Log trapping with daignostic module

I am using a WebLogic mail session and diagnostic module to trap an occasional error in my server logs and it works great. However, now I have another requirement of trapping an error that is not in one of the WebLogic logs. This is a custom log written by the application. Does anyone know how to get the watch to trap a non-WL log?
Edited by: the_assface on Oct 2, 2012 5:11 PM

To my knowledge for both the SNMP (log filter) and Diagnostic Modules watch, you can only do this on server logs.
Note also the dropdown box when you configure a watch you can select either: collected metrics, server log or event data.
The same goes for SNMP, where you can configure a log filter, that listens for message from servers.
Maybe you can ask your development team to put the relevant application logs in the server logs (could even by using System.out.println which will end up in the .out files
when the server is started by using the nodemanager)

Similar Messages

Function module to create log entry with notification

Hi All,
I need to create log entry with respect to functional location and it should be attached to notification in transaction LBK1.
for creating log entry we have separate function module - DIACL_LOG_ENTRY_CREATE.
for creating Notification also we have separate function module
BAPI_ALM_NOTIF_CREATE.
how to link this notification to log entry.
is there any function module available.
Its urgent.
Points will be awarded.
Regards,
vinoth.

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Log on with a dialog user

Hi all Basis Gurus,
This is my question to Basis forum Please reply me immediately. while running ITS in CRM 50 i am getting mentioned below error (Logon on with a dialog user). can u please guide what are things i have to follow to resolve this prblem.
Please suggest me what shall i do.
Error when processing your request
What has happened?
The URL http://sapsrv.techmahindra.com:8010/sap/public/bc/its/mimes/system/SL/page/hourglass.html was not called due to an error.
Note
The following error text was processed in the system DEV : Log on with a dialog user
The error occurred on the application server sapsrv_DEV_10 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapsrv_DEV_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapsrv_DEV_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 000 -u: SAPSYS -l: E -s: DEV -i: sapsrv_DEV_10 -w: 0 -d: 20070223 -t: 144317 -v: ERROR_MESSAGE_STATE -e: Log on with a dialog user
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Regds,
Govinda ([email protected])

I have checked with that setting,but still it is showing the below error.is there any another way?
Error when processing your request
What has happened?
The URL http://gcecc62:8000/sap/bc/webdynpro/sap/zwda_logo_demo was not called due to an error.
Note
The following error text was processed in the system ECC : Die URL enthält keine vollständige Domainangabe (gcecc62 statt gcecc62.).
The error occurred on the application server gcecc62_ECC_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

How to copy Log text (with Date, Time stamp ) User IDfrom BP to Transaction

Hi Experts,
Can someone guide us how to copy Log text (with Date ,Time & User ID) fron Business partner (Prospect) to transactions by text detrmination procedure.
Regards,
Basavaraj Patil

save text
Fill out following parameters of SAVE_TEXT function module:
HEADER
TDOBJECT C 10 BUT000
TDNAME C 70 10 digit BP number
TDID C 4 Z001
TDSPRAS C 1 Language
INSERT = X
LINES
TDFORMAT TDLINE
|
|testtttttttttttttttttttttttt( Your text)
I would suggest you to use some other BAPI that would attach your text to BP than SAVE_TEXT.
If you still wanted to use SAVE_TEXT then first make sure how the TDNAME is generated. It depends on the text determination procedure. For examples, it can be guid of BP, GUID followed by date or time or else the BP number itself.
Just go to BP transaction, double click on the text pad, it will open you the SAP Script editor. Click on menu GOTO and select Header which will give you info about your TDID, TDOBJECT, TDNAME....
Hope this helps.

IE7 no log off with SPNego

Hi experts,
I have implement SPNego module in EP 7.0, now when I want to log off with the link (up on the right) with IE7 it don't work fine. The browser back on the same screen without close the application.
Some one can help me?
Thanks.
Bye.

Without knowing the details of the problem, or what application you are using it is hard to understand why you are getting different resutls with IE6 and IE7.
You are telling me that the user can close the application with IE6 - what does this mean ? Is there a button to logoff the application which appears in IE6, but not in IE7 ? is it possible for the user to close browser when they are logged onto app when using IE6, but they cannot close browser when using IE7 ?
Have you also tried with Firefox ?
Does this problem occur for all users ?
I am looking forward to getting the detailed description of your problem so I might be able to understand and help.
Thanks,
Tim

OMBPlus: masking usernames / passwords in log files with ********?

