Logging with log4j in a Web app that uses TopLink
The deployment engineer in my company is reporting problems with our first Web app that uses both log4j and TopLink. Apparently TopLink is failing to initialize correctly when log4j-1.2.8.jar is deployed to the WEB-INF/classes directory within the Web app.
I know that 9iAS's Enterprise Manager uses an older version of log4j and I wonder if TopLink uses an older version too.
Are there any known problems when using log4j 1.2.8 with TopLink 9.0.3?
Thanks,
Al Margheim
Unfortunately, when I asked the deployment engineer for more information on the problem, he couldn't provide any, and since he moved the log4j library out of the application's WEB-INF\classes directory he can't reproduce the problem (whatever it was).
Based on a variety of factors (including your response) I suspect that the people who encountered the problem misinterpreted the cause.
If I can get him to put the log4j library back in WEB-INF\classes and get more specific information about the problem, and it still looks like a conflict between TopLink and log4j, I'll post the errors here.
Thanks,
Al Margheim
Similar Messages
-
Can I cluster a web app that uses Spring and iBATIS?
I have a web app that uses Spring and iBATIS. It runs great on a single server. I am now trying to get it to run in a cluster. I went through the code and made all the classes serializable. Also, I added the distributable tag to the web.xml. I then deployed it to two clustered app servers.
When I logon and use the web app, everything goes well. Then, as a test, I determine which app server is being used and stop the web app on it. As I try to continue my session, the following exceptions are generated from the other node:
java.lang.IllegalArgumentException: No SqlMapClient specified.
The exception is being thrown from the Spring code. Is there something else I need to do to get Spring and iBatis to work in a clustered environment.
Also, I see a lot of references to Terracotta as a clustering solution. Will Terracotta work with Oracle App Server?Thanks for the response.
I think my session information is being shared. I've configured the default application in my OC4J configured for peer-to-peer clustering. Before I did this, if I shut down the instance I was using, it would fail-over to the other application server but my session would be gone and I would be forced to logon again. But once I was logged on, everything ran smoothly. -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
Want to Generate custom logs with Log4J within Java Embedding activity
Hi Gurus,
i want to Generate custom logs with Log4J within Java Embedding activity. For that i have performed some steps, but the log file has not been created.
ServerSide Configuration:
*===============*
1. I have copied the log4j-1.2.15.jar file to the "oracle.soa.ext_11.1.1" location and recreate the oracle.soa.ext.jar file using an-script, which appends the log4j.jar file to the classpath.( That was created successfully)
2. Specify a File location in log4j.xml for creating the log file. (e.g. (<middleware_home>/config/customLog.log)
3. Then create a folder and add log4j.xml and log4j.dtd file under the folder.
4. Modify the startManagedWeblogicServer by adding JAVA_OPTIONS="-Dlog4j.configuration=<middleware_home>/config/log4j.debug.xml”
5. Then restart the SOA server.
log4j.xml :
I have used fileAppender.
DevelopmentSide Configuration:
*===================*
1. Create synchronous BPEL process and Add "JAVA Embedding Activity" inbetween receiveInput and replyOutput activity.
2.Import the log4j-1.2.15.jar to the project libs
3.In the BPEL source code, import the Logger class.
4.Insert the code in the JAVA Embedding Activity
Logger logger = Logger.getLogger("CustomLog");
logger.info("CustomeLog " + getTitle());
Compile and deploy the project into the SOA_server and test it. Test status is completed but log is not created in the mentioned location.
Ref: http://blog.andrade.inf.br/search/label/Log4j
Is there any other way to achieve this requirement. Please suggest.
Thanks in Advance,
SharmisthaYou can try this.
http://veejai24.blogspot.co.uk/2008/04/simple-way-to-implement-log4j-in-your.html
Thanks,
Vijay -
Can you create a Adobe DPS app that use Web Services
I'm looking to create a DPS app that uses web services to pass data to and from a web server when the user has an internet connection, but when the user is offline stores data locally until an internet connection is established and then passes the locally stored data to the web server. Is this possible with DPS/
It's challenging but it's possible. Hint: local storage.
-
Problem running Web Service that uses OracleXMLSave on Oracle AS 10.1.3
I am trying to deploy a Web Service that uses OracleXMLSave. The service was built in Jdeveloper 10.1.3 and is deployed to 10gR3 AS. I have all the utitlites available from the 10g Production XML Developers Kit installed . The code compiles and generates correctly . I then deploy to an EAR file that inlcudes the applicaiton code and also all the XDK libraries . No problems so far. But when I run the app, I get an exception like the one below. It says it can't find XMLType . The funny thing is that this library (xdb.jar) and all other related libraries are there in the EAR file . In fact the class loader seems to see it because the exception says that it is there (see text below).
