Logging same NC code for multiple components

Hi,
When logging NC codes in SAP ME 6.0 it is possible to log the same NC Code (defect) against many ref-des for
multiple components.
However when logging a secondary code (Action) for the previous primary NC Code all the choosen ref-des and components
don't get copied..
Is this how it is supposed to work or is there a setting somewhere so that all ref-des and components gets copied?
Best Regards,
Johan Nordebrink

Hi Johan,
The matter of your question is related to Ref Des List re-desinged for 6.0.
Overall situation looks like a design gap because:
- no explicit statement in the documentation describing the case of copying multiple Ref Des'es;
- the case of 1-to-1 relation between Component and Ref Des is mentioned in the context of auto-population of these feilds on tabbing out if one of the field is populated;
- the case of single Ref Des is widely referenced in the context of VTR that is a new feature in 6.0.
So, if you need this to be reviewed by Product Mgmt (maybe they agreed to identify this as a bug), as usually you should either ask your SAP ME Consulting representative or submit a support ticket (depending on whom you pefer to talk with ).
Regards,
Sergiy

Similar Messages

Same vendor code for multiple company codes

Can we have same vendor code for two different company codes ?

Yes u can use same code of vendor in different company code
only u will have to extend this vendor code to other company code in xk01
this is possible as number range is set on vendoe Account group
and same vendoe code and be used in 2 or many different co codes with different company code data
hope this helps
Edited by: Umakant Bhangale on Oct 11, 2010 5:35 PM

Same ISO Code to multiple UOM

Hi Friends,
Can we assign same ISO code to multiple UOM's???. If so, what will be the efeect??
Thanks in advance,
Steve.

Hi,
Assignment of same ISO code to multiple UoM can be done, but the primary code checkbox must be ticked only for one, else would cause conflict for EDI.
The SAP help reads as below:
An ISO code can be assigned to several internal measurement units.
Use
The ISO code is important for EDI. It is used to convert the internal SAP
measurement units into standard measurement units. Data exchange
via EDI requires internal measurement units to be converted into standard
measurement units.
Hope the above answers your query.
Regards,
Vivek

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Can I use the same email address for multiple seats in Creative Cloud for Teams?

Can I use the same email address for multiple seats in Creative Cloud for Teams?

No. http://www.adobe.com/products/creativecloud/faq.html
Can I buy more than one membership to an individual offering of Creative Cloud?
No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

Is it possible to use the same OSSO/OID for multiple R11 and R12 instances?

Hello guru's,
We have multiple R11and R12 instances that should be configured for Oracle SSO 10.1.4.3. For OID, we are still trying to decide between OID 10.1.4.3, or OID 11g. OAM is not an option because we also also need OSSO integration with Siteminder. We will also need to SSO-enable Discoverer an Forms.
I have successfully configured SSO for a single-instance EBS R12, but not for multiple instances, let alone include R11 and other components into the mix.
Do you have any special tips, guidance or lessons learned when SSO-enabling multiple instances into the same SSO/OID?
Thanks!
Maria

Interestingly, the article talks about using the same SSO/OID for EBS, JD Edwards, Peoplesoft multiple R11 instances, but did not mention 'multiple EBS versions'. Am I just being picky or there was a reason for it not being mentioned?In Steven Chan blog (in the same link), see the following:
Comprehensive Single Sign-On Solution+
If you have one or more E-Business Suite Release 11i instances and are tired of maintaining users separately for each environment, you can create a central OracleAS 10g environment and manage all 11i users in one place.
If you have a combination of PeopleSoft, JD Edwards, and the E-Business Suite in your organization, you can use OracleAS 10g to manage users for all three environments centrally.
If you have a combination of the E-Business Suite and custom applications based on Oracle databases or OracleAS 10g technology, you can use OracleAS 10g to manage users for all applications in a single place.
Thanks,
Hussein

Can we use the same credit card for multiple customers???

