewire is faster than USB, but I was going with prior 6months experience. When I connected the HD with the USB, all of a sudden I got the No Data error message. I promptly switched back to Firewire, but I am still getting the message! What have I done?
I checked my settings - Log & Transfer is set to AVHD Plug in and Plain Stereo. Both audio and video are checked, FCE is set to HDV- AIC 1080i50.
I can not log & transfer ANY clips into FCE (not even the ones already imported last night) I can, however import all into iMovie (which I know doesn't care about all the stuff FCE cares about but helped me eliminate the possibility of corrupt clips).
ANY help would be MUCH appreciated

I thought you had to use USB 2.0 to log and transfer AVCHD . . . . definitely not Firewire?
I suggest you trash the preferences as detailed in the link below and start again with the correct Easy Setup and using USB 2.0.
http://www.fcpbook.com/Misc1.html

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

I upgraded from iPhone 4 to iPhone 5 and all of my apps EXCEPT one transferred over. Why did this one app not transfer over? Thank you

I upgraded from iPhone 4 to iPhone 5 and all of my apps EXCEPT one transferred over. Why did this one app not transfer over? Thank you

The app is compatible with iOS6...any other reason why this might have happened? Thank you

How do I transfer EDITED clips from one IMovie to another

I have tried to transfer edited clips (with original sound) from one IMovie to another. However, the system transfered the original clips instead of the edited clips.
Does anyone have any tips on how to transfer the edited clips only and not the original clips.
osx 10.3.9 and Imovie 5.0.2

That will copy the original, imported material, not
the edited version. I.e. if I trim an imported clip,
the .mov file will still be the un-trimmed,
full-length clip.
Not the movie Lennart means. The movie Lennart refers to — called the Timeline Movie.mov and located in the Cache folder inside the project — plays the edited Timeline of Project A. (It's a reference movie containing pointers to the audio and video files in the Media folder.) When that Timeline Movie is imported to Project B, it delivers all the edited video and audio of Project A as a single clip to Project B. (He's not referring to the video and audio files in the Media folder, which I think you mean.)
taronger, if all you want is a single clip, another way is to select the clip in the iMovie Timeline and export it to a Full Quality movie. Be sure to turn on the checkbox "Share selected clips only" in the export dialog window. Later, import that exported movie to another project.
I did some trials and found out that transfering edited clips (not original clips) can be done by selecting several consecutive clips in the original movie, and using the copy command. It is then possible to go to the new movie and use the paste command to transfer the edited clips.
Yes, that delivers the clips, but it doesn't deliver shortened clips. It delivers the entire source file of the clip. So if Clip 2 is 5 seconds long but its source file is 3 minutes long you get the entire 3 minute source file.
It's sometimes easiest to export the clips you want from Project A back to the camera, then re-import them to Project B. That accomplishes everything you want, delivering the edited material trimmed to the shortest length possible.
Note that the clips must stand shoulder-to-shoulder on the Timeline and the "Share selected clips only" checkbox must be checked. (Some versions of iMovie fail to stop the export to the camera at the end of the last clip. You may have to stop it manually.)
Karl

HT1415 You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to an

You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
This is a confusing statement. Can really move the rental between devices or not???

If you originally downloaded it to a computer, yes. If you originally downloaded it to an iOS device, probably not; if you want to try anyway, use the Transfer Purchases function in iTunes.
(85739)

How do I transfer a clip from one project to another?

How do I transfer a clip from one project to another?
[Title edited to remove personal information... Mod]
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]

Gene
Thanks for the reply.
For now assuming that you are using Premiere Elements 11, 12/12.1, or 13/13.1 on Windows 7, 8, or 8.1 64 bit....
I am not sure that Left and Right channel audio editing is the answer to your DVD echo issue, but the opportunities for audio channel editing in Premiere Elements would include (before burn to)
1. Audio Mixer - Balance.
2. fx Effects/Audio Effects
Please refer to https://helpx.adobe.com/premiere-elements/using/effects-reference.html#audio_effects
for explanations of the Audio Effects.....
Balance
Channel Volume
Left Fill, Right Fill
Invert
Swap Channels
And, there is the free audio editor, Audacity Audacity: Free Audio Editor and Recorder for channel editing.
Do you hear the echo before the burn to disc?
Is any of the Timeline video content from your cell phone? If so, did you have any issues with a variable frame rate when you were preparing the video in Edit area for burn to in Publish+Share?
What audio effects, if any, did you apply to the Timeline audio content prior to burn to?
Please consider.
ATR

