Logic 7.1 and OSX 10.6.6
Hi all,
I've been running L7.1 on my old G5 for about 5 years now, I've never before upgraded (should have I know).
I've now also got a mbpro running OSX 10.6.6, I've installed 7.1 on my new mb without even thinking about the difference in chipsets, 7.1 has installed ok but I no longer can see any of the logic plug ins, sculpture esx24 etc...
Looking on here it seems that installing 7.1 on osx 10.6.6 may not have been the best idea... my question is this...
If if upgraded to latest L9 by choosing upgrade in the apple store (cheapest method) would the upgrade work fine seeing as I'm upgrading from 7.1???
Cheers for the help
You MUST have at least Logic 7.2 to work on the Intel Mac.
That was a paid update, idiotically.
Upgrading to L9 would work fine, but not on the PowerMac.
Similar Messages
-
Is anybody else getting external MIDI clock tempo issues using Logic Pro 9 and OSX Lion 10.7.5?
I am having really serious tempo issues when sending midi clock to any external device - The tempo wavers and alternates around 5 bpm above and below the tempo set, and to be frank is totally unuasable when trying to clock arps from hardware synths.
I have the problem both with Logic and Ableton LE, as well as through both my MOTU Ultralite and Focusrite Liquid Sapphire 56 interfaces. I am therefore presuming this is a MIDI issue with the actual computer (MacBook pro, bought new last september).
I moved to Mac from PC, so I'm not totally up to scratch with the Mac architecture yet - can anybody shed any light on why this is happening? It's driving me mad!Pancenter,
Yes.. I do see the occasional minor variations much like yourself when I sync up to my Oasys or more usually the Motif... to a fair sized and complicated project,,. Maybe +/- 1.. or on rare occasions +/- 2 bpm... but nothing close to the OP's +/- 5 bpm experiences...
It actually got better for me when I installed 10.8.x... along with the newest Motu drivers.. and in fact I can't remember the last time I had any unworkable issues with syncing though admittedly I haven't done that much syncing recently.
I do have a project coming up in the next 10 days.. that will require me to use the Oasys synced to Logic so I'll make a note of any issues i have and post back if any occur.
As an aside, I have recently been doing a lot of work with iPad Instruments and Arp Apps and Logic... and the sync as been rock solid over USB... -
Logic Express 8 and OSX 10.6.5 Problems...
Hi,
I just did a fresh install of all of my software on my iMac.
Previously had it running 10.6.4 and everything an fine.
Now that I've reinstalled and upgraded to 10.6.5 Logic Express won't work.
Anyone else having this problem? Am I just ging to have to upgrade to 9?
I don't really want to as I mainly use Pro Tools and just use logic for drum machines and synths...
Anyway! Any help is appreciated!I'm running 10.6.5 and LE 8 and it works for me. Of course I have a new imac that came installed with 10.6.5 and I installed LE on it. Maybe you can re-install LE. But hopefully there is another solution. I too don't really want to upgrade to LE 9 if I don't have to.
-
Logic 8.2 and OSX 10.5.6 And Amplitube 2 Clicks And Pops??
I have what I think is a pretty fast comp...I never had issues really running Amplitube until it seems I upgraded from earlier Leopard to 10.5.4...Thats the only plug in that causes clicks and pops...Ive got latest update for Amplitube and Logic..but they havent released update in a while for Amplitube...Any ideas?? Has anyone heard of this issue yet..Is there something Im missing or is this a typical situation of upgrading my system to far? Thanks,
Oh... oh! comp = computer!
Sorry, I re-read this post several times and I couldn't figure out why having a fast compressor would cause clicks and pops... I thought maybe the attack was set so fast that it was causing artifacts. I must be working too hard...
FWIW, I don't have any issues with Amplitube 2 on 10.5.6 with Logic 8.0.2. Buffer size, perhaps? -
After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers... -
after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks
YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
HT5887 Why doesn't AirDrop work between iOS and OSX?
