Logic 7.1.1 Vs Reaktor Session 1.3.1

SO.......
boy is this turning into a 'mare and half. I picked up a new copy (yup i know its now discontinued) of Reaktor session last week. Although it states on the box that its able to open as an AU, and its also listed on the Audio Units Compatablility List http://docs.info.apple.com/article.html?artnum=300170 i don't seem to be able to get Session to pass the validation process. I read that it was a problem with Reaktor & 1.3.1 had it all licked, so i upgraded (the boxed version was 1.0) but... still no luck. Next i read it was a problem with the AU Validation process itself that was fixed in Logic 7.1, after upgrading from my version of Logic 7 i still can't get it to pass.
When i go into the AU Manager and force Reaktor to open, when i go back into the Track Mixer and open either Reaktor or Reaktor MFX i get the error message
ERROR CODE -1 WAS RETURNED BY THE COREAUDIO DRIVER.
and i can't open anything ensembles or anything, i just get a load of crossfader looking thingys.
anyone care offer some help. I do hear people don't seem to have this problem with Reaktor 5 but thats another load of cash i'd be stumping up for a lot of features i won't use, plus i feel if the Reaktor Session box states it will work as an AU then it should work!
anyone?
thanks.

well i've searched through the Reaktor forums but not seen any solutions, i noted there has been an amount of hotfixes for other NI products, but not this one. Figured there is alot more traffic on this forums, so i'd try here first..
heres the results of any manual rescans...
VALIDATING AUDIO UNIT: 'aumu' - 'NiRa' - 'nime'
ERROR: Manufacturer OSType should have at least one non-lower case character: 'nime'
Manufacturer String: Native Instruments
AudioUnit name: Reaktor Session
Component Info: Native Instruments Reaktor Session
ERROR: Error from retrieving Component Version for resource: -192
Component's Bundle Version: 0.0.0
* * FAIL
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 1841.714 ms
WARM:
Time to open AudioUnit: 357.011 ms
WARNING: Error from retrieving Component Version for resource: -192
FIRST TIME:
Initialization request for 2 inputs and 2 outputs
Succeeded: symmetric effect configuration
Time for initialization: 1.363 ms
* * PASS
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:1
Default Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x0000002B) 32-bit big-endian float, deinterleaved
Output Scope Bus Configuration:
Default Bus Count:1
Default Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x0000002B) 32-bit big-endian float, deinterleaved
* * PASS
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
PASS
* * PASS
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
* * PASS
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Host Callbacks
PASS
* * PASS
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
Component 'auvw' - 'NiRa' - '-NI-'
ERROR: View Component specified, but can't be found
Cocoa Views Available: 0
DEFAULT PRESET: 0, Name: <empty>
HAS FACTORY PRESETS
VERIFYING CLASS INFO
PASS
TESTING HOST CALLBACKS
PASS
* * FAIL
PUBLISHED PARAMETER INFO:
# # # 1000 Global Scope Parameters:
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set
WARNING: retrievedValue = 0.000000 (was 0.500000), Parameter did not retain default value when set
WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter d
[some output clipped here]
sing AudioUnitScheduleParameter
PASS
* * PASS
AU VALIDATION FAILED: CORRECT THE ERRORS ABOVE.
Error when reading version from AU.

Similar Messages

Logic Crashes trying to open a session file. Save copies often

I am having an unfortunate unique issue here. For whatever reason, Logic X has corrupted/infected several session files within my project. I have not been able to open my main or many backup session files within a project. Every time I open, crash and then this error bellow. I have tried every trick in the book. Crashes when i try to import the session in a new session, even tried tricking an older file that works with the new session files backup's inserted. Crashes + infects the working session file. This has been very frustrating. I don't feel I did anything to make the file corrupt. Lost a lot of time here and was wondering if anyone knows a solution.. Can one of you Apple people help me recover this file somehow? It's for a bigger client of mine so I would like to get the progress back. There seems to be no way of getting in so far
Thanks
P
Process:         Logic Pro X [1728]
Path:            /Applications/Logic Pro X.app/Contents/MacOS/Logic Pro X
Identifier:      com.apple.logic10
Version:         10.0.4 (2911.63)
Build Info:      MALogic-2911063000000000~16
App Item ID:     634148309
App External ID: 73352631
Code Type:       X86-64 (Native)
Parent Process: launchd [211]
Responsible:     Logic Pro X [1728]
User ID:         502
Date/Time:       2013-12-07 11:11:12.932 -0800
OS Version:      Mac OS X 10.9 (13A603)
Report Version: 11
Anonymous UUID:
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
*** error for object 0x7fd1a3816c08: incorrect checksum for freed object - object was probably modified after being freed.