Hi all,
Subjects says it: how to hide username and password in OMBPlus logs.
Any ideas...?
Br: Ykspisto

I don't use default OMB+ logging for this reason, plus I often want more robust logging. I also built a wrapper for executing OMB+ statements to simplify my exception handling in my main scripts. By catching both the return string from a statement as well as the exception strings, I keep full control over what gets logged.
HEre is the meat of my main library file:
# PVCS Version Information
#/* $Workfile:   omb_library.tcl $ $Revision:   2.9 $ */
#/* $Author:   michael.broughton $
#/* $Date:   10 Mar 2009 11:04:50 $ */
# Default logging function.
# Accepts inputs: LOGMSG - a text string to output
proc log_msg {LOGTYPE LOGMSG} {
   #logs to screen and file
   global SPOOLFILE
   if {![info exists SPOOLFILE]} {
       puts "LOGFILE UNDEFINED! :-> $LOGTYPE:-> $LOGMSG"
   } else {
       set fout [open "$SPOOLFILE" a+]
       puts $fout "$LOGTYPE:-> $LOGMSG"
       puts "$LOGTYPE:-> $LOGMSG"
       close $fout
proc log_msg_file_only {LOGTYPE LOGMSG} {
    #logs to file only
    global SPOOLFILE
    if {![info exists SPOOLFILE]} {
       puts "LOGFILE UNDEFINED! :-> $LOGTYPE:-> $LOGMSG"
    } else {
       set fout [open "$SPOOLFILE" a+]
       puts $fout "$LOGTYPE:-> $LOGMSG"
       close $fout
proc exit_failure { msg } {
   log_msg ERROR "$msg"
   log_msg ERROR "Rolling Back....."
   exec_omb OMBROLLBACK
   log_msg ERROR "Exiting....."
   # return and also bail from calling function
   return -code 2
proc exec_omb { args } {
   # Uncomment if you want all source commands spooled out to log
   # disabled in production to avoid logging passwords.
   # log_msg_file_only OMBCMD "$args"
   # the point of this is simply to return errorMsg or return string, whichever is applicable,
   # to simplify error checking using omb_error{}
   if [catch { set retstr [eval $args] } errmsg] {
      log_msg OMB_ERROR "$errmsg"
      log_msg "" ""
      return $errmsg
   } else {
      log_msg OMB_SUCCESS "$retstr"
      log_msg "" ""
      return $retstr
proc omb_error { retstr } {
   # OMB and Oracle errors may have caused a failure.
   if [string match OMB0* $retstr] {
      return 1
   } elseif [string match ORA-* $retstr] {
      return 1
   } elseif [string match java.* $retstr] {
      return 1
   } elseif [string match Error* $retstr] {
      return 1
   } else {
      return 0
proc ers_omb_connect { OWB_USER OWB_PASS OWB_HOST OWB_PORT OWB_SRVC OWB_REPOS } {
   # Commit anything from previous work, otherwise OMBDISCONNECT will fail out.
   catch { set retstr [ OMBSAVE ] } errmsg
   log_msg LOG "Checking current connection status...."
   #Ensure that we are not already connected.
   if [catch { set discstr [ OMBDISCONNECT ] } errmsg ] {
      set discstr $errmsg
   # Test if message is "OMB01001: Not connected to repository." or "Disconnected."
   # any other message is a showstopper!
   if [string match Disconn* $discstr ] {
      log_msg LOG "Success Disconnecting from previous repository...."
   } else {
      # We expect an OMB01001 error for trying to disconnect when not connected
      if [string match OMB01001* $discstr ] {
          log_msg LOG "Disconnect unneccessary. Not currently connected...."
      } else {
          log_msg ERROR "Error Disconnecting from previous repository....Exiting process."
          exit_failure "$discstr"
   set print [exec_omb OMBCONNECT $OWB_USER/$OWB_PASS@$OWB_HOST:$OWB_PORT:$OWB_SRVC USE REPOSITORY '$OWB_REPOS']
   if [string match *Connected* $print] {
      return $print
   } else {
      return "OMB0-Unknown Error connecting. Validate connection settings and try again"
