Logc Pro X - TIME ruler - selecting exact time for bounce.
I often need to make my bounce exactly :30 or :60 for radio and TV work. In LP9 I was able to view the TIME ruler, without making any changes to project settings, and select the time I needed (setting the locators for the bounce).
In LPX it seems that the to see a time scale (in musical mode) i need to view the secondary ruler, yet it is not selectable to set the locators to exactly :30 or :60 or whatever, I had success by switching the project settings to TIME, then setting the locators, then going back to musical. But that sure is a lot of steps.
AND I hate to lose the functionality of my audio bounced files not having the tempo information embedded because I am in TIME mode.
Need a quick workflow solution. Head scratcher, Any thoughts?
LOVE LOGIC X
Needs CLIP GAIN!
The issue is one of workflow. I realize that it is in settings. The fastest way I can find to select :30 exactly is to use the project settings key command "option-P" and under general, uncheck "Use musical grid", putting LOGIC in TIME mode.
Then highlite the primary ruler to :30. Then bounce.
Seems fine. But bouncing in TIME mode does not record the tempo information in the audio file, which can be a drag. So to add tempo information you have to switch back to musical mode. MULTIPLE STEPS.
LPX seems to have added steps to what was once a simple swipe on a second ruler that could be selected, and then hit bounce.
So I was wondering if anyone had found a better workflow solution.
Similar Messages
-
How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs & artists? What is the correct way to transfer my 3000 songs to Time capsule, to free the memory of my Mac? Thanks a lot. Carlo Molinari (Rome - Italy)
How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs & artists? What is the correct way to transfer my 3000 songs to Time capsule, to free the memory of my Mac?
The following are the basic steps to transfer your iTunes Media folder from your MacBook Pro to the Time Capsule (TC). Note: You will leave the iTunes Library, and its associated files, on the MacBook Pro as you will only be moving the media files.
Be sure to shutdown iTunes before starting.
Next, move the "iTunes Music" folder, located in ~/Music/iTunes/, to wherever you want on your TC's internal hard drive. Remember to leave the Album Artwork folder, as well as the three individual library files where they are on the MacBook Pro.
Wait a while. If you have a large library, this will take a bit of time.
Once the iTunes Media folder has been transferred, open iTunes. Note: It will still be looking at your local iTunes Library on the MBP. As such it will think that the iTunes Media folder is still on the MBP as well. However, we just relocated it to the TC. If you attempt to select any song, you will get an error that the song is "missing." Not to worry, we will correct this in the next step.
We need to tell iTunes the media has moved to the TC's internal HDD. To change where iTunes "looks" for the media, open iTunes and go to the Advanced > General tab and use the "Change..." button to tell it where your new "iTunes Music" library is located.
Once this is done iTunes will likely pop up a progress window telling you that it's re-analyzing your library. Let it complete this step.
As a final check to make sure everything when as planned, click on any library file from within iTunes and press cmd + i (or View > Get Info). At the bottom of the Summary tab in that window is a "Where:" section that tells you the actual file path to that piece of media; be sure that path begins with the name of your TC's drive, and not "Macintosh HD." -
Final Cut Pro takes time to share/export a 40 minute video
I bought a brand new new Macbook Pro (4 GB RAM, i5, HD 500 GB (300 GB available) Mid 2012 model and it takes 3-4 hours to share/export a 40 minute video without any effects applied on the clips. I have another Macbook Pro, same model and same specs and it just takes an hour to render the same video/project which I think is reasonable time.
Video files are from my Canon 60d camera which are .mov files. I usually export my projects to H.264 Video and AAC. (Share>Master File)
I don't have any problem exporting/sharing a 3 minute video with effects applied on the clips on my macbook Pro where I'm having a problem with because it has the same export/share time with my other MBP. It takes 5 minutes to share/export a 3 minute video which I think is reasonable. The problem is why my new Macbook Pro takes time to share/export a project with a video duration of 30-40 minutes compared to my other Macbook Pro.
Thank you for your help!
Final Cut Pro version: 10.0.8
Macbook: OS X 10.9.2If you have two MBPs with exactly the same specs (including GPU) – and you have comparable free space on both system drives –and comparable free space on any media drives – then verify that your perceptions of their exporting times are different by doing a test with identical projects media and export settings – and ith no other apps running. If you confirm that one is much faster than the other, I'd suspect the GPU. Also open Activity Monitor to see what's being reported – particularly to see whether there are differences in the way memory is being used.
Russ -
HT201250 I use Snow Leopard and tried restore my Macbook pro using Time Machine.
After waiting a considerable time for Time Machine to restore my whole system, applications and files I had problems in that my Macbook Pro would not restart. The Apple logo appeared but then the screen scrolled down and a lot of letters, numbers and symbols appeared - not making any sense, and a box appeared telling me to restart holding down the on button. This I did. However it kept on repeating. In the end I had to reinstall the whole lot. Fortunately I had backed up all my files. I cannot use some of the programs I have because I cannot retrieve them. I do not have a disk with them on to reload because I downloaded them from the net and they are old progs and still did what I wanted. A lot of files I have saved do not open now without the old system and apps.Can anyone come up with an idea?
ds store wrote:
Ah that's good to hear, does this still work if TimeMachine updates to reflect the 10.7 drive?
There is no special update. After installing Lion, Time Machine will do a normal "incremental" backup, of the stuff that's new or changed. That will be relatively large and lengthy, of course, since OSX and the default Apple apps will all be backed-up.
