Logging in to WiFi server

For some reason our iPod (4th G) will only let us use capital letters on the first letter of the WiFi passcode. Since the whole thing is case sensitive, we cannot log into our own wifi server. Any suggestions?

Same problem for me, with a capital letter in the middle of the password that the ipod would not let me enter. According to the user guide, if the caps lock option is enabled (under setting -> general -> keyboard) then you can re-enter caps mode by double-tapping the up arrow. This didn't work for me, but what did work was to press and hold the up arrow, then drag over to the letter that I want to capitalize. Not very intuitive, but it worked for me. This seems to put the unit back in caps-lock, so if you then want a lower-case letter you need to simply press the up arrow once.

Similar Messages

Log out of wifi server

Hi,
I have a wifi card valid for one week, but I want to log out from this username and password before it expires, and enter a new (gratis) username and password so I can extend my connection a further week. There was a pop up window at log-in but I'm unable to find a window where I can log-out. I can't re-open the log-in window. I'm automatically connected every time without having to log-in. The new card has to be validated within a limited period.
Thanks.

Could you be specific as to WHAT card it is you're using?
It sounds like the card and account system is specific to a particular network provider, so you should at least state that so that others who use the same system might be able to help.
FWIW I doubt you can do what you want, anyway (it is likely the card/account is valid for one week after it's first activated, and therefore will expire 7 days later no matter what other accounts you may use, or how much you use it), but others may know different information once we know who we're dealing with.

Log on to remote server and start database -error while installing CI in HA

Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
 CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
 CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
 CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
 handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
 CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
Rishi

Dear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE

No SMTP log after upgrade to Server 4.0.3

I just updated my server to 4.0.3 and I initially had an error message saying that a script was not owned by postfix repeated in the SMTP log file.
First I tried to fix it with disk utility but it didn't work.
So in Terminal I did: sudo chown _postfix /Library/Server/Mail/Data/mta/./guid_device_maps.plist
Now I have no SMTP log showing in the server menu any ideas on how to get it back is very welcome.
Kind regards
Peter

Okay I reinstalled the Server from App Store and we're back to square one with the message:
postfix/postfix-script[2941]: warning: not owned by _postfix: /Library/Server/Mail/Data/mta/./guid_device_maps.plist
However, http://topicdesk.com/faqs/os-x-server-mail-services-faq/166-what-is-virtual-mail -hosting-or-are-virtual-mail-domains say the message doesn't matter.
So I apologise for the false alarm.
Kind regards
Peter

MAXDB copy log file from one server to the other server.

Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.A

Hi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

ICal could not log into the caldav server

Hi,
I have a OS X Lion server that i am trying to set up for home. I have made an account for myself and have got mail running for it but when I go to turn on Calendars and Reminders, i get the error message iCal could not log into the caldav server "me.com". One I am not sure how this has anything to do with me but anyway, the mail compnent works. Also when i go to the folder webdav via browser servername/webdav/ i get permission denied. I also get and Unathorized message when I try to specifically access the calendar via adress https://servername:8443/calendars/users/username/ I mention the permission denied stuff because i am assuming they are all connected to the Calendar service (ie it runs on caldav which runs on webdav). can anyone help with this as I would like to get this working.

One possiblity is that the user you created has not been granted access to the calendar service. How did you create the user on the server, via Server.app?
Are you able to browse to https://servername:8443/principals/users/username/ (of course substituting the appropriate server and user names)

How Can I See Who Is Logged In To My Server

+I posted this in the wrong forum, so pardon me if you've already read this as I am now re-posting it in the correct forum:+
I am running Mac OS X Server Snow Leopard 10.6.4 on a Mac Pro (2 x 2.93 Quad Core Xeon, 8GB RAM).
I figured out how to see how many users are logged in to this server (using the Server Admin application). But I don't know if I can see the names of each user and their traffic usage while they are logged in. How do I do this, if possible.
Sorry for such a simple question, but I've been Googling for about an hour and I am not getting anywhere. This whole server kind of got dumped on me here at work, and I need all the help I can get.

Welcome to Apple Discussions,
You are posting in the Mac OS X 10.6 client forum. For questions on 10.6 server post in the server forum: http://discussions.apple.com/category.jspa?categoryID=96
Good luck!

