Logging the information from multiple tables to a txt file

To All,
I am working in a bench test set in which I test different devices via serial. For each of them, I have a log table. Is there a way I could log all those tables in a singe text file?
Thank you,
Cosmica
Solved!
Go to Solution.

Hey cosmica,
Yea as Smercurio said, you can use the file I/O VIs to do your task. The advantage of the write to spreadsheet file VIis that you can set the delimiter (the character that separates data points in the same row) as a tab. This means that even if you don't open the file with a spreadsheet program like excel then notepad could still be used to open your file. Regardless of the extention that you choose to save your spreadsheet as, Excel can import it. You just select which delimiter you chose when you created the file (I recommended tab).
Please let us know how this worked out for you.
Message Edited by rex1030 on 05-14-2009 02:28 PM
[will work for kudos]

Similar Messages

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

Trans DP91 - where is it pulling the information from...tables etc.

Hi guys,
I need to find out where the information from transaction DP91 is coming from.
What I am looking for is Unbilled Costs and Revenues figures before they become a sales Order in this transaction but I cannot find the tables that will give me this information.
I realise it might take an ABAP person to debug the transaction to find the source but just thought id put it out there.
any advice welcome.
Thanks
Edited by: RealFlash on Nov 12, 2008 12:38 AM

Open a regular Finder window (not a search results window). Under View you can Show or Hide the "Path Bar." Once you have it showing the Path Bar, then your search windows will also show it.

Is it possible to get the information from the complete forms send to different email account

When i have a paid account is it than possible to get the information from the different forms send to seperate emailaddresses.
Who dont have a account from formscentral but just need the information directly in there own inboxes?
Because we're looking for a good and simple way to make qoustion & complain forms. But these need to go to different people in the company.

You can have notifications sent to multiple email addresses, but each will need to have a FormsCentral account. They can be free accounts. What you do is create your form and set up the email addresses that you want the information to go to to be Co-authors or Contributors. The co-author/contributor accounts will then need to log into FormsCentral, go to the Options tab and check the email notifications checkbox.
I hope this helps.
-Jeff

Update On data from multiple Tables

How can i update data from multiple tables(Using a Join)
using a single update statement.

Hii
Suppose i have following tables
create table emp_mas(empno number primary key,name varchar2(30));
create table emp_grad(empno number primary key,grade varchar2(1));
SQL> select * from emp_grad;
EMPNO G
100 A
101 A
102 B
SQL> select * from emp_mas;
EMPNO NAME
100 GREG
101 THOMAS
102 SAM
I would like to update information of employee 'GREG' Using a single update statement as
UPDATE (SELECT E.EMPNO,E.NAME,G.GRADE FROM EMP_MAS E,EMP_GRAD G WHERE E.EMPNO=G.EMPNO) J
SET J.NAME='GREG THOMAS',J.GRADE='B' WHERE EMPNO=100
Then i am getting Error message like this.
ERROR at line 2:
ORA-01776: cannot modify more than one base table through a join view
How can i achieve the result

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Adding Sum Totals from Multiple Tables in A single Document

Hello All,
I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
Any easy solutions? I can't find anything that's helped in my search efforts.
Thanks,
Josefis

Jerry,
Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
Thanks again,
Josefis

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

ALV for fields from multiple tables and make them editable

Hi,
I am working on a forecasting report. We have created few custom table e.g. store forcaset detail for whole year month wise. tables are say sales data, budget data, forcast data etc.
Now i need to make a report based on monthwise based on above mention table.
eg.o/p looks like:
column name                     type desc monthapr monthmay .......
table forcast                      Qty sales    100          150
table budget/sales             amt   amou    20.50    130.50
table sales vs forcast       amt   amount 3000     50000
-Now i don't know how to display data from multiple table in single ALV list that to with different field type.
-2nd issue is i need to make only perticuler row editable so that user can chage data.
-3rd when user change data and press calulate button - it should calculate data for future month - i got formula for that and disply the calulated data.
- 4th if user like the forcast data then when press save - change data should update dbtable.
Is this all possible with simple abap FM Or need to use ABAPOO.
I will appericiate all expert help.
Many thanks in advance.
KDE.
Edited by: kde_test on Jun 4, 2010 5:44 PM

Hi,
Solutions :
1. You can use FM REUSE_ALV_HIERSEQ_LIST_DISPLAY as guided by Ashutosh.
You can also check out this
[http://www.sap technical.com/Tutorials/ABAP/3DGraph/demo.htm] change link to saptechnical without space
2. [How to make certain rows in ALV grid editable...;
3 & 4. Use two importing paramaters 'PF_STATUS_SET' 'USER_COMMAND' of REUSE_ALV_GRID_DISPLAY.
create two function codes 'CALC and 'SAVE' in pf-status and provide your required functionality to these function codes using User-Command.
Sorry am unable to provide you with supporting code, but you can search for it and It can solve your problem
Regards,
Rohit

It's possible to make Hierarchical Tree from multiple tables ?

the famous example for Hierarchical Tree is about employee_id and manager_id field in employees table ............ so I was wondering it's possible to make[b] Hierarchical Tree from multiple tables ? and How ??
if the answer associate with example that will be so kind of you :D
and thanks in advance.

