Logged in here first time failed
logging into this forum the first time, I was asked whether I want to keep my current user name as an alias for sending posts. I've choosen yes and got an error message.
Only creating a new alias worked.
Hey NOKIA: Please Test what you place online!!!!
So many things that do NOT work with OVI or that works but is by far too slow (e.g. ovi music player)
Hi,
your value of the NavigationTarget parameter does not seem correct - why does it start with "ampersand"?
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
Maybe try to remove the ampersand so that the parameter looks as follows:
http://<server>:<port>//irj/portal?NavigationTarget=ROLExyz
Regards,
Tanja
Similar Messages
-
How to disable chanllenging questions while user log in for first time
Hi All,
How to disable challenging questions while user log in for first time in OIM 10g and OIM 11g
also i need to know how to change the Oracle logo with custom logo in both versionsIn 11G:
To disable challenge questions at start up: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14308/system_props.htm#BABBDCJH (System Property Named: "Force to set question at start up)
To change logo: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm#CHDIFJEJ
In 10G:
Dig the documentation.
A suggestion, please go through the documents first as they have quite a bit of information.
HTH,
BB -
Can't log into Facebook first time
When I first call up Facebook in my address bar, and try to log in, I get the cursor with the blue ball on it. The second time I call up Facebook, I am able to log in (or if I go through Google, or through my bookmarks). This problem started happening after my AirPort crashed, and was fixed through technical support. Tried using Disk Utility (Repair Permissions) with no effect.
HI and Welcome to Apple Discussions...
Try deleting this file. com.apple.Safari.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
Try accessing your account on Facebook.
Carolyn -
URL getting concatenated when user logged in for first time
Hi
I am sending the below url to the mail as a notification .
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
when the user click on the link ,it should route to the particular page
case 1 when user already logged in, then after clicking of this link it opens new window and shows the particular page correctly
case 2 when user not logged then afetr clicking of this link it asks for user id and pwd which is ok, but the link is getting concatenated like
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz=NavigationTarget=&ROLExyz
then showing the error message that page doesn't exist.
I am usig Escpae URL function to encode the url ( NavigationTarget=&ROLExyz ) when sending the link to the user in mail .
Regards,
AmitHi,
your value of the NavigationTarget parameter does not seem correct - why does it start with "ampersand"?
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
Maybe try to remove the ampersand so that the parameter looks as follows:
http://<server>:<port>//irj/portal?NavigationTarget=ROLExyz
Regards,
Tanja -
The user's password must be changed before logging on the first time
Please, i have been battling with the message above and i have read similar postings all to no avail. I am trying to run Windows Server 2008 R2 in "Sun's Virtual box" and everything went well until i was prompted to enter a password. This is just my first
installation, and the virtual box is not password enabled. The host operating system is windows 7 ultimate 64bit which is password enabled but i have entered the password used for the host operating system and i will get this message "Unable to update the
password. The value provided for the new password does not meet the length, complexity of history requirement for the domain". The Windows Server was labelled "DC1" in the Sun Virtual box. I tried creating a password reset disk and i got the message "The password
you entered is incorrect for this user account. Please try again". At this point i don't know what else to do. Please, can anyone point me in the right direction.....please.
Thank you.On July 1st we will be making Windows Server 2008 R2 General forum read only. After receiving a lot of feedback from the community, it was decided that
this forum is a duplication and therefore redundant of the General Forum. So, until July 1st, we will start asking customers to redirect their questions to the General Forum. On June 11th, CSS engineers will move any new threads to the General Forum.
Please post a reply to the announcement thread if you have any feedback on this decision or the process. You can also email [email protected]
Shaon Shan TechNet Subscriber Support in forum If you have any feedback on our support, please contact [email protected] -
Cannot log into facebook - first time.
After having downloaded facebook, when I get to the section where I have to insert my email and password, I am getting a incorrect "e-mail / password" message?
Hi and Welcome to the Forums!
Well, given the error message, I'm not sure how to guide you...it is rejecting the Facebook credentials you are entering. Are you 100% positive they are correct? With BB keyboards, it is very easy to think you are typing one character but it actually is sending something completely different (e.g., alt, caps, num, etc.).
Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Logging on for first time.... having trouble!
We just purchased Adobe Photoshop Elements 10 from ebay. It was new in box and sealed. Upon installation, Adobe would not accept our information when we tried to create an account. Finally, we were somehow able to establish a user ID and password. However, when brought to the screen where you enter your birthday and URL, the button on the bottom right-hand corner ("update account") was not highlighted and I could not click on it. We have been unable to use our new Photoshop Elements and are very frustrated. If anyone knows of any way to help us, we would be greatly appreciative. Thank you!
