Logging in as an end user issue
Hello
APEX - 4.1.0.00.32
DB version - 10g
Web server architecture - OHS
Browser - IE8
Theme - 5
I have a working application that I want to deploy to end users, I have started the application and gone to the run application icon and right clicked and copied the url. when I open a new IE window and use the copied url the page comes up to allow me to log in, but the developer toolbar is still available at the bottom of the screen.
Here is the url I use to go in as a developer
https://as271p1.cio.gov.ns.ca/pls/apex/f?p=4000:1:2313236537336539::NO:RP:FB_FLOW_ID,F4000_P1_FLOW:129,129
and here is the url I am trying to use as an end user
https://as271p1.cio.gov.ns.ca/pls/apex/f?p=129:LOGIN:2781678685109191
any assistance would be appreciated.
Thank you
Another tip I forgot to mention: this is default behaviour when you have Availability Status = Available with Edit Links. Like mentioned in documentation:
Available with Edit Links - Application is available for use. For developers, the Developer toolbar displays at the bottom of each page. Requires the developer to be logged in to the Application Builder in the same browser session.
Similar Messages
-
Sap Gurus,
What are the major issues (& their solutions) faced by end user while using the SAP FICO module?
Also, please let me know some issues (& their solutions) faced by end users while using AP-MM.
Thanks alot in advance.
--SJHi,
Issues in FICO revolve around Master Data setup, minor enhancements by changes to config, design of new reports (ABAP or Report Painter), some analysis issues etc.,
AP & MM would revolve around F110, MIGO, MIRO, Master Data setup and Integrations issues.
Rgds. -
Forms application not opening for the end user.
I have an Oracle Form that works fine when I copy the url into the browser and user the login credentials of the schema owner. But when I use the credentials of the end user, it does not open the form. I receive no error messages.
To troubleshoot, I opened the form in Forms Builder, log in as the end user and Compile, but I get no error messages.
I also took a call to a server-side procedure that is in the Form, and ran it in SQL Developer, once again while logged in as the end user, and it ran successfully.
I’m not sure what could be wrong. Any suggestions on how to debug this?To troubleshoot, I opened the form in Forms Builder, log in as the end user and Compile, but I get no error messages.What happens if you run the form from forms-builder with that credentials.
-
Hi Folks,
Our production IDM setup has 3 IDM instances sharing the same repository. The IDM End user is used for setting passwords in IDM and LDAP.
Recently, couple of users have reported this error while trying to log in into IDM end user login page.
"Your password has expired for account xxxxxx. Please change it now.
Item User:xxxxxx was not found in the repository, it may have been deleted in another session."
I had seen an earlier posting on this but there were no answers. Does any have a clue why this happens?
Any lead will be greatly appreciated.
Thanks in advance!
SuveshHi shivjansi,
This is normal behavior for the service desk. It gives end-users a limited UI compared to the ticket processors. Unfortunately the features of the limited UI are hardcoded so you cannot configure the UI so that end-users get two tabs while a ticket processor gets all six tabs. This may change in SolMan 7.1, let's hope so
SolMan determines if a user is an end-user by checking the auth object
CRM_TXT_ID
Activity <ACTVT>: 02
Text ID <TEXTID>: SU15
If the auth check for this auth object fails, then the user is considered to be an end-user and they get the limited UI.
Good luck!
Jon -
End Users cannot log in to the ccmuser web page.
Greetings,
I have a Call Manager Business Edition that was synched with a customer's AD directory. However, the end users cannot log in to the ccmuser web page with either their AD password or the Call Manager end user PIN.
Any suggestions?
Thanks
GeorgeThanks for your reply, Aaron.
All users are in the end user group.. I even created a new role/user group that gives users complete read/write access to all end user features. Still no go. I think it is an LDAP issue, but I'm confused because everything else works. -
End User Guide and Clone issues
Hi,
I am a newbie apps dba and would like to which docs/books to refer to know how the end user's work in EBS like how they place an order,etc.
And also, I have done my clone a day back but the user's complain it is slow. I submitted a CP, it was completed successfully and it looks ok for me.
Thanks.Hi Psn,
I am a newbie apps dba and would like to which docs/books to refer to know how the end user's work in EBS like how they place an order,etc.
Providing your EBS environment, will help us to provide better assistance on your questions as possible. There are so many Oracle's online documentation in learning Application products.
Please refer the following:
Oracle E-Business Suite Documentation
I have done my clone a day back but the user's complain it is slow.
- Check whether the Database Alert logfile, and application log files shows for any errros.
- After cloning by default the sga target memory turns up to 1GB, ensure it is set accordingly.
- Run an ADDM and see whether you have any database bottlenecks.
Hope this Helps !
