Log & transfer won't capture all of my clip
When using the Log & Transfer tool with P2 data, it seems to be chopping approximately 2-3 seconds off the end of each clip. Any thoughts? All of the data in the clip shows during playback within the log & transfer window, but when you add it to the Queue it seems to chop off the last 2-3 seconds. If I manually set in points and out points for the last 3 seconds it will bring in the correct data, so the information is there, it just won't bring in the whole clip if I do a simple add clip to queue.
If you have iTunes open and click on Library then at the bottom of the window it should tell you how big your library is.
Is that bigger than what will fit on your nano?
Regards,
Colin R.
Similar Messages
-
9550 storm won't capture all contact info when synced.
My 9550 storm won't capture all my contacts information when it is synced with my contact manager (Agent Office). It misses cell and work phone numbers? Any help is appreciated
My 9550 storm won't capture all my contacts information when it is synced with my contact manager (Agent Office). It misses cell and work phone numbers? Any help is appreciated
-
FCE log & transfer won't recognise DSLR
Hi,
I have a problem where for some reason log & transfer on FCE won't recognise my camera, I have a Canon 60D (DSLR). I have tried putting the SD card straight into the computer & also by plugging the camera into the computer via cord.
However I am still able to import footage, I import from the SD card into iPhoto, go onto Final Cut & import. Yet for some reason when any footage, picture or text is imported to Final Cut Express, the footage is always degraded, that's why I thought log & transfer would be useful. If anyone could help that would be great.
Thanks.
CamThis first one is from the browser:
Name MVI_7136.MOV
Type Clip
Creator QuickTime Player
Source Macintosh HD:Users:Cameron:Desktop...
Offline -
Size 1.1 GB
Last Modified -
Tracks 1V, 2A
Vid Rate 23.98 fps
Frame Size 1920 x 1080
Compressor H.264
Date Rate 5.6 MB/sec
Pixel Aspect Square
Anamorphic -
Field Dominance None
Alpha None/Ignore
Reverse Alpha -
Composite Normal
Audio 1 Stereo
Aud Rate 48.0 KHz
Aud Format 16-bit Integer
This is the same clip but dragged into the sequence timeline, this was the only difference:
Vid Rate 29.97 fps
Frame Size 720 x 480
Thanks for your help, really appreciate it. -
Log & transfer crashes with a big amount of clips
Hi everybody,
I'm converting some 5D footage with log & transfer to proresLT.
I was plannig to have this done during the night but when i'm putting a big amount of clips (I have a looot of clips !) fcp crashes.
Are you aware of somethng like that ?
ThanksIt crashes after adding (adding, not converting) 300 clips approximatively.
Sometimes more, sometimes less.
I have 7.0.2 version.
I'm using the plugin, yes.
I have a 3x1To RAID1 internal SATA (spinpoint F1)
Message was edited by: chle -
Does anyone know why Log & Transfer in Final Cut Express is cutting clips short?
I am using Final Cut Express 4.0.1. For some reason, Log & Transfer in Final Cut Express is cutting short my clips. It's only a few seconds on each clip, and I've noticed it cuts off more the larger the clip is. However, I does not appear to cap my clip length or size, which means it is not due to some maximum size import setting.
Any help here would be greatly appreciated, as this is really frustrating!
Thanks!Hi Cade,
SD card readers should work fine to Log and Transfer the footage in FCE, as long as the SD card stores the full file directory. -
Log and Transfer won't capture entire clip...
Hi there,
I'm trying to log and capture clips in FCP7 from and HVX200.
For some reason it doesn't capture the entire clip...the end gets cut off. I can see it in the log and transfer window, but when I transfer the clips, they become truncated.
Has anyone ever had this problem?
thanks!Go into the Log and Transfer prefs...that little sprocket looking drop down menu. Choose PREFERENCES. Uncheck "REMOVE PULLDOWN."
Try again. -
Log & Transfer of Canon HF 11: error message
Hi guys,
I just got a new canon HF 11 (basically the same as the HF 10) and i tried to import footage using Log & Transfer but every time I click "add clip to queue" it spins a grey icon for a few seconds which then turns to a red circle with an exclamation mark inside and says "Error: No Data". I have tried giving the clip an in and out mark but this doesn't help.
Any ideas,
ThanksI have had a similar problem with my Canon HG21 which has both hard disk and 32GB flash drive. My method is to copy files from the Hard Disk to the flash drive and then place the flash drive into a card reader. I was able to see FCE downloading in log and transfer for a second or two and then it went into an idle mode and never downloaded the file.
