Logged in VPN can't access DMZ from internal

Hello my name is Jason logged in under my bosses account.
What I got is a 5505 ASA firewall and I'm connected to it via VPN. I'm pulling an 192.168.169.x address because that's what we set their company's internet LAN to. Which is what we want. What I can't do while I'm VPN'd in is ping from the internet network to the DMZ, and the same when I try and ping from the DMZ to the internal network.
The DMZ is on a 196.0.0.x network
The internet network is 192.168.169.x network.
I don't need them to have internet access on the DMZ I just want to be able to access it from the internal network. What is going on is we need them to be able to VPN into the DMZ and access their equipment. At this point it would just make me happy to be able to ping from the internal network to the DMZ and I can figure it out from there I've setup rules and applied them and when I wasn't having success I referred back to defaults. Right now the rules are set at default, any thing in and anything out, on both internal and DMZ. I'm using a VPN client and going through Cisco ASDM Launcher to setup the rules and static routes, I haven't done anything with the command line. All the research I've done everyone does it command line, I find it easier to do it GUI. I have spent my whole day looking and I finally decided to put up a post and see if I can get any support. Please respond as soon as possible. This is my first time working with an ASA firewall.
Thank you,
Jason

192.168.169.x is their internal lan ip address. When I login with the VPN client I get a 192.168.169.x address. That address is coming from the ASA firewall in place. I need to be able to get that network to talk to 196.0.0.x network which is our DMZ.
You are correct too by the way. I do need to be able to access the DMZ via VPN, in which the clients are coming from the outside world.

Similar Messages

VPN Clients can't access DMZ Network

Hello,
I will try to describe my problem as best as possible. The title says VPN clients cannot access DMZ network, but that is not exactly the problem, the situation is this, a group of users are using an actual 10.x network where they have their servers and pretty much everything. The users must be relocated into a new network, the 172.16.x. In a point in time they will not have to use 10.x anymore, but meanwhile, they need access to that network.
I have an ASA 5510 as default gateway for the new network (172.16.x.x), one interface e0/0 connected to the outside (internet), interface e0/1 to the inside and other interface connected to the actual 10.x (which I call DMZ), so basically I am using the ASA as a bridge using NAT to grant access to the users in the network 172.16.x to the resources in the 10.x network while the migration is completed.
All the users must use the path to the internet thru the ASA using the NAT overload to the outside interface and I put in place a NAT policy to 10.x to allow access to the 10.x network only when the internal users 172.16.x try to reach that path and so far, everything is working just fine for the internal users.
Now for some reason, when I do VPN, the VPN clients cannot reach the 10.x network, even when they are supposed to be in the internal network (because they are doing VPN right?) .
I have enabled split tunneling with NAT exempt the 172.16 network and I am not sure if that is causing the problem, because when I trace from my PC the 172.16.16.1 address using the VPN I get the proper route path, but when I try to reach 10.x, my PC is using its default gateway and not the VPN gateway which has a route to 10.x.
I’m not even sure if what I am trying to do is possible, I want VPN users to be able to access a 10.x network using NAT overload with the Interface of the ASA plugged to the 10.x network, just like the internal users are doing right now.
Any help or advice will be highly appreciated.

Allow clients to access DMZ, add exempt NAT rule, add both the "same-security-traffic" thru cli. Please give it a try.
Sent from Cisco Technical Support iPad App

I installed Firefox on laptop under Admin acct--now I can't access it from std user account

I installed Firefox on a laptop under Admin acct--now I can't access it from std user account. If I installed Firefox onto the laptop under the Admin account, why didn't it put a desktop icon on the std user account also? I don't recall ever having this problem on an any other computer I've had. I have already tried looking under the program files folders for a Mozilla folder while logged into the std user account-- there is no Mozilla folder to be found. Also, when I try to install Firefox on the Std user account, the parental controls keeps me from doing it. I have went in and added the Firefox install web link as an allowable website under the parental controls, but it does not help. Please help me figure out how to get Firefox installed on my std user account.

Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details to expand this section. If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

HT1766 I deleted some phone records (call numbers, dates) & texts. Can I access them from back-up without restoring the phone. Don't want to alter what I have, just find what I later deleted

I deleted some phone records (call numbers, dates) & texts. Can I access them from back-up without restoring the phone. Don't want to alter what I have, just find what I later deleted

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

Can i access apps from itunes on my pc

can i access apps from itunes on my pc?
I want to download my apps to my pc so I can clear some space on my iphone 4.
Then I can use the space for other things e.g music.
However at a later date I would like to access these apps and the data they have stored using my PC
Is this possible?
Or is this just another Mac problem?

Most apps will store their data locally on the device. This can be restored from a backup when restoring the device, but if you remove the app any data associated with it is removed, and then subsequently purged from the device's rolling backup set on the next backup. If the app supports iTunes File Sharing you may be able to export its data to your computer, then reimport at a later date when you add the app back to your device.
tt2

How can I access iMessages from iTunes backup?

I backed up my iPhone since I needed to backup a really large iMessage conversation and I read this was a way to do it
Now I want to access it from my computer
how can I do this?

Anindan wrote:
how can i access sms from itunes back up
You will need a Backup Extractor program; there are many available. I use iScavenge for Mac, but there are many more. https://duckduckgo.com/?q=iphone+backup+extractor The one at the top of the search claims to be free, but it is not. Don't be fooled. I can't recommend for or against any of them, except iScavenge, which is OK.
If you are technically inclined the backup is a SQLite database, so a SQLite browser can also open the backup.

Can I access music from multiple accounts on one cpu?

Can I access music from multiple accounts on one cpu

Here's one option: http://support.apple.com/kb/PH12366
But frankly you'd be better off creating unique user accounts on the computer and having seperate iTunes libraries for each user as described here: http://support.apple.com/kb/ht1495

How can i share my network from timecapsule to other devices. The thing is i can use access internet from my macbook only.

I have recently got a Time Capsule with my Macbook pro retina 15". I am trying to setup my time capsule as a wifi station at my home. But the thing is I can only access wifi from my lap only.
How can I share my network from timecapsule to other devices, and im using OS X 10.8.2
Please help me!
Thanks in advance!
(sorry for the bad english)

How is the TC currently connected into the network?
It should work fine in bridge and create a wireless network.. it should already be able to share the network without being the main router.
Setting up wireless from wireless is difficult.
I would recommend you buy the USB to ethernet cable Apple sell as an accessory for Air and MBPr so you can actually use ethernet when required.

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents. I have repaired permissions pn the main harddrive. When I try too click on a disk I get the previously stated error. I can't even open up information to see what permission/access there is. It simply will not let me see the content. It shows the content of my main hard drive when I have clicked the other harddrive's name.

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

How can i access filename from file (sender)

hi All,
can anybody tell me
how can i access filename from file (sender)?
thank u
swari

See:
"SAP NetWeaver XI: Variable Substitution with Adapter-Specific Message Attributes via DynamicConfigurationBean"
SAP NetWeaver XI: Variable Substitution with Adapter-Specific Message Attributes via DynamicConfigurationBean
"Accessing Adapter-Specific Attributes through User Defined Function"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516

How can I access images from IPhoto on my Mac to Photoshop CS6

How can I access images from IPhoto library on my Mac to Photoshop CS6? I enable jpg with format "Photoshop" and this is what comes up - "Could not complete your request because Photoshop does not recognize this type of file"

MountainArtist wrote:
…I enable jpg with format "Photoshop" and this is what comes up - "Could not complete your request because Photoshop does not recognize this type of file"
Photoshop is not a format. It's an application.
What you are looking at are not true JPEGs, just iPhoto's "tease" representations of the hidden images it swallowed, as explained above.

I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.

Can't access photos from prior tobut 1/27/10. Thu ide to desktop. Giant "!" appears.

Can't access photos from prior to 1/27/11. Thumbnails appear, but can't open, email or move them to desktop. Giant "!" appears.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/">iPhoto Library Manager</a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Logged in VPN can't access DMZ from internal

Similar Messages

Maybe you are looking for