Logging Kernel Panic during startup.
Occasionally I have Kernel Panic while the Loading Modules stage. Can I redirect the error to a file (it is quiet large)? I don;t have a serial port to connect a terminal.
I've been trying to find some way to capture panic info without a serial port, too. The best thing I came up with was kdb/kgdb. It will page through the panic and stack dump, and let you look at the kernel log buffer in memory. I just looked, and I think it's running at that point in the bootstrap.
kdump/kexec might be another possibility, but I don't know about loading a panic handler that early..
If you find anything, post back. I'm interested, too.
Similar Messages
-
Kernel Panics during startups - cannot boot anymore
First: Sorry for my bad english - i hope you still can understand...
The facts:
- MacBook 2,0Ghz - 2gb Ram.
- After 8 weeks --> random shutdowns. In OSX, in Bootcamp, in any application, even during booting OSX
- Replacement of the logic board, after suggested by AppleCare
- After that: OSX instable. Totally. Safari, DVD Player, Firefox, Adium.... any application crashed almost every 5 minutes
- Even sometimes: Kernel Panics. One time even at the login screen
--> I tried a reinstall --> Archive & Install
- DURING the installation of DVD 2 --> Kernel Panic.
- Sucessfully installed OSX in the second try
- OSX seems to run fine - I do the update to .7 trough SoftwareUpdate
- During reboot --> Kernel Panic.
- and now: during EVERY reboot (short after the apple on grey background) a Kernel Panic. I took a picture of that:
http://tinyurl.co/jon89
And now? I am sad! Crying! I don't know what to do anymore.. I'm writing now in Bootcamp-Windows - this is still running...
ANY suggestions?
sniff,
HauldhagenHi, Hauldhagen. Welcome to the Discussions.
See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Kernel panics on startup on a MB late 2008
Hi everyone.
After reading dozens of threads about kernel panics I couldn't find any appropriate post.
So you see, I've got a unibody MacBook late 2008 and as the thread name states I'm experiencing kernel panics on startup. The weird thing is, these panics occur totally random and I can't induce them. Usually I have an apple keyboard, apple mouse and a WD 1TB drive (TimeMachine backup) connected via USB plus an external monitor and magsafe power. Even after disconnecting all that stuff I receive kernel panics.
I haven't had any kernel panic during normal operation so far. As soon as I get the system up and running nothing happens. They just keep coming every second or third startup.
There are 9 crash reports in my L/Logs/Diag.Reports. You can see the last kernel panic report here:
Tue Jan 22 16:00:04 2013
panic(cpu 0 caller 0xffffff80102b7bd5): Kernel trap at 0xffffff7f9124f578, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80f1c3e000, CR3: 0x0000000012eae000, CR4: 0x0000000000000660
RAX: 0x00000000164aae3d, RBX: 0x01ffff8022416000, RCX: 0x0000000080a4a2ab, RDX: 0x0000000000000000
RSP: 0xffffff80f7443e50, RBP: 0xffffff80f7443e60, RSI: 0x0000000000000002, RDI: 0xffffff8010801ef0
R8: 0x0000000000000001, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8022416000, R13: 0xffffff8022038100, R14: 0xffffff80223d6100, R15: 0x0000000000000001
RFL: 0x0000000000010246, RIP: 0xffffff7f9124f578, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff80f1c3e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f7443af0 : 0xffffff801021d626
0xffffff80f7443b60 : 0xffffff80102b7bd5
0xffffff80f7443d30 : 0xffffff80102ce4ed
0xffffff80f7443d50 : 0xffffff7f9124f578
0xffffff80f7443e60 : 0xffffff801063181b
0xffffff80f7443ea0 : 0xffffff801063133e
0xffffff80f7443f30 : 0xffffff801062d2d0
0xffffff80f7443f70 : 0xffffff8010631e99
0xffffff80f7443fb0 : 0xffffff80102b26b7
Kernel Extensions in backtrace:
com.apple.driver.AppleUSBOHCI(5.2.5)[1C94C4BC-B05C-36D4-B1A2-B0BE04A5C620]@0xff ffff7f9124e000->0xffffff7f91260fff
dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910f8000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f908af000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000010000000
Kernel text base: 0xffffff8010200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 1060195299
last loaded kext at 357954763: com.apple.driver.XsanFilter 404 (addr 0xffffff7f91ea4000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0I'm not an expert at reading panic logs but nothing you posted jumps out at me. Since you still get the panics with everything disconnected I would try repairing your hard drive with Disk Utility and reinstalling Mountian Lion.