Errors in event log of Secondary DPM server protecting replicas on Primary

Hello again
I have two DPM servers, one situated on-site (primary) and one situated off-site (secondary). Protection jobs seem to be running correctly on both servers in that the jobs complete and I am able to restore data from the backups. I use the primary server
to make the initial backups of critical systems and data (Exchange MDB's etc) and the secondary server to backup those replicas off-site in case of primary site loss or DPM system loss.
The primary server is a physical server and the secondary server is a virtual server. Both DPM servers have their DPM databases stored on one physical SQL server that is in the primary site.
Basically what is happening is that every day our virtual machines are snapshotted (secondary DPM server included) and everyday the snapshot of the secondary DPM server fails. I see the following to entries in the event log of the secondary server.
Error 1:
WARNING
Source: MSDPM
Event ID: 955
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 2 Schedules removed: 2 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>27861</Seq><TimeCreated>22/05/2014 23:01:31</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
Error 2
ERROR
Source: MSDPM
Event ID: 4212
The description for Event ID 4212 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DpmWriter service encountered an error during PrepareBackup as more than one component is selected for backup in the same snapshot set. Select a single DPM replica for backup and try the operation again.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>7</Seq><TimeCreated>23/05/2014 00:30:45</TimeCreated><Source>d:\btvsts\21011\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>438</Line><HasError>True</HasError></__System><DetailedCode>4212</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
These two events are followed by another event from VMWare Tools everyday
Error 3:
WARNING
Source: VMWare Tools
Event ID: 1000
[ warning] [vmvss:vmvss] CVmSnapshotRequestor::CheckWriterStatus():1536: writer DPM Writer in failed state: res = 0x800423f4, err = 0x1, error =
Has anyone come across this before? Currently I am not quite sure what is going wrong and whether it is actually related to snapshots failing, but I want to try to fix these errors first and see what happens.
Regards

Your ar using VMware for Virtualization?
Are you trying to do an online Backup of the VM, think that will not work?
One thing i wonder, your have installed second DPM if Site one fails or goes done, but SQL for DPM2 is in Site one? try to move SQL to external site for DPM 2
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Logging into a specific server in a terminal server farm

We have several terminal server farms and in each farm we have the need for 1 user to always log into a specific server in the farm. This is due to a little piece of sortware that is required for a device that only this one user has and
the fact the it is licensed to only one server. The user must use that server for it to work. I want to include this server in the farm because it seems silly to have a server for only one user. How can I point one PC/user
to the same server in the farm all the time? We are using the Connection Broker and NLB which seems to work just fine for all other users.
Thanks

Hi Steve,
What operating system version are you running on your servers? Server 2008 R2? Server 2012?
When you configure a RDS farm to be load-balanced by the connection broker, all servers in the unique farm are intended to have the exact same applications installed. The idea is the RDCB can redirect users to different servers as needed to balance
the load, and that you may take any particular server (or servers, if you have enough) offline and your farm will still work.
Now, there are always exceptions and I understand it would be nice if you could assign a user/app to a specific server to handle a case like yours. For example, you would understand this particular user or app would not be load-balanced or highly
available and if the one server was down it would not work, but other users/RemoteApps would be load-balanced as usual. This is
not a feature of the current versions of RDS.
To do what you want the "best way" would require writing a custom plugin for RDCB. In your custom plugin you would specifiy the load-balancing logic. For example, when one of the "special" users logs on, your logic would direct them to the
correct specific server, but when a regular user logs on you would allow the normal RDCB load-balancing logic to apply. Please see here for more information:
Terminal Services Session Broker Plug-in reference
http://msdn.microsoft.com/en-us/library/windows/desktop/cc644962(v=vs.85).aspx
Besides writing a custom plugin I suggest you consider the following workarounds:
1. Instead of running the app under RDSH, run it in a Win7/Win8 VM pool if possible. Either a pool of identical VMs or assign each user that needs to run the app to a dedicated VM. Downside of this is added complexity, licensing for VDI,
and an increase in hardware resources required to run the VMs.
2. Have the user connect to the server using /admin. You can change the permissions so that a specific group may connect using a /admin connection, without them being administrators. Downside of this is that some features
of RDSH are not present when connected as an administrative RDP session, and only two Active admin sessions are permitted.
3. If running Server 2008 R2 you could set the server so that it does not participate in load balancing and have the users that need to run this special app connect directly to the server's ip address instead of to the farm name. Downside of this
is that you will get more uneven load distribution, however, it may not be that bad if you are balancing your initial connections using NLB and you have all of your regular users connecting to the farm name as usual.
4. Have a separate server in each farm (not joined to the farm) just for this one app. If possible they could be VMs with not much resources dedicated to each. I know this is what you did not want to do, but I mention it because an
extra base Windows Server license, one for each farm, is likely less additional cost than licensing the special software on
all servers. If you can run the app in VMs then the additional hardware cost of doing it this way is reduced.
-TP

Failure to log in to network server due to an "error"?

