Logging for Router 1760

can any1 pls help... i stuck in create logging for my router. i wish to log all the host connected to my router throught SSH. My router only allow ssh or console.

hi
few posts already been here in netpro about ssh ,the H/W platform may vary depending on case to case....
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd91fb2/0
http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=jswaxxoax1.SJ3B?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd91d30
would suggest to give a search over here too which will also yield a lot for u..
regds

Similar Messages

  • Syslog - seperate log for router output ?

    I've got logging enabled on my Mavericks server and everything is being written to system.log.
    I've set my MAC syslog server as the remote log server for my network router and this is working fine, but everything is being written to system.log, Ideally I'd like it to go to /var/log/router.log
    I've created the router.log, and set the ownership (root:admin) and permissions (777), but how do I send just the router logs to that log file ?
    The logs looks similar to this :
    Mon Apr 28 08:48:10 2014: <12>Apr 28 08:48:00 kernel: DROP IN=ppp0 OUT= MAC= SRC=203.58.25.11 DST=80.xxx.xx.xx LEN=131 TOS=0x00 PREC=0xA0 TTL=107 ID=96 PROTO=UDP SPT=29604 DPT=50976 LEN=111 
    Mon Apr 28 08:48:12 2014: <12>Apr 28 08:48:01 kernel: DROP IN=ppp0 OUT= MAC= SRC=88.195.144.252 DST=80.xxx.xx.xx LEN=52 TOS=0x00 PREC=0xA0 TTL=114 ID=17397 DF PROTO=TCP SPT=63285 DPT=50976 SEQ=294340858 ACK=0 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B40103030201010402) 
    Mon Apr 28 08:48:12 2014: <12>Apr 28 08:48:01 kernel: DROP IN=ppp0 OUT= MAC= SRC=113.201.73.109 DST=80.xxx.xx.xx LEN=126 TOS=0x00 PREC=0x20 TTL=45 ID=10052 PROTO=UDP SPT=34680 DPT=50976 LEN=106
    But there are other entries like:
    Mon Apr 28 09:08:48 2014: <30>Apr 28 09:08:37 dnsmasq-dhcp[228]: DHCPDISCOVER(br0) aa:ad:bb:11:cc:dd
    Mon Apr 28 08:59:15 2014: <30>Apr 28 08:59:05 pptpd[1773]: CTRL: Starting call (launching pppd, opening GRE)
    Mon Apr 28 08:59:15 2014: <30>Apr 28 08:59:05 pptp[1774]: Plugin pptp.so loaded.
    The logs don't show the router name or IP Address, so is the syslog intelligent enough to allow me to log from a specific IP Address or is there some other method. ?
    I've read I should use asl.conf, but I'm not sure what to configure to make this work correctly.
    Any help or advice would be gratefully received :-)
    Thanks

    Thanks for the link.
    I looked at the raw syslog output to find the host and I've added the following to my asl.conf:
    ? [A= Host kernel:] file /var/log/router.log file_max=5M all_max=50M
    ? [A= Host kernel:] ignore
    ? [A= Host pptp] file /var/log/router.log file_max=5M all_max=50M
    ? [A= Host pptp:] ignore
    ? [A= Host pptpd] file /var/log/router.log file_max=5M all_max=50M
    ? [A= Host pptpd:] ignore
    restarted com.apple.syslogd.plist and now the logs are going to router.log.
    Couple of questions.
    The logs are still going to system.log as well, how do I stop that ? I assumed the ignore would do that..
    The log shows as :
    Apr 29 12:41:12 kernel: Unknown <Warning>: DROP IN=ppp0 OUT= MAC= SRC=110.200.88.19 DST=80.xxx.xxx.xxx LEN=129 TOS=0x00 PREC=0xA0 TTL=40 ID=5080 PROTO=UDP SPT=20884 DPT=50976 LEN=109
    Previously there wasn't the <Warning> in the log. Anyway to remove that ?
    Thanks