I have added all the libraries from XML Developer kit like xdb.jar , xsu12.jar , etc. I have also verfieid that the files are selected in the WebServices.deploy file and also present in the EAR file . (See full list below the eror message below. ).
It looks like for some reason the class loader can't load the class even though it seems to know that the class exists in the path.
Been sweating on this for a while (probably staring it at too long :) and would really appreciate some help.
This is the exception thrown when the OracleXMLSave Class is called for the first time.
Missing class: oracle.xdb.XMLType
Dependent class: myXML.DbXMLSave
Loader: TEAMWEBSERV.web.WebServices:0.0.0
Code-Source: /D:/OracleAS10gR3/j2ee/TEAMWEBSERV/applications/TEAMWEBSERV/WebServices/WEB-INF/classes/
Configuration: WEB-INF/classes/ in D:\OracleAS10gR3\j2ee\TEAMWEBSERV\applications\TEAMWEBSERV\WebServices\WEB-INF\classes
The missing class is available from the following locations:
1. Code-Source: /D:/OracleAS10gR3/j2ee/TEAMWEBSERV/applications/TEAMWEBSERV/WebServices/WEB-INF/lib/xdb.jar (from WEB-INF/lib/ directory in D:\OracleAS10gR3\j2ee\TEAMWEBSERV\applications\TEAMWEBSERV\WebServices\WEB-INF\lib)
This code-source is available in loader TEAMWEBSERV.web.WebServices:0.0.0.
2. Code-Source: /D:/OracleAS10gR3/j2ee/TEAMWEBSERV/applications/TEAMWEBSERV/WebServices/WEB-INF/classes/ (from WEB-INF/classes/ in D:\OracleAS10gR3\j2ee\TEAMWEBSERV\applications\TEAMWEBSERV\WebServices\WEB-INF\classes)
This code-source is available in loader TEAMWEBSERV.web.WebServices:0.0.0.
[oracle.classloader.util.AnnotatedNoClassDefFoundError]
List of libraries :
<list n="exportedReferences">
<hash>
<value n="id" v="Dms.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Log4j-1.2.9.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Mail.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="NetComponents.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oc4j.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ocrs12.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdbc14dms.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdl.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oraclexsql.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Orai18n.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="ADF Model Runtime"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="ADF Model Generic Runtime"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle XQuery"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle XML Parser v2"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle JDBC"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle SOAP"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Dms.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Log4j-1.2.9.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Mail.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="NetComponents.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oc4j.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ocrs12.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdbc14dms.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdl.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oraclexsql.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Orai18n.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xdb.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xml.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlmesg.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlparserv2.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xschema.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xsu12.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Classgen.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Jdev-rt.zip"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oraclexsql.jar2"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Transx.zip"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xdb.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xml.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlcomp.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlcomp2.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmldemo.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlmesg.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlparserv2.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xschema.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xsqlserializers.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xsu12.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Orai18n.jar2"/>
<value n="isJDK" v="false"/>
</hash>
</list>Well I got the EJB lookup working but only when I changed the Provider Url to the pre-10.1.3 format e.g. ormi://someserver:12421/someapp and used jazn.com/oc4jadmin as the username. After reading the online documentation, I didn't think this should work!
Another issue I am having is casting a datasource returned from a JNDI lookup for a datasource. We used to do the lookup in the code and cast to an OracleDataSource. Now it is throwing a class cast exception to ManagedDataSource. Is there a quick and easy solution to this? I really don't want to have to go into the code and change this cast so it'd be great if we can get this working without changing code. This code has been working in a prod environment for two years now on 9.0.3 -> 9.0.4... -
[svn:bz-trunk] 16315: Add remoting example to the team app that uses HTTP/ AMFX channel.
Revision: 16315
Revision: 16315
Author: [email protected]
Date: 2010-05-25 11:46:14 -0700 (Tue, 25 May 2010)
Log Message:
Add remoting example to the team app that uses HTTP/AMFX channel.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/remoting-config.xml
Added Paths:
blazeds/trunk/apps/team/features/remoting/remoting_AMFX.mxmlSpryAccordion.css
You have an error that is killing the rest of your code shown below in red. Remove it.
.AccordionPanelContent {
margin: 0px;
padding: 2px; /**suggest using 12px or more**/
background-image: url(../infobkgd.png);
background-attachment: fixed;
background-repeat: repeat;
font-family: Verdana, Geneva, sans-serif;
font-size: 12px; /**suggest using 16px or more**/
color: #FFF;
overflow: hidden;
height: 40
[x;
height: 100%;
Nancy O. -
My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???
If you open the Maps app where does that say you are located?
