Logic 10.1.1 exporting audio to movie...

There are two boring troubles:
1. Sometimes after exporting audio to a piece of movie (using locators) I hear my sounds but I see only a white screen!!!!
2. Sometimes after trying to make a short piece from the whole movie (using locators) I got the whole movie in (instead of a short piece) and my sounds start from time-code 00:00:00...
What am I supposed to do with those???
Thank you!

I have the exact same issue. I'm running Mavericks. My friend that has Mountain Lion has no issues.
Although I thought all it was doing was cutting off 4 frames in the front. But it sounds like you're saying it shifts the whole track by 4 frames, which is even worse!
Apple, fix this, please!

Similar Messages

  • Export Audio to Movie - where is that function in Logic 9?

    I have noticed that a very useful function in my Logic Pro 8 (version 8.0.2) options/movie/export audio to movie is not found in the Logic 9 version. One of my friends has this version (and an Intel Mac) but I cannot help him working with music and video - I cannot find it anywhere in the Logic 9 menus. Can you help?
    Best, Peter Danstrup

    I just opened a quicktime movie. Added an audio track, and am looking for the option indicated in the manual: "Choose File > Export Audio to Movie". Upstream it's indicated that this option only appears if a movie is present. My movie is present, but still this option does not appear?
    Ideas?
    -- Gerry

  • Logic 9 "Export Audio to Movie" command

    What happened to the "Export Audio to Movie" command that used to be under the file menu? This is something I sorely need back.Trying to import audio into Motion 5 is not working out well - even with rendering set at the lowest settings (same with FCP10). I like to be able to see my results as I'm working, not watch choppy playback and guess where to drop in the audio. I'm running an 8 core Mac Pro with 32 G of RAM and I'm wondering if anyone has used a good work around for this problem. I wish I never updated.

    I just used Quicktime Player to open the movie and dragged a bounced down version of my Logic audio on top of it. I "Saved As" and it worked fine!

  • Logic Pro X - 64-bit Export Audio to movie

    Does any one know if the " Export Audio to Movie " function has been fixed for the new 64-bit only Logic Pro X?
    In Logic Pro 9 you could only do this if you ran the program in 32-bit mode and I am concerened as to whether this has been addressed or not before I upgrade.

    hey over there,
    i have still problems to export an movie, including my audio tracks i made for the drumvideo! here i load up a .png, showing the "logic conservation" while trying to "export audio to movie" ... i tried both: 32bit and 64 bit
    what i did:
    i made a drum video while recording 6 audio tracks in logic, importet the video, made it synchrone to my audio and loops, put a little mix on it and tried to use the function: audio into movie export (chapter 24 in the manuel)
    but here, im missing the "advanced" functions in ther:
    thx for any help !

  • Logic pro x export audio to movie

    Hi!
    I'm running into problems when exporting a quicktime movie from Logic Pro X with a cue. The weird thing is, on my computer, the exported video plays back properly (outside of logic) with the music, and everything is fine and well – but when I send that file to the director, there is no music in it!! On her computer it only has the films SFX track. I saw other threads about trouble actually getting the audio to export, but I think I'm doing that fine.
    Here's what I've been doing:
    Bounce all music together with the film's audio track, so that ALL the audio is on one track.
    Click export audio to movie, select the track.
    Am I missing something? This is super weird.
    I'm using Logic Pro X, on Yosemite 10.10.1
    Thanks in advance!
    Mike

    First of all, did you listen back to the QUickTIme file after the bounce? Are you saying that you hear you score and when the director plays "the same" quicklime file" she hears only the SFX? That would be strange, unless she opened the quicktime file and messed around in the properties window.
    About the Movie export. You don't have to bounce your music fist. Whatever your state is at the moment in your Project that is what you "Export to video". There is only one  (often overlooked) step. After you click ok in the Save Dialog, there is one extra "Choose tracks to export" window coming up (see screenshot). It shows you the audio track(s) that are embedded in the original quicktime file. LPX 10.1 now has a new checkbook to make it clear:
    Check: You include the original audio track with your mix
    Unchecked: You don't include the embedded audio track and only your  Logic mix will end up to be the new audio track of the new quicktime file.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Logic bounces unwanted audio when exporting audio to movie

    Hey all,
    So as the title says, Logic seems to be bouncing a few tracks that i've now completely deleted from the Logic project. I even removed them from the bin.
    Every time I try to export audio to movie these audio tracks come up in the exported .mov. I have no clue why this is happening. Any thoughts?

    Hi
    Are these audio tracks that were/are embedded in the movie?
    When bouncing to a (new) movie, these audio tracks are automatically included unless you opt out (de-select them).
    CCT

  • "Export audio to movie" produces an all-white video or other problematic issue.  Help.

