Logging Problems on CSS11503 - please help

Hi,
1 of our CSS11503 is not functioning properly. Our ITO system is receiving "server down" messages for services but the "server up" message is not coming through.
We have 2 load balancers with identical config, the only difference I can see in them is the following
when I do a "show log-state", the load balancer that is not sending the server up messages has the log level set to "warning" were as the one that works ok is set to "debug".
I have stated in the config log level 7 for our ITO managment system but this value in "sh log-state" is still the same???
Any ideas on how to change this to debug on the css that is not sending the server up messages.
thanks

The UP message is generated at level '5'.
So that's what you need to change indeed.
Usually the problem is that the logging level stays stuck in '7' not '4'.
Are you certain that the command is there ?
What software version ?
The procedure to recover when stuck in level '7' is below.
You can give it a try.
-Reboot and interrupt the boot going into offDM.
-shift T (technicians menu).
-choose "1" for configure.
-then "3" for set logging flags.
-"2" for set logging level (set to level 4).
-then "r" until you're back to the main menu.
-reboot.
Gilles.

Similar Messages

Login problems...please help!!!!

My computer is having software glitches much like my old windows units did with viruses. I tried to correct problem with repair disc but now I can't get past my login screen because my computer won't recognise my password assigned to it. I don't mind erasing hard drive but don't know how to do it w/o logging in 1st. Please help!!

What you want to do is Boot from your install DVD by holding down C while your computer is booting. Then you can either do one of two things.
The first is an Archive and Install, this will try to keep all of your personal settings and applications intact, but it will completely reinstall the operating system.
The other option is just a full clean install, this will wipe everything on the hard drive and you will have a fresh copy of OSX installed.
Hope this helps, if you dont understand something let me know.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

HT201263 my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard
Regards,
Amar

See the "More Like This" section over there ===============>
In the future, search before posting.

It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it, it won't move. I have never had this problem before. Please help.

It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
P.S. I have tried other effects including transitions and it still won't let me drag.

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
mechanical fault , contact Apple for service and parts replacement.

I want to ask how to downgrade ios 7 to 6.1.3, because a lot of problems ios 7. please help

I want to ask how to downgrade ios 6.1.3 to 7, because a lot of problems ios 7. please help

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.

Error getting license. License server communication problem: E_ADEPT_NO_TOKEN. Please help

I try to download my ebooks on my laptop but receive the onscreen message, Error getting license, License server commucication problem: E_ADEPT_NO_TOKEN. Please help?

It means, the URLLink.ACSM file is corrupted. Please contact the book store and ask them to check whether the configuration in the server side is correct for that book.
One of the simple setting in the server which can case this issue is, setting the book for loan in server and providing the purchase option in the book store or vise verse.
Hope this solves your problem.

Hi, I already installed photoshop trial version and three weeks later I paid on-line for 300 Baht for buy it but it still ask me to join and pay for it. How can I update it in my log in account. Please help.

Hi, I already installed photoshop trial version and three weeks later I paid on-line for 300 Baht for buy it but it still ask me to join and pay for it. How can I update it in my log in account. Please help.?

You do not buy Photoshop for 300 baht, you are renting it for that much a month. You set up an account with a valid credit card and to see if it is active, you go here. https://www.adobe.com/account/my-products-services.html Look under my Subscriptions.
If all is good, then with the same Adobe ID/password, select "License this Product" and sign in, or Help > Sign in.
That will license it.
Gene

HT1386 i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

From http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB

Mac mini intel shut down problem !! please help !!

hi !
following problem, mac mini intel single core does not shut down, shut down process last 10 min and more (bluescreen, black wheel running) but does not shutdown at all!!
When I log off my user and then press the shutdown button at the login window, it shuts down normally.
Any ideas???
Feeling like being in windows times???
please help
thanks
tobias

Good catch. I would never have though of that since I eagerly anticipate each chance I get for a clean install.
I much prefer to get a clean start and consciously change the things I need to work - often I find that the defaults really are better and would otherwise be stuck in habit...

My updates are failing. Adobe application manager may be damaged. I have downloaded and installed a new copy and the problem persists.   Please help.

I am trying to update Photoshop CS6 in order to read my camera's RAW files. It is a camera that is supported by Adobe Photoshop CS6. However, when I try to get the Adobe Application Manager to update the software, it fails to do so. (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.")
I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues. Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg. However, this update also fails stating that my Adobe Application Manager may be damages. Download and install a new copy of Adobe Application Manager. Which puts me right back where I started.
I have also taken the step of completely reinstalling Photoshop CS6. This did not solve the problems outlined above.
Please help!

reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates.

Trackpad and Mouse click problem!! PLEASE HELP!

I have been having this weird problem which is having to click several times on something of it to work. Mostly I have the problem with Safari and sibelius 6.0 which I work with.It doesn't click and its frustrating.I bet its not the trackpad as I happen to have a magic mouse and it's the same with that too.I have to click several times on for example "Close" the tab button for it to work.
PLEASE HELP!

Kirstiee, login to another User account and test it in there.
sahba99, you would need to drag the whole preference folder to the Desktop and reboot. If it works, you know it's a preference file in that folder. Keep dragging a bunch back at a time and reboot (or log out and back in) until you narrow it down to the corrupt file. It's kind of like troubleshooting an extension conflict back in the pre-OS X days.
Dave M.
MacOSG v.2.0 coming April 1, 2010! No fooling! Check it out!
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Fatal problem.. Please help me..

Hi all
I have a fatal problem when executing any Java based application.
when running an webApplication I get this error:
Null pointer exception Internal error 500
When running a server-client application I get this one:
java.io.exception No output file could be built
Please help me

Hi!
It seems to me that you are writing something somwhere. If you are writing to disk make sure that you
have the necessary permissions to write.
What does the application do? Does it log something, write or what?
Regards,
Mario Udina

Logging Problems on CSS11503 - please help

Similar Messages

Maybe you are looking for