Log version status does not change

Hi,
For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all. Can you please let me know the reason for this and how the message status can be changed to successful.
Thanks
Sreenivas

HI,
This already explained in above note please do accordingly..
See below..
Symptom
Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
Other terms
Delete, synchronous messages, message status
Reason and Prerequisites
You use the SAP NetWeaver Exchange Infrastructure.
Solution
Implement the attached correction instructions or import the Support Package listed below.
See the note.. for more details..
Note 930181 - Deletion of synchronous messages with message status 001.
Also see the note
Note 820149 - Deletion of manually changed and terminated messages
Also see the below threads
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
SXMB_MONI: LogVersion
Points rewarded if it is useful....
Regards
Chilla..

Similar Messages

Wait for Session Data status does not change in EWA

The hour glass next to the early watch alert in the solution manager system has the status "wait for session data". The SDCCN in the satellite system has the RFC configured correctly and the RFC is working fine when tested. I have installed the latest ST-PI and ST-A/PI for my basis release 640 on the satellite system. The basis release of the solution manager is 701. The self diagnosis button in solution manager does not list any errors or warnings for that satellite system.
There are no errors in the task Refresh Session task in the satellite system's SDCCN:
Refresh of session overview started from destination SM_R3SCLNT001_BACK
> Sessions are up to date
Refresh of session overview completed from destination SM_R3SCLNT001_BACK
Any ideas why I can't generate the EWA in the solution manager system?

Hello, I've got the same problem, went through the note, but it didn't solve my problem.
Here I can say, that several points from the note are NOT clear (typically SAP...):
I am falling in the category with ST-PI ... or newer.
- SDCCN:
Delete any task 'Maintenance Package' in the 'To do' tab.
Ensure that no connection to SAP is maintained in:
SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
<so I deleted all the RFCs in that location>
Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
<surprisingly, now there is a connection that has to be maintained!! Also the 'master' flag is always grayed out for me and never clickable!!>
Create a new periodic task 'Maintenance Package'.
<Not working, until I added back my SM_<SID>CLNT<No>_BACK connection>
- Step 2:
Re-import the service definitions, c)
They are saying how to setup the destinations, but NOT how to import the service definitions!
So, not really sure how to interpret and apply the note... Please help! The satellite system is NetWeaver 7.3 EHP1, Solution Manager 7.1 SPS10.
It goes on... I found this link:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CDMQFjAB&url=http%3A%2F%2Fwiki.scn.sa…
With it, I could transfer the data to the solution manager, but I can only see 'Data is available', when I click it and tell it to start the job, SM:EXEC SERVICES 000000000400100 runs for 6-7 seconds and completes successfully, though the EWA report still says 'Data is available', but no report is being generated. I also re-executed the job SM:EXEC SERVICES and still nothing.

Message status does not change from in-transit [SAP Exchange Connector]

We have a Exchange Server 2003 and SXC 2.05. and we are on R/3 4.6C.
Using the SXC we can send e-mail from SAP to any internet address. But in sap we only have the following status:
"Message transferred by node to communication system".
If the message was sent correct or not by the Exchange Server, the SAP can not obtain this status. And currently the messages are being lost. s
Anyone had gone through this problem ? Any tips will be very useful.
Regards
Ballie

we are using the SMTP node
these are the messages for the documents send.
1. Document sent
2. Wait for communications service
3. Message transferred to node
4. Document deleted from queue
but they still remain in 'in-transit' state, and it is not possible to detemine why the mails are being lost
if you can help on getting a detaield trace of the mesages on the connector and excahnge end.

Import status- import running does not change during the mass import of TR

Dear All,
I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
But the effect of the request is seen in the production system but the status does not change.
I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
I have restated the system but no use still the same.
Thanks in Advance...
Latha

Import Running for a long time on ECC 6.0
The background job RDDIMPDP is running on client 000 as well as the relevant client.
Below is the TP System Log:
WARNING: System CC6. Warning. 20090914042136 :
WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
Regards
Vikas Nagar

STMS problem ( import status - import runnig does not change)

I have the same problem like this:
While Transporting request in our production server the status of request from import running (truck sign) does not change.
But the effect of the request is seen in the production but status does not change.
see :Re: STMS problem ( import status - import runnig does not change)
I did se14 as experts suggested, the history truck sign go away,seem work fine,
but when new request need STMS to trans, the truck sign happened again,
I need you help,thank you!

thanks for all reply,
the last two answers are the same,I think this is the right key,
I'm a ABAPer actually,yesterday I asked our headquarters basis to help,
and I don't know what he did,now this problem is be solved,
PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
thanks again!