I'm having trouble connecting as a user to the office server from my MacBook Pro. When I attempt to log in to the server it loads for about 30 seconds and then simply says it failed to log in because of an "error", without giving me a number to reference the error. Other IMacs in the office have no trouble connecting under their usernames so I am lead to believe it is a client problem with my laptop... Any advice on what to adjust in my settings to fix this error?
Thank you in advance

You might do 2 things.
First look at your Applications -> Utilities -> Console to see if there are any errors related to your connection failure in your MacBook Pro logs.
Second, look at the server's logs to see if has anything say about why it refused your connection attempt.

Logging into a remote server Windows prepopulated my domain name and I don't want it to.

I am logging into a web server using an old and no longer supported Microsoft software but when I do this the username is automatically populated with ALASTAIR-PC/Administrator. When I select another account the domain still shows ALASTAIR-PC. It's that
domain that is preventing me logging into the server. I also tried to enter the IP address of the server but again it's still showning the domain name.
Hence... how can I stop the ALASTAIR-PC showning?
Or
Is there a way for the web server recognising my domain and thus letting me sign in?

Hi,
You can type"\" before User name, it would clear the default domain login. If I misundertand your meaning, please feel free let us know.
Roger Lu
TechNet Community Support

IPhones creating logs on Enterprise 2003 server - cannot connect issues

A couple of us have iPhones/iPads that we've connected to our work server for email. For the most part, we've been quite successful in retrieving and sending mail. However, about once a week, we are unable to connect to the server. Come to find out, our iPhones place a whole bunch of huge log files on our server and effectively shut down our access when it fills up. It actually shuts down our SMTP server for everyone, not just the iPhone users. Our admin goes in and deletes the huge log files and access is restored. My question is this... is there any way to keep our iPhones from sending these log files to the server?
Message was edited by: ajsmom514

Firewall-related problems normally throw ORA-12535, not ORA-12170 (the message a timeout occurred is the same). Description for this error is:
Error:     ORA-12170 (ORA-12170)
Text:     TNS:Connect timeout occurred
Cause:     The server shut down because connection establishment with a
     client failed to complete within the allotted time interval. This
     may be a result of network/system delays; or this may indicate
     that a malicious client is trying to cause a Denial of Service
     attack on the server.
Action:     If the error occurred because of a slow network/system,
     reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
     sqlnet.ora to a larger value. If a malicious client is suspected,
     use the address in sqlnet.log to identify the source and restrict
     access. Note that logged addresses may not be reliable as they can
     be forged (e.g. in TCP/IP).
Hostname in listener.ora has a domain included, while in tnsnames.ora has not. Y Can you ping the host? Does tnsping work? To get more detailed informations you may turn on tracing on the client side (in sqlnet.ora) and the server sid (in listener.ora).
Werner

Standby database archive log apply in production server.

Dear All,
How I apply standby database archive log apply in production server.
Please help me.
Thanks,
Manas

How can i use standby database as primary for that 48 hour ?Perform a switchover (role transitions).
First check if the standby is in sync with the primary database.
Primary database:
sql>select max(sequence#) from v$archived_log; ---> Value AStandby database:
sql>select max(sequence#) from v$archived_log where applied='YES'; -----> Value BCheck if Value B is same as Value A.
If the standby is in sycn with the primary database, then perform the switchover operation (refer the below link)
http://www.articles.freemegazone.com/oracle-switchover-physical-standby-database.php
http://docs.oracle.com/cd/B19306_01/server.102/b14230/sofo.htm
http://www.oracle-base.com/articles/9i/DataGuard.php#DatabaseSwitchover
manas
Handle: manas
Email: [email protected]
Status Level: Newbie
Registered: Jan 24, 2012
Total Posts: 10
Total Questions: 3 (3 unresolved)
Name Manas
Location kolkata Mark your questions as answered if you feel that you have got better answers rather than building up a heap of unanswered questions.

How to log out in content server

Hi,
Whats is the process to log out in content server?
Thanks,
Abhijit

Hi Abhijit ,
Install the ExtranetLook component and enable it on the content server . Before restarting the content server add the following variable in config.cfg :
IsWebServerPagesOnly=false
Save the file and then restart the content server and WEBSERVER to get the component in effect on the content server.
After that you will see the logout button appearing.
You will get this component in the coreupdate patchset if you have downloaded one or else download it from http://updates.oracle.com/download/6907073.html
Thanks
Srinath
Edited by: srinathmenon on Mar 24, 2010 11:54 AM

Logging in to WiFi server

Similar Messages

Maybe you are looking for