Logging in to another user in B1

Hello Guys
Iam using SAP B1 2004 2B PL:40,(India)
When iam trying to enter with another userID according to the Authorizations, When i Logged in to that, iam not able to open any document & getting a message "Generating this document requires numbering to be determined for the document" can any one please help me about this.

See The SAP Note Number 554414:
https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=S&note_numm=0000554414
User is unable to create new document
Symptom
When the user tries to create a document the following error message appears: "Generating this document requires numbering to be determined for this document".
Other terms
Authorization, numbering, creating, documents, message, generate
Reason and Prerequisites
The user has not been authorized for series, and can therefore not
generate new Marketing Document Numbers.
Solution
In order to remedy this problem, please perform the following steps:
Note that the following steps can only be performed by a super user.
Choose "Administration"
Choose "Authorizations"
Select the user from the list on the left hand side of the Authorizations table.
From within the Authorisations window choose "Administration"
Choose "System Initialization"
Choose "Series"
On the right hand side of the table, change the permission for "Series" from "No Authorization" to "Full Authorization".
Click the "Update" button.

Similar Messages

Application won`t start - starts when logged in as another user

An application created by Unity doesn`t start. When I double click (or right mouse click and choose `open`) nothing happens. However, when I log in as another user, or when I try to run the same program from a flash drive, it works. I tried a lot, including repairing permissions, but nothing helped.
Thanks in advance !

Try logging into your user while holding down the shift key on your keyboard, to supress any startup items that may be interfering with your program.
If that does not do it, look for a preference file in you user folder by choosing the Go menu from the Finder and selecting Go to Folder and enter ~/Library/Preferences and checking for files having to do with your application. If there are any, move them to your desktop and try again.
If that does not fix it, move them back, replacing the new ones that will be built. Also, if your program uses any data files or libraries when started up, try removing those. Again, if not fixed, put them back.

I can no longer edit images on external drive if logged in as another user even with permission.

I have two users on my computer. Me (admin) and another log-in for assistants, clients etc.
I use an external drive to hold images.
Lately I've had a problem where if I'm logged in as Other (this side for everyone else), I often am not able to edit images even though the permissions are set for this log-in to have complete read/write capabilities?
Even sometimes when I'm logged in regularly (my admin side) I have received a "File Reservation" error. It says the file is being used by another user. ????
Then it asks if I want to use Read-Only and do I want to be notified when the file becomes available. ????
What's happened to my files?

Similar problem here. My Ical refuses to edit or delete events. Viewing is possible, though sometimes the whole screen turns grey. Adding new events from mail is still possible. The task-pane completely disappeared. My local apple technic-centre messed about with disk utility for a bit and than told me to reinstall leopard. I could of course do that, but it seems to me that reinstalling Leopard just to fix iCal events is a bit invasive.
I tried also tried removing everything, installing a new copy of iCal from the leopard-cd, software updates, all to no avail.
At the moment I'm open to all suggestions that do not include a complete leopard reinstall.

When I log in with another user my wallpaper disappear

Hi, I had this problem with mountain lion and still have it with mavericks
I have three user accounts in my mac mini, one for each person in the family.
When we switch between one user to another the wallpapers disappear showing only a solid background.
It's very annoying to select a wallpaper everytime we log into our account.
I'd appretiate if somebody can help me to fix this.
Regards, and Happy New Year!

I know of one other topic similar to this. I'm not sure if it was solved.
When things like that revert back to the wrong settings, it is usually that the system cannot write to the preference list file, or in this case, the database.
On the other topic, they tried deleting the desktop database and the desktop.plist, but I don't think it helped.
If you are seeing this across the board for all users, it has to be something else interfering.
Please try booting into Safe Mode and try changing desktop pictures, then switch users.
Some things do not work in Safe Mode, and it might appear sluggish.
http://support.apple.com/kb/HT1564
If it works in Safe Mode, it is third-party software interfering.
FYI:
The database is in your user/Library/Application Support/Dock folder: desktop.db
The preference list is in your user/Library/Preferences folder: com.apple.desktop.plist

Security log 4634 shows another user logging off

Security log shows users logoff that weren't even using the machine. There are no 4642 logon logs, just the 4643 logoff logs.
These user aren't even accessing another machine via the network. All machines also have no malware or virus on them.
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
What could be causing this?