  • Tables for Router number and pcc required in ECC

    Hi,
    I want to know the Route number created by the system in ECC
    1. my input will be material/plant. i need group Number, Group counter . Please let me know which table this is getting stored?
    2. I have created product cost collector for this material/plant combination. which table this PCC is stored?
    Thanks
    Sakthi.K

    Dear Sakthi ,
    1) For Routing details use the below tables.
    Routings/operations
    MAPL                    Allocation of task lists to materials
    PLAS                    Task list - selection of operations/activities
    PLFH                    Task list - production resources/tools
    PLFL                    Task list - sequences
    PLKO                    Task list - header
    PLKZ                    Task list: main header
    PLPH                    Phases / suboperations
    PLPO                    Task list operation / activity
    PLPR                    Log collector for tasklists
    PLMZ                    Allocation of BOM - items to operations
    2) For Product costing use the below tables.
    KEKO               Product-costing header
    KEPH               Cost components for cost of goods manuf.
    KALO               Costing objects
    KANZ               Sales order items - costing objects
    Hope it will be helpful.
    Regards,
    Vijay.

  • No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.

    I start noticing that I do not see any denied traffic coming in on my ACL.  To better explain, lets say I have this config.
    ### Sample Config ###
    object network webserver
    host 192.168.1.50
    nat (dmz, outside) static X.X.X.X service tcp www www
    access-list inbound extended permit ip any4 object webserver eq www
    If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
    Phase: 1
    Type: CAPTURE
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    MAC Access list
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    MAC Access list
    Phase: 3
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         Outside
    Result:
    input-interface: Outside
    input-status: up
    input-line-status: up
    output-interface: Outside
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
    Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
    My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version? 
    Any comments/suggestions are gladly appreciated :)
    Regards,
    John

    I believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done.  In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched.  So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
    As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either.  My guess is that there is no way around this...at least no way I know of.
    Please remember to select a correct answer and rate helpful posts

  • Error in LSMW for routing,.

    i am getting ths error whiled assigning materials to operations, for Routing PP.
    You cannot edit the task list object with activity type.
    i am using direct input  to upload routing material assignment to operation and this is my structure.
    my source structure
    GRP
    GRPCT
    OPERAT
    ALTNATIVEBOM
    HEAMEA
    PLANT
    MATER

    Hi,
    Check in log details why it is not updated and also you can run session foreground errors only.
    Regards
    Md.MahaboobKhan

  • User exits for route determination in Sales order & Deliver creation

    Hi Gurus,
    I need to do some change in the route determination for both sales order & Delivery creation.
    Can anyone suggest me which user exit I have to use.
    Appropriate answers will be awarded.

    Hi,
    You can use the following exit for route determination - EXIT_SAPL0VRF_001.
    The FM documentation is below. Check the functionality:
    "The customer exit can be used for customer-specific route determination or to modify the inbound data for the company's own route determination.
    The following data is transferred to support customer-specific route determination:
    I_VBAK current order header (for route determination in sales order)
    I_VBKD order business data (for route determination in sales order)
    I_VBAP current order item (for route determination in sales order)
    I_VBPA current sales partner
    I_LIKP current delivery header (for route determination in delivery)
    The following data can be modified and transferred back to the standard route determination or used for a specific route determination:
    C_ALAND Country of departure
    C_AZONE Departure zone
    C_LLAND Destination country
    C_LZONE Receiving zone
    C_VSBED Shipping condition
    C_TRAGR Transportation group
    C_GRULG Weight group
    C_FLAG_GEN_VT Flag: Route determination with generic shipping
    requirements/transportation group.
    C_FLAG_INCR_GRULG Flag: Increase weight group if no route
    If you want to use a standard route determination with different parameters, trigger the exception 'CONTINUE_WITH_STANDARD'.
    In the log table C_PROT, the log data from the customer-specific route determination can be transferred back. In this case, the log entries always refer to customer-specific messages. To add a message to the log table, the function module SD_ROUTE_DET_LOG can be used (see below).
    If a route is determined in the customer-specific route-determination, it can be transferred back in the E_ROUTE field. If no route was found, the exception 'NO_ROUTE_FOUND' is to be triggered."
    Thanks.