Regards -
End User - ESS Timesheet Display Issue
Hi All,
Hopefully I have posted this in the correct forum. I tried to search of the issue I have for an end user but had no success, so I thought since my post graduate study surrounds ERP systems and work with SAP every day, I though it was best to register.
Now the issue I have here is, when the user goes into their portal ESS to view their timesheets, the display is unsual. They do not have an option to manually go back to previous weeks and the view of their timesheet is 'squashed' in (Timesheet Entry View) but if you scroll across to the right where the date and 'go to' function is, it has been cut off. There are no issues with any other users so it appears to be a local issue
Currently, I have reverted back to IE7, checked for any add on's that may cause display issues, I have checked their roles and everything is normal. The only issue I can see is some conflicting issues is with the Browser and SAP.
Any help will be appreciated.
Edited by: A_Ali_ on Jul 19, 2011 1:05 AMCheck the configuration setting for the profile that's being used by ESS. As this is where you can restrict user's ability to navigate forward and back from current week etc.
Cheers,
Brad -
Hi All,
I am having CUCM 7.1.5 and CUPS 8.0(4) installed. The problem is when I tried to login the CUPS user page the it says "login failed". The CUPS intergration with CUCM seem to be fine because all the end users can be seen in CUPS. But I am not able to login the CUPS user page. Users have needed roles assigned to them.
CUCM is sycronized with LDAP server over SSL
Can anyone pls help me on this. What else I need to check? Is there any log to check on CUCM or CUPS?
ThanksHi Ronak,
It is not the problem login to the CUPC (still I didn't tried it), I have problem login to the CUPS User Web page using end user credentials in CUCM
End users have needed roles assigned and they also are CUP enabled users
Pls can you suggest me to any thing to check, As I said our CUCM is sycronized with LDAP server over SSL
Thanks -
CVP call server logs
Hi All,
I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent.
Attaching CVP call server Logs& UCCE TCD& Route Call Details for your reference.From the CVP logs, it can be determined which side disconnected the call first. For each call, CVP keeps track each call leg. From Inbound Gateway to CVP is INBOUND leg, rest are OUTBOUND leg. You can then look at which leg the SIP BYE message is received first.
Since you have very basic log enabled, you will not see the exact SIP message. But it can be determined by the outcome of the message. Here is the snippet of the log during the disconnect:
Line 3766: 3083689: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL: {Thrd=DIALOG_CALLBACK.6} CALLGUID = CBCCDD8539E811E4A3E2CCEF48565980 LEGID = CC65CE04-39E811E4-87DFD7D1-64B198F2 - [INBOUND] DURATION (msecs) = 25610 - DIALOG TERMINATED. Reason: Q.850;cause=16
Line 3768: 3083690: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL: {Thrd=DIALOG_CALLBACK.6} Sending BUS MSG:>>HEADERS: (JMSType)=MsgBus:CALL_STATE_EVENT (JMSDestination)=Topic(CVP.SIP.CC.EVENT) (JMSTimestamp)=1410549671293 >>BODY: callguid=CBCCDD8539E811E4A3E2CCEF48565980 RouterCallKey=6472 RouterCallKeySent=true causecode=1 timezone=America/Los_Angeles RouterCallKeySequenceNumber=0 version=CVP_8_5 labeltype=1 RouterCallKeyDay=151099 calldate=Fri Sep 12 12:21:11 PDT 2014 label=190376 localOffset=-420 eventid=6 calllegid=CC65CE04-39E811E4-87DFD7D1-64B198F2 >>STATE: isTabular=false isWriteable=true cursor=-1
The first Termination message came on the INBOUND leg which is the PSTN. That means, PSTN side disconnected the call first.
Hope this helps.
Abu -
The interactive form I have designed will be completed by people who are very conscious of their privacy. I imagine that most of them will not be happy to email their data, as this leaves easily found "breadcrumbs" on their computer.
Is there any way this data can be sent without going through the email process? Would submitting to a URL overcome this problem, or are there other "privacy issues" for the end user which may come into play?Thanks Danmaster - after investigation I find I have been using SOAP for some time now. I've just never been conscious of its acronym. So if I have been communicating between applications using a communication protocol I have been using SOAP (Simple Object Access Protocol).
I am starting to think I'm really clever now.
Just because I have been submitting forms through http and then using CGI scripting on the server to convert and email me the results, I never thought that SOAP was such a vital component.
So perhaps the LiveCycle Designer will just allow me to create automatically what I have been hard-coding for years.
I really should have asked that "if the client submits via http through the LiveCycle form, will they be shown any hints that the data has been submitted".
Cheers -
Find the User ID through which the end user logged in BEx Analyzer?
I want to fetch the end user USERID who is executing the query. I am the end user and want to view a report, so I will login into BEx Analyzer with my userid and start executing query. Is there any way I can find that ID, in any table, program, function module or some where........?