}and I handle setting up the log file with a standard header at the top of each script, as illustrated here in a script I use to set up and register a location and control centers for when we build a new dev environment. Most of the referenced variables are held in a config script that we use to define our current working environment, which I am not attaching as the names are pretty descriptive I think.
# PVCS Version Information
#/* $Workfile:   setup_dev_location.tcl $ $Revision:   2.1 $ */
#/* $Author:   michael.broughton $
#/* $Date:   27 Nov 2008 10:00:00 $ */
# Get Current Directory and time
# supporting config and library files must be in the same directory as this script
set dtstmp     [ clock format [clock seconds] -format {%Y%m%d_%H%M}]
set scrpt      [ file split [file root [info script]]]
set scriptDir [ file dirname [info script]]
set scriptName [ lindex $scrpt [expr [llength $scrpt]-1]]
set cnfg_lib "$scriptDir/ombplus_config.tcl"
set owb_lib "$scriptDir/omb_library.tcl"
set sql_lib "$scriptDir/omb_sql_library.tcl"
# Import Lbraries
#get config file
source $cnfg_lib
#get standard library
source $owb_lib
#get SQL library
source $sql_lib
# Set Logfile
#    This will overwrite anything set in the config file.
set LOG_PATH "$scriptDir/logs"
file mkdir $LOG_PATH
set    SPOOLFILE ""
append SPOOLFILE $LOG_PATH "/log_" $scriptName "_" $dtstmp ".txt"
# Connect to repos
set print [ers_omb_connect $OWB_DEG_USER $OWB_DEG_PASS $OWB_DEG_HOST $OWB_DEG_PORT $OWB_DEG_SRVC $OWB_DEG_REPOS]
if [omb_error $print] {
    log_msg ERROR "Unable to connect to repository."
    log_msg ERROR "$print"
    log_msg ERROR "Exiting Script.............."
    return
} else {
    log_msg LOG "Connected to Repository"
# Connect to project
set print [exec_omb OMBCC '$PROJECT_NAME']
if [omb_error $print] {
   exit_Failure "Project $PROJECT_NAME does not exist. Exiting...."
} else {
   log_msg LOG "Switched context to project $PROJECT_NAME"
# Check Existance of Oracle Module
set print [exec_omb OMBCC '$ORA_MODULE_NAME']
if [omb_error $print] {
   exit_Failure "Module $ORA_MODULE_NAME does not exist. Creating...."
} else {
   log_msg LOG "Confirmed existance of module $ORA_MODULE_NAME"
#switch back up to project level. You cannot attach locations to a module if you are in it.
exec_omb OMBCC '..'
log_msg LOG "Switched context back up to project $PROJECT_NAME"
# Force Re-registration of OWB User
log_msg LOG "(Re-)Registering user $DATA_LOCATION_USER"
log_msg LOG "Disconnecting from Corporate Design Repository"
exec_omb OMBCOMMIT
exec_omb OMBDISCONNECT
log_msg LOG "Connecting to Runtime Repository"
set print [ers_omb_connect $CONTROL_CENTER_SCHEMA $CONTROL_CENTER_PASS $DATA_LOCATION_HOST $DATA_LOCATION_PORT $DATA_LOCATION_SRVC $CONTROL_CENTER_SCHEMA]
set print [ exec_omb OMBUNREGISTER USER '$DATA_LOCATION_USER' IDENTIFIED BY '$DATA_LOCATION_PASS' ]
set print [ exec_omb OMBREGISTER USER '$DATA_LOCATION_USER' SET PROPERTIES (DESCRIPTION, ISTARGETSCHEMA, TARGETSCHEMAPWD) VALUES ('$DATA_LOCATION_USER', 'true', '$DATA_LOCATION_PASS')]
if [omb_error $print] {
   exit_failure "Unable to register user '$DATA_LOCATION_USER'"
log_msg LOG "Disconnecting from Runtime Repository"
exec_omb OMBCOMMIT
exec_omb OMBDISCONNECT
log_msg LOG "Re-Connecting to Corporate Design Repository"
set print [ers_omb_connect $OWB_DEG_USER $OWB_DEG_PASS $OWB_DEG_HOST $OWB_DEG_PORT $OWB_DEG_SRVC $OWB_DEG_REPOS]
log_msg LOG "Changing context back to project $PROJECT_NAME"
set print [exec_omb OMBCC '$PROJECT_NAME']
# Validate to Control Center
set lst [OMBLIST CONTROL_CENTERS]
if [string match *$CONTROL_CENTER_NAME* $lst] {
   log_msg LOG "Verified Control Center $CONTROL_CENTER_NAME Exists."