My solution was to delete ALL from from the flash drive followed by copying the videos and stills from the hard disk onto the clean flash drive. I realize you don't have the luxury of the hard disk, but perhaps you can extract the files using the Voltiac tool to clone the Canon structure from the camera and see if log and transfer will work directly from your hard disk on the Mac. -
Random crashes when doing routine editing, then log & transfer
I have been experiencing crashes when performing simple editing then returning to Log & Transfer to pull in more footage into the project. I did a permissions repair which seemed to work for a short time - but now it is crashing again. I also followed Shane's advice to disable the Remove Advanced Pulldown and Multiple Frames setting in the Log & Transfer preferences. I have a new MacBook Pro 2.66 ghz and new Final Cut Studio with Final Cut Pro 7.
Here is a portion of the error log - this is basically the same error when the crash occurs:
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000ffffffff
Crashed Thread: 0
Thread 0 Crashed:
0 com.apple.FinalCutPro 0x0015459e DispatchMultitouchGestureCommand(OpaqueEventRef*, long, unsigned char) + 500
1 com.apple.FinalCutPro 0x0015a713 DoEvent(OpaqueEventRef*, KGDictInt*) + 8309
2 com.apple.FinalCutPro 0x00414a21 Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 67
3 com.apple.HIToolbox 0x942bc13d DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
4 com.apple.HIToolbox 0x942bb57b SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
5 com.apple.HIToolbox 0x942d7ecc SendEventToEventTarget + 52
6 com.apple.HIToolbox 0x942ea603 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 2579
7 com.apple.HIToolbox 0x942bc4f6 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2134
8 com.apple.HIToolbox 0x942bb57b SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
9 com.apple.HIToolbox 0x942d7ecc SendEventToEventTarget + 52
10 com.apple.HIToolbox 0x94344a6c ToolboxEventDispatcher + 86
11 com.apple.HIToolbox 0x943412c2 RunApplicationEventLoop + 222
12 com.apple.FinalCutPro 0x0015464f KGMainEvent(void*) + 51
13 com.apple.FinalCutPro 0x002c1aa8 main + 54
14 com.apple.FinalCutPro 0x00003a6b _start + 209
15 com.apple.FinalCutPro 0x00003999 start + 41Update - after completing some editing today, it appears the crashes are only occurring whenever I am working with Log & Transfer - especially when I am previewing the clip, marking in/out, and also when I am scrolling through the list of clips.
I appreciate and help. -
Log & Transfer or Log & Capture?
At College we're using Final Cut Pro 7, I've never used it before, I've only used Final Cut Express 4.
They're very similar, so there's little more to learn (I used FCE4 for a while, until I moved to Premiere Pro; I understand Final Cut decently well), but FCE4 didn't have the Log & Capture option of FCP7, so I was using Log & Transfer.
About 2 weeks ago we set up a folder for ourselves on the computers, there's only one MiniDV tape per group, so only one person was able to import the video. Our technician told us how to set it up, but told us to use Log & Capture. I'm not sure if the person importing it pressed a button by accident, but it ended up in 1 file. I want to know if Log & Transfer will seperate each take, or if there's a button to seperate each take using Log & Capture...there's no way the College is going to get me to edit with a single file!
I will ask my teacher about this next time, but for now I'd like to know why it was just one file and if Log & Transfer will seperate them. I don't have FCP7 with me (Nor FCE4 either) so I can't test it. I'll probably be doing it tomorrow.Log and Capture is the tool to capture from TAPE.
Log and Transfer is the tool to capture from TAPELESS MEDIA, like P2, Compact Flash, SD cards.
Unless you log the tape first...break up the tape into chunks. This is something Final Cut Express didn't do. Final Cut Pro allows you to watch the tape, make in and out marks, make clips that you capture later. So you only capture what you want, and you can break the tape up by scene and take, or by subject matter. So you can log all the clips first, then Batch Capture. Look this up in the manual, it's all laid out.
Now, why won't the college let you edit with a single file? That makes no sense. YOu can also make SUBCLIPS of that single file. Mark IN and OUT on the file, then Make Subclip (CMD-U). name those what you want. they will be individual clips, but they all point to the single file. -
Configure log file transfer to downstream capture daabase!
Dear all,
I am setting up bidirectional replication among 2 database server that are Linux based and oracle 11gR1 is the database.
I am following the document Oracle Streams Administrator Guide, Have completed all the pre-configuration tasks but I have confusion with this step where we have to configure log file transfer to downstream capture database.
I am unable to understand this from the documentation.
I mean how do I configure Oracle Net so that the source database can communicate with each other in bi-directional replication?
Configure authentication at both databases to support the transfer of redo data? How can I do this?
Third thing is the paramter setting that obviously i can do
Kindly help me through this step.
Regards, Imranand what about this:
Configure authentication at both databases to support the transfer of redo data?
Thanks, ImranFor communication between the two databases, you create streams administrator at both the databases. The strmadmin talk to each other.
Regards,
S.K. -
AVCHD Log & Transfer Captures First Half of Clip
I am using Log and Transfer in FCE 4 to capture AVCHD Lite files from my Panasonic DMC-ZS7. It brings in all of the clips, but only the 1st 1/2 of the clip. In other words, a 2 minute video clip results in a 1 minute clip imported. Ideas?