It's a domain enviroment. Printers are all through a Print Server.
Below is the log of 1 such event.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2014-04-04 03:04:24 PM
Event ID: 4634
Task Category: Logoff
Level: Information
Keywords: Audit Success
User: N/A
Computer: (computer name.domain)
Description:
An account was logged off.
Subject:
Security ID:
S-1-5-21-213254720-224688177-246369
Account Name:
(username)
Account Domain:
(domain)
Logon ID:
0x197EC67
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4634</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12545</Task>
<Opcode>0</Opcode>
<Keywords>0x8020000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T13:04:24.783747600Z" />
<EventRecordID>108300</EventRecordID>
<Correlation />
<Execution ProcessID="724" ThreadID="756" />
<Channel>Security</Channel>
<Computer>(computer name.domain)</Computer>
<Security />
</System>
<EventData>
<Data Name="TargetUserSid">S-1-5-21-213254720-224688177-246369</Data>
<Data Name="TargetUserName">(username)</Data>
<Data Name="TargetDomainName">(domain)</Data>
<Data Name="TargetLogonId">0x197ec67</Data>
<Data Name="LogonType">3</Data>
</EventData>
</Event>

Can operations continue to run when logged in as another user?

I've logged in as myself and I have set an operation to run, its going to run for a while and I would like the ability of my wife to log in. When you do this the operation pauses while logged in as her.
Can it continue to run at the same time?

Try logging into your user while holding down the shift key on your keyboard, to supress any startup items that may be interfering with your program.
If that does not do it, look for a preference file in you user folder by choosing the Go menu from the Finder and selecting Go to Folder and enter ~/Library/Preferences and checking for files having to do with your application. If there are any, move them to your desktop and try again.
If that does not fix it, move them back, replacing the new ones that will be built. Also, if your program uses any data files or libraries when started up, try removing those. Again, if not fixed, put them back.

How do stop automatically logging in to another user's account?

My computer connects to SBC Yahoo DSL via PPPoE. The SBC Yahoo DSL account and password are set (in Internet Connect) so that when you click on Safari, the computer is able to connect to the internet without having to type in the account name and password each time.
The problem is, there are multiple users on my computer who have Yahoo (or some variation of Yahoo, such as SBC Yahoo! or My Yahoo!) as a homepage. When one logs off, and I log onto my Yahoo homepage, I find I am still logged into the account of the user who just logged off. How do I stop this from happening?

Hi mhoesq,
Thanks for clarifying the different identities.
Now, when each of you go to different parts of Yahoo, do you have a similar setup as with Safari, that is, each has a Yahoo identity and password ( I presume this if it says welcome so and so) and have you checked an automatic log-in/ remember me sort of thing.
If that is the case ( and here I'm guessing) then if each person does not log out of their Yahoo account but just closes Safari, then the next time someone else logs in, Yahoo will think it is the same person.
Safari will remember a user's homepage, and Yahoo will remember who is logged in.
So adding to the scenario that you have described, if User A actively logs out of their yahoo account and then closes Safari and logs out of the Mac, then I would imagine when User B logs in, fires up Safari and is automatically logged in to a new yahoo account then it should say Welcome User B.
There are a lot of presumptions here, but this may be the explanation.
regards, roam

ORACLE Not Available - only when logged on as another user

I can't figure out what I forgot. I installed everything (RH 6.1
and standard) and can login as internal from user oracle no
problems.
When I login from a user I have granted dba to I get Error
01034: ORACLE not Available. This is in sqlplus. I am sure it is
something obvious as I had it working before my 5th reinstall.
Thanks,
Jon Griffin
null

Jon,
Are you sure that the Database is started? You will get this
error if it isn't.
Chris
Jon Griffin (guest) wrote:
: I can't figure out what I forgot. I installed everything (RH
6.1
: and standard) and can login as internal from user oracle no
: problems.
: When I login from a user I have granted dba to I get Error
: 01034: ORACLE not Available. This is in sqlplus. I am sure it
is
: something obvious as I had it working before my 5th reinstall.
: Thanks,
: Jon Griffin
null

Hi, since iphoto updated to 9.5.1 i cant open it. it puts a message up saying iphoto is being updated, but if i log out and log in to another user account i can open it no bother, any ideas?

problems with iphoto 9.5.1
it says updating iphoto and its been like it for weeks since it updated its self.