   set lst [OMBLIST LOCATIONS]
   if [string match *$DATA_LOCATION_NAME* $lst] {
       log_msg LOG "Verified Location $DATA_LOCATION_NAME Exists."
       log_msg LOG "Setting Control Center as default control center for project"
       exec_omb OMBCC 'DEFAULT_CONFIGURATION'
       set print [exec_omb OMBALTER DEPLOYMENT 'DEFAULT_DEPLOYMENT' SET REF CONTROL_CENTER '$CONTROL_CENTER_NAME' ]
       if [omb_error $print] {
          exit_failure "Unable to set Control Center $CONTROL_CENTER_NAME in default configuration"
       exec_omb OMBCOMMIT
       exec_omb OMBCC '..'
       log_msg LOG "Setting Passwords to enable import and deploy"
       set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
       if [omb_error $print] {
          exit_failure "Unable to log onto location '$DATA_LOCATION_NAME' with password $DATA_LOCATION_PASS"
       exec_omb OMBCOMMIT
       log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
       set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
       if [omb_error $print] {
          exit_failure "Unable to connect to Control Center $CONTROL_CENTER_NAME"
       exec_omb OMBCOMMIT
       log_msg LOG "Connected.............."
   } else {
       log_msg LOG "Control Center Exists, but Location Does Not."
       log_msg LOG "Creating Code Location."
       log_msg LOG "Checking Global_names...."
       set dbGlobalNames FALSE
       set oraConn [oracleConnect $OWB_DEG_HOST $OWB_DEG_SRVC $OWB_DEG_PORT $OWB_DEG_USER $OWB_DEG_PASS ]
       set oraRs [oracleQuery $oraConn "select value pvalue FROM V\$PARAMETER where name = 'global_names'"]
       while {[$oraRs next]} {
           set dbGlobalNames [$oraRs getString pvalue]
       $oraRs close
       $oraConn close
       log_msg LOG "Global_names are $dbGlobalNames...."
       if [string match TRUE $dbGlobalNames] {
           set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD, DATABASE_NAME) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS','$DATA_LOCATION_SRVC' ) ]
       } else {
           set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS') ]
       if [omb_error $print] {
          exit_failure "Unable to create location '$DATA_LOCATION_NAME'"
       exec_omb OMBSAVE
       log_msg LOG "Adding Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
       set print [exec_omb OMBALTER CONTROL_CENTER '$CONTROL_CENTER_NAME' ADD REF LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (IS_TARGET, IS_SOURCE) VALUES ('true', 'true') ]
       if [omb_error $print] {
           exit_failure "Unable to add Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
       exec_omb OMBCOMMIT
       log_msg LOG "Setting Control Center as default control center for project"
       exec_omb OMBCC 'DEFAULT_CONFIGURATION'
       set print [exec_omb OMBALTER DEPLOYMENT 'DEFAULT_DEPLOYMENT' SET REF CONTROL_CENTER '$CONTROL_CENTER_NAME' ]
       if [omb_error $print] {
          exit_failure "Unable to set Control Center $CONTROL_CENTER_NAME in default configuration"
       exec_omb OMBCOMMIT
       exec_omb OMBCC '..'
       log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
       set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
       if [omb_error $print] {
          exit_failure "Unable to connect to Control Center $CONTROL_CENTER_NAME"
       exec_omb OMBCOMMIT
       log_msg LOG "Registering Code Location."
       set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
       exec_omb OMBCOMMIT
       set print [exec_omb OMBREGISTER LOCATION '$DATA_LOCATION_NAME']
       if [omb_error $print] {
          exit_failure "Unable to register Location $DATA_LOCATION_NAME"
       exec_omb OMBCOMMIT
} else {
