Logging stops on the BO Server

Hi all,
We have some trouble with the logging on our server.
In fact, the logging just stops. No more logging after random hour (no specific action is reported to be done when it's happening).
I'm speaking about the logging : C:BOXITomcat55logsdswsbobje.log
Is there any issue or SAP note about the problem? I already try to find in the SAP Notes rep but maybee I'm not using the right terms...
We're using BOXI 3.1 SP5.
Thanks in advance for your help,
Jérôme
Edited by: jerome.vervier on Feb 1, 2012 9:55 AM

Hi Jerome,
When you create the dswbobje.log there are options to set the logfile limit and the append state:
log4j.appender.DSWSBOBJE.Append=true
log4j.appender.DSWSBOBJE.MaxFileSize=25MB
Have you checked that you have a large enough size for the logfile and also is the Append state set to TRUE?
Kind regards,
John

Similar Messages

  • SLD server has stopped; start the SLD server in Administration

    I am trying to configure Technical Systems in SLD (for deploying a webdynpro application which has models). Logged in as Administrator. I see this message when I login from the portal (https://host:port/sld):
    "SLD server has stopped; start the SLD server in Administration." And all the links are greyed out.
    When I log in to the Visual Admin, services->Sld->and tested the connection (with same ID as Administrator), I see "connection test failed CIMClientObject"
    What ID, password should I be using for testing the connection for SLD in visual Admin. Or is this related to ID password at all.
    Thanks
    Srinivas

    Thanks for the replies!
    I still have the same problem.
    When I select the SLD Data Supplier under services in Visual Admin, I see an error on the task bar at the bottom: SLD_Collector_Task
    When I open this item, I see the following error message:
    "2008.12.10@10:51:20: HTTP call failed: Failed to send HTTP data: 503 : Service Unavailable. Please check if the target SLD system is available and the SLD bridge is started there"
    Is this something related to SLD configuration.
    Thanks
    Srinivas

  • Will not allow me to add caldav account (Calendar couldn't log in to the CalDAV server "webdav.skedge.me"error message)or I get the not a secure server message with the option to continue...but then it sticks it wont continue

    I WISH I HAD NOT UPGRADED...THIS IS A NIGHTMARE.  I need to sync my appointment scheduler that is embedded in my website to my ical (which was easily done through publishing with the previous version) since I have upgraded I dont have the option to publish...but can add the cal DAV account, which I tried to do but I get a "Calendar couldn't log in to the CalDAV server “webdav.skedge.me”." error message if I go through edit ccount> add other account  in system prefereneces otherwise I get a not secure server warning that will not continue when I select continue if I simply try to add an account using the + sign options at the bottom left of the systems preference pop up window
    found a potenital fix (that I think would work if I could understand how to do what they are telling me to do) it said to configure webdav sharing for active directory accounts...tried to follow the instructions...could not understand them (very techy instructions). 
    FYI to any one that may find it in thier heart to answer this...I AM NOT COMPUTER LITERATE I am a veterinarian not a computer programer...so please but things in terms I can understand...i dont know what root access or server admin means...I dont know how to edit config files or even open directories with terminal ...i dont know what pico is or how to open it on my computer.  Thanks
    If know one can help can someone please tell me how to un-upgrade..this *****!
    thanks
    Catherine

    Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    * https://support.mozilla.com/kb/Secure+Connection+Failed
    You can retrieve the certificate and check who issued the certificate and other details like when it is valid.
    * Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    * Click the "View..." button to inspect the certificate and check who is the issuer.

