LOG VERSION STATUS IN MONI

Hi Guys,
i am getting synchronous messages status as " TO BE DELIVERD" in Runtime workbench-Integration engine monitoring, i tried to resend this to be deliverd message from Runtime work bench i'm getting error mesaage " Unable to schedule 1 of 1 messages for processing; update the status"
how i will update the status as per above message ?
when i checked with same message id in MONI, its showing as status "LOG VERSION ".
Can any one help me on this how to resolve this issue..
Thanks,
Siva

Hi,
Messages might got blocked in SMQ2.
If you found messages in Queue double click on the queue --> if there is any issue in the messages ---> double click on the messages which redirects you to moni try to rectify the error and reprocess again
Regards,
naveen

Similar Messages

  • Log version status in Integration Engine

    Hi,
    When montioring in Integration engine, couple of my messages are in 'Log version' status. These messages are in this status for the past two days.
    We are not able to cancel these messages also.
    What is the workaround solution to these messages.
    Thanks,
    Swapna

    It could be due to huge processing of message/data
    Do a complete cache refresh and check the same
    The solution in this thread points to XI BATCH.
    Log version in sxmb_moni in recever system (soap to proxy scenario)
    Edited by: Anusha  Ramsiva on Aug 6, 2008 2:57 PM

  • Log version status does not change

    Hi,
    For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all.  Can you please let me know the reason for this and how the message status can be changed to successful.
    Thanks
    Sreenivas

    HI,
    This already explained in above note please do accordingly..
    See below..
    Symptom
    Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
    Other terms
    Delete, synchronous messages, message status
    Reason and Prerequisites
    You use the SAP NetWeaver Exchange Infrastructure.
    Solution
    Implement the attached correction instructions or import the Support Package listed below.
    See the note.. for more details..
    Note 930181 - Deletion of synchronous messages with message status 001.
    Also see the note
    Note 820149 - Deletion of manually changed and terminated messages
    Also see the below threads
    sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
    SXMB_MONI: LogVersion
    Points rewarded if it is useful....
    Regards
    Chilla..

  • Log version status for message in PI message monitoring

    Hi All,
    we send IDocs from ECC to PI and then external systems. It's working fine all the time But third party system did not recieve only one message out of many. This missing message showing in PI  is like LOG version when I look at in monitoring.It was happend long back and its still showing as scheduled.
    And also there were no  pending messages in the queue.
    any idea what happend for this message exactly ?
    Thanks .

    Hello
    Check the notes below:
    #1471001     PI monitor: Synchronous response is displayed as log version
    #1256891     Logging errors in synchronous communication
    These may help explain/fix the error.
    Regards
    Mark

  • Status "log version" in message monitor

    Hi,
    In a proxy to JDBC scenario, i'm getting status "log version" in sxmb_moni.
    I'm trying to insert some records in target JDBC file and recovery JDBC response in a synchronous message interface.
    However, i never have ssen JDBC response .
    Why?
    What does "log version status" means?
    Thanks ,
    Carme Alentorn

    Hi Carme,
             The meaning of Log version is " When ever wrong entry field pass to the target end the problem will be raised.
    (Spicial chacters or more fields extra)
    I think it exatly data will be wrong.check ur data end.
    and check the adapter status.
    Regards,
    Sateesh

  • SXMB_MONI: Message status: Log Version ?

    Hi,
    We have a couple synchronous messages that have the "Log Version" status in the integration engine (ABAP stack – tcode: sxmb_moni).  It is a white circle icon. If we click on the legend (in sxmb_moni), we do not see this status … (we see all the others – green flag, race flag, etc)
    If we click in theses messages, only the following 4 pipeline steps are done (Inbound message + Receiver message + Interface Determination + Message Branching) … we do not see all the others (Request message mapping, … call adapter).
    What is the meaning of this status ?
    Thanks !

    from help.sap.com
    <i>This message version was generated by logging and does not have a particular status.</i>
    since yours is a sync scenario most probbaly what happend is that the response system was locked at the time request was send hence no response was received.
    we had the same problem and we re-send the message from sender system and it wen't through properly
    Thanx
    Aamir
    Note:i m still unable to figure out if its possible to re-send this from sxmb_moni,may be its not possible,also m not sure why we didn't get timeout error but got this one,may be some expert can shed some light on it.

  • SXMB_MONI : Log Version

    Hi Everybody,
    I am working on a  SOAP to Proxy Synchronous Scenario.When I am testing this interface we are getting a log version entry (Grey coloured dot symbol) in SXMB_MONI whenever the response fails from ECC and sometimes doesn't update SXMB_MONI even after processing.
    Is there any setting we have to do remove this log version entry.
    Can somebody help me out on this?
    Helpful answers will be rewarded points.
    Thanks & Regards,
    Zabi

    Hi,
    RWB shows the status of the messages as "Canceled with Errors".
    But my concern is the log version status in SXMB_MONI.
    Is there any way of getting rid of this status?
    Thanks,
    Zabi

  • MONI Message Status as Log Version

    Hi Guys,
      In MONI few of messages getting status as Log Version..Could any one plesae let me know why ? and what is best way of solution for this...
    Thanks,
    Siva...

