Logic 7.1.1 OMF/AAF import work around

Hi everyone
I may just have a proper workaround for all you poor audio types like myself, trying to do post sound in logic.
Firslty, let me say it helps if you have Protools (6.4 is fine) with digitranslator.
I've been trying to import a 94 minute feature film into logic since november last year, even spent christmas with my laptop trying to get any info I could to transfer to logic.....nothing, crashed every time.
Been checking up on this forum every few days, to see if there have been any breakthroughs....... seems apple doesn't want to take any responsibility yet!
So latest logic 7.1.1, OSX.3.9,G5 1.8dp,1.5 gb ram,all apple updates latest versions.
Anyway, here's how I achieved a full and working transfer of 21 audio tracks from Protools into Logic.
Exported music and fx tracks together from Protools = 6 tracks. selected AAF / 25fps/consolidate media.
Imported into logic no problem...SAVE
Exported Atmoses = 6 tracks. same as above AAF/25fps/consolidate.
Of course this time when I imported, all the automation fades got changed.
To get around this and apologies for all that may know this already,after first import, with cursor over the number 1 (far left)on track 1, pull entire track down to track 30 and the repeat for all remaining tracks, but obviously 29,28,27 etc, respectively.
Then reasign track number( cursor over track name/Audio 1 reasign to audio 30/move automation data, when window appears) and do this for the remaining tracks.
Then highlight track 30 and from view menu, hide current track.
Repeat for the remaining tracks and then lock these tracks.
Then you can import the next set of tracks, in my case it was the atmoses.
Then continue the export of tracks(AAF/25fps/consolidate etc) (I had to export all the dialogue as individual tracks as it was too much data for logic to handle)and import in the same way as I've just described, moving the set of tracks down to available tracks/reasigning/hiding original and locking.
It ain't perfect and it's a collosal pain in the backside, but it works, took me from 11am till 6pm.
I hope this all makes sense and helps some of you, maybe it's only going to work on some setups, but if you're desperate, give it a go.
Good luck

Thanks, but I have Tiger on a seperate partition and logic won't boot!
tried a new install several times but doesn't want to know.

Similar Messages

Audio editing across tracks after OMF/AAF import problems

Hi there,
I'm having difficulty getting my head around the way STP handles multiple-mono audio files.  I'm lucky enough in my job to have a choice of audio editing tools for what I'm working on.  For speech I use SADiE, for more complex projects involving automation I'll often use ProTools & for podcasting I find that STP is pretty good - especially for enhanced podcasts with pictures & web-links etc.
So now to my problem.  I've brought an OMF project, from ProTools, home to work on in STP. The import went smoothly, every thing in the right place & sounds ok.  However, all the stereo audio files are now split across 2 tracks; 1 track for the left leg another track for the right leg.   I can't now edit the stereo content in any easy form.  I've tried using the 'blade all' tool to cut across the 2 tracks, but I can't then delete & ripple the audio.  This leaves me with a gap that I have to manually close.  Needless to say, I'm finding this frustrating as it's making what should be a simple process un-neccessarily long-winded.
Both ProTools & SADiE allow me to group files like this so that they can be treated like a stereo file.  I've looked everywhere, but I can't see a function in STP that does the same.  Am I missing something obvious?  I can't be the only person who's had to deal with files like this can I?
The only workaround I've found is to use the export command to bounce the 2 tracks to a stereo file, however, this loses any existing edits so I can't unpick them if there are problems.
Any ideas anyone?  Can this be done or should I just stick to my other audio tools for this sort of thing?
Thanks

ProTools uses WAV, in fact it uses the Broadcast Wav standard. The problem is the way it handles files. It still splits stereo files into separate L & R files. It's just that it hides this from the user. When you drag a stereo file in from PT's region list (the equivalent of STP's bin) to the playlist, the two files appear as one as they should do. The downside is that OMF/AAF export still treats them as individual files.
My problem is that I was halfway through an edit when I tried to move it from one system to another. If the edit was complete & just needed mixing, then it would have been less of an issue.
But you're right, there's probably some tool on the net that will solve this issue
Cheers

Large Post House needs help. OMF -AAF NOT working in PP 8.1 beta or 8.0 Please anyone experiencing this same issue recently?