  • Work Folders Stopped Working - The sync server needs the user's current user name and password

    Our Work Folders deployment has just stopped working.
    Once the user has logged in to ADFS they get the following error message "The sync server needs the user's current user name and password (0x80c80300)"
    At the same time we see the following error in the file servers SyncShare event log:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-SyncShare" Guid="{9E6153AD-A829-4B70-B997-8E463A7A111C}" />
    <EventID>1013</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-03T14:48:32.922225100Z" />
    <EventRecordID>1178</EventRecordID>
    <Correlation />
    <Execution ProcessID="1988" ThreadID="2800" />
    <Channel>Microsoft-Windows-SyncShare/Operational</Channel>
    <Computer>fileserver.domain.com</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    - <EventData>
    <Data Name="User">eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6ImVoZWxJMUFwWm9HT2VZdXU5NGZZb21tamUzayJ9.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.eCefzniju5qjqxIDdC2KCefkiNBNoGV-B1zg8EsnygUyV0LilPpANpv5uH75JJ9ekv9BN0vz7m6QezHEN4dYc5Z-6UJCzm7Wz6s1yNqVz-Sq5_wf_RrrHkxntcLXT2LHyyLN6ZxJy8uOF4vLw_fLsDzrNHkpaKUoevLAvNLI503IAiKDijKmQ0Qa2hZGsDT57yhKLGtjMXdqwx6FpFpP6vxA9qoUlR1E-tlt0ezTSD8j36djV9VbFpTlfeiH26D0n92T4exQCJkPdVzR42G7KbYyo9Acu0GGf7dnameWMQV9lT-Jtb7hH9xNReuVSVzqgtstsSDJR0mCsKJfLrdKVw</Data>
    <Data Name="Error">0X80C80021 - ECS_E_SYNC_ADFS_UNAUTHORIZED</Data>
    </EventData>
    </Event>
    I have attempted re creating the setup using several blog posts including:
    http://blogs.technet.com/b/filecab/archive/2014/03/03/deploying-work-folders-with-ad-fs-and-web-application-proxy-wap.aspx.  Including deleting all WAP rules, deleting and recreating the Relaying Party Trust and obtaining new certificates for the file
    server.
    ADFS and WAP are working correctly for our Office 365 federations and on-premise SharePoint, Exchange and other web applications
    If I turn ADFS authentication off on the Work Folders server I can successfully connect and setup work folders on a domain joined computer, however as soon as ADFS authentication is enabled I get the above error. 

    Hi,
    As you expressed, it should be an authentication issue. 
    I assume it will work by selecting Windows Authentication instead of ADFS in step shows in following picture. 
    The article also mentioned that the certificate is needed in following computers.
    The self-signed AD FS certificate will need to be exported and installed on the following machines in the test environment:
    Work Folders
    Web Application Proxy
    Domain joined Windows 8.1 client
    Non-domain joined Windows 8.1 client
    Thus I would like to confirm if certificate is also imported. 
    If you have any feedback on our support, please send to [email protected]

  • How come My Sites can only be created when logged directly onto the Sharepoint Server?

    Hello Community
       In Synchronization I populate the container with OU's that contain
    Service accounts, user accounts created in the Sharepoint farm and a
    domain local group containing a OU with all of the trusted user accounts.
       AFter populating the container I perform a User Profile Synchronization.
       After the User Profile Synchronization finishes MIISClient shows "success"
    including the OU containing the trusted user accounts.
       Although I cannot Find all of the trusted users individually in Manage User Profile I
    can find them with the peoplepicker when I add them to the web application
    and the My Site Host application.
       The problem is if I logon directly onto the Sharepoint server with an account created
    in the Sharepoint farm I can create a My Site with that account. But if a trusted user
    logs onto their computer and tries to create a My Site they get an error stating
    the page can't be displayed.
        Even if I click "sign on as a different user" on the trusted user computer
    and with a user account that was created in the Sharepoint farm and try to create a
    My Site I get the error stating the page can't be displayed.
        The reason the page can't be displayed on the trusted users computer is because although
    it can access the My Site Host application it cannot access its default.aspx page.
        So the question is how come when creating a My Site the My Site Host default.aspx page
    cannot be accessed from the trusted user computer but when creating a My Site directly on
    the Sharepoint Server the default.aspx page can be accessed and the trusted user and/or the
    user account created in the farm can access the default.aspx page and create a My Site?
        Thank you
        Shabeaut

    What does that mean "trusted user computer"?
    How many servers you have in farm?
    Are you using a single domain or there are multiple domains involved ?
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • ITunes 10.5.3.3 "You must log in to the proxy server" error