I am sorry to inform that Ebay, is not an authorized reseller for the Adobe.
However, if you find difficulty in sign-in you can contact Adobe Support to fix the issue. -
Can we detect the user first time he logs in ( appln uses embedded ldap )
Hi,
We are using weblogic embedded ldap for authentication in our application
The first time the user logs in to our applicaiton, we need to detect he is log-in the first time,
so take him to change password page.
Can we do like that ?
Regards,
Harsha
Edited by: harsha.karthigai on Aug 28, 2009 5:50 AMHi,
By default when you open a report it displays the report exactly as it was last saved. So even if you user views the report
drills down
then closes the report without saving
then views the report immediately
the report will open in its original state. There is no setting which can be amended to change this. It is possible to write your own viewer but that would be a significant piece of work
Regards
Alan -
Used my girlfriends computer to start my iPad for the first time. I logged into my itunes account. Now the iPad has her iTunes account on it. How do I change it to mine.
You can log out of her account by tapping on the id on the right-hand side of Settings > Store and you can then log in with your id - is that what you want to do ?
-
Suspends fails the first time, but succeeds the second time
Hi all,
I am running Arch Linux on my Dell XPS 15 9530 laptop, and overall I am very happy with the combination. I have however had some issues with suspending.
The problem is that the first time I try to suspend the machine it seems to go to sleep, but then two seconds later it automatically wakes up again. If I then immediately try again to suspend, it works (it does not wake up automatically). Does anyone know what could be going on, and how this can be fixed?
Usually I suspend from my gnome 3 desktop, but I have also tried to suspend directly using 'systemctl suspend' without having an X server running, and the result is exactly the same. I have tried a few versions of the vanilla kernel, but also the linux-lts and the linux-ck images, but to no avail.
Here is the output from dmesg, where suspend fails:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.543 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 334.544 msecs
PM: late suspend of devices complete after 0.201 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.944 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.424 msecs
PM: early resume of devices complete after 0.091 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
PM: resume of devices complete after 2769.054 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
and here where suspend succeeds:
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
smsc75xx 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.412 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
smsc75xx 3-1:1.0 enp0s20u1: entering SUSPEND2 mode
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 780.265 msecs
PM: late suspend of devices complete after 0.387 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 26.988 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 73.411 msecs
PM: early resume of devices complete after 0.097 msecs
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
usb 3-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9a40
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
usb 3-1: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75180
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd751c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007fd75200
smsc75xx 3-1:1.0 enp0s20u1: resuming from SUSPEND2
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-9: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db040
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804181db080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451e80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417451ec0
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 3-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddc80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804174ddcc0
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
pciehp 0000:00:1c.0:pcie04: Link Training Error occurs
pciehp 0000:00:1c.0:pcie04: Failed to check link status
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 3-11: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804148f9440
PM: resume of devices complete after 2801.389 msecs
PM: Finishing wakeup.
Restarting tasks ...
iwlwifi 0000:06:00.0: no hotplug settings from platform
rtsx_pci 0000:07:00.0: no hotplug settings from platform
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
systemd[1]: Requested transaction contradicts existing jobs: File exists
systemd[1]: Service sleep.target is not needed anymore. Stopping.
smsc75xx 3-1:1.0 enp0s20u1: kevent 4 may have been dropped
smsc75xx 3-1:1.0 enp0s20u1: link down
smsc75xx 3-1:1.0 enp0s20u1: link down
It seems to me like the only real difference has to do with the xhci_hcd errors, perhaps the following:
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
Any input or help would be highly appreciated.Rexilion wrote:Maybe you could confirm your suspicion by rmmoding xhci before suspend and modprobing it after resume?
Thanks for the response. I should have said so, but I had already tried that, but without any luck. It seems like it doesn't change anything. -
Lion - startup fails first time, second time fine
So here's a weird issue… it started a week ago, every time I shut my Mac down and start, the first time it tries to start fails. I have FileVault enabled, so I enter my password, the grey screen appears, the wheel under the Apple logo starts spinning and after a while it just restarts. I enter my password again and it boots just fine.
But only the second time.
I tried verbose boot to see what's going on, but I don't really understand much of what it says. I took some pictures, I don't know if there's a startup log somewhere.
http://cl.ly/3J103V1q112h1L1Q3n3K
http://cl.ly/2n0Y3B1e0P382k1r3W2q
I just don't understand it, because the second time it always boots with no problem, but the first time the above happens. I unfortunately can't take it to a genius bar as there is no Apple Store in Brazil and my Portuguese isn't good enough to explain that to someone.g_wolfman wrote:
Are you using Parallels?
Wolfman, thats a good hint!