  • Change Logs for TCODE -- FILE

    Hi Friends,
        Please help me in finding the change logs  for the TCODE  FILE,
        i.e  The changes made to the Logical paths
       I had tried  Utilities---->change logs , but unfortunately i cannot find any changes logs
       But there are changes made to the logical paths in my system but i cannot see them in change logs
    thanks
    chandrasekhar j

    rec/client is a profile parameter, you can view the settings in transaction RZ10.  However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value.  Also if you double-click on a parameter you can get to the full help text for its meaning.
    The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
    Hope this helps.
    Nick

  • When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    When i tried to install DownloadHelper this happened Firefox could not install the file at
    https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
    because: Unexpected installation error
    Review the Error Console log for more details.
    -203
    , how do i check the log and how do i resolve this problem? thank you
    == This happened
    ==
    Just once or twice
    == today
    ==
    == Troubleshooting information
    ==
    Application Basics
    Name
    Firefox
    Version
    3.6.3
    Profile Directory
    Open Containing Folder
    Installed Plugins
    about:plugins
    Build Configuration
    about:buildconfig
    Extensions
    Name
    Version
    Enabled
    ID
    Ask Toolbar for Firefox
    2.1.0.5
    true
    AVG Safe Search
    9.0.0.783
    true
    {3f963a5b-e555-4543-90e2-c3908898db71}
    Java Console
    6.0.17
    true
    Microsoft .NET Framework Assistant
    1.1
    true
    {20a82645-c095-46ed-80e3-08825760534b}
    BitDefender Antiphishing Toolbar
    2.0
    true
    [email protected]
    Modified Preferences
    Name
    Value
    accessibility.typeaheadfind.flashBar
    0
    browser.places.smartBookmarksVersion
    2
    browser.startup.homepage_override.mstone
    rv:1.9.2.3
    extensions.lastAppVersion
    3.6.3
    general.useragent.extra.microsoftdotnet
    (.NET CLR 3.5.30729)
    network.cookie.prefsMigrated
    true
    places.last_vacuum
    1276351876
    print.print_printer
    HP Photosmart D5300 series
    print.printer_HP_Photosmart_D5300_series.print_bgcolor
    false
    print.printer_HP_Photosmart_D5300_series.print_bgimages
    false
    print.printer_HP_Photosmart_D5300_series.print_command
    print.printer_HP_Photosmart_D5300_series.print_downloadfonts
    false
    print.printer_HP_Photosmart_D5300_series.print_edge_bottom
    0
    print.printer_HP_Photosmart_D5300_series.print_edge_left
    0
    print.printer_HP_Photosmart_D5300_series.print_edge_right
    0
    print.printer_HP_Photosmart_D5300_series.print_edge_top
    0
    print.printer_HP_Photosmart_D5300_series.print_evenpages
    true
    print.printer_HP_Photosmart_D5300_series.print_footercenter
    print.printer_HP_Photosmart_D5300_series.print_footerleft
    &PT
    print.printer_HP_Photosmart_D5300_series.print_footerright
    &D
    print.printer_HP_Photosmart_D5300_series.print_headercenter
    print.printer_HP_Photosmart_D5300_series.print_headerleft
    &T
    print.printer_HP_Photosmart_D5300_series.print_headerright
    &U
    print.printer_HP_Photosmart_D5300_series.print_in_color
    true
    print.printer_HP_Photosmart_D5300_series.print_margin_bottom
    0.5
    print.printer_HP_Photosmart_D5300_series.print_margin_left
    0.5
    print.printer_HP_Photosmart_D5300_series.print_margin_right
    0.5
    print.printer_HP_Photosmart_D5300_series.print_margin_top
    0.5
    print.printer_HP_Photosmart_D5300_series.print_oddpages
    true
    print.printer_HP_Photosmart_D5300_series.print_orientation
    0
    print.printer_HP_Photosmart_D5300_series.print_pagedelay
    500
    print.printer_HP_Photosmart_D5300_series.print_paper_data
    9
    print.printer_HP_Photosmart_D5300_series.print_paper_height
    11.00
    print.printer_HP_Photosmart_D5300_series.print_paper_size_type
    0
    print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
    1
    print.printer_HP_Photosmart_D5300_series.print_paper_width
    8.50
    print.printer_HP_Photosmart_D5300_series.print_reversed
    false
    print.printer_HP_Photosmart_D5300_series.print_scaling
    1.00
    print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
    true
    print.printer_HP_Photosmart_D5300_series.print_to_file
    false
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
    0
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
    0
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
    0
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
    0
    privacy.sanitize.migrateFx3Prefs
    true
    security.warn_viewing_mixed
    false
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows Vista
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
    == Plugins installed
    ==
    *-npdivxplayerplugin
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *NPRuntime Script Plug-in Library for Java(TM) Deploy
    *6.0.12.732
    *RealPlayer(tm) LiveConnect-Enabled Plug-In
    *RealJukebox Netscape Plugin
    *Shockwave Flash 10.0 r45
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *DivX Web Player version 2.0.0.254
    *GEPlugin
    *4.0.50524.0
    *Office Live Update v1.4
    *NPWLPG
    *Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
    *RealPlayer(tm) HTML5VideoShim Plug-In
    *Google Update
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    Mark Leary:
    As TXGuy posted above:
    See:
    https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
    http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
    Also see:
    http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
    http://kb.mozillazine.org/Show_hidden_files_and_folders