    Hi,
    I recently upgraded my iTunes to v10.5.3.3 running on a Windows 7 machine at work. I have had no issues with previous versions, but this new version occasionally gives me the error below:
    I can start iTunes without a problem, when I go to the store and start browsing I see this error, but not all of the time. Around 80% of the time when clicking a link in the store I see this error.
    My guess would be that the problem arises from network security. Perhaps this new version of iTunes will not pass user name and password to our proxy server. I believe that our proxy will not allow anonymous requests. Presumably something changed wiht the latest update to iTunes.
    This issue is stopping me from using iTunes in the way that I would like and I would appreciate any feedback on how I could resolve the problem.
    Regards
    Ben Lait

    Hi
    As per the information and details provided by you, to connect the Outlook to the proxy server, please follow these steps: -
    This issue may occur if one or more of the following conditions are true:
    The connection to the server requires a certification authority (CA).
    You have not trusted the certification authority at the root.
    The certificate may be invalid or revoked.
    The certificate does not match the name of the site.
    A third- party add-in or a third-party browser add-in is preventing access.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • PhpMyAdmin Error #1045 Can not log in to the MySQL Server

    Having trouble when ever I enter in my username and password it won't log in  /etc/webapps/phpmyadmin/config.inc.php here is a snippet of the config where I suppose the error is being generated:
    $cfg['Servers'][$i]['host'] = 'localhost';
    $cfg['Servers'][$i]['connect_type'] = 'tcp';
    $cfg['Servers'][$i]['compress'] = false;
    /* Select mysql if your server does not have mysqli */
    $cfg['Servers'][$i]['extension'] = 'mysqli';
    $cfg['Servers'][$i]['user'] = 'root';
    $cfg['Servers'][$i]['password'] = 'mypasswordhere';
    $cfg['Servers'][$i]['AllowNoPassword'] = FALSE;
    * phpMyAdmin configuration storage settings.
    /* User used to manipulate with storage */
    // $cfg['Servers'][$i]['controlhost'] = '';
    // $cfg['Servers'][$i]['controluser'] = 'root';
    // $cfg['Servers'][$i]['controlpass'] = 'mypasswordhere';
    Last edited by justin91101990 (2012-12-31 00:48:32)

    You do not put username and password in config.inc.php, this is only if you use $cfg['Servers'][$i]['auth_type'] = 'config';
    but this means that the user is directly logged in and only when you have created the user in mysql first. This method is not recommened. just comment out user and password and then create the user IN MYSQL. If you have not set a root password yet you can do that by executing mysql_secure_installation on the command line. Just test the user to log in to mysql directy from the command line like this "mysql -u user -p". Only if you can log in from the command line, but not from phpmyadmin, then something with phpmyadmin configuration is wrong.

  • Read the c2 log file of the sql server using java

    Hi All,
    i want to read the c2 log file using the core java. how is it possible ? if anybody knows about this please give me the sample code to help me.
    i am also searching on net but i am not getting any result about this? so please help me to doing this task?
    awaited person

    Hi All,
    i want to read the c2 log file using the core java. how is it possible ? if anybody knows about this please give me the sample code to help me.
    i am also searching on net but i am not getting any result about this? so please help me to doing this task?
    awaited person

  • Sap sid _00 service is stopped while the production server is started.

    while i try to start the sap production server,  sapprd_00 service is stopped.
    when i try to start the service manually. it gives a message saying,
    "the service sapprd_00 started and stopped since it has no work to do"
    can any body help me with this issue
    Ravi
    Yadutech
    Basis Consultant

    Hi Yadutech,
    First start sapprd_00 manually with automatic properties.
    then try to your sap production server.
    Hopt it helps
    Regards,
    Arun

  • Single User Outlook 2013 new setup fails on "Logging on to the mail server"

    Auto-discover works fine, Establishing network connection - green check, Searching for the user - green check, then on login it fails with "The connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this
    action".   This issue just started happening for a single user, and follows the user to any PC we try to setup Outlook on, so it definitely seems to be an issue with her specific mailbox or account.  OWA does work, and she's able to sign in
    and check her mail here.
    Is there any kind of maintenance that can be ran to fix this?  Any idea's why should would have been working fine for months, and then this issue come up out of the blue?
    RCA shows:
    The address book Bind operation failed with status -2147467259. NSPI Status: 2147500037