There are no Apple employees here but....
Have you tried using the Selective Track Import (STI) feature to recover the tracks one by one from your corrupted project to a new one?
This video is for LP9 but STI works much the same way in LPX and is one of the most useful little 'gadgets' in LP's toobox...
http://support.apple.com/kb/VI255
and a detailed outline with screenshots can be found here...
http://music.tutsplus.com/tutorials/how-to-use-selective-track-import-in-logic-p ro-9--audio-3181
Just create a new project.. and then import one track at a time from your old project into the new one, testing after each to help you identify the problem causing parts of your old project...

Waves AU crashes Logic 7 when quiting or opening sessions

Hello,
I have this crash every time that I close a session in Logic and try to open another one.
The crash report says in their first 8 threads logs about Waves. The first one reads:
1 com.Waves.AU.plugin.shell 0x30f6e60c CallPlugin_DeleteInstance(PluginInstance&) + 28
If I take the Waveshell component out of the plugins/components folder, the problem is gonne, but so my $2,000 waves bundles.
I'm using Logic 7.2 & 7.1 in a G5 dual 2.0 ghz, 7 gb of RAM and a MOTU 2408 running Waves 5 in native mode. I've already downloaded the AU validator 5.0.1. I have 2 iLoks with differenrent waves licences in each. (can this be a problem?)
Any one with this problem?
Daniel
G5 Dual 2 ghz Mac OS X (10.4.4)

This is a 1st! Just the thought is scary. Call Apple, or go to an Apple store and make them find an answer for you.
P.S. Please post any information on this buggy behavior.

Configure IVI Logical Name to use different Driver Session programmatically

Hi,
Is it possible to change the Driver Session associated with an IVI Logical Name in Labview ?
thanks,
Gary.

Hi Gary,
Unfortunately there is no function in LabVIEW that does any IVI setup. All of the configurations for your driver sessions and logical names need to be set in MAX, and saved. So while you can change the driver session a logical name uses, you can only do this through MAX.
Kind regards,
Sheela Sujeeun
Applications Engineer
National Instruments UK

Why does Reaktor keep freezing Logic Pro X?

I have an early 2009 Macbook Pro with 8gb Ram. Usually sufficient enough to run other NI Plugins inside Logic. For as long as I can remember Reaktor has always been really unreliable and now everytime I load Reaktor as a plugin or effect plugin and change bettween presets (inside Reaktor) a few times it gives me the spinning beach ball of death. I moved the Logic.plist and the Reaktor.plist out and back in and even re-installed Logic X. I can run Reaktor in stand alone just fine and also inside of Maschine 2.0 JUST FINE... no issues, however inside of Logic X it freezes EVERY TIME. I've double checked all my settings inside Logic and everything seems to be right. Further I'm running Mavericks and before that Mountain Lion and Logic was really unstable with ML too. I was hoping maybe the operating system update would help! And lastly when I click "get info" for Logic Pro I don't have an option to switch between 32 bit or 64 bit like some people do. I don't know why this is... And I'm just going to guess I'm running in 32 bit. I could be wrong. If any of this sounds familiar to you please leave a response and guide me in the right direction. Is Reaktor just a sketchy *** plug in or is there some setting I'm missing or what?
Thank you!!!!!!
Erik-