We are getting ready to start our dev into PP CC. We know that there are real issues trading audio with the audio post teams, working in Pro Tools. Since PP CC is new to us, I (the Audio Post Manager) is trying to get a handle on what the issues are and how the overall community is coping...advise anyone?
Video Software: PP CC 8.1 beta (and 8.0 public)
Audio: Pro Tools 11.2.1
All NLE's running on Mac Platform,
Video suites are currently running 10.6.8
Audio is running 10.8.5
Thanks,
Brucema12

We are getting ready to start our dev into PP CC. We know that there are real issues trading audio with the audio post teams, working in Pro Tools. Since PP CC is new to us, I (the Audio Post Manager) is trying to get a handle on what the issues are and how the overall community is coping...advise anyone?
Video Software: PP CC 8.1 beta (and 8.0 public)
Audio: Pro Tools 11.2.1
All NLE's running on Mac Platform,
Video suites are currently running 10.6.8
Audio is running 10.8.5
Thanks,
Brucema12

Problems with .aaf import in premiere pro cc

Hi,
So I'm having problems with importing an aaf file into premiere. The weird thing is it was working about a week and a bit ago, then stopped. I can't work out why, to my knowledge nothing has changed but if someone could point me in the right direction that would be massively appreciated.
I'm using premiere pro cc and avid media composer. I'm trying to export from avid and import into premiere. I'm creating an .aaf file in avid and trying to import into premiere. When I press import, the progress bar comes up and gets stuck instantly. I can close the aaf import window, but then it leaves the import files progress bar still up and premiere stops responding completely.
At first it worked fine, within premiere I can still use the aaf files already imported, I just can't import more (I can't even import the files I had previously done successfully). I just can't work out why?
Any help would be massively appreciated,
Thanks,
Jack

Hi Jack,
Please check the below Forum thread and roll back to the Initial version 7.0 of Premiere Pro CC. You can choose to update Premiere Pro CC to the desired version from the below links.
http://forums.adobe.com/message/5827476
Updates:
For MAC:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Macintosh
For Windows:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
Regards,
Vinay

Logical dataguard SQL apply fails during import on primary database

I have created logical dataguard using GRID, initially every things works fine.
One time we had to do import of new data on primary database, that is where the problem started.
log apply is lagging big time, and i got this error
StatusRedo apply services stopped due to failed transaction (1,33,8478)
ReasonORA-16227: DDL skipped due to missing object
Failed SQLDROP TABLE "USA"."SYS_IMPORT_SCHEMA_01" PURGE
This table exists on logical dataguard...
How do we deal with import on logical dataguard, since import generates a lot of redlogs

Hello;
These Oracle notes might help :
Slow Performance In Logical Standby Database Due To Lots Of Activity On Sys.Aud$ [ID 862173.1]
Oracle10g Data Guard SQL Apply Troubleshooting [ID 312434.1]
Developer and DBA Tips to Optimize SQL Apply [ID 603361.1]
Best Regards
mseberg

Easiest way of bringing audio files from pro tools to logic w/o using omf

I have a session recorded in pro tools that I am trying to get in logic so I can mix, since logic has way more plug-ins than pro tools but when I import the audio files they all start at 1. I need the files to show up where they were recorded at in pro tools. I tried putting these files in the audio bin first and bringing to the arraange but they still started at 1. Can I get logic to this? if not does anyone know a work around?

You need to consolidate the files in Pro Tools first, so they are all starting from the same point.
From within Pro Tools... select al the regions in Pro Tools, (make sure all tracks are selected) ,place the curser at the end of the song, hold down the shift key, and hit return. This will select the whole session, form bar 1, beat 1.
At this point, if there are tracks with many edits, I will first duplicate them (option/shift/3). These duplicated tracks are then pre-selected for you, and you can go ahead and consolidate them to a folder of your choosing by hitting command/shift/K.
Then open a new Logic song, and add these files to the audio bin. Place them on the arrange page, all starting from bar 1, beat 1, and they'll all play in perfect sync.
I do this frequently, btw, and it works 100% of the time, with absolutely no problems.

