LOgged Changes in Customer infotype

Dear All,
We have built a custom infotype for holding the bonus data. Some infotype data is stored in a custom table apart from Infotype table. We need to report/ log the changes to the data that is stored in the custom table. I am unable to find out how this can be achieved in table T585A, b or C.
Thanks in advance.
Regards,
Lakshmi

Hi Ram Manohar,
Thanks for your quick response. But the requirement is to report the changes in the infotype using the standard transaction S_AHR_61016380.
I have done the configuration updations in Table T585A, B & C but the data which is in custom table is not getting reported during running the log report.
Can you pls let me know how to go about this.
Regards,
Lakshmi

Similar Messages

Logged changes in Custom Table

Hi Gurus,
Need the Transaction code to check logged changes in Customizing Table ....... Something Like V_T510N...
...Need to know the USER ID who changed the table......
NOTE: THIS IS FOR CUSTOMIZING TABLE....Not INFOTYPE or PA Table.
Kumarpal Jain.

Hi
Check SM30->View of your Custom Table Name->Utilities -> change logs.
Check Tables : CDHDR and CDPOS also.
Regards,
Sreeram

Changes in custom infotypes not captured in badi 'HRPAD00INFTY'

Hi
I have created a custom infotype 9038 and my requirement is, any changes in the infotype have to be logged in to a custom table. Any changes in standard infotypes are getting captured in badi 'HRPAD00INFTY' - method 'IN_UPDATE' and i am able too update my custom table. But changes in custom infotype 9038 is not triggering the badi 'HRPAD00INFTY'.
Could any body suggest which tables should be maintained to trigger the badi or do we need to do any configuration using SPRO?
Thanks and regards
Badri

I created the interface which is running successfully.
Now i did some changes in target table(data base level).
I reversed the updated table in model section. Till here its ok
The table which is updated in the model section is not automatically updated in the interface.
I have to drop the existed datastore in the interface and and re do the entire process of bringing the updated datastore, mapping,etc..
Please tell the any alternate way.
Regards
suresh

PA - Log Changes done to infotypes

I want to Log Changes in Infotypes
For exg, if any changes are done in any infotype I want to log it and when I run a report I should see all the changes which are done in SAP system
For exg this report - S_AHR_61016380 - Logged Changes in Infotype Data..
I have logged this infotypes, but when I report I dont see any changes in any infotype I do,
If you could help me on this would be gratefull

Hi Fahad. When you say that you have logged the infotypes, do you mean that you have gone into the configuration and added them to the report? If you go to transaction SM31, look at view V_T585A. This will show you all of the infotypes that are currently set up for the logged changes report. If you go to the change view you should be able to add infotypes. View V_T585B will show you which field groups have to contain a change for the infotype to be included on the report. If you have field group 01, the field name should be *. This means that any field that is changed for the infotype will result in the change being included on the report. View V_T585C will give you the field group characteristics. The document type for the field group can be either 'S' (short) or 'L' (long). We have all of ours set to short. Perhaps your changes aren't showing up on the report because you're missing an entry in one of these views. I hope this helps.
- April King

Logging Changes in Org Man Infotype Data

Hi,
We currently use Auditing to log changes to PA infotypes but would also find this function useful on OM infotypes (eg IT1001, IT1018 etc). It's possible to see who changed it last using the 'Change Information' icon, but we would like to be able to see the before and after picture where someone has edited a record and overwritten the original data.
Does anyone know if this is possible? V_T585A doesn't allow selection of OM infotypes for logging.
Thanks
Emma

How about RHRHAZ00 for org management audit trail?
You can set up which infotypes you want to audit in T77CDOC_CUST
Edited by: Harish T K on Dec 23, 2010 10:06 AM

Adding Standard Infotype fields to Custom Infotype

Hi,
I have a Requirement where I've created a Custom Infotype. Now, client needs to add Standard KOSTL and Email Address fileds to it. Whenever, someone tries to create / change this Custom Infotype for any Employee, the Pernr's KOSTL and Email Address should get populated automatically as in Standard Infotypes 0001 and 0105.
Please guide me, how to achieve this functionality.
Regards,
Hems.

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Change Pointers not being created for HR-PA Custom Infotype

Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

How to push custom infotype details to Standard Log Report

Hi Experts,
i am using S_AHR_61016380 SAP Standard Report for Log Change Data in
the report development. However, the standard report for logged changes
does not capture the long term documents run for the custom infotype.
it is only giving the logged changes for the standard SAP infotypes
and it doesnot capture any details for the custom infotype.
We are looking a possibility on how to push custom infotype details to S_AHR_61016380.
Pls suggest in case you have any inputs for the same.
Thanks & Regards,
Kishore.