Apple has almost always never fail to seamlessly integrate its devices, until now? I understand that there is iCloud for content sharing between devices. However, AirDrop was introduced as a simpler way for users to not only share contents between their own devices but as well as other users. I understand that the logic behind AirDrop was practiced by windows users since the creation of modem, though it requires many complex steps and compatibility checks to achieve a simple logic. (and Windows never really bothered with perfecting it over all these years, its improved, still buggy)
My question is, why can't we share contents between iOS and OSX? Everytime I need to transfer some files/content, the quickest way I could think of is to send an email to myself. Just the other day I tried to have my colleague AirDrop a file from his 5S to my MBP. I told him with great confidence that this tech existed long ago, and finally Apple decide to kick some DOS *** and launch a super simple version. And that it should by right work with any device with BT and/or WiFi, but knowing Apple, it would only be for their own products. Not in my wildest dreams it didn't work cross OS.
Forget the embarassment, I want to be pampered by this seamless technology. I want the type of exclusiveness with my fellow family and friends of which majority are Apple lovers. I want to regain the confidence that whenever I step out of my room, whichever device I carry/left out, I can do/resume/engage everything as long as I carry an Apple device.
Music, Videos, E-mails, Docs, Images, iMessages, are all checked. So why not Content Sharing?We would like to know the answer as much as you would. All you can to direct your questions to the only people who can really answer: http://www.apple.com/feedback/
-
Logic 9.5.1 OSX 10.6.8 Midi time out?
After having used Logic and it's predecessors for over 20 years now I today got this strange warning message for the first time ever:
Midi time out, please restart your computer - hitting OK didn't make the warning go away, it kept on popping up.
I then forced quit Logic and rebooted it and everything was fine again. But has anyone ever encountered this message? Midi time out, do I have to insert 2 Euro coins somewhere maybe to get more Midi time??
I only updated to Logic 9.1.5 and OSX 10.6.8 (from 10.6.7 before) on my studio machine yesterday so maybe that's the culprit?
Thank's
SimonI had the same issue with Logic Pro 9 when I updated to Lion. Also, GarageBand would not "Initialize."
This was my fault of course:
When I finished the (Lion) installation I ignored the "Incompatible Software" warning folder, and went ahead and continued editing my Pro Tools LE 8.04 sessions as well as Logic Pro 9 sessions. I was pleased that the apparent "Incompatible version" of Pro Tools continued to work. That is, until the next day, when I tried to open a logic session it froze on the "searching for Midi drivers" screen. Eventually it would open, but, it would not run.
After searching for a practical solution. I gave up and stuck my Pro Tools LE 8 disc in and did a "FULL CLEAN UNINSTALL." As a precaution I also deleted "Melodnye stand alone". Although I believe the true melodyne incompatibility came from the Pro Tools disc. Which included a "ReWire" version. I rebooted, and, everything worked fine.
The moral of the (MY) story is:
-Upon updating your OS, Take Apple's precautions seriously. They know what they're doing and I'm thankful that they are wise enough to quarantine software that will screw up drivers.
-Also. I had heard that Pro Tools was compatible with Lion, yet, I failed to further investigate that PRO TOOLS LE 8 IS NOT COMPATIBLE WITH LION! Only versions 9 and up. I believe that means M powered 9 is compatible too (but don't quote me on that). I'm ok with that, as i've grown to like Logic more. Although, I hate to see money go down the drain. -
Problems with FCP 5.1.4 and OSX 10.4.9
I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric -
HT5421 Logic Pro 8 and OS 10.8.2 ?
Hi there, I want to installed Logic Pro 8 ( an upgrade version ) on my Macbook Pro with OS 10.8.2 and when I click on the installer on the DVD, the message is : You can’t open the application “LogicStudio.mpkg” because PowerPC applications are no longer supported. Is that mean that it is no compatible ? what can I do ? Thanks.
I had this issue as well.
Check your Logic 8 packaging and see if you see "Universal Binary" written on the back or spine of the box.
Logic 8 in later releases was both PowerPC and Intel supported. However I get the error "cannot run PowerPC applications" on OS 10.8 on my new MacBookPro.
The cause of this is most likely that the installer was a PowerPC application, and Apple assumed at the time you could just run Rosetta for the installation.