After Logic Board replacement Built in Display not working but External Monitor is

Had to replace logic board in my Mid 2009 17' MBP as it wasn't powering up at all.
Since putting in refurbished logic board MBP powers up and actually works perfectly with an external monitor but built in display is dead.
In 'About My Mac' initially it showed Color LCD as being connected., but now it doent.
Can anyone tell me if this is a problem of the refurbushed logic bioard from this ionfo - or if there is a w ay of being 100% sure that it is the logic board and not the display.
Best
Tommy Banana

Shine a bright light at the screen and see if the picture is there, but the backlight is not there.
Working inside MacBook is very fussy work, and it is far too easy to make connections that seem fine, but do not quite work, or to disturb earlier work during re-assembly. Just to vex you even more, the screen connections go through the hinge area, and are subject to constant movement and stress.
I tend to first blame the last thing you changed (working inside your Mac in this case) as the source of the problem over random failure, until I can use classic techniques (such as substituting know-good parts) to rule random failures in or out.
If you did not follow proper grounding and static-elimination techniques, you can cause major damage inside. Tiny shocks can ruin electronics long before you feel the spark.

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

Logical backup and recovery using export/import

Hi,
Anyone provide me the clear steps and command to take logical backup and recovery using the import and export method...??.
im using oracle 9i database and redhat linux server version 4.0.........???.
thanks,
vasanth.......

user12864080 wrote:
Hi,
Anyone provide me the clear steps and command to take logical backup and recovery using the import and export method...??.
im using oracle 9i database and redhat linux server version 4.0.........???.
thanks,
vasanth.......Vasant,
Though you have got links already for using the exp/imp , I would strongly suggest that when you mention backup/recovery, RMAN is the tool that you should be using. Exp/imp is/was never considered as a backup tool. You should read this paper to get the answer of "why rman" ?
http://www.evdbt.com/TD_Rman.pdf
Aman....

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

Problem in export/import work repo !!!

Hi All,
Good Morning.
I have a problem with exporting and importing repositories. The description of the problem is given below,
I have a remote machine in that sunopsis is installed and all the developments,implementations,testing are happening there.
Now i need to stimulate the same environment in my local desktop(ODI is installed and master,work repo is created).
When i export the work repo from my remote machine and trying to import it in my local machine (from designer level import->work repo) after a while its saying "snp_lschema does not exists" error.
Any one have idea why this is happening?
Thanks,
Guru

Hi Julien,
Thanks for your input. It really helpful for me.
I need some more clarifications,
Actually i exported my master and work repo from my remote machine (as a zip file) and saved it in my local drive (say D:/downloads/deploy.zip...)
So when i tried to import master repo from topology ( browsing the zip file and said OK) its not doing anything, i mean nothing happens after i said OK.
Should i have to copy this master repo zip in the Sunopsis installation folder (in IMPEXP directory) and then import it? Am i doing right?
Please advise.
Thanks,
Guru

Bundle export/import questions and work arounds

Hello,
I've begun to use bundles to migrate components from our test server to our production server. Bundles are a great feature which i missed the last time i worked with N1SPS a few years back. But i've found a few things that i had to work around.
1. It would be very nice to be able to set version to something like "latest" in the bundle, so i always get the latest version of all components when i do an export.
2. The bundle should be able to export in a certain order, first folder then components, then containers and lastly plans. Today i have to add everything to the bundle in this order or change the XML-file in the jar afterwards. A function to change the order in the bundle would also help.
3. Then the bundle is imported the container reefers to components of version 1.1 for some reason (in this case a directory), but it will import that component to version 1.0? I had to change the version reference in the XML to get this to work.
Any workaround or is it all RFE:s and bugfixes?
Regards
Henrik

Thank you for your fast reply. Is (1) something that could be object for a RFE? I think it's a common work flow to export the latest versions from a development server to a production server.
Regards
Henrik