    Thanks Hinte, Checked this after the AppPool recycle and after she worked, they are both set to False.   Would recycling an AppPool have been able to change this setting?  Or could there have been some kind of Throttling that triggered
    a "true" here?
    That won't affect those values.  It is enabled by default, but I have seen users disable it for various reasons on older versions of Exchange (2010/2007).
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

    I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
    gave same error. I browsed msdn blog. But nothing help me out.
    Below is the error log details--
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2061893606
      Start time:                    2013-10-21 12:58:05
      End time:                      2013-10-21 13:52:30
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for RS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for DQ:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for FullText:        Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  CROY-TOSH
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
      Installation edition:          Developer
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLSERVERAGENT
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
      ASCOLLATION:                   Latin1_General_CI_AI
      ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
      ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
      ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  NT Service\MSSQLServerOLAPService
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            CRoy-TOSH\CRoy
      ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   ROY
      CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
      CLTSTARTUPTYPE:                Manual
      CLTSVCACCOUNT:                 NT Service\SQL Server Distributed Replay Client
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               Manual
      CTLRSVCACCOUNT:                NT Service\SQL Server Distributed Replay Controller
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     CRoy-TOSH\CRoy
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                true
      FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
      FILESTREAMLEVEL:               2
      FILESTREAMSHARENAME:           MSSQLSERVER
      FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  false
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT Service\MsDtsServer110
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              SharePointFilesOnlyMode
      RSSVCACCOUNT:                  NT Service\ReportServer
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  Latin1_General_CI_AI
      SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           CRoy-TOSH\CRoy
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    0
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Complete
      Status:                        Passed
      Feature:                       Client Tools Connectivity
      Status:                        Passed
      Feature:                       Client Tools SDK
      Status:                        Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Passed
      Feature:                       Management Tools - Basic
      Status:                        Passed
      Feature:                       SQL Server Data Tools
      Status:                        Passed
      Feature:                       Reporting Services - Native
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Data Quality Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x851A001A
      Error description:             Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
      Feature:                       Master Data Services
      Status:                        Passed
      Feature:                       Distributed Replay Client
      Status:                        Passed
      Feature:                       Distributed Replay Controller
      Status:                        Passed
      Feature:                       Integration Services
      Status:                        Passed
      Feature:                       Data Quality Client
      Status:                        Passed
      Feature:                       Analysis Services
      Status:                        Passed
      Feature:                       Reporting Services - SharePoint
      Status:                        Passed
      Feature:                       Reporting Services Add-in for SharePoint Products
      Status:                        Passed
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       Documentation Components
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

    Hi,
    This 3rd time I followed this link. But nothing new, same error.
    Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
    Server Configuration Manager(Local) 
    From here I folllowed the steps ---[I cannt insert link/image :-(]
    SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed" 
    If I right clicked on SQL Server Service, there is no option to change the account. 
    Hello,
    Thanks for your patience,did you tried stesp mentioned in below article
    http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
    To resolve it, follow these steps:-
    When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
    been created. Check the Services console.
    If the service is present, perform the following steps:-
    1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
    it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
    Use this link to change sql server service account
    http://technet.microsoft.com/en-us/library/ms345578.aspx
    2. Next, try to start the service. It should come online.
    3. However, you will not be able to log in to the SQL Server
    4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
    5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
    6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
    Also add the builtin/administrators to the sysadmin role
    7. Now stop the service from the command prompt and start it from SQL Server configuration manager
    You should be able to log in to the server now.
    Hope this helps someone.
    Please revert if it helps or even if it does not
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again.  The server returned the error: Mail was unable to log in

    I can send but cannot recieve email
    This is the messege I am gewtting:
    There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
    The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
    The server returned the error: Service temporarily unavailable

    Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

  • Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

    I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
    1. Login to the ColdFusion Administrator
    2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
    3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
    4. Restart ColdFusion Application Server
    Notes:
    a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
    b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
    c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it."  However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition).  Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
    It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
    Attached is an image of the error.
    Just posting all of this as an FYI, in case it helps anyone.
    Thanks!,
    -Aaron Neff
    (OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
    I'll try to describe the error message window:
    - It is 494x452 pixels
    - Title of the window is "Error occurred while launching the Debugger"
    - Body content of the window is as follows:
    Unable to connect to the RDS server 'ServerNameHere'
    Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
    Error Message:
    -1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
    Root cause ->
    Connect refused: connect

    hi,
    I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
    Diagnostic report shows failed on the connectivity part
    Connectivity
    mx-direct Failed
    0:00:00.719 Connecting to web331.oracle.com:1025
    0:00:00.922 Name resolved to 148.87.108.234
    0:00:21.906 connect() failed (0x8007274C)
    0:00:21.906 Connection failed (0x8007274C)
    Pl help me to fix the problem.
    Regards
    Gobind Ahuja

  • How to ensure OC4J runs after user logs out of a W2003 Server

    Greetings,
    I have a question. We have BI Publisher running on a W2003 server. When I log into the server, a dos window starts up, and runs the OC4J stuff. When I log out of the server, this process stops.
    In order to use the scheduling part of BI Publisher (meaning, reports can be emailed out), the OC4J window must be running (meaning, I cannot log out of the W2003 server).
    How do I ensure the OC4J process remains running after I log out of the W2003 server? Note - this was fresh server, with a clean OBISE (Oracle Business Intelligence Standard Edition) install.
    Thanks,
    Colin Jensen

    Use the services created at installation time to startup Oracle AS components.
    thant should do the trick

  • JMX Connectivity has been discontinued with the managed server

    Dear all,
    I am getting following msg in my weblogic 11g manage server and admin server.
    Namage Server Log
    ####<Nov 22, 2010 2:15:39 PM IST> <Warning> <Log Management> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290415539687> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    Admin Server Log
    ####<Nov 22, 2010 2:13:35 PM IST> <Info> <JMX> <NewTradeServer> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290415415015> <BEA-149507> <JMX Connectivity has been discontinued with the managed server NewTradeServer.>
    ####<Nov 22, 2010 2:13:35 PM IST> <Info> <Server> <NewTradeServer> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290415415015> <BEA-002634> <The server "NewTradeServer" disconnected from this server.>
    ####<Nov 22, 2010 2:51:32 PM IST> <Info> <Server> <NewTradeServer> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417692374> <BEA-002635> <The server "NewTradeServer" connected to this server.>
    During this time my admin server in running, i can able to loggin to admin server console,
    Problem which i am faceing is that, i am not able to see the server status of that particular
    manage server, i am not able to see the any sub tabs statistic in Monitoring TAB of manage server, and after 1/2 and hours the manage server stop responding, then i restart the manage server and after that every thing work fine..
    any one have the solution for this error????///
    Regds
    Amar Shaw