-
MacBook 2.1 Kernel Panic on startup
Hi, Guys! I have a macbook that sometimes goes in Kernel panic at startup
I need to power of the the mac pressing the power button for some seconds, after this it boot normally...
this is the log of kernel panic:
Interval Since Last Panic Report: 11836 sec
Panics Since Last Report: 4
Anonymous UUID: 4F66CF62-080B-44E4-906F-5CDFA05FB6CA
Thu Jan 31 13:37:42 2013
panic(cpu 1 caller 0x2aaeab): Double fault thread:0x4ca3000, trapno:0x8, err:
0x0, registers:
CR0: 0x8001003b, CR2: 0x04b08da8, CR3: 0x008d6000, CR4: 0x00000660
RAX: 0x00007fff8ab11190, RBX: 0x00007fff8ab11190, RCX: 0x00007fff8ab11191,
RDX: 0x0000001000000000
RSP: 0xffffff9004b08db8, RBP: 0x00007fff5fbfd940, RSI: 0x000000110002e3ed,
RDI: 0x000000110002e3ed
R8: 0x000000110002e3ed, R9: 0x00007fff5fbfdab8, R10: 0x00007fff5fc404a0,
R11: 0x00007fff8ab261e0
R12: 0x00007fff5fc43dc8, R13: 0x00007fff5fc43be8, R14: 0x00007fff5fbfdab8,
R15: 0x00007fff5fbfdab8
RFL: 0x0000000000010093, RIP: 0xffffff80002c0c20, CR2: 0xffffff9004b08da8
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x2fbaef78 : 0x21b837 (0x5dd7fc 0x2fbaefac 0x223ce1 0x0)
0x2fbaefc8 : 0x2aaeab (0x59de64 0x59e0df 0x4ca3000 0x8)
0x2fbaf0b8 : 0x2a29d2 (0x0 0xf 0x2e3ed 0x11)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x5fbfd940
BSD process name corresponding to current thread: launchd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3
~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
System uptime in nanoseconds: 13280777169
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2 - last loaded 13191053663
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleLPC 1.5.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.driver.AirPort.Atheros21 425.14.7
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleIntelGMA950 6.3.6
com.apple.driver.AppleIntelIntegratedFramebuffer 6.3.6
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTrackpad 201.6
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.USBCameraFirmwareLoader 1.1.0
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.2.4
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2
GHz, 2 GB, SMC 1.13f3
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: AirPort Extreme, Atheros 5416: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HCC543225A7A380, 232,89 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b,
0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205,
0x7d100000 / 2So I just ran Apple Hardware Test and first two attempts get code:
4SNS/1/40000000: TB0T
Anybody? Logic Board?
And on a third attempt:
4VDC/1/40000003: VideoController -
Recurring Kernel Panic on startup, pls advise
Can I get some advice on how to diagnose a persistent kernel panic on startup?
About this Mac
Version 10.4.11
Processor: 1.67GHz PowerPC G4
Memory: 1.5GB DDR SDRAM
(PowerBookG4)
panic(cpu 0 caller 0x002E1EC4): Unable to find driver for this platform: "PowerBook 5.7".
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0X00095A10 0X00026898 0X002E1EC4 0X002C12A0 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernel version
Darwin Kernel Version 8.11.0: Wed Oct 18 10:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
No debugger configured - dumping debug iformation
MSR = 00001030
Latest stack backtrace for cp 0:
Backtrace:
0x000954F8 0X00095BF8 0X002E1EC4 0X002C12A0 0X002C1068 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernal version:
Darwin kernel version 8.11.0: Wed Oct 10 15:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic: we are hanging here...