  • One or more post-processing actions failed. Consult the OPP service log for details.

    hi expert plz help me i can't understand here what can i do to resove this error.
    here is the logfile details of output post processor
    ebs- 11i (11.5.10.2)
    os - rhel 4
    [9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
    [9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
    [9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
    [9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
    [9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
    [9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
    [9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
    [9/2/13 4:59:35 PM] [2984174:RT21672063]
    Template code: PURCHASE_REGISTER_ITEMWISE
    Template app:  CONA
    Language:      en
    Territory:     00
    Output type:   PDF
    [090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
    [090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
    [090213_045936408][][EXCEPTION] [DEBUG]  [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
    [090213_045936408][][EXCEPTION] [DEBUG]  [SECURITY_GROUP_ID]:[0]
    [090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
    [090213_045936408][][EXCEPTION] [DEBUG]  [NLS_CHARACTERSET]:[US7ASCII]
    [090213_045936408][][EXCEPTION] [DEBUG]  [RESP_APPL_ID]:[-1]
    [090213_045936408][][EXCEPTION] [DEBUG]  [NLS_LANGUAGE]:[AMERICAN]
    [090213_045936408][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MIN]:[1]
    [090213_045936409][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MAX]:[2]
    [090213_045936409][][EXCEPTION] [DEBUG]  [NLS_NUMERIC_CHARACTERS]:[.,]
    [090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
    [090213_045936409][][EXCEPTION] [DEBUG]  [RESP_ID]:[-1]
    [090213_045936409][][EXCEPTION] [DEBUG]  [FND_MAX_JDBC_CONNECTIONS]:[500]
    [090213_045936410][][EXCEPTION] [DEBUG]  [FND_JDBC_USABLE_CHECK]:[false]
    [090213_045936410][][EXCEPTION] [DEBUG]  [USER_ID]:[-1]
    [090213_045936410][][EXCEPTION] [DEBUG]  [NLS_TERRITORY]:[AMERICA]
    [090213_045936410][][EXCEPTION] [DEBUG]  [FND_JDBC_PLSQL_RESET]:[false]
    [090213_045936410][][EXCEPTION] [DEBUG]  [FND_JDBC_CONTEXT_CHECK]:[true]
    [090213_045936418][][EXCEPTION] [DEBUG]  [NLS_DATE_FORMAT]:[DD-MON-RR]
    [090213_045936418][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
    [090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
    [090213_045936418][][EXCEPTION] [DEBUG]  [NLS_SORT]:[BINARY]
    [090213_045936418][][EXCEPTION] [DEBUG]  [NLS_DATE_LANGUAGE]:[AMERICAN]
    [090213_045936419][][EXCEPTION] [DEBUG]  [LOGIN_ID]:[-1]
    [090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
    [090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
    [090213_045936419][][EXCEPTION] [DEBUG]  [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
    [090213_045936419][][EXCEPTION] [DEBUG]  [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
    [090213_045936419][][EXCEPTION] [DEBUG]  [java.vm.version]:[1.4.2_04-b05]
    [090213_045936419][][EXCEPTION] [DEBUG]  [OVERRIDE_DBC]:[true]
    [090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
    [090213_045936419][][EXCEPTION] [DEBUG]  [java.vm.vendor]:[Sun Microsystems Inc.]
    [090213_045936420][][EXCEPTION] [DEBUG]  [java.vendor.url]:[http://java.sun.com/]
    [090213_045936420][][EXCEPTION] [DEBUG]  [path.separator]:[:]
    [090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
    [090213_045936420][][EXCEPTION] [DEBUG]  [java.vm.name]:[Java HotSpot(TM) Client VM]
    [090213_045936420][][EXCEPTION] [DEBUG]  [file.encoding.pkg]:[sun.io]
    [090213_045936420][][EXCEPTION] [DEBUG]  [user.country]:[US]
    [090213_045936420][][EXCEPTION] [DEBUG]  [sun.os.patch.level]:[unknown]
    [090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
    [090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
    [090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
    [090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
    [090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
    [090213_045936421][][EXCEPTION] [DEBUG]  [os.arch]:[i386]
    [090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
    [090213_045936421][][EXCEPTION] [DEBUG]  [java.io.tmpdir]:[/tmp]
    [090213_045936422][][EXCEPTION] [DEBUG]  [line.separator]:[
    [090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
    [090213_045936422][][EXCEPTION] [DEBUG]  [os.name]:[Linux]
    [090213_045936422][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MIN]:[1]
    [090213_045936422][][EXCEPTION] [DEBUG]  [cpid]:[2984174]
    [090213_045936422][][EXCEPTION] [DEBUG]  [sun.java2d.fontpath]:[]
    [090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
    [090213_045936423][][EXCEPTION] [DEBUG]  [java.specification.name]:[Java Platform API Specification]
    [090213_045936423][][EXCEPTION] [DEBUG]  [java.class.version]:[48.0]