One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
Thanks in advance for any help or guidance you may provide.
SJ

I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
Thanks for your response though.

How to use Same Inspection plan for Multiple Plants?

Hello,
When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
Thanks
SAP Fans...

Dear,
For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
Regards,
Prasobh

How to disable a custom designed Tx code for multiple user at a time

Hii ,
I have designed a screen in module pool for end user to make entries in the screen and when he saves the data is saving in standard table and ztable. the main field in the screen is Batch number..from that batch number bag number will be generated. and consumed quantity will be saved in that bag no.Bag number will be generated like first 5 digits of batch number and bag number series of that batch number. for example if batch number is 12345 and already 5 times packing is done for same batch..last bag number in the ztable will be 123450005.so next time when user tries to pack using same batch number the new bag number will be 123450006 for batch 12345.Problem here is when user tries to make enrties in that Tx code and at the same time if another user opens same Tx code to make packing for same batch both of them are getting same bag numbers before saving.
I have called Enqueue and Dequeue FM's but still at a time for same batch user is able to do the packing.now my issue is i want to restrict 2 user to use same batch while packing in that Tx code.
I have written following code for enqueue and dequeue technics
data: B_matnr type mara-matnr,
       B_charg type mchb-charg.
data : i_temp type TABLE OF zpackhdr WITH HEADER LINE,
       i_temp1 type TABLE OF zpackhdr WITH HEADER LINE.
move : 1110 to WA_BCH-werks,
       chk_matnr1 to WA_BCH-matnr,
       v_bcharg to WA_BCH-charg,
       vgrade to WA_BCH-grade,
       new_batch to WA_BCH-bagno,
       m_baleno to WA_BCH-baleno,
       b_date to WA_BCH-indat.
APPEND wa_bch to i_bch.
clear b_date.
READ TABLE i_bch INTO wa_bch INDEX 1.
    B_MATNR = WA_BCH-matnr.
    B_CHARG = WA_BCH-bagno.
concatenate B_matnr B_charg into
    WA_BCH-objek respecting blanks .
   modify I_BCH from WA_BCH index sy-tabix.
CLEAR: B_MATNR,
           B_CHARG.
call function 'ENQUEUE_EMMCH1E'
EXPORTING
   MODE_MCH1            = 'E'
   MANDT                = SY-MANDT
   MATNR                = WA_BCH-MATNR
   CHARG                = WA_BCH-BAGNO
if sy-subrc <> 0.
endif.
call function 'DEQUEUE_EMMCH1E'
EXPORTING
   MODE_MCH1       = 'E'
   MANDT           = SY-MANDT
   MATNR           = WA_BCH-MATNR
   CHARG           = WA_BCH-CHARG

I do understand what u say...mine is a custom designed screen...when i open that screen i have around 15 input fields in which batch is obligatroy...when i give batch and hit enter all the other fields will be filled automatically picking from the table which are relevant for that batch..for example..material,order etc are picked from table...and bag number field will be generated taking first 5 digits of batch and followed by 0001 if its afirst time entry for that batch....so when a user is opening that screen in 2 different windows and giving details without saving any of the screens...in both screens bag number is generating as 001...and when saving it ..its saving 2 entries with same bag number...so i have created a lock entry for afpo table taking order field...so when a user opens 2 screens with same batch...and giving entries in those 2 screens without saving..he is getting same bag numbers as 001.....now when user saving the first screen and coming to second screen to save...he is gettimg message 'ORDER CURRENTLY BEING PROCESSED'..but after the data gettng saved in first screen,then when he saves the second screen it is getting saved...with same bag numbers as 001.so my issue is here...when he saves first screen and comes to second screen to save it the user should get that error message and should come out of the screen....so that he can make a fresh entry for that batch and bag number will be generated as 002 for that batch...
Regards,
venkat.