HI
use curose in when new form instance or procedure then u can got data more then one table like that
DECLARE
htree ITEM;
top_node FTREE.NODE;
new_node FTREE.NODE ;
child_node ftree.node ;
item_value VARCHAR2(30);
cursor prime_cur is select main_desc mgr_name, main_code dept
from pur_item_group_mst;
cursor child_cur(v_dept number) is select sub_desc,sub_code
from pur_item_group_dtl where main_code = v_dept ;
BEGIN
htree := Find_Item('tmp.tree4');
for dummy in prime_cur loop
new_node := Ftree.Add_Tree_Node(htree,
ftree.root_node,
Ftree.PARENT_OFFSET,
Ftree.LAST_CHILD,
Ftree.EXPANDED_NODE,
dummy.mgr_name,
'D:\ORYX_POLYBAGS\accept',
dummy.dept);
for child in child_cur(dummy.dept) loop
child_node := Ftree.Add_Tree_Node(htree,
new_node,
Ftree.PARENT_OFFSET,
Ftree.LAST_CHILD,
Ftree.EXPANDED_NODE,
child.sub_desc||' '||'('||child.sub_code||' '||')',
'D:\ORYX_POLYBAGS\next',
child.sub_code);
end loop;
end loop;
END;
Rizwan Shafiq
www.rizwanshafiq.blogspot.com

Sender JDBC Adapter : Fetch records from multiple tables

Hi Friends,
I am using sender JDBC adapter to select few records from DB2 database table.
This scenario is working fine.
Now my requirement is to fetch records from 3 tables. These table are independent to each other. There is no primary key or foreign key.
Please let me know how to write the sql in sender JDBC adapter to fetch records from these 3 tables.
Thanks,
Sandeep Maurya

hi sandeep...
if the tables are completely independent and do not share any primary / foreign key relation ship...
why dont u think towards creating a seperate interface for each of them..
or if u still want to select from multiple table at once..the best way would be to write a stored procedure on the sender side which do all the fetching n processing and pass the final resultset to PI
or u can think towards fetching the data from 1 table and then in UDF do lookup from other tables..which again is tricky and performace intensive

Delete records from multiple table

Hi,
I need to delete records from multiple tables using a single delete statement. Is it possible ? If so please let me know the procedure.
Kindly Help.
Thanks,
Alexander.

Hi Tim,
Syntax of DELETE statement does not allow for multiple tables to be specified in this way. Infact, none of the DMLs allow you to specify table names like this.
Technically, there are other ways of deleting from multiple tables with one statement.
1. "Use a trigger":
What was probably meant by this is that you have a driving-table on which you create a on-delete trigger. In this trigger, you write the logic for deleting from other tables that you want to delete from.
This does mean a one-time effort of writing the trigger. But the actual DML operation of deleting from all the tables would be simply triggered by a delete on driving-table.
2. Dynamic SQL:
Write a PL/SQL code to open a cursor with table-names from which you want the data to be deleted from. In the cursor-for loop, write a dynamic SQL using the table-name to delete from that table.
3. Using Foreign-Key constraint with Cascade-Delete:
This I feel is a more 'cleaner' way of doing this.
Having to delete data from multiple tables means that there is some kind of parent-child relationship between your tables. These relationships can be implemented in database using foreign-key constraints. While creating foreign-key constraint give the 'on delete cascade' clause to ensure that whenever data is deleted from parent-table, its dependent data is deleted from child-table.
Using foreign-key constraint you can create a heirarchy of parent-child relationships and still your DELETE would be simple as you would only have to delete from parent-table.
IMPORTANT: Implementing foreign-key constraints would also impact other DML operations that you should keep in mind.

Records from multiple tables

Hi,
I have a method that has to access records from multiple tables and store them all in a file. It's something like this:
switch (tableId){
case 'A' : query="SELECT * FROM TABLE_A
WHERE ID = '" + tempId + "'";
ResultSet rs = stmt.executeQuery (query);
rs.close();
break;
case 'B' : query="SELECT * FROM TABLE_B
WHERE ID = '" + tempId + "'";
rs = stmt.executeQuery (query);
rs.close();
break;
case 'C' : query="SELECT * FROM TABLE_C
WHERE ID = '" + tempId + "'";
rs = stmt.executeQuery (query);
rs.close();
break;
My problem is that I get an "Invalid cursor" error the second time I enter the loop. I've been reading up on cursors but I still don't know what to do. Can I use ResultSet to return multiple rows from multiple tables? If not, what can I use? Please help!
Thanks in advance.

remove the "rs.close()" from the switch statement. use "rs.close()" after your loop ends.
prem

Logging the information from multiple tables to a txt file

Similar Messages

Maybe you are looking for