-The PowerBookG4 starts up when selecting the local hard disk via Startup Manager (press and hold Option key); PowerBookG4 starts up when inserting the install disk 1 and selecting the local hard disk via Startup Manager (press and hold C key); PowerBookG4 starts into safe mode (press and hold Option+Shift keys).
I have verified and repaired disk permissions and the disk itself. This behavior occurs consistently with or without external devices connected.
I can work in my applications ok and everything appears to function as expected once I get the PowerBookG4 booted, but I am concerned about how long it may continue to function - got a lot to do!
Advice? very appreciated thank you! -ben
Message was edited by: Bendervish
Message was edited by: BendervishUnderstanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html
Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. Since you've disconnected external devices, USB & Firewire don't appear to be a problem. Are you using an external mouse?
Have you added RAM recently? To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
Look at 12-Step Program to Isolate Freezes and/or Kernel Panics
Cheers, Tom -
Why do I get a kernel panic during large downloads?
Since I got my new MacBook Pro, it's been doing kernel panics during large file downloads.
Getting rid of Chrome seemed to help but today the panics are back. I just started up in Safe Boot mode and the downloads (two files, approx. 500 and 300 MB, respectively) completed downloading without incident.
While I'm checking out my startup items, has anyone else seen this problem? I didn't have this problem with my Core 2 Duo.I took a look at the dump and saw a reference to an Elmedia Player kext. I remembered that in another thread someone mentioned this giving some trouble, I uninstalled it. I'll keep an eye on it to see if the problem comes back.
Here's what I've got:
Tue Jun 21 19:34:42 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800048d7a1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0x0000000000000008, RCX: 0x0000000009000000, RDX: 0xffffff8003bc79e8
RSP: 0xffffff80b133b3f0, RBP: 0xffffff80b133b3f0, RSI: 0x0000000000000000, RDI: 0x0000000000000008
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000001, R11: 0x0000000000000001
R12: 0x000000000000005e, R13: 0xffffff80ab3b8662, R14: 0x0000000000000001, R15: 0xffffff80b133b4d8
RFL: 0x0000000000010286, RIP: 0xffffff800048d7a1, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80b133b090 : 0xffffff8000204d15
0xffffff80b133b190 : 0xffffff80002d1208
0xffffff80b133b2e0 : 0xffffff80002e3f4a
0xffffff80b133b2f0 : 0xffffff800048d7a1
0xffffff80b133b3f0 : 0xffffff7f8162942b
0xffffff80b133b440 : 0xffffff800032ca61
0xffffff80b133b510 : 0xffffff8000360d6f
0xffffff80b133b760 : 0xffffff8000367c04
0xffffff80b133b820 : 0xffffff8000369628
0xffffff80b133b980 : 0xffffff80003674a0
0xffffff80b133bb90 : 0xffffff800035cab9
0xffffff80b133bbf0 : 0xffffff800035e06d
0xffffff80b133bd70 : 0xffffff800035e1ce
0xffffff80b133bd90 : 0xffffff8000344370
0xffffff80b133bdc0 : 0xffffff800032fc17
0xffffff80b133be80 : 0xffffff800032bbb7
0xffffff80b133beb0 : 0xffffff800032e5fd
0xffffff80b133bf50 : 0xffffff800032e86b
0xffffff80b133bfa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.eltima.ElmediaPlayer.kext(1.0)@0xffffff7f81628000->0xffffff7f8162afff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J4139
Kernel version:
Darwin Kernel Version 10.7.4: Mon Apr 18 21:24:17 PDT 2011; root:xnu-1504.14.12~3/RELEASE_X86_64
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 195448045347
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0xffffff7f81308000, size 0x65536) - last unloaded 112596247461
loaded kexts:
com.regularrateandrhythm.driver.RowmoteIREmu 1.0 - last loaded 39974596674
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.vmware.kext.vmx86 3.1.3
com.eltima.ElmediaPlayer.kext 1.0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AudioAUUC 1.57