Solution: install Logic 8 on an older Mac, run a Timemachine backup of your mac, then plug your Timemachine harddrive into your new mac and run Migration Assistant (Under Utilties)
Works perfect, even the plugins and Apple Loops carry over. It works 100% perfectly good. If you have the "Universal Binary" version there is no need to buy Logic 9.
I wasn't really "wow'd" with the new features of 9 and thought I would hold off until 10 to upgrade. This was 3 years ago. I still use Logic but it's amazing how cutting edge it used to be, and how far Pro Tools and Cubase and FL studio have come in the mean time.
Hope this helps -
Logic Pro 9 and GarageBand '11 won't recognize MIDI controllers
Hi there,
I have two MIDI controllers that are not getting picked up by Logic or Garage Band and I'm unable to figure out why. I'm running Mac OS 10.9.4 (Mavericks) on a Mac Mini with a 250 GB SSD and 4 GB of RAM.
Setup 1 is a simple Acorn Masterkey 49 USB controller whose manufacturer claims needs no drivers, although it doesn't show up in my Audio/MIDI setup pane at all, no matter how many times I restart the computer and/or the controller in any combination. I can't use it with Logic or with Garage Band.
Setup 2 is a Digi002 Rack connected to the Mac Mini by Firewire and connected to an old-school Korg M1 as a MIDI controller. I can launch and hear the tracks I've made in the past with Logic, but now that Korg M1 is invisible even though the Core Audio Manager says my Digi002 Rack is connected and running. This setup has really never been able to speak with Garage Band, although I have been able to connect it successfully in the past.
I'm a newbie to this and don't know how to get under the hood to fine-tune MIDI set-ups within Logic or GarageBand. Is there something funky going on between Logic 9 and Mavericks, however? I'm beginning to wonder if that's the issue.
With thanks,
Dustin.Hi Dustin,
Nice to see someone pose a complete question with all the details...
First thing to do would be to delete Logic's preferences and the control surface preferences. Although I don't think it's going to help. I'll post the method at the end of this post.
One of the problem with older MIDI devices is that Apple changed something in their MIDI spec and some older MIDI devices either don't work (not recognized) or if they are recognized don't work reliably. Another problem, depending on ho old your Mac Mini is, the newer machines have USB 3.0 ports and that poses another hurdle.
Here's two things to try for the Acorn.
Turn the computer off, unplug the Acorn's USB cable. Restart the MacMini and let it settle for a couple of minutes, open Audio-MIDI Setup... plug the Acorn in, see if there's and life.
Try a powered USB 2.0 USB Hub, a hub that has it's own power supply. If you don't have one maybe you can borrow one as it's only a -possible- solution.
The Problem with the M! and Digi002 may be related. Are you using the very latest drivers available for the 002? Again, this may be a MIDI compatibility problem, although I thought this was USB only, I suspect it's more of a Digi002 driver issue with Mavericks than anything else.
MIDI Out on the M1 to MIDI IN on the 002
Delete the Logic 9 preferences file and control surfaces file.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic.pro.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
If you are having trouble with a control surface in Logic Pro. then delete the com.apple.logic.pro.cs file from the preferences folder.
Be sure to include the Tilde~ in the path name above, be sure and delete both files. -
Logic 9 crashed and won't open again
Hello everyone,
I have the latest Logic Pro 9 and I'm working on a MacBook Pro
2.7 ghz
4 gigs memory.
Started recording a track with midi and audio tracks,
At one point logic crashed so I reopened it and kept recording.
Everything was fine,then I shut my computer down and opened
It again and it started searching for my battery drums which are all in the correct folder.
After a few battery drum searches it just stays there trying to load ??!
No more dialog messages ?
I have never ever had an issue with either logic or my MacBook Pro.
I try to open up early saves and sometimes it opens but not all the time.
Anyone having the same issue ??
Also since my system crashed I opened a fresh logic and dragged and dropped all the midi and audio files to a brand new project and I'm still having the same issue,it won't fully load up ?
I'm starting to wonder if battery is messing with the computer ?
The only fix I found was to shut down the computer and start it up again and then it loads sometimes ??