    [090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
    [090213_045936423][][EXCEPTION] [DEBUG]  [os.version]:[2.6.9-82.ELsmp]
    [090213_045936424][][EXCEPTION] [DEBUG]  [LONG_RUNNING_JVM]:[true]
    [090213_045936424][][EXCEPTION] [DEBUG]  [user.home]:[/home/appdemo]
    [090213_045936424][][EXCEPTION] [DEBUG]  [user.timezone]:[GMT+05:30]
    [090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
    [090213_045936424][][EXCEPTION] [DEBUG]  [file.encoding]:[ANSI_X3.4-1968]
    [090213_045936424][][EXCEPTION] [DEBUG]  [java.specification.version]:[1.4]
    [090213_045936424][][EXCEPTION] [DEBUG]  [CACHEMODE]:[DISTRIBUTED]
    [090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
    [090213_045936424][][EXCEPTION] [DEBUG]  [user.name]:[appdemo]
    [090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
    [090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
    [090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
    [090213_045936425][][EXCEPTION] [DEBUG]  [sun.arch.data.model]:[32]
    [090213_045936425][][EXCEPTION] [DEBUG]  [user.language]:[en]
    [090213_045936425][][EXCEPTION] [DEBUG]  [java.specification.vendor]:[Sun Microsystems Inc.]
    [090213_045936425][][EXCEPTION] [DEBUG]  [java.vm.info]:[mixed mode]
    [090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
    [090213_045936425][][EXCEPTION] [DEBUG]  [java.version]:[1.4.2_04]
    [090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
    [090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
    [090213_045936426][][EXCEPTION] [DEBUG]  [java.vendor]:[Sun Microsystems Inc.]
    [090213_045936426][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MAX]:[2]
    [090213_045936426][][EXCEPTION] [DEBUG]  [file.separator]:[/]
    [090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
    [090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
    [090213_045936426][][EXCEPTION] [DEBUG]  [sun.cpu.endian]:[little]
    [090213_045936426][][EXCEPTION] [DEBUG]  [APPLOUT]:[out/ORIDEMO_demo]
    [090213_045936427][][EXCEPTION] [DEBUG]  [sun.cpu.isalist]:[]
    [9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
            at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
            at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
            at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
            at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
            at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
            at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
    Caused by: java.io.UnsupportedEncodingException: &Encoding
            at sun.io.Converters.getConverterClass(Converters.java:215)
            at sun.io.Converters.newConverter(Converters.java:248)
            at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
            at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
            at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
            at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
            at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
            at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
            at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
            ... 17 more
    [9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
    [9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
    [9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
    [9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
    [9/2/13 5:10:51 PM] [2984174:RT21672114]
    Template code: PURCHASE_REGISTER_ITEMWISE
    Template app:  CONA
    Language:      en
    Territory:     00
    Output type:   PDF
    [9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
            at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
            at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
            at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
            at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
            at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
            at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
    Caused by: java.io.UnsupportedEncodingException: &Encoding
            at sun.io.Converters.getConverterClass(Converters.java:215)
            at sun.io.Converters.newConverter(Converters.java:248)
            at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
            at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
            at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
            at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
            at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
            at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
            at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
            ... 17 more
    [9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
    thaks
    pritesh