    It is the processing instance of the mesg. If you restart the mesg for failure reason, it will version until execute successfully with version numbers.
    Refer this link if you have problem in the proxy side
    Log version in sxmb_moni in recever system (soap to proxy scenario)

  • XI monitoring log version

    Hello,
    Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
    Please help me abt this.
    Thanks,
    Vishal

    > Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
    >
    Hi,
    The synchronous scenarios are not stored in XI database (they are not persisted). In order to see them in SXMB_MINI, you have to change the log level to 2. This can be done in SXMB_ADM - Integration Engine Configuration -RUNTIME - LOGGING SYNC to 1.
    The status log version shows that the message got processed in IE.
    VJ

  • How to Dal with Log Version in SXMB_MONI

    DEAR EXPERTS,
    sCENARIO:
    FILE-----> PI -
    > SAP ECC
    Sender - File adapter
    Recv - Proxy
    Mode_ Sync.
    Some of the messages are going to STATUS - *Log Version IN SXMB_MONI. This is happening Intermitently.
    How to avoid log version in sxmb_moni..Any SAP Note available.....
    Take care,
    Pooja

    This probelm occurs randomly... There are no data related isues.
    there may not be a solution to this problem...may be just a precaution......just check with the end system developers and verify what was the status of the application when they processed the Req from XI (for which you got Log Version).....
    Other way to deal with this problem is resend the message.....AFAIK there seems to be no other way out.....if you find any then please let me know
    Regards,
    Abhishek.

  • Log version in SXMB_MONI

    what is the meaning of this particular message ?? If this error occurs where and what should we check ?? How to sort out the problem ??
    Log version
    This message version was generated by logging and does not have a particular status.
    thanks
    kumar

    Hi Palnati
    refer the below links
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5
    http://help.sap.com/saphelp_nw04/helpdata/en/44/f5c3de84056c30e10000000a114a6b/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Hope this will solve ur issue related to SXMB_MONI
    <b>Pls reward if useful</b>

  • Log Version

    Hi gurus,
    we have a lot of messages on sxmb_moni by "log Version" and does not have a particular status. How can we change the status feom scheduled to "error". We would like to delete after that.
    Kind Regards,
    Peter

    Hello,
    Please check if the notes below are relevant for your SP:
    1471001 PI monitor: Synchronous response is displayed as log version
    1044200 XI Runtime: Dump when restarting messages
    1161002 XI runtime: Activity monitor
    Regards,
    Sarah

  • Cannot open Microsoft Office Mac 2011 after migrating to new computer. OS 10.9.1: Microsoft Error Reporting log version: 2.0  Error Signature: Exception: EXC_CRASH (SIGTRAP) Date/Time: 2014-01-19 23:31:24  0000 Application Name: Microsoft Word Application

    Got a new MacBook Pro and migrated my settings and applications from old computer. Reinstalled Microsooft Office from a disk, after I opened a document and it said I was missing some software components. Now when I open any office application, I get:
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_CRASH (SIGTRAP)
    Date/Time: 2014-01-19 23:31:24 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.3.9.131030
    Crashed Module Name: merp
    Crashed Module Version: 2.2.4.131030
    Crashed Module Offset: 0x00004422
    Blame Module Name: MicrosoftSetupUI
    Blame Module Version: 14.3.9.131030
    Blame Module Offset: 0x0000e516
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0

    Hi,
    Do you get the error message like "Office <Update version number> can't be installed on this disk. A version of the software required to install this update was not found on this volume. To learn how to fix it this issue, see "I can't install Office
    for Mac updates" at http://www.microsoft.com/mac/help.mspx."
    If it was, please follow the kb to fix the issue:
    http://support.microsoft.com/kb/969065/en-us
    Then, here is a forum for Office based on the Windows operation system, we are lack of the source about the Office for mac, you'd better post your question to Answers forum:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
    Regards,
    George Zhao
    TechNet Community Support

  • Hi when I open each application for mac office, the app closes and it pops up the following error: Microsoft Error Reporting log version: 2.0  Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2014-03-27 14:14:52 +0000 Application Name: Microsoft Exce

    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2014-03-27 14:14:52 +0000
    Application Name: Microsoft Excel
    Application Bundle ID: com.microsoft.Excel
    Application Signature: XCEL
    Application Version: 14.1.4.111121
    Crashed Module Name: libTIFF.dylib
    Crashed Module Version: unknown
    Crashed Module Offset: 0x000078ae
    Blame Module Name: MicrosoftComponentPlugin
    Blame Module Version: 14.1.4.111121
    Blame Module Offset: 0x0000d9fc
    Application LCID: 1040
    Extra app info: Reg=en Loc=0x0410
    Crashed thread: 0

    Hi mattiaprodomo,
    If you are having issues with an app that unexpectedly closes on launch, you may find the following article helpful:
    OS X Mavericks: If an app freezes or quits unexpectedly
    http://support.apple.com/kb/PH13975
    Regards,
    - Brenden

  • My Microsoft Office won't work! Here is the error report. Microsoft Error Reporting log version: 2.0  Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2015-03-04 12:04:03  0000 Application Name: Microsoft Word Application Bundle ID: com.microsoft

    My Microsoft Office won't work after upgrading to the newest OS from Apple! HELP!!!!!!
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2015-03-04 12:04:03 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.4.8.150116
    Crashed Module Name: unknown
    Crashed Module Version: unknown
    Crashed Module Offset: unknown
    Blame Module Name: MSXML
    Blame Module Version: 14.4.8.150116
    Blame Module Offset: 0x00003125
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0

    If your startup disk says it is full, you need to remove some of your stuff.
    Either move some documents/movies/pictures to an external drive (if you want to keep them), or delete them from your startup drive. Then, empty the Trash.
    If you move them to an external, you will still have to delete them from the internal drive.
    That won't fix Office (I don't think), but it will make everything run better. You need a minimum of 10GB free (more would be better).
    You might need to reinstall Office. It should work without problem (well, at least as little problem as Office can muster).

Maybe you are looking for