Any advice would be helpful,
Thank youIt seems you have a corrupted Project so to rescue most of the data from this corrupted project you can open a new project and then use the Import Data feature of Logic to bring across the tracks from your corrupted project... to this new Project
See this part of the Help Guide for further info...
http://help.apple.com/logicpro/mac/9.1.6/en/logicpro/usermanual/index.html#chapt er=7%26section=6%26tasks=true
If you need more help after reading the Guide, let us know... -
when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.
Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
i have a late 2006 20" imac and have been recording some covers and have been able to find canastas (solos). i made sacrifices to purchase apps with an ID for years. I left to colorado and found work at venues i had send my demos to. when i got back home my house had been broken into and much of my studio gear had been vandalized beyond repair. i did not have a firmware password set on my mac and the derelects stole and deleted work related information. i called the people at mac and they told me that they did not have any information that my ID was not on any of their files and had never even been created. today i created a new ID. How am i going to get back all the number of purchases i made especially Logic Pro 9 and the other apps back as they now have been upgraded when apple does not even have an ink mark from my old ID? i use a Focusrite 12 channel interface with a 6 channel xenyx with 48 phantom and since all my originals can't be number one's my Americana recordings have some very profound grooves. I am 53 yrs. old and play all the instruments except the bass lines. These phatos that destroyed many of my archives are muncho malo! i started on the kit in the 3rd grade and started playing behind some big names at 13. Over the years most all of the other basic instruments kept making it easier for me to survive at what ever the venue called for. i never gave up the music for the show. After a gratuitous 40 yrs. of dedication and 34 yrs. of a solid marriage. i am a loyal dog. i can only feel better if the folks at apple will allow me to redownload with my new ID to keep producing. IF not i will have to bow my way out of college since that is my only way i have been able to afford my out of district tuition.
Whew, so sorry to hear Jimmy.
Try Apple's Express Lane...
https://expresslane.apple.com/
If that doesn't work, call apple support, work your way upto Customer Relations.
Good Luck & eep us posted please. -
ITunes 7.5 and OSX 10.4.11 - CANNOT CONNECT TO iTUNES STORE
After a recent upgrade to iTunes 7.5 and OSX 10.4.11, I can no longer connect to the iTunes store. I have tried reinstalling iTunes 7.5 (and Quicktime - just in case!). I have also tried Keychain First Aid. Still it is broken. Please help me with this problem if you know of a fix.
i can't connect to the itunes store on 2 out of 3 macs in the house!!! this occurred in the last 48 hrs or so... although i downloaded a movie this week which took ages vs the normal time.
all connected through the same airport & have same settings & all other internet stuff fine.
i don't have any snitch.
i checked versions of software for os x and itunes on each machine:
(cannot connect) powerbook g4 runs 10.4.11 and itunes 7.5
(cannot connect) macbook 2.2 ghz runs 10.5.1 and itunes 7.5
(connects to store) macbook 2 ghz runs 10.4.10 and itunes 7.4.2
would indicate something wrong with itunes 7.5 but can't be sure...
Help pls...
Maybe you are looking for
-
ITunes 10.7 update kills wifi on Win7
I've fixed a problem I was having and hope that maybe this thread helps someone else having a similar issue. My computer has Win7 with all the updates as I do updates religiously as soon as I'm notified there's something to install. My wifi connectio
-
Simple Transformation - XML to Internal Table Error
I have a webservice call that returns XML. I need to transform a portion of the response to an internal table, but my simple transformation is not working with loop processing. I have read through most posts regarding the topic but they're either t
-
How to use the userid and password infor from Oracle DB in BO
Out client has the userid and passwords(encrypted) infomration stored in oracle table. Is it possible to import this useid and password information into BO .And use the same userid and password from Oracle table for its login authentication and for d
-
Entry Point not visible in Navigation
Hello, we have a strange behaviour in the portal. We created a role and assigned Worksets, Pages and iViews to the role. The role is defined as an entry point. So long everything worked fine. We transported the whole package to an other system. On th
-
I am unable to open my Finder. error -10810 appears saying "The application Finder can't be opened". Any suggestions, I'm stumped! {I'm on a new iMac 10.6.8} thank you!