1) Logic Pro X doesn't run in 32bit mode... It's a 64bit only application now.. so thats why you don't see the "Run in 32bit mode" option.... You only see that if you are running the older Logic Pro 9. This is also related to why LPX only uses 64bit AU plugins these days... and not the older 32bit only plugins.
2) What version of Reaktor are you running? 4 or 5? v4 can be very unstable, especially when running it in 64bit mode so you may need to buy the v5 upgrade to resolve this issue.
3) If you are running the current v5... Have you updated Reaktor via NI's Service Center, to the latest sub version? (I think the latest one is v5.9.0 at this time)
Note: I was working with a client 4 days ago.. and he was using the latest Reaktor extensively with Mav 10.9.3 and LPX 10.0.7 and had no issues throughout the 6 hour session (I just checked with him to make sure I had all the version numbers correct)

Open sessions in Logic Pro by (default) instead of logic express

Hello , I just upgraded from logic express 7.2 to logic Pro 7.2 and my sessions are still opening in logic express as the default app. Is there any way to have them open in logic pro automatically?

thanx alot , that did it .Im glad I joined and
posted because I was about to delete the Logic
express app . but thanx again for the reply and
hospitality .
CB, Hi, I am thinking of doing the same upgrade as yourself. Now that you have the answer to your problem, is the 'transfer' of songs from Express to Pro 'seamless'. I.e. I take it that there are no problems transferring work done in Express to Pro? Like yourself, I am a relative newcomer to this forum etc

Need help importing session from Korg Triton Extreme into logic

I am trying to import a full midi session that was sequenced on my Triton into Logic Pro9. The problem I'm having is that when I record in, all 16 midi channels are sending to one Logic midi track. Is there a way to import the full midi session into logic so I can edit the session in logic on the 16 individual tracks? Any help would be great!

I think the triton can save standard midi files. Importing that file into logic would be the best and cleanest solution.
Cheers,
Jazz

HD video out from Logic - possible?

I have been trying to find if there is a way to get HD video out to an external monitor from Logic. Tried a Decklink "Intensity" card, wouldn't output HD. I called Aja and Decklink, neither company could tell me if it's possible with any of their products.
Another alternative would be to use a second video card and convert DVI to HDMI (I have two 30" monitors so am already using the two DVI outputs on the main video card), I want to output to a 47" TV monitor for client presentations. In the old days, it was always recommended not to use a second video card with music DAWs because of slowing down the PCI buss - is this still the case with the latest Mac Pro's?

The other thing we've done in the studio when working on films is to use two separate machines. One machine is running ProTools HD and it's the on that plays the video. Use MTC to lock the machines together, you hit play in Logic and hey presto, the ProTools locks to it and plays your video. No reason why you couldn't do this with two machines running Logic. The advantage with using ProTools (HD) is that you can have all of your reels in the one session, one after the other. Then (if your Logic work is properly organized and all of your cues have start points at the correct TC, then you don't even need to change ProTools sessions even once. You can switch between Logic projects (for each music cue) and the ProTools session will happily jump to the right part of the video at all times. This way you eliminate the question of trying to get the one machine to handle everything. Yes it's more of the old-school sync'd up video deck concept, but once you set it up, it's much faster and it works great. You can even route all of your physical outputs from Logic directly into the ProTools inputs and do one-pass (or almost one-pass) striping of all your Logic work to prepare your ProTools sessions for the orchestral sessions. We've done this for a couple of films and it was a very effective way of working.

Logic Pro X - Disk is too slow or System Overload. (-10010)

Hi there, I'm a professional music user and recently switched from Pro-Tools to Logic due to PT11's lack of third party plug-in support at the moment. I was looking forward to leaving behind the error messages of Pro-Tools for the supposed plain sailing of Logic. However, after installing Logic X and starting a new session with one track of audio and 4 tracks of software instruments, I'm receiving the following error message when attemping to record a part on one of the software instruments. 'Disk is too slow or System Overload. (-10010)'
I have an 8 core Mac Pro with the latest version of Mountain Lion, 16GB of Ram and a 250GB SSD boot drive (which Logic is installed on). My sessions are ran from a secondary 120GB SSD which has 110GB of free space on it and my sample libraries are streamed from another internal 250GB SSD and a 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive. My interface is a Focusrite Scarlett 6i6 USB 2.0 and my I/O buffer is set to 512.
It is completely unacceptable to me that I should be experiencing error messages with this set up and a 64 bit DAW, particularly when the session in question only has one track of audio and one instance of East West's Play engine, spread across 4 software instrument tracks.
Has anyone else experienced similar problems or have any ideas as to what the solution could be? I'd really appreciate any advice.
Cheers,
David