   log_msg LOG "Need to create Control Center $CONTROL_CENTER_NAME."
   log_msg LOG "Creating Code Location."
   log_msg LOG "Checking Global_names...."
   set dbGlobalNames FALSE
   set oraConn [oracleConnect $DATA_LOCATION_HOST $DATA_LOCATION_SRVC $DATA_LOCATION_PORT $CONTROL_CENTER_SCHEMA $CONTROL_CENTER_PASS ]
   set oraRs [oracleQuery $oraConn "select value pvalue FROM V\$PARAMETER where name = 'global_names'"]
   while {[$oraRs next]} {
     set dbGlobalNames [$oraRs getString pvalue]
   $oraRs close
   $oraConn close
   log_msg LOG "Global_names are $dbGlobalNames...."
   if [string match TRUE $dbGlobalNames] {
       set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD, DATABASE_NAME) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS','$DATA_LOCATION_SRVC' ) ]
   } else {
       set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS') ]
   if [omb_error $print] {
      exit_failure "Unable to create location '$DATA_LOCATION_NAME'"
   exec_omb OMBCOMMIT
   log_msg LOG "Creating Control Center"
   set print [exec_omb OMBCREATE CONTROL_CENTER '$CONTROL_CENTER_NAME' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE_NAME, USER, SCHEMA, PASSWORD) VALUES ('ERS Datamart Control Center','$CONTROL_CENTER_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER', '$CONTROL_CENTER_SCHEMA','$DATA_LOCATION_PASS') ]
   if [omb_error $print] {
      exit_failure "Unable to create control center '$CONTROL_CENTER_NAME'"
   exec_omb OMBCOMMIT
   log_msg LOG "Adding Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
   set print [exec_omb OMBALTER CONTROL_CENTER '$CONTROL_CENTER_NAME' ADD REF LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (IS_TARGET, IS_SOURCE) VALUES ('true', 'true') ]
   if [omb_error $print] {
      exit_failure "Unable to add Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
   exec_omb OMBCOMMIT
   log_msg LOG "Setting Control Center as default control center for project"
   exec_omb OMBCC 'DEFAULT_CONFIGURATION'
   set print [exec_omb OMBALTER DEPLOYMENT 'DEFAULT_DEPLOYMENT' SET REF CONTROL_CENTER '$CONTROL_CENTER_NAME' ]
   if [omb_error $print] {
      exit_failure "Unable to set Control Center $CONTROL_CENTER_NAME in default configuration"
   exec_omb OMBCOMMIT
   exec_omb OMBCC '..'
   log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
   set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
   if [omb_error $print] {
      exit_failure "Unable to add Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
   exec_omb OMBCOMMIT
   log_msg LOG "Registering Code Location."
   set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
   exec_omb OMBCOMMIT
   set print [exec_omb OMBREGISTER LOCATION '$DATA_LOCATION_NAME']
   if [omb_error $print] {
      exit_failure "Unable to register Location $DATA_LOCATION_NAME"
   exec_omb OMBCOMMIT
# Assign location to Oracle Module
log_msg LOG "Assigning Code Location to Oracle Module."
set print [ exec_omb OMBALTER ORACLE_MODULE '$ORA_MODULE_NAME' ADD REFERENCE LOCATION '$DATA_LOCATION_NAME' SET AS DEFAULT ]
if [omb_error $print] {
   exit_failure "Unable to add reference location '$DATA_LOCATION_NAME' to module '$ORA_MODULE_NAME' "
set print [ exec_omb OMBALTER ORACLE_MODULE '$ORA_MODULE_NAME' SET REFERENCE METADATA_LOCATION '$DATA_LOCATION_NAME' ]
if [omb_error $print] {
   exit_failure "Unable to set metadata location '$DATA_LOCATION_NAME' on module '$ORA_MODULE_NAME' "
set print [ exec_omb OMBALTER ORACLE_MODULE '$ORA_MODULE_NAME' SET PROPERTIES (DB_LOCATION) VALUES ('$DATA_LOCATION_NAME') ]
if [omb_error $print] {
   lexit_failure "Unable to add db_location '$DATA_LOCATION_NAME' to module '$ORA_MODULE_NAME' "
exec_omb OMBCOMMIT
exec_omb OMBDISCONNECT