    hi experts
    thanks for ur replay,
    this issue is occured with only the particular request and this is custom report. i try some step
    down the manager run the cmclean.sql, increease the  processes of output postprocessor but not get the any type of effect on issue...
    and also follow the step that describe in the below doc:
    Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
    To Bottom
    request log file details below:
    +---------------------------------------------------------------------------+
    CONA Custom: Version : UNKNOWN - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
    +---------------------------------------------------------------------------+
    Current system time is 02-SEP-2013 17:10:29
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_SEGM='02'
    P_CHART_OF_ACCOUNTS_ID='50268'
    p_from_date='2012/04/01 00:00:00'
    p_to_date='2012/04/05 00:00:00'
    P_YES_NO='No'
    XML_REPORTS_XENVIRONMENT is :
    /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    _AMERICA.UTF8
    Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
    (c) Copyright 1999 Oracle Corporation.  All rights reserved.
    Enter Username:
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    +------------- 1) PUBLISH -------------+
    Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
    Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    +--------------------------------------+
    +------------- 2) PRINT   -------------+
    +--------------------------------------+
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 02-SEP-2013 17:10:52
    +---------------------------------------------------------------------------+
    i check the document that u all suggest above after that i update u as soon as possible..
    thanks & regards
    pritesh ranjan

  • Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

    Hi all,
    I have TFS2012 and run several projects.
    We encounterwed with such an error while using Build server.
    Overall Build Process
    Initial Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    00:00
    Get the Build
    00:00
    Update Build Number
    Initial Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Final Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Result = Ephone_DIT_Deploy_20150424.1
    01:56
    Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
    Initial Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    00:00
    Get the Build Directory
    Initial Property Values
    Result = d:\temp\217\CTI\Ephone_DIT_Deploy
    01:53
    If Not String.IsNullOrEmpty(ConfigurationFolderPath)
    Initial Property Values
    Condition = True
    01:53
    Run TfsBuild for Configuration Folder
    Initial Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp" 
    00:08
    Getting sources
    00:02
    Labeling sources
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
    00:19
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:10
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    MSBuild Log File
    00:08
    Generating list of changesets
    00:20
    Built Skins\SkinEPhone.cs for default targets.
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
    Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
       at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
    00:03
    Creating work item
     Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
    Exception Stack Trace:    at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Final Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    Final Property Values
    Condition = True
    Final Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
    Final Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    Please have a look and guide where to find a problem
    Thanks ahead

    Hi Hooi,
    I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
    From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
    Best regards,