I don't want 'created by', 'last changed by'. I want ID through which end user is logging into in Analyzer.
Also if the end user is logging in through RSRT wanted to know the SAP login user ID through which the user logged in?Hi,
If you want to see the end user id that is running the query, and then open the workbook, select Layout from the menu u2013 Display Text elements. Click on All (or General, Filters or Variables based on your requirement). It will display the technical name, info provider, current user details. You can save it as existing work book transport to production, then when this query executed you can find end user login id.
May be you can check RSRWBTEMPLATE table for workbook users details. Mostly end user will not have access to RSRT.
Hope it helps you
Thanks
Riyez -
GRC AC 10.1 - End User Login - Request issue
Hi experts!
Im working in GRC AC 10.1 SP07. I have configured END USER LOGIN services; the idea is that end user from ECC system could submit request without having user in GRC box, this is working fine but i´m experimenting next problem.
When i go to search request, those request submited by end user appears like created by Z_END_USER, this is the user in GRC that i have configured in services GRAC_UIBB_END_USER_LOGIN and GRAC_OIF_REQUEST_SUBMISSION_EU.
¿Is possible to configure that request appears "Created By" the requester and not the service´s user? I don´t think so, but if not, ¿is there any way to add the column User ID in Result screen? because it is avaible in parameters search but im not being able to add this in result screen (it´s not like hidden neither).
Parameters "Created by user ID" would be service´s user and "User ID" would be the requester.
Thanks!
EmilianoHi Emiliano,
Your understanding is correct, request created by UserID will always show GUEST UserID configured in the End User Logon service.
In search requests there is option to search requests by UserID but the same field has not been enabled to be available in Search Request result screen. This is as per standard functionality. You can check with SAP or can work with ABAPer to make the UserID column as display field in Search Request results.
Regards,
Madhu. -
Issues with end users saving fillable pdf's.
I created a fillable form via Adobe XI Pro. Just some standard radio buttons and text areas. Some users after filling in the form when they save the file it erases everything they filled in. I cannot control the version of adobe the end user has on their system, is there anything I can do. I am not even sure if that is the problem as it seems to only happen 20% of the time the form is sent out. I confirmed with the last user that encountered this problem that their system has Acrobat XI v11.0.06.
The original one I sent is the base document I send out. Attached is the
last set I received where client said they completed but when saved it
erased all the entries. -
Acrobat Pro XI problem+Accept End User License Agreement when opening a PDF inside IE
Hi folks, this issue has been challenging.
Acrobat Pro CC install
W7 X64
Deployment went ok after the code was worked out, but.....
We use Desire to Learn content management system at the community college where I maintain the student computers at. When running D2L and a PDF has been embedded in some course material, I am getting the message below and the PDF won't open.
“Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" .
The only fix so far is to run up Acrobat Pro and run the program once. Fine and dandy, but we are looking at 700+ machines to clear in this fashion. The other part of this scenario we we also utilize Respondus Lockdown Browser to invigilate exams through D2L. Because of the "lock down" features, the student can't even get back to the desktop to run Acrobat and clear the message.
I have tried a number of GPO entries to no avail. As well, disabled the IE PDF viewer add-on. I ran Procmon with no results either; .
I have been scouring the Googlemachine and building on the GPO below to get around the issue with no results. I am hoping someone with a sharper eye than I can spot something or point me in the correct direction..
Thanks eh.
GPLabs-Acrobat Reader default .PDF file open
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the central store.