Read Status does not apply correctly when working out of a shared mailbox.

since updating to the Exchange 2010 SP3 RU4, users have been experiencing the same issues when working out of shared mailboxes. when user 1 opens an email or manually marks the email as read the status does not change from their perspective, the email remains
unread. however, the other users viewing the shared mailbox immediately see the status change to read. User 1 has to re-sort his email from catagory to received or from ect. As soon as the emails are resorted the status changes. alternatively, if User 1 views
another folder and returns back. the email is marked as read.
This problem happens with Outlook 2007 and 2010
This happens after re-creating the profile
opening outlook with the switches /cleanprofile /cleanviews seems to solve the problem for an hour or so.
I have run mailbox repairs on the server for the mailboxes in question.
changing the behaviour in tools>options>reading pane> has no effect.

Hi Brenn,
To narrow down the issue, we need more investigation:
1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
4.Please switch to online mode for shared mailbox and test the issue.
Regards,
Rebecca Tu
TechNet Community Support

BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
Deepthi

Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed.

My keyboard does not change language in facebook log in

I just bought MacBook Pro 15'4 I am in general new user with mac !!! My primary keyboard language is English and my secondary is Greek. When i try to log in to my facebook account i wrote my e-mail (in english of course) and my password is in greek and when i change the input source to greek does not change and greek became transparent in the language bar at the top !! I don't have an idea why cannot let me change the language only in this step to put my psw. I am using Safari and Chrome too, and is happening in both browsers too !!! I would be greateful and apriciated if someone can help me !!!

thanks a lot for your help !!! i downoladed firefox and the same problem when i will go to put my psw only in this step cannot let me change from english to greek !!!! why this is happening ??? i think that,this is a browser problem not macbook's or keybord problem !?!
*and it still does it when i change the primary language to greek again

Sometimes PDDocSaveWithParams does not change PDF version

Hi,
In a plug-in we are changing document properties like, Initial view, Page layout, Fast web view, pdf version etc, it is working fine most of the time, But for some documents it is not changing version backwards i mean, if the original file version is 1.5, it can change to 1.6 but does not changing to 1.4, why it is happening so, where could be the problem?
part of that code is given below for your reference
PDDocGetVersion( pdDoc, &asiMajor, &asiMinor );
asiMajor = 1;
asiMinor = 4;
PDDocSaveParamsRec pdDocSaveParams;
ProgressMonitorRec pMonitor;
pdDocSaveParams.saveFlags=PDSaveLinearized|PDSaveFullPDSaveCollectGarbage ;
pdDocSaveParams.newPath= asPath;
pdDocSaveParams.fileSys=ASGetDefaultFileSys();
pdDocSaveParams.mon=NULL;
pdDocSaveParams.monClientData=NULL;
pdDocSaveParams.cancelProc=NULL;
pdDocSaveParams.cancelProcClientData=NULL;
pdDocSaveParams.major=asiMajor;
pdDocSaveParams.minor=asiMinor;
PDDocSaveWithParams(pdDoc,&pdDocSaveParams);

You can do it like this:
_t_PDDocSaveParams sp;
memset(&sp,0,sizeof(_t_PDDocSaveParams));
sp.size = sizeof(_t_PDDocSaveParams);
sp.saveFlags = PDSaveFull;
sp.major = 1;
sp.minor = 4;
sp.newPath = [some pathName];
sp.saveFlags2 = PDSaveUncompressed; // <------ This will do the trick!
PDDocSaveWithParams([your pdDcoc], &sp);
This was tested with the SDK of Acrobat 9

Task status is not changed in UWL

Task status is not changing when it is executed in UWL. the tasks comes from R/3 when a workflow is executed . SAP says realtime refresh not supportinng in current version of UWL. please let me know any workaround to solve this issue.
Thanks ,
Sarath

Hi,
Unfortuntely, there does not seem to be a 'working' workaround for the issue.
This is resolved however in SAP Netweaver 7.0 EhP2 or 7.20 versions.
Please see /thread/1564782 [original link is broken]
Regards,
Srikishan

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

Invalid version: InstanceManager does not have property...

Dear adobe experts,
I've build an adobe form for a client. I've seen that there is a warning, when I download my form, in the attached error list (error.pdf). Here is more info regarding the warning:
- severity: warning
- message ID: 29488
- description: Invalid version: InstanceManager does not have property or function "count" for the current version of the document.
The warning is raised on the initialize event. I've used formcalc in the initializing event. I already tried to catch this warning by changing my code from formcalc to JavaScript but without success.
I've searched on google + the adobe forum and website but I haven't found a way to fix this...
I did find this in the adobe error code reference:
Code
ALC-XTG-032-304 (XML Form service)
Type
Error
Cause
[29488] "Invalid version: field does not have property or function 'length' for the current version of the document."
[29488] "Invalid version: field does not have property or function 'getDisplayItem' for the current version of the document."
[29488] "Invalid version: dataGroup does not have property or function 'spouse' for the current version of the document."
[29488] "Invalid version: dataGroup does not have property or function 'holdings' for the current version of the document."
[29488] "Invalid version: dataGroup does not have property or function 'owner' for the current version of the document."
Action
According to the adobe error code reference there is no possible action for this warning ...
Can anyone help me to fix this warning? Or at least confirm that there is nothing I can do ti fix this warning?
Thanks in advance and kind regards,
Niels