    Kindly fing the log for the server problem time.
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.177.97.179:21,557 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 117.206.128.110:1,069 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 203.123.173.169:50,920 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.180.84.228:50,902 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 120.61.132.164:1,297 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.166.48.41:21,631 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 125.22.34.38:39,481 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 113.193.25.104:52,294 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.122:18,934 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 115.241.80.244:24,575 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 196.15.16.20:38,791 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 202.65.136.252:4,055 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 80.239.242.168:46,777 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 110.227.109.138:64,362 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.93.223.187:1,046 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 114.30.77.228:50,110 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.164.238.6:1,935 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 192.20.251.68:41,430 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 195.189.142.85:51,932 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 180.150.250.17:3,974 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 82.178.3.115:11,545 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 125.21.153.192:7,902 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.177.2.33:50,437 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 117.201.90.244:5,725 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 220.227.95.145:17,067 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 115.248.137.70:33,786 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.121:6,260 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.93.55.98:6,387 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.162.145.253:1,603 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 80.239.242.168:46,443 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 120.61.132.164:1,298 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 121.243.135.163:2,342 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.202.130.167:1,451 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 204.194.141.28:15,387 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 180.215.198.169:2,108 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 180.150.250.17:40,204 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.93.168.80:1,044 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.241.82.55:50,090 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.93.134.134:1,079 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.162.69.77:4,185 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 155.56.68.217:60,708 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 121.245.188.43:1,262 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 125.17.188.19:45,490 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.165.58.249:49,239 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 61.17.215.126:4,085 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 124.125.27.11:2,992 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.121:7,639 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 61.246.47.199:2,426 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.169.70.18:14,392 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.144.98.242:42,408 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.197.237.98:51,852 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.163.89.69:64,984 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 192.20.246.168:13,547 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.144.98.242:37,198 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.144.98.242:39,842 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.202.130.167:1,450 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.90.72.203:3,972 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 155.56.68.217:58,671 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.93.168.80:1,043 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.163.163.25:1,957 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 115.240.50.203:1,059 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 203.197.42.2:34,187 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 203.124.135.246:21,650 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 93.186.23.240:11,235 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.133:4,215 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.161.99.67:20,466 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <WebLogicServer> <NewTradeServer> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1290417576578> <BEA-000000> <WebLogic Server "NewTradeServer" version:
    WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Notice> <Log Management> <NewTradeServer> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1290417576703> <BEA-170019> <The server log file D:\BEA11G\user_projects\domains\IndiabullsWLS\servers\NewTradeServer\logs\NewTrade_%yyyy%_%MM%_%dd%_%hh%_%mm%.log is opened. All server side log events will be written to this file.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Log Management> <NewTradeServer> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1290417576718> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Diagnostics> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576812> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "http" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "https" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <RJVM> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576937> <BEA-000570> <Network Configuration for Channel "NewTradeServer"
    Listen Address          172.17.1.134:80
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <RJVM> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576937> <BEA-000570> <Network Configuration for Channel "NewTradeServer"
    Listen Address          172.17.1.134:443 (SSL)
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576968> <BEA-002609> <Channel Service initialized.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576999> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
    >
    ####<Nov 22, 2010 2:49:37 PM IST> <Info> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417577078> <BEA-000436> <Allocating 4 reader threads.>
    ####<Nov 22, 2010 2:49:37 PM IST> <Info> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417577078> <BEA-000446> <Native IO Enabled.>
    ####<Nov 22, 2010 2:49:37 PM IST> <Info> <IIOP> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417577281> <BEA-002014> <IIOP subsystem enabled.>
    ####<Nov 22, 2010 2:49:38 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417578718> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Nov 22, 2010 2:49:38 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417578796> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_KNcrxQIcWPsGUMqWWNL3mWV+Tkc=>
    ####<Nov 22, 2010 2:49:39 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417579203> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Nov 22, 2010 2:49:39 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417579390> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
    ####<Nov 22, 2010 2:49:39 PM IST> <Info> <Securit

Maybe you are looking for

  • ITunes doesn't recognize my iPod but my laptop does

    I'm having a problem with my ipod touch and I can't seem to find anyone with the same problem. About a month ago, I updated itunes after not updating it for a couple months. The same day I was cleaning my computer, so I was unninstalling some program

  • Connecting php with oracle9i database

    i tried to connect to oracle 9i database after creating dsn name as studentphp with username admin and passwd admin by using the following command and i got the following error. pls suggest me some solution $link=odbc_connect("studentphp","admin","ad

  • Script for changing individual folio colors

    Hi, I have a designer creating a 400+ page book where each page number is a different CMYK color based on the light spectrum (ROYGBIV). Is there a script out there that will apply a color to each page folio determined by a user's defined page range a

  • My printer will not print

    Hi,  I am wondering if anyone can help me with this problem as i am no good at printers. I have gone to print something of only for my printer to say it is offline- I have turned it on for my printers little '!' to start flashing orange, It has paper

  • CU Tcodes name missing in the tree view

    I have activated the Compatible Unit enhancement. However in the tcodes tree view, only tcodes are displayed. Name of the trasaction is not displayed.