BTW, the same clips import perfectly into iMovie.Tom, thanks for the information. I understand what you are saying from the technical point of view (which is apparently Apple's point of view too), but from a MARKETING perspective, as a consumer, it is annoying that I have to bring the AVCHD Lite files into iMovie, then import those files into FCE. Whatever iMovie is doing to convert those files into usable FCE files, FCE should be able to do on its own.
-
Log & Transfer Captures Every Other Clip
Mac OS 10.6.7
FCP 6.0.6
Trying to Log & Transfer AVCHD footage from a SDXC card. When I batch "Add the Selection to Queue", the status bar goes through the process as if it was capturing all the clips. However, only every other clip shows up in the FCP bin and on the Media Drive.
Would appreciate any help as in the middle of production and need to off load some video so I can reformat for more shooting.
I shot the footage on a Panasonic AG-AF100 (5). Log and Transfer worked beautifully the first several imports. Just noticed this yesterday for the first time.
thanks,Did you ever reprt this as a possible bug?
You should use the "Feedback" page : http://www.apple.com/feedback/finalcutpro.html
or better still, the Radar Bug reporting page (preferebale because it affords you some degree of feedback from Apple on the status of the bug investigaion, but you'll need to create free developer account to use the system) : https://bugreport.apple.com/ -
How to capture all queries in a log file
I need a way to capture all queries fired by all my 200+ DAO java objects easily
in a log file easy debugging purpose.
Any thoughts?I don't know, I always suppress the html output since the
html it generates isn't W3C-valid in any context I'm designing. I
use swfobject for my flash files -- thanks for the idea, though!
Does it enumerate all URLs that are embedded in a flash file's
actionscript? That seems like it can get rather data-heavy? -
AVCHD - optimizing "first cut" from all those "log&transfer" files
I am sure this is a very simple question.
When I log and transfer a 32GB card into FCP, evidently I find myself with a myriad a clips of various sizes. With tape, for comparison purposes, I would likely have 1 or 2 large clips, for instance 60min tapes I usually would divide into two 30min clips.
So, in the case of tape then my "first cut" would simply consist in viewing those clips and cut into my sequence, easy enough.
However now, with all those clips in the AVCHD world, it's a bit of a nightmare. What do you guys do ? I guess it's a matter of merging all those clips, but I am just not sure how to do that in an efficient, intelligent way.
Thx !Hi -
While I would use Jim's method of viewing and editing from the individual clips, I do know some people that use the following method -
Once you have Log and Transferred all your clips to your browser, select all the source clips in your browser, and drag them to the timeline. Name this sequence "all clips" Now you have a timeline that will allow you to play through all your footage, in order, in one continuous viewing.
Then create a second timeline that will be the actual edit, name it "edit" and open it. Now you will have two timelines open. Click on the tab for the "all clips" timeline, play the timeline with all the content, and when you come to a scene you want to add to your "edit" timeline, type the f key to load the scene you are currently watching on your "all clips" timeline to the viewer.
Then click on the tab for your "edit" timeline and edit the scene there. Click on the tab of the "all clips" timeline and continue viewing.
Hope this helps.
MtD -
Does Log & Transfer exist in FCP 5??
This seems like such a noob question, but I've searched my manual and all my menus, as well as looking all over this forum, and I can't find "Log & Transfer" in FCP5. Log & Capture won't work with my Canon Vixia HF10. I got that.
I can import video clips into iMovie '08 and move them over, but that seems way high on the lameness scale, and in looking at the movie properties of the resultant .mov file, looks like I lose something in the import.
I would rather not shell out the bucks to go from FCP5 to FCP6, but if I must... sigh.
Thanks in advance for any advice.
--drkenfp
Message was edited by: Ken FranklinYou will need to upgrade for Log and Transfer. It is a new feature for FCS2 / FCP 6.xx
Maybe you are looking for
-
Hello, I would like to ask you about advice. We have MSSQL 2008 R2, 32 bit. Memory is 4GB, split into 2GB for Windows and 2GB for applications. Database has recovery model simple because we have replicated data into other servers ( 2 ). Contemporary
-
Error installing Enhanced Module
hi everybody, I have upgraded my SGD-EE from 3.42 to 4.1. All works fine, except the enhanced module over a win 2003 server... the server is NOT 2003 sp1, and all was OK with SGD-EE 3.42. when I try to install the Enhanced Module over a windows 2003
-
Hi all can anybody guide for the same,My problem is our Costing & MIS team always reconcile production by taking (101,102) with( 321& 322) movement types,First of all i wanted to know what isb the reversal movement type for 321... In our case If user
-
EXIF time adjustment extension
Currently LR allows only for some kinds of time adjustments in selected sets of images, but in situations in which more than one person, or more than one camera are being used in the same event, the problem is often that the time recorded by the came
-
ipod 5 charger isn't working after updating to ios8