Hello Amith,
As u said i have created a Z program, and also i have used the following FMs.
1. 'HR_INFOTYPE_LOG_GET_LIST'
2. 'HR_INFOTYPE_LOG_GET_DETAIL'
Using these FMs i am able to get log records from the standard infotypes but i am unable to fetch data from the custom infotype tables.
Please give me any solution to read the log records from the custom infotype tables.
Thanks,
Kishore

Custom Infotypes and Change History

HR Gurus,
I am being told that with custom infotypes, we can not track change history.
THe scenario I have is that I need to be ableto capture Address Changes (Address Line 1, Address Line 2, City, State and Zip) and send a Delta for the changed address.
In my unique situation, I have been told that if Address Line 2 is deleted, than the change histiry can not capture the fact that it was deleted and all change history regarding its prior existnace will be deleted if the Address Line2 is removed.
I am not entirely sure=, but I wanted to ask you guys anyway if I woukd be able to track Change history.
-Feroz

Hi Feroz,
Do not believe everything you hear. You can view changed and deleted information from custom infotypes and fields.
First, I am not sure why you need a custom infotype for addresses when IT0006 is available to you. You can more easily create a custom subtype if the supplied ones do not meet your needs.
But for any PA infotype including custom infotypes, you can use the Logged Changes to infotype Data report (RPUAUD00). You have to set up the infotype to be logged in the IMG: Personnel Management --> Personnel Administration --> Tools --> Revision --> Set Up Change Document. In the first section, you list the infotypes you want to track changes for including your custom infotype. In the second step you list the fields you want to track. "*" means any change to any field. And in the third step you indicate whether the information is kept as a long term or short term document.
When you run the report, you can enter the infotype and period you want and the first list will be all changes to that infotype. Select one to view the details and you will see each field listed with the original data and the new data. If a field is deleted, it will appear blank in the new area, but you can still see the old entry in the previous data column.
Also, if an individual deletes a entry in an infotype by using Copy and enters in a new start date, the old record will be delimited, but still be available for viewing. Also, every infotype records who made changes and the date of the change.
Paul

Change layout of Adhoc query output list for Custom infotype

Hi All,
The fields in the Infoset query output on a custom infotype are aligned with the fields u2018payment typeu2019 and u2018amountu2019 appearing repeatedly(in columns) as declared in the Infotype and the output will be a long horizontal list.
Instead, the requirement is that the output list should show vertically so that If I choose u2018Payment Typeu2019 and u2018Amountu2019 as output fields, it will show a long vertical list as in the case of a standard infotype (IT0008).
Also, this way enables user to use Payment Type as a selection criteria so as to just pulling the needed payment type. When we use IT0008 in the infoset it works fine but in custom IT it does not work.
Any pointers/suggestions on how we can achieve this would be helpful.

Hi yu liang,
You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful...

Table for the report RPUAUD00 Logged Changes in Infotype data

Hi
I have a query with the program RPUAUD00 Logged changes in Infotype Data. In which table stores the details of the program RPUAUD00. for example in the 1st period there is a LWP record for the employee. If in the 2nd period the LWP entered in 1st period has deleted, in the log the LWP displays for 1st period new field contents, Action Indicator I. The deleted information displayes in Old field contents with the Action Indicator D. We want to know in which table the LWP insert and LWP delete (d) details are stored.
This information required to create a report for ESI. In the report No of days (payroll processed for) has to mention. To know the no of days need to access the report RPUAUD00. From the RPUAUD00 the details of LWP insert and delete can be known.
Request to help in solving the issue
Thanks & Regards
EKP Yadav

Hello:
Logged changes in Infotype Data are stored in cluster table PCL4 ID LA and SA for employee and LB and SB for applicant. Maybe L is for longterm and S for shorterm
Cheers.
Antoine

Report for logged changes in infotype data

Hi
Can anybdy suggest me the steps for configuring logged changes in inotype data.
My client wants a report to view the changes in any infotype record, specially in 0008 and absences.
Reagrds
Waseem

Hi
I already config these table but it is not refelecting
In table V_T585A
maintain Transaction Class is A and maintained IT
in table V_T585B
Maintained field group 01
                 Field Name is * (for all)
In tabel V_T585C
Maintained Doc Field Gr. 01
                 Doc Type is S
                 SupFldGr. is blank
After this run report RPUAUD00
and TC S_AHR_61016360
But nothing to display.
Please Help me.
Regards
Waseem

Add additional selection fields to RPUAUD00- Logged changes in infotype rpt

Hi,
I'am trying to add additional selection fields to Logged changes in infotype report and was wondering if this can be done through customization instead of creating a copy of the std report to add the additional fields?
Thanks

Hi Ajay, The requirement is to add fields like personnel subarea, op code for reporting purposes.
Thanks

Logged changes infotype data

Hi Experts,
I have configure the Logged infotype tables(V_T585A/B/C) and getting the output.
My requirement is to display the additional column for subtype text.
After running the report RPUAUD00 we get the Logged changes in Infotype data and if we click on particular row in the output we will get complete details. Then the first column is Subtype.
Can we get Subtype text to display(in another column)??
Is that possible?
Thanks in advance,
Points will be rewarded.
Regards
Prasad.

Hi Praneeth,
Thank you for the reply.
No, Even before doing the changes i had this problem. I will check the same with ABAPER once again.
Do we have to configure(V_T585A/B/C) Actions differently compared with other infotypes
Thanks in Advance.
Regards,
Prasad

Logged Changes in Infotype

Dear Team:
The transaction (S_AHR_61016380)Logged Changes in Infotype Data doesnu2019t pick up any changes in info type ( 0021). Please advise me why the report is not retrieving any information on the same.
Regards
Team Member.

Hi Patlolla,
Goto SPRO : Personnel Administration -> Tools -> Revision -> Set up change document.
There, add IT 0021 as an infotype to be logged.
Best Regards,
Dilek

LOgged Changes in Customer infotype

Similar Messages

Maybe you are looking for