NAC ADSSO with NAC Module isn't working for all modules

Hello,
We have a NAC OOB-L2-VG Deployment at the Central Site with VLAN Mapping and ADSSO which works just fine.
As part of the project we have implemented NAC Modules on ISR routers for the branch offices; same topology but as the documentation states no VLAN mapping was configured. The problem is that for some users in one branch office the ADSSO isn't working and in another branch office the ADSSO isn't working at all, all the users are getting authenticated with a local user we defined on the servers.
The configuration in both modules is exactly the same; they are using the same user to access the AD (the one used on the ktpass) the data links to the central site are both 1 Mbps and everything is pretty much the same thing.
I have checked the logs on the CAS-Module and it states that Windows SSO is running:
Nov 27, 2009 10:08:23 AM com.perfigo.wlan.jmx.admin.GSSRetrier$RetrierTask run
INFO: GSSR - Windows SSO is running
The interesting thing is that when the user goes thru the NAC process I see these logs:
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.SWissServer run
FINE: Sent Response to /172.19.5.11!
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSServer$GSSThread run
INFO: accepted ADSSO socket ...Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSServer$GSSThread run
INFO: accepting ADSSO socket ...
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: processing socket ...Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: TIMEOUT_SET FOR ADSSO SOCKET ... Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: reading peer's token_length Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:28 AM com.perfigo.wlan.jmx.admin.GSSHandler run
SEVERE: IO Error: Socket[addr=/172.19.5.11,port=1431,localport=8910]:Read timed out
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissHandler processPacket
FINE: SWissServer: get request from : 1043@/172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissHandler processPacket
FINE: SWissServer: Client OS is WINDOWS_PRO_XP
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil parseClientAddrList
FINE: IP=/172.19.5.11, MAC=00:1E:4F:53:97:7D
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.Shell writeToClick
FINE: /proc/click/intern_arpq/add_interest-->172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.Shell writeToClick
FINE: /proc/click/intern_arpq/remove_interest-->172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: IP=172.19.5.11, VLAN=19, OS=WINDOWS_PRO_XP
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Default Provider=Local DB
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Providers=Local DB;
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Number of providers=1
The IP address 172.19.5.11 is the IP of the PC during the unauthenticated role; what the user is finally seeing is the CCA Agent asking for user and password instead of using the ADSSO.
The version of the Agent is 4.1.10, the NAS and NAM are running 4.1.8 and the only ackword thing is that the Active Directory Servers are running Windows 2000 SP4.
Any assistance would be much appreciated.
Thanks,
DL.

Hi,
I too have the same error , Any one knows how to resolve this
Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.028 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSServer               - accepting ADSSO socket ...
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler              - processing socket ... Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler              - TIMEOUT_SET FOR ADSSO SOCKET ... Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler              - reading peer's token_length from Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.670 +0530 ERROR com.perfigo.wlan.jmx.adsso.GSSHandler              - IO Error: Socket[addr=/10.80.0.220,port=1583,localport=8910] null
2010-09-28 10:58:40.215 +0530 INFO com.perfigo.wlan.jmx.adsso.GSSRetrier              - GSSR - Windows SSO is running
2010-09-28 10:59:26.308 +0530 WARN org.apache.commons.httpclient.HttpMethodBase       - Going to buffer response body of large or unknown size. Using getResponseBodyAsStream instead is recommended.
2010-09-28 10:59:38.478 +0530 INFO com.perfigo.wlan.jmx.admin.OOBDelayTask            - OOBDelayTask: remove temp user [00:01:80:53:67:75]/[10.80.0.220]
Thanks in advacne

[svn:bz-trunk] 24053: Protect debug log messages with a isDebug() check.

Revision: 24053
Revision: 24053
Author:   [email protected]
Date:     2013-04-26 00:58:17 -0700 (Fri, 26 Apr 2013)
Log Message:
Protect debug log messages with a isDebug() check. The stringification of (large) parameters takes a heavy toll on performance otherwise.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Output.java

Revision: 24053
Revision: 24053
Author:   [email protected]
Date:     2013-04-26 00:58:17 -0700 (Fri, 26 Apr 2013)
Log Message:
Protect debug log messages with a isDebug() check. The stringification of (large) parameters takes a heavy toll on performance otherwise.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Output.java