Volume Logic 1.3.2 and Leopard work-around

I found a good work-around that got VL 1.3.2 working under Leopard.
I found the "fix" at Veerle's blog...
http://veerle.duoh.com/blog/comments/nomore_volume_logicupdate/
Here's the summary so that you don't have to jump to another site...
Quit iTunes
Download iWOW (updated for Leopard) Demo and install - http://www.srs-store.com/store-plugins/mall/iwow-plugin.asp
Quit iTunes or dont start iTunes....
Drag the iWOW plugin out of /Library/Audio/Plug-ins/HAL/ to the desktop
Ctrl Click iWOW plugin (show package contents)
Goto Contents/MacOS/ (you should see iTea.)
Ctrl Click VolumeLogic plugin (show package contents)
Goto Contents/MacOS/ (you should see iTea.)
Replace the iTea located in the Volume Logic plugin with the one from iWOW on the desktop.
This was all I needed to do, since I was able to activate VL without a problem. If you get an activation error from eSellerate, try the following...
Download the Latest eSR SDK - http://webvise.mindvision.com/pub/mac/eSellerateEmbeddedSDK.dmg
Mount the eSellerate Embedded SDK and look in the "eSellerate Libs" folder for "EWSMacCompress.tar.gz"
Go to /Library/Audio/Plug-ins/HAL/VolumeLogic.plugin
Ctrl click and choose "Show Package contents" and open the folder "Resources"
Replace the "EWSMacCompress.tar.gz" with the one from the eSR SDK dmg you just mounted

In one of my projects I used a third-party Jar-file. I placed it into the code/jars directory of my SAP BC package.
The "original" mail.jar resides in sapbc47/Server/lib. Ever tried to replace it with the newer one ?

Work arounds for XMP sidecar import problems?

Hi, I was wondering if anyone has figured out a workaround for the fact the Aperture 2.x doesn't support importing EXIF data with pictures that have sidecar .xmp files. Applescript? Something else? If not, I was thinking about trying to solve it myself. I'm wondering about the new plugin architecture or Applescript. I really don't know much about the details of either and I'm wondering if it's even possible.
Note that I write Mac software professionally (I used to be a dev lead on Entourage), so if we can figure out a way to do it, I have the technical chops to get it done. Does anyone have any ideas? I'd at least try to get star ratings and keywords importing working from my Lightroom library. I have something like 12 thousand pictures I've painstakingly keyworded. It took me weeks. I'll cut off a toe before I do that again.
I really can't use Aperture until there is a solution for this. Call me crazy, but I really would have rather had this feature in 2.0 than tethered shooting, if a choice had to be made (thought Tethered shooting is dang cool).
Please Apple, help us out here. We're trying to use your product but you kinda screwed the pooch on this one... :-P
thanks,
Mike

No way to do this right now. I guess it might be possible to write an application that would parse the XMP metadata and then use Applescript to add it to Aperture. Actually, I think Annoture (a 3rd party product written to help migrate from iView Media Pro to Aperture) did this.
Other options are:
* Convert the RAW+XMP to a DNG file with Adobe's DNG converter or with Lightroom or ACR. Aperture can read the DNG file and will get the metatadata (ratings, keywords, etc.). You still won't get the adjustments.
* I've heard Photo Mechanic can do something similar -- actually write the data to the RAW file itself. If it can take the XMP and write it to the RAW you could import that.
I'd really love to see this feature as well, BTW. Makes it as easy to get stuff in to Aperture as to get it out.

How to work around audio sounding worse in Logic?

Hi Folks
We just bought Logic 8 for its MIDI, composing/scoring and loop/instrument resources. Have used Nuendo for 5 years, for audio for video, which has included some music creation.
I did some quick recording/playback audio tests and here's how I hear the results:
Voice recorded and played back in Nuendo sounds just like live. Voice recorded in Logic and played back in Logic sounds relatively flat and digital. Voice recorded in Nuendo and played back in Logic sounds relatively flat and digital. Voice recorded in Logic, exported as a file and played back in Nuendo sounds just like live voice and like it was recorded in Nuendo.
So how do you work around the crummy sounding audio in Logic? Is the problem only the audio playback within Logic? Do you compose in Logic, export as files and then mix in another app? If so, which app? Or do you know the export will sound better outside of Logic? Or what other adaptation have people come to?
Thanks for reading.

No audio problems with Logic Pro 8 my side. In fact, it is sounding somehow better than Logic Pro 7 and latency is better. 44/48/96 all sounds great! Bus, FX, output, EXS24, etc. etc. -- wonderful stuff.
Interface wise everything is at my finger tips and I didn't have to do anything to get my control surfaces to work (Mackie). Everything makes sense -- huge improvement over LP7. Really helps me explore being creative.
So far Logic Pro 8 is an amazing step forward -- good work Apple.
Thank you Apple.

Logic 7.1.1 OMF/AAF import work around

Similar Messages

Maybe you are looking for