Adobe Acrobat XI/Preferences/General
Policy Setting Comment
Show messages when I launch Acrobat Disabled
Adobe Reader XI/Preferences/General
Policy Setting Comment
Show messages when I launch Reader Disabled
Adobe Reader XI/Preferences/Startup
Policy Setting Comment
Enable Protected Mode at startup Disabled
Preferences
Windows Settings
Registry
ELUA=1 (Order: 1)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name ELUA=1
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
EULAAcceptedForBrowser (Order: 2)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Adobe Acrobat\11.0\AdobeViewer
Value name EULAAcceptedForBrowser
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
ELUA=1 (Order: 3)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name ELUA=1
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
EULAAcceptedForBrowser (Order: 4)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Adobe Acrobat\10.0\AdobeViewer
Value name EULAAcceptedForBrowser
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
bBrowserIntegration (Order: 5)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\11.0\Originals
Value name bBrowserIntegration
Value type REG_SZ
Value data 00000000
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
bBrowserIntegration (Order: 6)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Acrobat\11.0\Originals
Value name bBrowserIntegration
Value type REG_SZ
Value data 00000000
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
bBrowserIntegration (Order: 7)
General
Action Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path Software\Adobe\Acrobat Reader\10.0\Originals
Value name bBrowserIntegration
Value type REG_SZ
Value data 00000000
Common
Options
Stop processing items on this extension if an error occurs on this item No
Remove this item when it is no longer applied No
Apply once and do not reapply No
User Configuration (Enabled)
Preferences
Windows Settings
Registry
ELUA (Order: 1)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name ELUA
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
ELUA (Order: 2)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name ELUA
Value type REG_DWORD
Value data 0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
.pdf (Order: 3)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
OpenWithList] (Order: 4)
General
Action Update
Properties
Hive HKEY_CURRENT_USER
Key path Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.PDF\OpenWithList]
Value name (Default)
Value type REG_SZ
Value data "AcroRd32.exe"
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) No
Remove this item when it is no longer applied No
Apply once and do not reapply No
Control Panel Settings
Folder Options
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe)
pdf (Order: 1)
General
Action Update
Properties
File Extension pdf
Associated Program C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Set as default Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) Yes
Remove this item when it is no longer applied No
Apply once and do not reapply No
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe)
pdf (Order: 2)
General
Action Update
Properties
File Extension pdf
Associated Program C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Set as default Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item No
Run in logged-on user's security context (user policy option) Yes
Remove this item when it is no longer applied No
Apply once and do not reapply NoHi technobyte,
Try using APTEE to do EULA suppression and check.
You might want to refer the docs:
Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
4 Installation Workflows — Enterprise Administration Guide
Regards,
Rave -
Hello,
I have a problem with an end user permission that seems to get ignored: I wanted to demonstrate the usage of the end user permission and assigned a role to a User (for simplicity's sake as an entry point, no worksets, pages etc. involved) and enabled end user permission on the role for that particular user.
Now when that user logs in he gets to see the according entry in the navigation bar as expected. However if I disable the end user permission, log out and again log in the user, he stills sees the link. The end user permission setting is simply ignored. Can someone shed light onto this, could there be something wrong with the installation)?
I don't think this is an issue of permission inheritance (the role permissions are set explicitly anyway) or overlapping permissions due to membership in several groups - the user is only member of the single standard group 'authenticated users'.
Regards,
Sebastian
P.S. What's the use of a role assignment to a user without end user permission anyway (I mean why the option)? What happens if you don't add permissions on a Role for a certain user at all (I tried it, but the effect is the same as described above - end user permission seem to be irrelevant)?Hi Robert,
thanks for your answer and for the link (and I thought I had read everything). I am not so sure however if I really understand the term 'runtime environment' for a user. I thought runtime vs. design-time meant the difference between the content a user sees when he is actually using the portal and the content an administrator has access to in the portal content catalog, i.e. a meta-environment accessible only through certain tools like the permission editor or similar.
I don't understand what you want to express with "<i>It's used to restrict ... end user runtime environment</i>" and why the "Page Personalization" is an example.
I realize that for roles the availability for a user is solely defined by the assignment of that role to the user - end user permissions have no effect on this. Confusing, because I tought this availability (i.e. showing links in the toplevel or detailed navigation) was what was meant by 'runtime environment' but I seem to be wrong here.
The docu says "<i>for roles the end user permission setting does enable you to define which users/groups/roles are able to preview the role content using the portal design-time tools</i>". Again, I am confused, I thought this was exactly the meaning of design-time environment.
Great if you or someone else could comment on this..
Regards,
Sebastian
Maybe you are looking for
-
How to go from NW 7.0 (and 7.0 EhP1) to NW 7.0 EhP2 Java only.
Hi, I'm trying to figure out the correct way to go from NW 7.0 (and 7.0 EhP1) to NW 7.0 EhP2 on a single stack system (Java Only). Some threads on the forum mention the use of SAPEHPI, however, when I go to see the SAPEHPI guide for Java (http://serv
-
Sidebar not connected with Kerberos after upgrade 10.5.2
before upgrade 10.5.2 with sidebar finder i could connected at xserve with kerberos AFP, after upgrade not possible connected sidebar with kerberos only use connected the server in the menu bar finder. where it is problem TANKS
-
Exceptions handling for "submit of Insert Report "
Dear Experts, i need to handle Exception "syntax Error" when Submit the inserted report. i tried " try and Catch " but failed to catch Dump Error. for example: Data CODE TYPE TABLE OF String . APPEND 'REPORT ZDYN.'
-
Upgrading from 10.3.9 to Leopard 10.5.4
I have a 1.25 GHz PowerPC G4 1MB L3 cache and 512 MB DDR SDRAM. The specs say my machine can run Leopard 10.5.4 but is it worth it? I want to be able to update safari b/c videos don't work and I can't get any more java updates. My main concern is tha
-
Hi, I have a 6151 and the call divert activates too quickly. How do I change how long the phone rings for before it diverts to voicemail? Solved! Go to Solution.