  • Need help to enable trace/logging for java debugging CRM 5.0 WebShop

    Dear experts,
    I'm new to sap, and i'm working on CRM 5.0 WebShop J2ee application with nwdi.
    I have to add a new functionnality, which has to call a custom FM in CRM. This FM has been tested and is OK.
    I have read the 2 files SAP_ISA50_DevAndExtGuide.pdf and ISA50_DevAndExtTuts_v1_0.pdf which have explain to me the process flow and organization of the framework.
    By helping me with the tutorials, I wrote all the files for my functionnality, from the jsp with the form, to the custom business backend with the call of the FM with parameters and JCo connection. (+ custom BOM, custom BO, BE interface, BE CRM implementation)
    Everything builds without error, and I deploy the application on my test env.
    Then I go to my webapp, I call the custom jsp with form, I put values, then I validate the form, but my FM is not called, and I don't know where is the problem, because I can't see a trace of the process flow, to know where is the error.
    By searching in this forum I found 2 notes that explain how to activate debug trace for all the application, one note for systems before SP11 and another for systems with SP11 and higher. But I don't know how to see the patchlevel of the system (I went to system information of the j2ee server and the on ly thing I can notice is below the server0 properties : Kernel Version:  7.00 PatchLevel.
    In these notes I read about Visual Administrator : I found this directly on the server with remote desktop, but the progress bar at the bottom of the window don't arrives to 100% and I can't see the properties and values of the parameters for the Log.
    I went to XCM too, and set appinfo and logfiledownload to true, then went to Logging into e-commerce administration console : in the Log configuration tab, I can create new configurations but the effective severity automatically sets to error, even if I set All or Debug manually ; in the session log tab, i tried to launch the application, then start log, then validate my form, then stop log, but I can't find anything about the trace of the process flow in the generated file.
    Please help, I have to finish this for end of week and I'm alone ...
    PS I'm french, and don't speak very well English please excuse me.
    Thank you very much.
    J. Lag.

    Hi
    For logs follow this note no[Creation of logs for B2B and B2C Release 5.0|https://service.sap.com/sap/support/notes/1090753]
    Follow this code for calling custom Function Module
    1) ZBOM.java
    public class ZBOM extends DefaultBusinessObjectManager implements BOManager, BackendAware {
    public static final String ZCUSTOM_BOM = "ZCUSTOM-BOM";
    private ZFunction func;
    public ZBOM() { }
    public ZFunction getFUNC() {
      if (func== null) {
       func= new ZFunction();
       assignBackendObjectManager(func);  }
      return func; }
    public void release() { }
    2) ZFUNCTION.java
    public class ZFunction extends BOBase implements BackendAware {
    private ZInterface backendInterface;
    private BackendObjectManager bem;
    private ZInterface getInterface() {
      if (backendInterface == null) {
       try {
        backendInterface = (ZInterface) bem.createBackendBusinessObject("ZCustomBO");
       } catch (BackendException e) {
      return backendInterface;
    public void setBackendObjectManager(BackendObjectManager bem) {
      this.bem = bem;
    public String getCustomFunc(String value) {
      try {
       return getInterface().getIncotermListvalue) ;
      } catch (RuntimeException e) { return ""; }
    3)ZINTERFACE.java
    public interface ZInterface extends BackendBusinessObject {
         public  String getCustomFunc(String value);
    4) ZBACKEND.java
    public class ZBackend extends BackendBusinessObjectBaseSAP implements ZInterface {
         String exportvalue="";
         public String getCustomFunc(String value) {
              try {
                   Function func =getDefaultJCoConnection().getJCoFunction("Z_CUSTOM_FUNCTION_MODULE");
                   func.getImportParameterList().getField("IMPORTPARAMETER").setValue(value);
                   getDefaultJCoConnection().execute(func);
                   exportvalue = func.getExportParameterList().getString("IMPORTPARAMETER");
              } catch (Exception e) {
                   return exportvalue ;
    5) WEB_INF/xcm/customer/modification/bom-config.xml
    <BusinessObjectManager name="ZCUSTOM-BOM" className="com.sap.isa.custom.ZBOM"/>
    6) WEB_INF/xcm/customer/modification/bom-config.xml
    <config isa:extends="../config[@id='crmdefault']">          
       <businessObject type="ZCustomBO"
                    name="ZCustomBO"
                    className="com.sap.isa.custom.ZBackend"
                    connectionFactoryName="JCO"
                    defaultConnectionName="ISAStateless"/>           
    </config>
    Regards,
    [Sateesh Chandra|http://sateeshchandrach.googlepages.com/isa]