    The latest Logic X update seems to have broken the "export audio to movie" function.  I need to re-import the movie file every time I want to export audio to movie or it results in an all-white video or a video that hangs up on a single frame.  Does anyone know a good work-around or fix?  I'm generally using video that is compressed in H264.  I also need to deliver at that same codec.  Not having to convert the original movie to a new format and then convert the version with music back to H264 again would be ideal.

    Now Logic's gone racist, jeeze... what next?
    Dang Clancy..... Now I have spilt coffee all over the floor!

  • Export Audio To Movies issue

    Hi folks,
    In Logic X, I can't seem to export audio to movie properly.  When I click the "Export To Movie" it seems to export a short section from wherever the cursor is, so I tried moving the cursor to the start and no difference.
    So, I then used the cycle area to select and export the whole track, which it did - but without the video!  When I play back it's just darkness!
    I had no such problems in Logic 9 - am I going mad or has anyone got any solutions?
    Thanks!
    Ben

    Well the temporary workaround I found right now is to use the sample delay plug-in on the output 1-2 channel. Actually needs 2 instances. The mas setting is around 10000 samples. I think in my situation, the video is around 8 frames late. So I set th combination of plugs to delay the audio by around 12800 samples. Upon exporting, the sync between audio and video is close enough.
    This is just a workaround. I hope apple fix it for the sake of users using Logic for score to picture purposes.

  • Logic8 will not let me Export Audio to Movie

    So...I have had another weird one.
    Normally (in LP7) when I am working with a movie file that has audio attached to it and I want to Export Audio to Movie, Logic brings up a screen before it bounces which shows me what audio is currently attached to the movie and gives me the option to exclude or include that audio in the bounce. Since going 8 that window does not show up. Ever. Logic mixes what I want to bounce with what is already on the movie.
    Anyone else having this problem?

    I've solved my problem!
    First I tried to export audio to a "Apple Motion JPEG A, 768 x 576, 16,7 Mill." Movie - that doesn't work! After converting the reels to "H.264 Decoder, 720 x 480 (853 x 480), 16,7 Mill." - exporting works as before :o))
    Try it...

  • How do I export audio to movie without original music

    When I export audio to movie and I open the new quicktime file there is music I didn't write as well as my own music. In the manual, after I choose the desired format options for the bounced audio file, and I enter a name and target folder for the movie a dialog is supposed to appear allowing me to choose which of the original audio tracks should be included in the new movie. That dialog box doesn't appear on my computer.

    Try this.
    Bounce out your music from logic.
    Import Quicktime movie into the old i-movie (haven't tried the new one yet.) from here, you can extract the original audio.
    Import your new music into i-movie, and lay it against the picture.
    Export your new movie.

  • Can't export audio to movie

    Hi
    I am trying to add music to some video footage taken with a digital camera. I was unable to extract the audio from the footage onto my arrange window using import audio from movie. I received a message saying "no active extrac
    table audio to be found" (though there is audio in the footage). Then when I exported audio to movie I found that the movie was unchanged, the soundtrack I had created did not play and the original audio remained as well.
    Any help would be appreciated.

    H,thanks for the advice, I'll try it out tonight. Yeah I bought quick time pro especially to work with film in logic. I am soon to start working on a project with a film student friend of mine. I was literally tearing my hair out for two days figuring I had done something wrong and it turns out that this problem seems to be part of an apple conspiracy to hush up this flaw. That and the fact apple seem barely contactable when there is an issue with one of their problems only adds to the frustration. I expected more I have to say.

  • HELP! : No "Export Audio To Movie" option

    Hi
    I've just finished a sync project and need to 'export' to movie. When I go to the file menu or right click on the movie track, the "Export Audio to Movie" function is not there.
    PLEASE can anybody help. I have to deliver the pitch tonight. I'm running 9.1.3 64bit.
    Many thanks
    Jules

    Mike is right. The reason why Logic9 doesn't have the Export Audio To Movie feature is the current state of Quicktime. Remember that the basic video capabilities of Logic are not written into the Logic code but outsourced to the Quicktime components in OSX (Don't invent the wheel twice). Based on a statement by Steve Jobs, the new Final Cut version should arrive in 2011 and you might think it will be 64bit, dragging QuickTime along with it, followed by a quick Logic update - maybe.
    If this helps, here is my current workaround:
    I work in 64bit with a separate project file for each music cue on a video based project. When I'm done, I bounce the audio.
    Now I have also one master project, that also uses the current video and has the exact (important) sync settings. I use that project to import each previously bounced audio cue. If your sync settings are the same with all the individual projects and the master projects then you can import one or many audio files and with one command "Move to original recording position" all the audio files line up perfectly in sync.
    _The advantages of that master project_:
    1) You run that project in 32bit mode and therefore are able to use "Export audio to movie"
    2) You can make rough mixes of your video (audio against dialog) for approvals or your own reference. Having these little videos with you at the dubbing stage can take prove very easy if the music editor messed up your cue.
    3) You can export videos of individual cues, sections or the whole video (at least reels, if the movie is broken down in separate reels)
    4) Easy handling/mixing of separate cues that overlap
    5) Quick comparison of different versions of a cue which of course are all imported into the master project6)- Quick timing references for Cue Sheet preperation
    7) In case of a picture edit, this the master project is also an amazing tool to figure out how messed up your music will be with the new picture cut. Im