com.apple.kext.ATIFramebuffer 6.3.4
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelHDGraphics 6.3.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.ATIRadeonX3000 6.3.4
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.4
com.apple.driver.AppleUSBTCButtons 201.2
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.2
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.0
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPort.Brcm4331 432.11.3
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleThunderboltEDMSink 1.0.5
com.apple.driver.AppleThunderboltEDMSource 1.0.5
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.kext.ATI6000Controller 6.3.4
com.apple.kext.ATISupport 6.3.4
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.2.0
com.apple.driver.AppleThunderboltDPInAdapter 1.2.0
com.apple.driver.AppleThunderboltDPAdapterFamily 1.2.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f1
com.apple.iokit.IOBluetoothFamily 2.4.5f1
com.apple.driver.AppleUSBMultitouch 207.5
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.2
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleThunderboltNHI 1.2.3
com.apple.iokit.IOThunderboltFamily 1.3.5
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBUserClient 4.2.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.2
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.3
com.apple.iokit.IOACPIFamily 1.3.0 -
Kernel Panic during restart and cant boot from DVD/CD
ah.. I have a pickle here guys. PowerBook G4 15 inch 1.67 1gbDDR2 ram. I just got this sucker like 2 months or less ago. I am not getting Kernel Panic during restarts every time and cant boot from a DVD or CD. they are not burned. here is the panic.log.
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
Tue Jan 24 21:56:32 2006
panic(cpu 0 caller 0x00294084): sbflush sb->sb_so already null sb=239766c
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x00294084 0x00293678 0x002935A0 0x00292EE0 0x00159A90
0x0014F7D0 0x001504C0 0x0013B0B4 0x0013B1C8 0x0011D308 0x000A9894
Proceeding back via exception chain:
Exception state (sv=0x2D203280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
can any one help me out here, tomorrow I am going to boot it into target disk mode and install from a G5 onto the powerbooks HD doing a CLEAN install and then I am going to try booting it from a DVD and doing another CLEAN intstall just cause I dont trust a firewire install for some reason. I would like to avoid all this mess if possible. ANY HELP PLEASE, either respond or email me tend0 at mac dot com. thankshaha oh man thanks for startin slow with me, but we are passed that tested RAM, start up items, prefs, tried makin a new user account, as I stated before I can not boot from a DVD/CD.. that was one of the problems so I cant run anything that involves tageting the main HDD while its mounted. I have also repaired perms, ran fsck, tried booting up DiskWarrior(didnt boot from the CD), etc. if any one knows this perticular kernel panic string and can point out what the conflict is I can resolve it but other than that I have ran the run of the mill check to see if everything is in order procedure again and again.
-
Early 2006 iMac Kernel Panics on startup
We have recently purchased a second hand 20" iMac, and after a few days it has started to kernel panic on startup, before the Apple logo disappears. A whirring when it begins to turn on has also appeared.
I shall photograph the kernel panic message if it helps. The local Apple Store have suggested that since there is a greater time period before the Apple Logo appears, the fault might be something to do with the motherboard/hard drive. Are there any suggestions here which may help us?
Thank you.KimGale wrote:
The kernel panic occurs before I can log in.
here's some to read up on:
_*Resolving Kernel Panics*_ and here _*http://support.apple.com/kb/HT2546*_.
for OS X 10.6 specifically, see this: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html.