  • The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

    Hi All,
    I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
    I gave access to only procurement and spend catalog folder reports and Dashboards.
    When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
    Its BI Apps 7.9.6.3 installation.I gave read  access to group to all procurement and spent subject area.
    Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P 
    Odbc driver returned an error (SQLExecDirectW). 
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000) 
    SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
    SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
    Please help me in resolving this issue and getting results on Dashboard.
    Thanks in advance
    Thanks,
    Sandeep

    Check your query or connection pool settings etc

  • How can I perform data logging for a specific time??

    hello everyone,
    I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
    But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi 
    I would appreciate for anyhelp!
    Regards
    Yun 
    Attachments:
    BP250 Encoder Position & Velocity (Host).vi ‏92 KB

    Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

  • Is There a Way to Run a Redo log for a Single Tablespace?

    I'm still fairly new to Oracle. I've been reading up on the architecture and I am getting the hang of it. Actually, I have 2 questions.
    1) My first question is..."Is there a way to run the redo log file...but to specify something so that it only applies to a single tablespace and it's related files?"
    So, in a situation where, for some reason, only a single dbf file has become corrupted, I only have to worry about replaying the log for those transactions that affect the tablespace associated with that file.
    2) Also, I would like to know if there is a query I can run from iSQLPlus that would allow me to view the datafiles that are associated with a tablespace.
    Thanks

    1) My first question is..."Is there a way to run the
    redo log file...but to specify something so that it
    only applies to a single tablespace and it's related
    files?"
    No You can't specify a redolog file to record the transaction entries for a particular tablespace.
    In cas if a file gets corrupted.you need to apply all the archivelogs since the last backup plus the redologs to bring back the DB to consistent state.
    >
    2) Also, I would like to know if there is a query I
    can run from iSQLPlus that would allow me to view the
    datafiles that are associated with a tablespace.Select file_name,tablespace_name from dba_data_files will give you the
    The above will give you the number of datafiles that a tablespace is made of.
    In your case you have created the tablespace iwth one datafile.
    Message was edited by:
    Maran.E

  • How can I create a log for the dice roll generator on my website?

    Here is my website: http://gator789.hostgator.com/~stillman/index.html
    I want to create a log for each time the roll button is clicked to generate a random image of a six-sided die on my website. I was thinking maybe a MySQL database with PHP would get me what I want? I have no idea how I would start setting this up though. I don't want to sound to pushy here, but I would also like to have a form setup above the roll button for name details, etc. How would I go about doing this?

    I don't understand why you need a log to generate a random number.  The logic behind a random javascript image generator with a math function is all you need.  Put your gif images into an array and let the script do the rest.
    http://eposic.org/samples/dice/part1.php
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

Maybe you are looking for

  • My 21" Imac has display problems

    I have a problem with my 21" Imac display when moving Icons the diplay image become corrupt

  • Integration between e-business and discoverer

    we use ebusiness suite 11.5.10 and want to make end users use discoverer for their requests and reports, is it possible? is there a library that convert the application user and their responsibilities to EUL and business area that they can access and

  • What are the contents of ReportView​er.dll that comes with CalExec?

    Calibration Executive comes with code module ReportViewer.dll. What are the function prototypes for the routines in this module? There is no information on the exported functions that can be used by another calling program.

  • Assign dedicated tablespaces to partitioned table

    Hi, I'm facing an issue trying to assign a dedicated tablespace to a range partitioned table using the NUMTOYMINTERVAL clause. I'm working on Oracle 11g version and I would use the auto partition creation feature in order to create each month a new p

  • Starting Problems after installing Software Update SecUpd2009-001ppc.pkg

    Hey Guys, After installing the SecureUpdate from January 2009 today my iMac just seems to freeze at startup. Only thing appears is the grey apple and the loading animation. *Already tried Disk Utility, fsck, and Safe Startup.* +-Disk Utility doesn't