For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
You can confirm that by going to well-know place with wifi like Starbucks or McDonalds -
Apps that use non-public APIs will be rejected
Hi guys
Just reading the iOS guidelines before I get too deep into making the native version of a web app.
I was wondering what:
Apps that use non-public APIs will be rejected
means when submitting an app made in AIR - does it mean you can't use your own custom classes?
CheersIf you mean custom AS3 classes, yes you can use those. What you can't do is create an ANE that calls into the private frameworks of iOS itself.
-
Calling a web service that uses DIME
Can ColdFusion interact with a web service that uses DIME? Has anyone worked with that?
Thanks.CF doesn't support DIME "natively", but Apache Axis does, and that's the library that CF uses. So, you'll have to drop to Java to do this.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/ -
Hiss noise from iPad2 speakers when launching an app that uses the speakers
A couple of months ago I bought an iPad2 Wi-Fi. It was working fine until yesterday that it started making a hiss noise every time an app that uses the speakers was launched, for example when the keyboard clicks sound is enabled it will make noise while typing (this is somehow annoying). Is this a known issue?
Is this a hardware defect or can it be fixed with a software upgrade?
Thanks.i have the same problem: ipad2 makes noise every time when plays sound (music, video, games, typing)
i'm sure that problem is hardware..
the noise exists only with speaker: if i connect headphones noise disappears -
Exception when trying to run an Web Application that uses a Web service
Hello All,
I get an exception when trying to run an Web Application that uses a Web service. The web application is a WebDynpro Application.(an application similar to the one "Using an Email Web Service in Web Dynpro" in the tutorial section of Web Dynpro but using a different web service)
The exception is
<b>Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.</b>
Could anyone give me an idea on what might be the problem ?
Regards,
Loveline.Hello,
Like you said it was the problem with url.
The webservice I used is actually running on the local machine (where the NetWeaver developer studio is installed); so in the url I had specified localhost. But I deployed the application on another server(SAP J2EE Engine). That is why it didn't work. On changing the url as required, the application is working fine.
Thanks !
Regards,
Loveline. -
My iPhone 4s notified me that I had to manage my storage so I deleted apps that used a lot of space I deleted almost all my picture and it still keeps telling me I don't have enough storage is there any other way I can make room on my phone ? Were it shows how much storage I have available it still says 9.9 even after all that I have done so I don't know if I need to change my storage plan or what but anything will help I guess
Check for 'others' in iTunes against your iPhone.
Restore from a previous backup to reclaim some of it.
Still want more, Restore in iTunes, setup as New. -
3g drops every time i access an app that uses internet
I have a verizon iphone 4, every time i access e-mail, safari browser, twitter, pretty much any app that uses internet 3g seems to just cut out. It comes back pretty much as soon as i quit whatever app i try to use but i cant get anything requireing internet to work unless i connect to wifi, any help would be much appreciated.
sorry, I misunderstood your question somehow. I thought you were asking about the confirmation screen (not requiring a password) that you get when you first run an application that you got off internet.
You can't get rid of the password prompts when you install things that require system changes. and that's a very good thing IMO. But you should be able to install most apps without a password if you are using an admin account. only apps that use installers and change some system files require passwords. apps installed by a drag and drop into /Applications don't.
Message was edited by: V.K. -
just upgraded to ios5 on my ipad2. Some of the apps that use to be on the ipad no longer apperar there. They do appear in i tunes on my desktop computer. How to I transferr them back to my ipad2.
IOS5 upgrade wipes your iPad disk. When you re-sync to your computer, you should get all of the apps that are checked under the Apps page in iTunes.
Maybe you are looking for
-
JNLP - Swing application compiled in jdk1.5 not working in jdk1.6
I have one swing application, compiled in jdk 1.5 and deployed in JNLP with jdk 1.5. When client machine try to access the application and having jre 1.5 then it works fine. but if client machine having jre 1.6 or version greater than 1.5 then applic
-
BED & Higher education cess are not appearing in J1IIN in export sales
Dear Experts, we have scenario, - 1000 & 2000 Plants are excisable - Excise group is same for 1000 & 2000 plant - Serial Group is different for 1000 & 2000 plant. we enter materials from 1000 & 2000 plant for creating a export sales order ( IN one e
-
Video and audio don't match for purchased movies in iTunes
I recently purchased several movies from the iTunes store, but when I play them in iTunes the video doesn't match the audio. If I pause the movie, it will sync for a short while, then will not match again. I've tried disabling the Direct 3D video a
-
after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7 Cont-8096688758
-
Servlet as a client to the web-service
Hi all, I am new to this field of developing web services. I have designed a simple web service, that provides some lookup and search operation. I have developed the web service using JWSDP 1.5.0, Tomcat 5.0 and jdk1.5.0_03. I have also developed cli