Just as a quick followup....
After doing a little research online it seems the Scarlett is one of those USB2 devices that has issues with how Apple changed their implementation of USB when they released Macs with USB3 interfaces and put this updated implementation into Lion and later Mountain Lion... and that this is probably why some people have major issues like the OP is reporting and why other's do not. It depends on the hardware/OS X version combination as to if this issue rears it's ugly head.
Oddly enough some Win 8 users are also reporting similar issues with the Scarlett for much the same reason.
The March 2013 Scarlett OS X drivers are intended to 'alleviate' this issue but Focusrite have stated it is only to 'alleviate' in some instances and not completely fix the problem for everyone who has it,.,..
However, the good news is that Focusrite have released some beta drivers (v1.7b2 and later b3) which seem to work better for some people than the last official release...
Mac Only.
General stability/logging improvements:
- Improved audio stream syncing
- Fixed bug which results in occasional inaccurate timestamps
- Improves sample rate switching
- 18i20 stream formats now switch automatically
- Fixes Forte streaming at 176.4/192kHz
You can find them here..
http://beta.focusrite.com
Note: These beta drivers again seem to only alleviate the issues for some people and not all but it has got to be worth giving them a try I would think...

Servlet session problem

hi all,
I am new to servlet. i have creted a server program and many user can login using thier username ,role and password. if more than one user can login simultaneously i could nt able to mainatin the session, it always showing the last login datas to all users(who'slogin earlier). how do i solve this and please any one explain me with some example?
regards
sm

if more than one user can login simultaneously i could nt able to mainatin the session, it always showing the last login datas to all users(who'slogin earlier). Do you mean to say different users logging into the system using same browser window?
how do i solve thisThis is more about what do you want to do? One solution might be :- if the user authentication succeeds, add a logic that will invalidate the previous session and create a new session for this new user.

Using laptop as Logic tone module - best 2ch audio interface?

I want to use Logic as my sounds for live session and in the studio. What do you guys recommend for a 2 channel studio mixing quality audio/midi interface that I can run to the board.
M-audio?
MOTU?
ECHO?
Your Idea?
Thanks!

I use the Power Trio and it works great. There have been a few software issues along the way but what software doesn't have issues. My best advice is to check it out for yourself. The duet is a great interface the sound is fantastic. Based on it's performance and sound I would get the Ensemble if I needed more in's and out's.
I replaced the older Mackie Control with a MC mix and couldn't be happier. My MCU never worked right from the non calibrating faders to the fact it needed it's own midi interface to work properly. I'm sure the new MCU works a lot better but it's still huge.The space on my desktop where the MCU would sit is now taken by MC MIX, MC Transport, 4 Hard drives,Akai MPD 24,FirewireUSB hub, Ethernet Desktop switch. The MC MIx is a gem, plug and play. I'm really starting to dig in to pulling up plugins on it and tweaking them from the MC Mix and controlling duet from the MC Mix also.
I went with these products based on their reputation for making quality stuff and plug in play operation with Apple but if it didn't work I would return it.

Is it possible to use run-time configuration in conjunction with Session Manager?