also
_*What is a kernel panic*_,
_*Technical Note TN2063: Understanding and Debugging Kernel Panics*_,
_*Mac OS X Kernel Panic FAQ*_,
and
_*Tutorial: Avoiding and eliminating Kernel panics*_
The disk is in there, and now we can't get it out
FWIW,
Kappy wrote:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
JGG -
DVD drive broken, Mac G5 having kernel panics at startup
After nearly 5 years of steady, trouble free use, my G5 iMac started acting up a few days ago. I get what I think are kernel panics at startup. I am usually able to get it running after a few restarts but I am worried. My DVD drive became unreliable a month after my 1 year warranty expired. For some reason it won't start up with the install disks that came with the cpu but will bootup from my DiskWarrior DVD. I tried rebuilding the directory with DiskWarrior but I got the blue screen when it was almost finished. I've decided to do and Archive and install because I'm sure my problem stems from programs I installed recently. Is it possible to do the Archive and Install from my Intell Powerbook which is running the same version software. I've tried it several times, inserting the iMac install disk on my PB with my iMac connected in Target Disk mode, but I keep getting the message that the software can't be installed on this computer (the PB). Is there another way I can perform an A&I, I don't have enough space on my iDisk to use SuperDuper to create a disk image. I'm almost at the panic stage here since I use my computer for work and I'm afraid it won't start up at all at some point.
I've performed all the usual steps, repair permissions and used Disk Utility on my Firewire connect PB to repair the disk. One odd thing is FontExplorerX all of a sudden quit on me two days ago (which has never happened in the 4 years I've used it) and told me to download it again, which I did.
Message was edited by: e. jonesHi e. jones, and a warm welcome to the forums!
Other way around, with the iMac's Install Disc in the PB, boot the PB into T mode, boot the iMac with the Option key held down, wait for the Install Disk in the PB to show up as a boot option on the iMac.
But I think you have more serious problems. And, first you need to move some things off the iMac to make room for an A&I, you really need an external FW Drive right away. -
Kernel panic occurred on startup last week. Since then have tried the following-
Removed all periferals apart from Apple keyboard and mouse.
Tried each of the 512Mb ram chips on their own.
Booted from and ran successfully-
DiskWarrior - clear
System Disc, Disc Utilities - clear
Tech Tool Pro - clear
Apple Hardware test - clear
Ran Memtest on ram, came out OK
Wrote zeros to hard disc then installed a new OSX 10.4.6. Still get kernel panic on startup.
Checked LED's on logic board while starting up from internal start button. 3 light up before kernel panic. Not sure if this test indicates good logic board, power supply or not?
Can boot OK in safe boot mode. Again should that indicate logic board and hard disc OK?
Help?If all three of the LEDs light up, that means that power is getting to the places it should, but even if the logic board is getting power, that doesn't mean that it is functioning properly. You have performed all the tests you can (thanks for listing them) and nothing shows up. Call Apple and make an appointment to take it in and have a genius look at it, or, if you have Apple Care, call them and see what they suggest.
-
10.6.8 kernel panic at startup (fixed)
**excuse my english since I'm french**
Like a lot of people, I've installed 10.6.8 through software update. And I've experimented kernel panic at startup. So, I unplugged everything (my two USB hubs with multiple peripherals) except the original Apple keyboard and Apple wired mouse. And restarted in safe mode. Downloaded Apple 10.6.8 combo update, install it and restart. Everything went fine. Great.
But as soon as I plugged back my USB hub, kaboom! here's come the Kernel Panic again.
So, one by one, I plug and unplug my peripherals. To discover that my old optical wired two button mouse (love that mouse ;-))) was THE problem. Even when it's plugged directly in one of the USB port on my Mac Pro. I've try with three different optical USB wired mouse, one Logitech, one Dell and one Verbatim (my old mouse): kaboom! Kernel Panic. With my Microsoft optical wireless mouse? No kernel panic. 10.6.8 crashes only with third partys wired mouses, except the Mac wired mouse.
Voilà.
So, I'm stuck with the old wired Apple Mouse (that I hate). But no more kernel panic.
Hope my story can help someone.
And Apple, I missed my optical two buttons wired mouse. ;-))I have the same problem, but only on one of the two iMacs that I updated to 10.6.8.
The first installation went smoothly, and I haven't had any trouble with the mouse or anything else on that iMac. A Samsung color laser printed continues to work just fine.