Hi,
Can you post the PDF form to a sharing site so that we can see the error and code?
Best to use acrobat.com, that way other people can take a look at it as well if I can't figure it out.
Steps to share a document...
(Thanks Srini for the instruction text!)
1. Go to URL http://Acrobat.com
2. Create an account if you don't have one.
3. Then login to the website.
4. In top left corner you will see a button called Upload.
5. Click on browse and select the file you want to upload.
6. After Uploading, mouse over on the uploaded file. Click the down arrow button and choose Share document.
7. Then you will be prompted a popup window at the lower left corner. Choose "Publish it" option.
8. In the next pop up window choose "Copy Link" option.
9. You can paste the link in the forum thread.
Hope this helps
Malcolm

When Matching Users Via Email, Changing Email Address Does Not Change Login

Well, the subject pretty much says it all, but here're some examples of what's going on:
Initial Data
- Create 2 Business Partners in SAP, C1 and C2.
- Create 2 Contact Employees in SAP, Adam with email adam at eden.org in C1 and Eve with no email in C2.
Synch
- Run Initial Synch followed by Standard Synch (for good measure).
- Web Tools gets user Adam with username adam at eden.org.
- Web Tools gets user Eve with username 2, the unique key for SAP's Contact Employee.
Data Change In SAP
- Adam's email is removed.
- Eve's email is populated with eve at eden.org.
Resynch
- Run Standard Synch.
- Web Tools changes both email addresses, with Adam's being erased and Eve's becoming eve at eden.org.
- Web Tools does not change the UserID, leaving Adam's as adam at eden.org and Eve's as 2.
That last bullet is the big problem: if a user changes an email address, the username doesn't change. Is there any way to change this across the board, or perhaps even force users to login via their current email address?

Also, there is a field in the Users table called EmailLogin. I have tried without success to change this field so that the user would use this field to login instead of the UserID, but have been unsuccessful in getting it to work.
As an alternative, the login control in /plugins/loginblock.ascx contains, as a portion, the following code:
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        NPUser user = new NPUser(loginMain.UserName);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Wouldn't it be simple to do the following?
    protected void GetUserIDFromDBByEmail(string email) {
        string userid;
        System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection();
        System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand(conn, "SELECT Users.UserID FROM Users WHERE Users.Email='" + email.Replace("'", "''") + "'");
        userid = (string)cmd.ExecuteScalar();
        cmd.Connection.Close();
        conn.Close();
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        string userid;
        // Though we're passing the "username" from the form,
        // we know that we're expecting the email to be in it
        userid = GetUserIDFromDBByEmail(loginMain.UserName);
        NPUser user = new NPUser(userid);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Again, the benefit to this is that you can synch using the Internal B1 Contact Code, which will remain constant and unique, and have the availability to change the way the user logs in by modifying the email address. Of course, email addresses would have to remain unique as well, but that's an easy enough thing to check for.

Component 0DAT (version A) does not exist in the database

Dear experts
i got this error.
Component 0DAT (version A) does not exist in the database
http://static.flickr.com/20/71394172_655d295b7f_o.jpg
A SAP expert recommended
"Use BC to activate the variable 0DAT from InfoObject 0CALDAY."
but i can't find 0DAT.
http://static.flickr.com/35/71390830_1049df5c3a_o.jpg
my system is
http://static.flickr.com/35/71390831_c837af0b47_o.jpg
Thanks in advance
David.kang
Message was edited by: David Kang
Message was edited by: David Kang

Mentor Eugene,
I guess the issues are related to "Sneak Preview version".
well, instead of creating new 0DAT,
i edited the RSZGLOBV table with 0DAT that i created before.
http://static.flickr.com/20/71437761_de16ddee16_o.jpg
http://static.flickr.com/34/71437760_5236824cc2_o.jpg
so two rows were changed. (from 6 to 4 ).
http://static.flickr.com/34/71437762_ed172b5577_o.jpg
<b> What do you think it is okay ? </b>
Finally, i can get rid of " Component 0DAT (version A) does not exist in the database " message.
therefore i expect everything goes well.
but ..
"Information No texts were maintained in language E for variable 0DAT " comes up.
Refer to the screenshot ( http://static.flickr.com/35/71439173_5c996d2111_o.jpg )
[Query Designer screenshot ]
http://static.flickr.com/34/71440191_b2a96a2ac4_o.jpg
[Material Number Master Data ]
http://static.flickr.com/34/71440190_a827c571ae_o.jpg
[Original Data file ]
http://safariexamples.informit.com/0201703661/IO_MAT_TEXT.csv
http://safariexamples.informit.com/0201703661/IO_MAT_ATTR.csv
mentor Eugene! thanks a lot.
with kind regards
David

Log version status does not change

Similar Messages

Maybe you are looking for