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

All clips not showing up in logging bin

the setup:
MacPro 2 x 2.66 GHz Dual-Core Intel Xeon
4GB RAM
OS 10.4.10
Fibre Channel to 2 Media Vaults
FCP 6.0.1
The problem:
We shoot HVX200 to P2 DVCPROHD 720p.
When doing the log & transfer to ingest,
only a few clips out of several are showing up in my bin.
The QTs are being created and show up as captured media on the Media Vault, but only a random few show up in my bin in FCP.
I always set logging bin, I've trashed prefs, and repaired permissions. The workaround is to simply import the clips after they've been converted to QT, but it's a real pain.
Anyone seen this before and have a solution?
Thanks in advance.

I have a similar problem...but I don't get the first few minutes of video. On my iMac screen, I get that the camera is recognized and blue screen. It tells me onscreen when I am "playing" or "seeking forward" etc., but when I try to "import" though, the "import" button no longer works (it worked 1/2 hour before this). I've plugged and unplugged the firewire cords, turned off the camera, checked the tape, etc. To me, it seems to be a software issue. I just tried it on our Intel Macbook Pro and I have no problem importing the video.
The problem seemed to happen after I imported about 8 minutes of video this morning and then when I stopped it gave me a message I've never seen before (something about "organizing video clips") which like the "letterboxing" message seemed to take forever. Under a time crunch, I attempted to quit iMovie during this organizing process. It didn't happen right away, so I went on to do something else. When I returned, it gave me the options of quitting, saving or canceling. I opted to cancel and continue to import. At that point, however, the import button no longer worked.
I work at a university, so I don't have the install disks myself and wonder if anyone else has had this problem and been able to work around it without reinstalling the software. (I can contact our IT people, but it's a real pain and very time consuming to get them here to reinstall...plus, they are not "Mac people" so they like to give me a lot of c.r.a.p. about how PCs don't have this or that issue...sigh).
Thanks!
Sally

Archive logs are not transferred to STDBY database

Hi,
I have create a STDBY database (I am running the release 9.2.0.7.0).
I see that the archivelogs are not correctly transferred into STDBY server.
From Primary alert log, I see the following error:
ARC1: Evaluating archive log 1 thread 1 sequence 16734
ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC1: Destination LOG_ARCHIVE_DEST_2 archival not expedited
ARC1: Beginning to archive log 1 thread 1 sequence 16734
Creating archive destination LOG_ARCHIVE_DEST_1: '/backup/archivelogs/log1_16734.arc'
ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
Invoking non-expedited destination LOG_ARCHIVE_DEST_2 thread 1 sequence 16734 host STDBY_PROD
ARC1: Completed archiving log 1 thread 1 sequence 16734
Thu Nov 17 14:54:42 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 14:54:42 2011
ARC0: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
Thu Nov 17 14:54:42 2011
ORACLE Instance PROD - Archival Error. Archiver continuing.
ARCH: Connecting to console port...
Thu Nov 17 14:54:42 2011
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thu Nov 17 14:54:42 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-16055: FAL request rejected
ARC0: Begin FAL archive (thread 1 sequence 16483 destination STDBY_PROD)
Creating archive destination LOG_ARCHIVE_DEST_2: 'STDBY_PROD'
Thu Nov 17 15:05:44 2011
LGWR: I/O error 3114 archiving log 2 to 'STDBY_PROD'
Thu Nov 17 15:05:44 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_lgwr_5265.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 15:10:08 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 15:10:08 2011
ARC0: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
Thu Nov 17 15:10:08 2011
ORACLE Instance PROD - Archival Error. Archiver continuing.
ARCH: Connecting to console port...
Thu Nov 17 15:10:08 2011
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thu Nov 17 15:10:08 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-16055: FAL request rejected
I see that both archiving destinations are VALID:
SQL> select dest_id, dest_name, status from v$archive_dest_status where status != 'INACTIVE';
DEST_ID ---------- DEST_NAME -------------------------------------------------------------------------------- STATUS
1 LOG_ARCHIVE_DEST_1 VALID
2 LOG_ARCHIVE_DEST_2 VALID
SQL>
TNSPING works properly in both directions, e.g. from PROD -> STDBY:
$tnsping STDBY_PROD
TNS Ping Utility for Linux: Version 9.2.0.7.0 - Production on 17-NOV-2011 16:56:40
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
/mnt/orclEBS/oracle/proddb/9.2.0/network/admin/PROD_ebslive/sqlnet_ifile.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=EBSSTDBY) (PORT=1521)) (CONNECT_DATA=(SID=PROD)))
OK (10 msec)
Please help me to solve this issue.
Thank you.