The second installation seemed to have a hiccup -- after I had authorized the update there was a second update screen. That sequence finished with a kernel panic, which continued through several attempts until I unplugged the Logitech laser mouse.
That Logitech mouse works perfectly on the first updated iMac, and the other Logitech mouse from that computer causes a kernel panic on the troublesome iMac.
I'm now using an Apple bluetooth mouse, which I'm getting used to - but I would still prefer the option of my good old Logitech mouse.
Another problem is that I can't print to a networked Konica-Minolta bizhub C451. Tried the combo 10.6.8 updater and reinstalled the Konica driver -- but still no dice. -
Kernel panic during Leopard 10.5.3/4 net-installation
Hi,
We have built universal Leopard images on net-install server. I am getting kernel panic during net-installation of 10.5.3 and 10.5.4 images on old iMac bubble G4 machines. These images's net-installation works perfect on latest machines like G5, Intel MacPro, iMac G5.
I am not getting any problem with 10.5.2 image with this old bubble machine. But this problem occurs only after 10.5.3 images. Here is a small part panic trace, (Sorry, I couldn't get full trace since there was no way to copy it)
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.2.8)@0x15223000->0x154a3fff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x13624000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0x147f000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x139e5000
com.apple.iokit.IONDRVSupport(1.5.2)@0x14f7f000->0x14f96fff
dependency: com.apple.iokit.IOPCFamily(2.4.1)@0x13624000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x139e5000
Exception state (sv=0x13675c80)
Any help will be appreciated.
Thanks,
RohitHi Rohit;
It appears your Leopard question has been posted in the OS 9 forum. You might have a better chance for an answer if you report over in the Leopard forum.
Allan -
Can't get past kernel panics on startup
Like the title says, I'm unable to get past kernel panics on startup. I know next to nothing about the technical side of computers, so I'll just explain the whole process of what I've gone through. Earlier today I got a kernel panic after waking my computer from sleep. I restarted and everything was fine. I probably should have looked in to the cause of the panic, but I just went on using the computer as normal. Later, I returned to the computer, woke it from sleep, and got another kernel panic. I restarted, and my computer got to the Apple logo and gray spinning wheel when it froze. No kernel panic, just a frozen wheel. So I shut it down, restarted it again, and this time I got to just a gray screen (I don't remember if the Apple logo had shown up or not, but there was no spinning wheel). It hung on that screen for a while, then the fans started running like they were trying to take off a jet engine, so I shut it down. I tried restarting it once more, and it got to the spinning wheel screen when another kernel panic happened. I restarted the computer, and tried this a few more times, getting kernel panics each time. So I let it rest. A few minutes later I tried it again. This time it got even further, and I was pretty hopeful that I'd at least get the computer running again. It got past the gray spinning wheel, to the blue screen that usually shows up before the "cosmic wallpaper" and login screen. At that point it hung on that blue screen, and the jet engine sound started up. Now I take out my 10.5 instal disc. I back up with Time Machine, so I'm just going to hope reinstalling and restoring from Time Machine works out. I stick in my 10.5 disc, hold down the 'c' key and start up the iMac. Eventually it gets to the spinning wheel screen and a kernel panic. That's where I am now. Any help? I have a big paper due on Tuesday, so there's a ticking clock.
Thanks a lot
MikeHi - I have a similar problem here, running snow leopard 10.6. I am also not technical.
I went out & left my mac on, and when I got home it had switched itself off and on restart I got to the grey screen + Apple icon. Unfortunately I have never backed up my data!! Tried starting in safe mode (holding Shift key) and get the following message every time I try this:
panic (cpu 0 caller 0x560d25): "Unable to find driver for this platform: \"APCI\".n" e/SourceCache/xnu/xnu_1504.9.37/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called:<panic>
Backtrace (CPU0),Frame : Return Address (4 potential args on stack)
BDS process name corresponding to current thread: Unknown
Mac OS version: Not yet set
Kernel Version: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root: xnu-1504.9.37~1/RELEASE_I386
I have tried booting from the Leopard disc but can't do a repair as it doesn't seem that it can find the Mac hard disc. Have also tried starting holding the <option> key and get a Hardisc icon displayed with an arrow beneath, and when clicked a progress bar appears for maybe 30 seconds, then disappears & it just carries on in grey screen mode with spinning wheet & Apple icon.