But there's nothing else different about the TM drive. It stil contains all the past backups, including older versions of OSX.
In other words if a user upgrades to 10.7 and doesn't like it after a few days/weeks, has TM connected and it updated to relfect 10.7, can the user c boot off the 10.6 disk erase and restore 10.6 from the TM drive?
Yes, except you don't have to erase.
You just boot from the Snow Leopard Install disc and do a full system restore. That includes erasing the destination, so it doesn't matter what's on it. Then everything on the backup is restored, including OSX, apps, users, data, settings, etc., just as it was at the time of the backup selected.
See Time Machine - Frequently Asked Question #14, especially step (g). The sample is a bit fuzzy -- it's a photo, since you can't screenprint there, but note that the last two backups were made on Snow Leopard:
Once that's done, and the system restarts, you can use the "Star Wars" display to restore selected items from later (ie, Lion) backups, but of course in some cases (Mail for one), the Snow Leopard apps won't work with the Lion-formatted files. -
When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback
ilw-00 wrote:
How can I do this? How can I find the sparesbundle? What is the best way to mount the time capsule internal disk?
Open a Finder window. If you see your Time Capsule in the "Shared" section of the sidebar, clicking on it should show the "Data" volume (or whatever you named it) in the main part of the window. Double-click on it to mount the "Data" volume.
If you don't see your Time Capsule in the Finder sidebar, you may not have enabled "disk sharing" in AirPort Utility. In AirPort Utility do a "manual setup of your Time Capsule, then select the Disks panel, then the "File Sharing" tab, then check "Enable file sharing", select a security method (I use "With a disk password"), fill in the remaining options as desired, then update the Time Capsule. Once it restarts, try again to see your Time Capsule in the Finder's sidebar. -
Can't backup macbook pro to time capsule
I have backed up IMAC to my time capsule no problems but when trying to back up my macbook pro it wont do it. The macbook pro sees the time capsule but once time machine commences you get error mesage advising problem encountered as macbook pro and time capsule not on same network?
Any ideas?Are you connected to the TC by wireless?
Are you running Lion? Try using ethernet and turn off wireless.. what happens?? -
I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??
Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.
-
How do I select multiple files for download at one time?
I'm trying to batch download 24 files at one time. Firefox will only let me select one file at a time for download. Is there a way around this?
try flash got and DTA plugins
-
Can i access my old macbook pro's 'Time machine' saved on time capsule with a new laptop
How can i access my old macbook pro's 'Time machine' saved on time capsule with a new laptop.
Also why can i only EITHER have the capsule attched to the internet OR have it as my backup external hard drive?? Things are not running smoothly can someone please help?
Many thanks,
CirsflanAnswered in your other thread.. keep to one. Just confusing running two threads with the same question.
https://discussions.apple.com/thread/4863146?tstart=0 -
There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.
hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?
I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.
-
I backed up my macbook pro using time machine and now my iphoto and itunes are empty. how do I reset the computer to an earlier date? and why would this have happened?
Without more information, I can't tell you why it happened. As to how to restore to an earlier date, please check out the article below. Should help you to restore form a time machine backup.
http://support.apple.com/kb/HT1427 -
We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?
We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?" -
Alert is not working for mutiple times for list "select" function in sapui5 XML view
Hello All,
I am trying to open an alert for multiple times for list "select" function. But it's opening for only one time .
Please find code below.
View Part
<List id="contactedit" select="somefunction">
<CustomListItem id="custom1" type="Inactive" >
<content>
<Label text="this is label" />
</content>
</CustomListItem>
</List>
Controller Part
somefunction: function(oEvent){
alert("this is an alert");
Thanks in Advance
D.MohanbabuI think I saw this question in stack overflow. And I answered it :-)
I believe that it is because you can only one item in the list and once the item is selected, re-selecting it will not fire the event.
Try adding more items to the list and select different items.
Thanks
-D -
Long Time for execution of select query
Hi,
I have a select query
select * from Table where Time1 and time 2;
The table has a large no. of colums than rows. So the query taking a lot of time to execute.
Is there any way we can reduce the time taken by the query.
Thanks
Jit
Message was edited by:
user637843select * from Table where Time1 and time 2;I doubt this query run for long time. More or less 1 millsecond, the time for Oracle to check the query syntax and return errors.
Nicolas.
Maybe you are looking for
-
Is there a way to view the text in a text message?
Is there a way to view text in a text message on your bill?
-
Interactive document using Smartforms
Hi, The customer wants an interactive page to be developed using Smartforms with editable text field and checkboxes. Can this be done in Smartforms? If yes then can you please tell how to do it? I thought Smartforms in for output only. Can it be used
-
Problem Exporting QuickTime Movie.
Hey guys, when I vew my project in the canvas it doesn't play smoothly between clips. It's like it gets stuck on the last frame of the first clip for a split second. So I exported it to Quicktime movie and when I play it back and it skips and sort of
-
Appropriation Request(IMAK-POSNR) is 'Approved' or not?
How can we know that the System Status(RAIA1-SYSST1) of an Appropriation Request(IMAK-POSNR) is 'Approved' or not? I mean in what table I can found this or if you can give the name of a functional module that will be also great.
-
Hi expert. I have this problem. I have the rol SAP_EMPLOYEE_XX_ESS_WDA_1, in NWBC show the service absence, but I need know which is the service?. which is The web dynpro component or application web dynpro? I need show this service in the portal(ja