  • When I export audio to movie the result is just very much noice. The problem started after installing Lion

    When I export audio to movie the result is just very much noice. The problem started after installing Lion
    I'm using latest version of Logic 9 in 32 bit

    Please - gotta bump this because I'm really desperate to get this working.
    Any help or ideas .....?

  • An old "export audio to movie" bug returns in 9.02?

    Hey
    Maybe it's just me, but I could've sworn they'd fixed this one...
    I remember for a while when you'd use the "export audio to movie" feature, the sound would sometimes be about half a second late. Then that was apparently fixed... But now it's back again in 9.02
    My previous work around was to bounce the audio mix, then drag it back into the timeline as a stereo .aif file. I'd solo that track, make sure PDC is set to "ALL" then use 'Export Audio to Movie'.
    And - before you ask - no, there were no latency inducing plugs on the master output bus. No limiters, gates, in fact no plugs at all on this particular project.
    No matter what I did, the Quicktime bounce was always out of sync. When I just 'play' the project, the 2-pop from my audio and the video cue beep/flash frame line up perfectly. Everything plays back fine. But when I use "Export Audio to Movie", my Logic soundtrack is about half a second late throughout.
    Anyone else notice this? Any suggested fixes?
    I know some people are having a great time with L9, but I'm sorry to say I'm solidly in the "sorry I upgraded" camp.
    I'm starting to appreciate L8 more every day...

    iSchwartz wrote:
    You can work around this problem in QT without having to deal with Logic at all, provided your film has a timecode burn. Open the movie in QT. Trim it down if necessary. Assuming your 2-pop is what your cue starts off with (with no dead audio before it), open your 2-mix in QT, select ALL, CMD-C copy. Now your mix is in the clipboard. Back to the movie window, set the playhead of the movie so that you're seeing the desired start frame. Use CMDOPTV to place the music into the movie. Trim the movie as needed. Export.
    If you want to save the movie, be sure to save it under a new name. Saving as a proxy (reference) will save disk space.
    Good tip - thanks. Unfortunately, this film doesn't have a time code burn. And while I've used the method above in the past, I always find it a little finicky to make exact trims in QT because you don't have the fine frame-by-frame control sometimes... I think.
    But the thing is, I exported audio to movies with perfect sync all summer long in L8. I did about 60 cues for one client this summer, all with quicktimes, and not a single problem.
    Now, since "upgrading" to 9, I can't get the audio to export with the same sync it has on playback no matter what I do. Sure seems like a bug to me....
    I'm going to try some more experiments today if I get time. I want to see if changing buffer sizes or PDC settings has any effect....
    Hm.

  • Export Audio to Movie

    Hi I'm using Logic 9 on a G5 IMac 10.7.4 2.5 GHZ Intel Core i5 Lion.
    I'm trying to Export  a new audio file that I've recorded to a movie file which is VTS_01_1.dv.  (replace the old audio). The old file is VTS_01_1.aif.
    That's fine I can do that but when I play the video I get both old and new audio files playing.
    I went into Video preferences in Logic and muted the soundtrack as well as turned down the volume, but didn't help.
    Can anyone off any advice on this.
    Thanks.
    Rob.

    Petra Sobotka wrote:
    I searched this forum and couldn't find anything that helped me so here I am posting.
    I am trying to export audio to movie. I have done this before but it has been a while so perhaps I am forgetting to do something. I bought a manual at macprovideo, but it only tells me what I already know, no solutions.
    When I export audio to movie, the audio does not get attached. I go to 'export audio to movie' click, I try t select sample rate, it is selected, but the window itself is blank. . . well let's try it anyway. . . I hit ok,
    I deselect the original audio because I already dragged and edited it in logic. I hit ok, it is done in a couple of seconds so I already know there will be no audio but I check just in case and indeed there is nothing.
    Am I leaving something important out?
    Please help I am driving myself crazy.
    Petra
    "I deselect the original audio because I already dragged and edited it in logic. "
    Try leaving the audio selected...
    Also, where are your selection markers? ie the length markers? These are on the top ruler, and are the left locator, and the right locator. they must select the length of audio to export too. In the Transport, they have bar indicators as to where they are.
    Cheers

Maybe you are looking for