I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

Can't log in with a family member ID

Dear all,
I'd have a question about family member log in to iCloud.
I own a mobile me family pack account which I upgraded to iCloud. Master account works great on my Mac. I have troubles using family members accounts.
I made the same operations for upgrading to iCloud with a family account. I can sign in and read my email with Safari, I got Apple's confirmation that my member account went to iCloud. I have problems when I try to log in with it. If I enter ID and pass, Mac says, in the iCloud preference pane "Unrecognized Apple ID or password." Then a window saying "You can't sign in at this time. Try signing in again." I also noticed that Mail app doesn't work
Any idea?? I thank you in advacne for your kind collaboration
Regards
Fabrizio

if you already have one iCloud account signed into in System Preferences>iCloud, you can add additional accounts but not there - you enter them in System Preferences>Mail, Contacts & Calendars. This will enable you to access email, but you can't sync Calendars and the rest of it with any account except the one you signed into first, the 'Primary Account'. If you want to use another account fully you would have to create a new user account on your Mac and sign in there.
Incidentally, if a Family Pack sub-account has been successfully migrated - as appears to be the case - it's an iCloud account like any other: the fact that it was once a sub-account isn't relevant, so don't let that confuse you.

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Why does iTunes repeatedly think I'm logging in with my Apple ID from a new computer?

To start, I figure I should give a little background... I have three computers authorized for use: Home PC, home laptop and work laptop (all Windows). I also have my iPhone 5 and an iPad Mini authorized as devices for use. I do 90% of my iTunes purchasing from the work laptop. I'll launch iTunes, attempt to purchase a song and go through the usual of logging in with my Apple ID... no sweat. Unfortunately, sometimes I'll get a subsequent screen stating:
"Because this is your first time making a purchase from this computer, you must verify your identity by answering the following security questions..."
The thing is, just two days prior, I purchased songs from iTunes on this laptop! I know that answering the questions shouldn't be an issue, but unfortunately, I tend to forget the answers (Sorry, I work for an Internet-based company, and we use A LOT of passwords and set up a bunch of security questions).
I'm just curious why iTunes thinks I'm using a "new" computer... Does it also use the IP address from which my requests are coming, for validation? (Apple ID Login/Password isn't enough security?) As I go between WiFi to an ethernet-connected docking station intermittently at the office, I can see how IP addresses might be rotated. If this is the case, will this impact the "five system authorization maximum" (i.e., is iTunes adding new systems to my "authorized list" each time this happens)?
In a time of constant hacking and Internet security weaknesses, I figure I should be happy this is in place... I gues I'm just looking for some answers.
Thanks,
- Vern

Hey there Vernholio,
It sounds like you are repeatedly being asked to authorize your computer even though you have made many purchases oh it from the iTunes Store. Generally this issue is caused by permissions or restrictions on the user account. I have 2 articles to recommend for you here. The first is:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
and
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
And to answer your question about whether or not the IP address changing might count against your authorization limit, no it will not. iTunes uses the computers installed hardware and software to keep track of that. Check out this info about authorization and deauthorization:
Remember to deauthorize your computer before you sell it, give it away, or get your computer serviced. Also, make sure you deauthorize your computer before you upgrade your RAM, hard disk or other system components, or reinstall Windows. If you do not deauthorize your computer before you upgrade these components, one computer may use multiple authorizations.
From: iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
Thank you for using Apple Support Communities.
Cheers,
Sterling

I create an apple id then i want to verify it, i verify it once then when i log in with my apple id it asked mi again to verify it.everytime i log in it asked me to resend verication and after i resend it i press done. Please can anyone help me ?

I create an apple id then i want to verify it, i verify it once then when i log in with my apple id it asked mi again to verify it.everytime i log in it asked me to resend verication and after i resend it i press done. Please can anyone help me ?

How are you verifying it? Are you responding to the email that is sent? If not, do so.
If so, then try changing your password.

My icloud activation lock is ON my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.

My icloud activation lock is on my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.

Yes the phone belongs to me. It was purchased from United Kingdom Vodafone to West Africa, i had to factory unlock to use any sim in it. so it belongs to me. I did the activation myself, now after updating my iphone to the latest update, it required a user id and password to activate the phone, but anytime i enter the details, it tells me the user Id is not correct but the password is correct..

I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
For Home Sharing to work you need to
File > Home Sharing > Create Home Share.
You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
Home sharing will then work

Log trapping with daignostic module

Similar Messages

Maybe you are looking for