I'm trying to avoid using MAX, basically because it's a pain for users to configure MAX when the application already knows what the configuration is. I actually get the configuration from a database, but that's another story. I've experimented with run-time configuration (see page 4-31 of the 'IVI Driver Toolset' manual) and it works fine. However, when I try to use this in conjunction with Session Manager, session manager complains that my logical name is not a driver session name. I suspect that Session Manager is looking up logical names from a different source, therefore run-time configuration won't work. Any suggestions? I've attached the files I'm working with.
Attachments:
SessionMgrTrial.zip ‏41 KB

Hello Mark:
The Session Manager GetLogicalNames method does not distiguish between logical names and virtual instrument names. A user of the method cannot ask for just logical names or just virtual instrument names. Right now you always get both. The new function is called InstrSessionMgr.GetNames. Notice that the online help file says Boolean for the flags parameter when it is an enum.
Hope this helps. If you have any further queries, please let us know.
-NI support
National Instruments - Software IS the instrument!
Attachments:
help.gif ‏22 KB

Import PT session, 003+ user

Hi guys,
I'd like to import some PT TDM session into logic.
1) When opening TDM session with PT LE, what kind of problems should I be aware of? I know, there is the track number limitation.
2) Are there any other problems I should be aware of? Workarounds?
3) How complicated is it to import a session with more than 32 tracks into PT LE and whats the best way to export the complete session to logic if needed?
Thanks in advance,
Eddie

Eddie Eagle wrote:
Hi guys,
I'd like to import some PT TDM session into logic.
1) When opening TDM session with PT LE, what kind of problems should I be aware of? I know, there is the track number limitation.
Any TDM plug-ins will not open inside LE. If you can, switch them out for RTAS plugins, and save the settings also.
2) Are there any other problems I should be aware of? Workarounds?
You should Render (altcommandkeyboard #3) al the audio files, and have them rendered startign at the same point, for easier lining up in Logic later on.
3) How complicated is it to import a session with more than 32 tracks into PT LE and whats the best way to export the complete session to logic if needed?
You can import the whole session, and after you are done rendering tracks 1-32, along with plugins, etc... then turn off the voices for tracks 1-32, and turn on the voices for tracks 33 and up.
If you are lucky and can have some of the plug-ins as Audio Units as well, then less work for you. this is why I have moves more and more towards third party plugins like Waves, which have TDM, RTAS and Audio Units. this way all I have to save on those if the settings, and notes on each song as far as what plugin goes where, but I no longer have to render the audio with the plugin effect included.
Thanks in advance,
Eddie
Cheers

Why is Logic crashing upon quitting (have to Force Quit)?

Logic is crashing whenever I quit. Logic prompts me to save the session like normal and then "flashes" before freezing and necessitating me to Force Quit. This just started happening a few weeks ago.
Thanks

Things to check...
You are using the latest version of drivers/software for your Maschine, Apogee, ADVC-55 and SL MkII devices
Failing that, Shut down your Mac, unplug all external devices and start up Mac. Test LPX using internal Audio and Musical Typing Keyboard with new project....
If that works normally then...
Delete both Logic's prefs and the CS prefs as detailed here...
Quit Logic Pro
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Note:If you cannot find either of these files you did not follow all the steps exactly as described!
Now...
Plug in each of your external devices, one at a time.. restarting your Mac each time to ensure which, if any device, is the source of the problem...
Additional: You may have to install and set up your SL MkII again after deleting the CS (Control Surface) prefs
If that doesn't help then as a troubleshooting step....
Please download Etrecheck from here...
http://www.etresoft.com/etrecheck
..and then launch Logic Pro (But don't load up a project)
Now run Etrecheck and post up the full report here....
Thanks...
Nigel

Kill user's session via ABAP (like in SM04)

Does anybody knows is it possible to kill user's session via ABAP? Not all session like via TH_DELETE_USER, but selectively, session by session.
Maybe someone know how to trace which logic works when we press "Close session" button in SM04?

Hi Michael,
below a snippet to retrieve the sessions and a way to delete a TID.
Maybe it come in handy for your requirement.
Best,
Sander
INCLUDE tskhincl.
   DATA lt_userlist TYPE STANDARD TABLE OF uinfo.
   DATA ls_userlist TYPE uinfo.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_list
         ID 'TABUSR' FIELD lt_userlist .
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_delete_usr
     ID 'TID' FIELD ls_userlist-tid.

Logic 7.1.1 Vs Reaktor Session 1.3.1

Similar Messages

Maybe you are looking for