I want to know if I just have to concede that I have lost my data and need to reinstall the OS, or it could be worth taking to a Mac repair agent to try to retrieve it -
I'm getting a kernel panic on startup after restore hd
Long story made short...installed Google Music to use with my new phone...next day Mac running slow, left it running while I was out, came home to frozen screen...booted in safe mode and clicked off everything that was running in background. Tried to reboot and it kept shutting down when reaching grey screen. (I orginally had leopard and upgraded to snow leopard) got my OSX (leopard) install cd and booted to disc, disk utilities and check disc...originally would only let me verify, which failed, then unmounted and was able to get repair disc...unable to repair. I erased hd and then restored from my time machine backup, now when I boot I get kernel panic on startup. I'm running of external hd which I formatted and installed leopard essential software. So my question is, is my HD shot? Are there other step I can take? I can't afford to bring this in to someone. This is most of what my screen says when I boot:
Panic(cpu 1 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 8\n"@/SourceCache/xnu/xnu-1504 . 15 . 3/bsd/kern/kern_exec.c.3145
Debugger called: <painic>
Backtrace (cpu1), Frame : Return Address (4 potential args on stack)
and the a list of numbers....
any and all help would be appreciated to help me resolve thisBump, can anyone help?
-
Kernel panics during TM backup
I have been having problems with kernel panics during Time Machine backups and I would like to find out if others have had similar experiences. If this is a problem unique to my configuration, then I need to do more work. If others are having the same issue, then perhaps I just need to wait until a fix is issued.
Some background, I am using TM on two computers, an early 2006 iMac and a first generation Aluminum 15" Powerbook. On the iMac, TM is now very reliable, on the PB, it will ALWAYS kernel panic at least once during a large backup, sometimes 2 or 3 times before it manages to finish the backup. Since I have been playing around with backup disk configurations, I've made several initial backups, so I've also seen quite a few kernel panics, but ONLY when TM is running a large backup.
Are you hit with kernel panics during TM backups? I see some discussion along those lines in this forum.
The most recent initial backup was with Spotlight disabled and it DIDN'T panic. This was unusual. As TM is adding files to the backup disk, Spotlight is busy indexing the new files at the same time. It is possible that the two are not playing well together on the lower performance machines, such as this 1.25 GHz G4. By adding the backup disk to Spotlight's privacy list, Spotlight is inhibited from indexing the backup disk.
- gwsFor information, this problem appears to be due to some unique problem with my particular computer.
I had been having 2 or 3 kernel panics every day. Finally, I did a Safe Boot and the panics ceased completely. Not one in the last month. Looks like it was some kind of corrupt data that the Safe Boot cleaned up.
- gws
Maybe you are looking for
-
I am working on jsp I want to create a file object with path "http://localhost:8080/examples/" so i have tried to create file with URI as parameter but i'm not able to succed. so please do help me. thanks in advance. actual situation is any remote cl
-
After a PC crash I managed to restore my iTunes Library only partially. My music is all there. But my ratings and playlists are missing. Please advise how I can fix this. On my IPod Classic a still have all the music and the playlists. Is it possible
-
Grant debug connect session to user
I understand that if DBA hasn't granted following option to "user" following way: grant debug connect session to user;, then "user" wil lget following error when she tries to debug: ORA-0131:Insufficient Priviledges Debugging requires Debug connect s
-
Sales and Support for Foreign Countries?
Although I'm not familiar with the exportability of MATRIXx, I assume foreign sales are permitted (and encouraged). If I work with a foreign customer, to whom in NI should I direct their questions about pricing, planned development, and support? Than
-
How do I Validate a Successful Migration?
What are the steps to follow to validate a successful migration in sharepoint.