There are two ways to recover from this condition.
1. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. Stop or resume the download.
2. Open LaunchPad and find the icon of the app you're trying to install. There will be a small progress bar below it. Click the "X" to stop the download.

Remote access to another user

Is it possible to use Apple's Remote Access to go into another logged in user on the same machine?
Lets say on 1 computer you are logged into the "main" account and then log in with another user account. Can you the open Apple Remote Desktop and access the other logged in account, for example, to log that user off without having to actually switch to the user account first?

Hi, I had same problem and I was able to resolve by updating the configure information on the mapping. For each of the source tables I entered the schema and db link. Then when I executed the code the table was properly identified with schema and db link. I don't know if this is the correct solution. I would like to know if this is the proper way to resolve the problem. I took the class and we didn't have to do this. Also you will see warnings when you deploy. Hope this helps.
MJ

Acrobat 9.5.0 - when logged in as ONE user unselect "Display PFD in browser" don't work

Have Acrobat standard v9.5.0 running on Win7 - 64 bits. All up to date patched. On one user I can not let PDF files downloaded from the Internet open in an external window. I in the Preference I have unselected "Display FDP in browser". Then I can see the file is downloaded, but never opened. I if select "Display FDP in browser" it is (now) OK. If I uninstall IE9 and am running IE8 or Firefox, everything is fine. It is also fine if I log in as another user.
I have uninstalled Adobe Acrobat and reinstalled. Uninstalled IE9 and reinstalled. My conclusion is that there is something wrong with the registry HCU part for the "problem" user. I have deleted HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0 but still I have problems.
My question is: Which part of registry controls IE9 and opening PDF files downloaded from internet? How can I find the "bad registry key" for the problem user?
Thanks in advance
Harald

Is IE9 Security preventing the download of the file? IE9 has a security feature that does this and pops a dialog at the bottom of the browser window, you might want to check it out.

How can I screen share another users desktop on the _same_ macbook?

Hi,
I'm trying to login multi-user into my own Macbook.
What I mean is, on my macbook start a session logged in as another user on my own macbook.
Using JollysfastVNC I can do this, but its terribly slow, like unusable slow. Tried changing the color depth and everything.
I tried both Mac and VNC authentication and VNC usally gets so slow it freezes, and Mac is very slow and unusable.
How can I fix this?
Running Lion on Mid-2009 Macbook Pro

Your graphics driver's dialog repositioning option? Check that.
Mylenium

How to make one user get locked to edit when another user is editing??

Dear friends,
In the webdynpro application option is given to controll the editability of the UI elements using edit button.When the same application is logged in by another user for ex: B , he should get a prompt saying user A is editing the page.
How to implement this ??and what is the best approach for this please advice.
Thanks in advance.

The best way I could think of and what we implemented is:
Creatin a DB Lock Object around data which you want to work upon.
Requesting a lock when some one opens up a session for editing, if granted then go in edit mode else go in display\ read only mode with a message.
Release lock after save.
Regards
Manas Dua

Trackpad is not clicking if im on another user

Please help
I notice that if log on to another user the trackpad only works for scrolling not for clicking it

You don't see this when you click on the Trackpad option in System Preferences under that User's ID:
If you don't have those boxes, perhaps it is a difference between our OSX levels.....
Cheers,
GB

Another user of your computer is currently using this connection. This user must disconnect before you can log on.

Hello
I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
However, when I attempt to log in more than one user through RDWEB I receive:
Another user of your computer is currently using this connection. This user must disconnect before you can log on.
I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
Enable Multiple RDP Sessions
- Log into the server using Remote Desktop.
- Open the start screen (press the Windows key) and type gpedit.msc and open it
- Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
- Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
- Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
However, it did not solve the problem. Anyone have suggestions?

Hi Michael,
In addition you can try below registry setting for multiple remote session.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
fSingleSessionPerUser REG_DWORD 0x00000000
Note: By default the registry value is set to 1, but you need to change to 0.
Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Logging in to another user in B1

Similar Messages

Maybe you are looking for