Additional info at --> http://reviews.cnet.com/8301-13727_7-20106682-263/macbook-airs-double-booting-wi th-parallels-and-filevault-enabled/
Thanks for the input.
Lupunus -
Logging Issue (First Time Error, Second attempt success)- Please help
Hi,
We have BO XI 3.1 SP2.We have developed a custom java sdk code for logging in. The code works in Dev and Test however the same code errors out when using another CMS name(Prod). Not quite sure how to troubleshoot the issue. Another note is first time when we pass the login values (System Name, User Id, Pass, Auth) it errors out and second time it logs in fine. This happens every time start of the application.
Here is the code that i am using and for the first time it gives the error message "Sorry - you could not be logged on to this server." +
" Ensure that your user name and password, as well as the CMS name are correct" and when logs in second time it works fine..!
String cms = CMS Name
if (cms.equals("localhost"))
response.sendRedirect("../loginForm.jsp?strError=localhost");
String username = request.getParameter("User");
String password = request.getParameter("Password");
String auth = secLDAP;
enterpriseSession = sm.logon(username, password, cms, auth);
// If the login failed, redirect the user to the start page.
out.printlnn("<SCRIPTt language=\"javascript\"> " +
" alert t(\"Sorry - you could not be logged on to this server." +
" Ensure that your user name and password, as well as the CMS name are correct." +
"\");</SCRIPTt>");
//it will return the login page... unable to attach the code as it is not saving...META HTTP-EQUIV='refresh' CONTENT='0;URL=/CI'
return;
Edited by: Paul Dasari on Nov 29, 2010 2:13 PM
Edited by: Paul Dasari on Nov 29, 2010 2:14 PM
Edited by: Paul Dasari on Nov 29, 2010 2:21 PMHi Ted,
Yes we do have Support and we are working with them to identify the root cause. Still no luck so far!!!
No. It does not redirect to Infoview page,once the logon is completed it redirects to a product selection screen from there it uses an open document to view webi report.
We have tried clearing all the cookies, history, temp files everything and start with a new browser the issue still remains. Well the logon page writes cookies however it does only when it can create an Enterprise Session.
Yes the Prod Environment is at SP2 Level. The Prod has been set up the same way as Dev and Test. Well the same code works in both the environments. Unsure how to troubleshoot to identify the root cause.
Any thoughts is greatly appreciated.
Thanks
Paul -
When initiating back-up of my 3GS to icloud for the first time, I repeatedly receive an error message reading:
"iCloud backup failed
There was a problem enabling iCloud backup"
I cannot find a solution to this problem amd no amount of checking and rechecking account settings etc. has made any difference. Does anyone have experience of how to overcome this issue. The iCloud back-up initiated on my iPad without any problem so I do not think the problem is account related.
Thanks.Same problem here...
I just upgraded my 3GS to iOS5 and signed into iCloud using my Apple ID...
Every time I click "Back Up Now" in the iCloud preferences on the iPhone, I get "There was a problem completing the backup. Please try again later."
On my wife's iPhone 4, I just performed a back up and there were no errors. I tried this also on my wife's iPad 2 and it worked perfectly.
I have tried the following:
1. In iTunes, when my phone is connected, I selected "Back up to iCloud" on the summary tab
2. Reset my phone using the steps in the above post
3. Deleted the iCloud account on my iPhone and logged in again
4. Tried to backup from 3 different wireless networks
None of the steps above fixed the issue which has been going on all day for me...
Any other help would be great - thanks! -
I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
Now I also have a macbook where I can sync my iphone but it doesn't allow mefirst of all only sync it with 1 computers itune account
second settings->general->store click the appleID box with her appleID in it and log out -
I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.
Maybe you are looking for
-
HT201195 How to remove credit card info from Apple ID profile
How do you remove credit card information from your iTunes profile?
-
ITunes Freezes/Crashes On MacBook Pro When Connecting iPad
iTunes (v10.7) crashes on my new MacBook Pro Retina (OSX 10.8.2) almost all the time when I connect my iPad Retina (IOS 6.0.1). When i connect via USB, iTunes comes up but the iPad does not appear as a recognizable device. This problem started about
-
What's This? Help in Webhelp?
I'm in the process of bringing a FrameMaker book through RoboHelp. The FrameMaker book is basically an instruction manual / user guide for a software program. Previously, this software has utilized your basic HTML Help, compiled with an HTML Help edi
-
IMac (Late 2008) (8,1) (20") Shuts Down Unexpectedly
Hello everyone, here's my problem: Every know and then my iMac (Late 2008) 8,1 20" shuts down unexpectedly, more than once. And usually happens when I'm stressing the computer by clicking on things or just at random times. The computer however seems
-
Why my iMac just quits just anytime?
My iMac quits at any time it has done that twice this month