A few notes :
Troubleshooting Tips For Dataguard Switchover (9i and 10gR1) [ID 298986.1]
Although it is about Switchover, it does mandate a password file exclusive. If the switchover requires the password file, shouldn't ARCH shipping require it ?
Step By Step Guide To Create Physical Standby Database Using RMAN [ID 469493.1]
also covers 9i with specific mentions of 9i differences from 10g. Passwordfile is not mentioned as different in 9i from 10g.
Data Guard 9i - Net8 Configuration for a 2-node database environment. [ID 175122.1
has log_archive_dest_2='SERVICE=NODE2STDBY.ACME.COM' so it connects to the service
*However* the document "Introduction to Oracle 9i Data Guard Manager" from
Data Guard 9i Introduction to Data Guard Manager GUI [ID 150217.1]
page 59 has this : "The creation process will attempt to create a remote login password file for the standby database to
enable remote connections to the database. (Note: A remote login password file is not necessary for
Data Guard operation; it is only needed to allow remote connections to the database from clients,
such as other Enterprise Manager tools.)"
Similarly the section "3.2.6 Set Initialization Parameters on a Physical Standby Database"
in the 9i DataGuard manual at http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm#62941
only has
remote_archive_enable=TRUE
(this is an instance parameter)
Similarly the section "5.8.2.1 Primary Database Initialization Parameters"
at http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/log_transport.htm#1067609
explains
The last parameter, REMOTE_ARCHIVE_ENABLE=SEND, allows the primary database to send redo data to the standby database, but prevents the primary database from receiving redo data from another system.
with REMOTE_ARCHIVE_ENABLE=RECEIVE on the Standby
to Receive and archive the incoming redo data from the primary database, but only while the database is running in the standby role
So, I guess that REMOTE_ARCHIVE_ENABLE is the important one. Not REMOTE_LOGIN_PASSWORDFILE.
In 9i : http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1174.htm#1023087
In 10g it is deprecated : http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams176.htm#sthref541 so that LOG_ARCHIVE_CONFIG is used.
(and no longer appears in the 11.2 Reference)
Hemant K Chitale

Log & transfer crashes with a big amount of clips

Hi everybody,
I'm converting some 5D footage with log & transfer to proresLT.
I was plannig to have this done during the night but when i'm putting a big amount of clips (I have a looot of clips !) fcp crashes.
Are you aware of somethng like that ?
Thanks

It crashes after adding (adding, not converting) 300 clips approximatively.
Sometimes more, sometimes less.
I have 7.0.2 version.
I'm using the plugin, yes.
I have a 3x1To RAID1 internal SATA (spinpoint F1)
Message was edited by: chle

When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this?? Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there? Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

"clips queued-idle" error using log&transfer in FCP7

Hi, I shoot HDV on a Sony Z5 and now want to use a Sony memory recording unit (HVR-MRC1) instead of tapes.
Today I ran some tests and the first time all went well: I connected the HVR-MRC1 with a firewire cable, opened log&transfer in FCP 7 and no problem importing all the files (after downloading a plugin).
But then I deleted all the files and recorded some new clips. Once I tried to import those in FCP, using log & transfer I could only import 7 of the 9 clips. Of the 2 clips it didn't want to import it said "clips queued - idle".
Also, I realised that none of the clips I shot could be previewed and I couldn'y choose an in- and outpoint before importing. I could only import the whole clip.
I would be extremely grateful if someone could help me with this. I'm looking forward to working tapeless, but I need to be 100% sure that I'll have access to all my footage.
Many thanks in advance!

First thing, I always copy the material to a local hard drive before doing the log and transfer. Make sure you copy the containing folder from the camera. If you change the folder structure, fcp will not be able to access the material.
What settings did you shoot with. FCP is not compatible with certain formats. If you have access to Premiere, you may be able to convert the files to an fcp friendly format.
Good luck.

Log & Transfer, one clip not transferring

Similar Messages

Maybe you are looking for