Issues of using same enhancement set for different components

Hi experts,
I have an issue when using the same enhancement set(ZCRM_EHSET) for two different components IUICMD & IUICMRD. Component IUICMRD has two views IUICMRD/MainVS & IUICMRD/MeterReading and these views have been copied to Component IUICMD.
Now, i am getting the following error, when i try to access AccountSearch view of component IUICMD
Context initialization failed in view IUICMRD/MeterReading of UI Component IUICMD
An exception has occurredException Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_IUICMD_BSPWDCOMPONENT_IMPL is not compatible, for the purposes of assignment, with target type \CLASS=CL_IUICMRD_BSPWDCOMPONENT_IMPL
Method: CL_IUICMRD_METERREADING_IMPL=>DO_INIT_CONTEXT
Source Text Row: 10
Let me know how i can solve this. Is there any precautions that i should have taken before using the same enhancement view for two different components.
Thanks in advance.......................
Regards,
Prabahar

Hi Bharathy,
Thank you for the reply which helped me to come close to the solution.
I hope you reply will solve the second part of my question where i get MOVE_CAST_ERROR.
My first Question is still unanswered and i request you to provide solution if you have any. I worked on CRM 4.0 and CRM 2007 is new to me.
My first question is below.
I have two components IUICMD & IUICMRD. I have enhanced 4 views in the first component IUICMD using enhancement set ZCRM_ENHSET. There is no problem with that. But when i try to use the same enhancement set ZCRM_ENHSET for enhancing the second component IUICMRD, it's enhanceable in enhancement set. But 2 views IUICRMD/Meterreading & IUICMRD/MainVS is also copied to first component and available as enhanceable views in First component.
Is it the std behaviour that views from one component is copied to other when you try to use the same enhancement set? Kindly let me know if you faced similar situation.
Best regards,
Prabahar

Same error code for two different errors

I have a simple state machine with a few states, two of which are read ini file and read GPIB data. I also have an error handling state where I would like to handle all errors. Errors are checked for on each iteration of the loop, passed by shift register. However, I can't just unbundle the error cluster and wire the error code to a case structure because if the ini file doesn't exist (error code 7) I want to exit the program. But if I get error 7 from the gpib (Nonexistent GPIB interface) I want the program to continue running. What is the best way to track where the error is coming from so I know how to handle it when two error codes for different errors have the same error code value?
Message Edited by for(imstuck) on 01-27-2010 03:47 PM
CLA, LabVIEW Versions 2010-2013

Another option is to check the existence of the file before opening the config file, then exit the program if nessecary. Relying on error codes might be a bad option.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

SQL Command code for multiple value string parameter

Hi,
I'm using crystal 2008 and there is a check box for multiple value SQL Command I need some help in writing the SQL Command code for oracle (or sql server) for a multiple value STRING parameter.
Thanks in advance,
Marilyn

I could be wrong here, but I do not believe you can pass a multiple valued parameter to an SQL Command data source. How I have gotten around this in the past is to put the "real" report into a subreport. In the main report, create a formula field (basic syntax):
formula = join({?parameter}, "|")
Then, use this to pass the selected values to the subreport's parameter (call it {?sr-parm}). The SQL Command in the subreport can then use that (MS SQL):
select *
from table
where charindex(table.field, '{?sr-parm}') > 0
HTH,
Carl

Make IT0105 accept same SAP userID for multiple PERNR

hi,
How do i make IT0105 accpet multiple SAP UserId for multiple PERNR for a single PERSON ID. this has to be done for a Concurrent Employee landscape.
All PERNRs of a single PERSON ID should have same userid in 0105. How do i copy uname for all PERNR.
ags.

Hi,
This is a standard control.
System checks the value MAIL SAPSY in table T77S0 and for that specific subtype of 0105 does not allow multiple entries.
Changing the value in T77S0 - as indicated in its help - would harm your system and is not recommended.
Regards,
Dilek

Logging same NC code for multiple components

Similar Messages

Maybe you are looking for