Logic 10.1 won't give me the option to 'export all tracks as audio files'. Why is this?

I need to send an important session today but when i go to file>export>all tracks as audio files, the option doesn't appear. I searched the help bar and did my own research on the internet but i couldn't get any answers. Is anyone else experiencing this problem or knows another solution to export all tracks as audio files?

You aren't running in Garageband mode are you?  Do you have ALL of the Logic Preferences/Advanced  enabled?

Similar Messages

  • Why does Logic Pro 9 add 0.3s silence at start of all my tracks when I "export all tracks as audio files"?

    OK - when I "export all tracks as audio files" it works fine - I get a load of exported tracks (annoyingly with the stupid "_bip" prefix at the end).
    But I find that they all have about 0.3s silence inserted at the start. WHY??!!!
    I checked, and on the timeline all the tracks start with their first note at the beginning of the track so there is no silence in the arrangement. But still this silence on export.
    This Logic feature is so badly designed - why can't it do the simplest things as expected.

    rbdavis wrote:
    Thank you I will look into plug-in latency compensation. However, there is no latency or need for latency compensation when outputting offline files in this way. Latency compensation is for live playback where real-time processing matters. So this is flawed software design, hence my comments about it being illogical.
    "there is no latency or need for latency compensation when outputting offline files.....etc"
    You don't fully understand how Logic's audio engine and buffering scheme works... not that anyone fully does except the programmers. Basically your above statement is incorrect, as some plugins have built-in-latency and others don't, but that's not the complete picture. The problem is a combination of a plugin's built-in-latency and how Logic buffers data. Logic deactivates the audio engine when stopped, all plugins and software instruments become deactivated including the ability to load or purge data buffers with the exception of a software instrument or audio track that is selected for "live" input.
    (Look up Plug-in-Latency Compensation in the manual for a full explation of the choices available)
    I won't disagree with you about the software design, however, rather than flawed I tend to think of it as antiquated. The positive side of this is extremely low processor use and the ability to design templates with all plugins and software instruments loaded and ready to start a new project. The downside most Logic users are familiar with...  unexpected overloads in the middle of a project when a approaching a region that makes use of processor intensive plugins, Loops that don't match up perfectly when starting a project from bar 1 and/or missing notes at the beginning of MIDI loop if starting at bar 1.... plus a half dozen other anomalies related to Logic's "efficient" audio engine. The efficiency concept made sense back when computers didn't have enough power to handle active or semi-active plugins, seems it causes more problems than not these days.

  • How to export all tracks into audio files with the same duration

    Hi everybody.
    I am trying to export all the tracks into different audio files.
    It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
    Thanks!!
    Alessandro

    sambino wrote:
    I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
    each track is composed not only by played instruments but also by moments of silence.
    Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
    When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
    The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
    By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
    iSchwartz wrote:
    exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
    If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

  • I see how to delete songs from iPad, but there are some that won't give me the option to delete when I swipe it. Why won't it let me?

    I see how to delete songs from iPad, but there are some songs that don't give me the option to delete when I swipe them. Why can't I get rid of these songs?

    Do they have a cloud icon next to them? If they do, they aren't on the iPad so you can't delete them. They are in iCloud ready for you to download them if you want to and they are visible in the music app for this purpose.
    If you don't want to see these songs that are in iCloud, go to Settings> iTunes & App Store>Show all>Music>Off.

  • HT4623 I can't update my iPad. I have the 5.1.1 software but it won't give me the option to update to ios7. Any ideas why?

    How do I update to ios7 if my iPad isn't giving me the option?!?

    If it's a first generation iPad, it can't be updated past 5.1.1. Otherwise, check again when Apple's servers aren't as busy.
    (89566)

  • I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

    I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard. 

    Hi Clarkett99,
    To use an external hard drive for your iTunes library, see the steps in this article -
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    iPhoto can be used in a similar way, follow the steps in this previous discussion -
    how do I save photos and their albums...: Apple Support Communities
    https://discussions.apple.com/thread/3744259
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT201272 I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??

    I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
    If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT5312 For the security questions, it won't give me the option to change it. Like when I go to manage my account,it doesn't say  " send security code." What should I do?

    For the security questions, it won't give me the option to change it. Like when I go to manage my account,it doesn't say  " send security code." What should I do?

    The reset will only show if you had put a rescue email address on your account, if you aren't getting the link then you don't have one and you won't be able to add one until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

  • My ipad won't give me the option to upgrade from op system 5.1.1 to higher as the update option say's I'm up to date.

    My ipad won't give me the option to upgrade from op system 5.1.1 to higher as the update option say's I'm up to date.

    A first generation iPad can't be updated past 5.1.1.
    (119512)

  • I am trying to configure some new unsupervised iPod touch 4th generation using Apple Configurator but it won't give me the option to install the app that appears on the Apps tab.

    I am trying to configure some new unsupervised iPod touch 4th generation using Apple Configurator but it won't give me the option to install the app that appears on the Apps tab. I have tested the to see whether it works in supervised mode and it does but in Prepare mode it won't let me tick the box.
    Any ideas anyone?
    Many thanks
    Mario.

    The requirments say:
    Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPad 2 Wi-Fi + 3G, and iPad Wi-Fi + 4G.Requires iOS 5.0 or later.
    No mention of iPod touch
    http://itunes.apple.com/app/jack-boxer/id530122469?mt=8

  • TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
    According to Fly150 in another discussion, this is a workaround - for the time being.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • I'm having trouble importing pictures from the internet....when I drag the picture to the icon, it gives me the option to import all duplicates. Even when I click "NO", it STILL imports every picture I have imported AGAIN, including the new one! WHY??

    I'm having trouble importing pictures from the internet....when I drag the picture to the icon, it gives me the option to import all duplicates. Even when I click "NO", it STILL imports every picture I have imported AGAIN, including the new one! WHY??

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • When click the email icon on my iphone, it opens on one email only.  I can not go to the next or previous email, a different email or anything.  It only gives me the option to move that email!  How can I stop this.  Its been working perfectly well before!

    When click the email icon on my iphone, it opens on one email only.  I can not go to the next or previous email, a different email or anything.  It only gives me the option to move that email!  How can I stop this.  Its been working perfectly well before!

    Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
    Settings>General>Reset>Reset all Settings
    If that does not work try to re add the account
    Last but not least, restore as new.
    Hope that helps.

  • Can a one please help me turn off auto play for Facebook the option is no longer in my  General settings  why is this ?

    Can a one please help me turn off auto play for Facebook the option is no longer in my  General settings  why is this ?

    And yet the link you posted only tells you how to do it on the Facebook App for Android. Nothing about the Facebook page is mentioned at all, or how to do it on an iPhone.
    With that said, and assuming you have the most up to date version of the Facebook App, you can now turn the auto play feature Off within the Facebook App itself.  Tap on the "More" icon on the bottom right, then scroll down to Settings->Videos and Photos->Auto Play. If Smart auto-Play is on turn it off. Then you can set the check mark on "Never Play Videos Automatically" which is the same as Off.

  • Whenever I try to download a PDF to save for future use, it keeps opening up the text in my email and won't give me the option to download and save.  Any suggestions?

    whenever I try to save a PDF document on mu iPad, it will only open up as text in my email and won't give me an option to download and save.  Any suggestions?

    You can hold down on the open PDF and get the option to Open In -  in the resulting pop up window.

Maybe you are looking for