Logic 7.2 , UAD 1 and waves

Does anyone know if waves plugins do work w/ Logic 7.2? I have an mac pro 3ghz 4 gigs of ram. I am using waves 5.2 for w/intel support. Cubase SX3, Spark XL and Logic LE see the waves and load correctly. Logic 7.2 does not see the waves folder at all niether does waveburner. But logic does see the uad 1 but Cubase and Logic LE cannot connect to the UAD 1 hardware. Any one else having this problem?
G4 dual 867, G5 2.0 dual, imac G4 1.33, Mac Pro 3GHz   Mac OS X (10.4.8)  

If LE sees the Waves plugs, but LP doesn't, then then only difference is probably the AU Manager. Start that (Logic -> Preferences -> Start AU Manager), and make sure that the Waves stuff is enabled and passes validation.
As for the UAD, run the UAD meter application. Does that correctly report the UAD-1 card is running and working correctly?

Similar Messages

  • What is the best configuration with logic 7.1.1 and osx 10.4.4?

    I have a dual 2.3 ghz and 1.5 gig ram, i have powercore element, uad -1, waves , pluggo, all NI. motu 828 mk2 with logic 7.1.1. Right now my buffer size is at 256 .
    I am working on a track where cpu is at near 80%, which my dual g4 1ghz handle the same with the same track by the way , i got audio dropped, randomly, i though the buffer size was too low, then i put it at 512, it is 10 x times worst. anyone has an idea??
    thankx in advance!!

    That's not normally a solution when you're running out of CPU power, but it's certainly worth trying.

  • Logic Pro 7.2 and Tascam FW-1884 Not Working

    I recently upgraded to Logic Pro 7.2 and I'm using a Tascam FW-1884 as my audio interface / Control Surface. Everything was working fine in 7.1.1, but now it doesn't work correctly. When I press buttons and faders on the Tascam I see MIDI information changing in Logic, but not in any of the correct places. When I click on the screen controls in Logic the Tascam does reflect the same on the board, but not the other way around? I updates the Tascam Plug-In (.bundle) file, the Control Panel, and even the Firmware. Still does not work. The faders go up on boot-up and down when I quit the program, but that is it. Any help would be greatly appreciated? I'm using a Mac G5, dual 2.7ghz processors, and 2.5 gigs in RAM. My gut is telling me it's something with the upgrade, but maybe others have resolved the problem without reprogramming every control one by one.
    G5 Dual 2.7GHz   Mac OS X (10.4.6)   2.5 Megs RAM

    Mr. Walden,
    I recently switched to Macintosh and am learning to use Garage Band. I have an 1884, as do you, and I plan to invest in Logic Express. Do you have any comments or suggestions concerning the marriage between Logic and the 1884?
    s

  • Logic 9.1.5 and Lion. Interface unresponsive.

    I'm experiencing a very strange issue with logic 9. The interface becomes unresponsive, I can't click on any buttons in plugin windows / transport bar / mixer page.... anywhere while the project is playing. The keyboard is equally unresponsive i.e. I can't stop with space bar etc. The clicks / keystrokes are being recognised by them system as after a while, usually about 5-10 seconds, the messages get throughout to logic. If a 'stop' message get though from the keyboard or transport bar stop button, as soon as the project stops... I can see all the clicks/keystrokes in the buffer all get executed at once in a bulk dump, which can be in the hundreds of commands if I get pareticulary frustrated. This is not a problem with overloading the audio engine. My quad core mac is only showing 1 or 2 notches of activity on all cores in logics system performance meter and activity monitor shows I'm only using %10 of available CPU. The rest of the system is unaffected. Safari / Mail etc work as usual. Closing any other open apps doesn't help. It happens on my MOTU ultralite [i]and[/i] Apogee Duet. It happens at [i]any[/i] I/O buffer setting and [i]any[/i] size reasonable size project. I have one open now with 15 tracks and about 20 or so plugins, my mac should barely even register this on the performance meter.
    Other users are reporting the same issues here and note the Logic 7's interface is near instantaneous on the same system.
    https://discussions.apple.com/thread/2396951?start=0&tstart=0
    Anyone have any ideas?

    I was joking... sorry for my english
    anyway: I'm running a top of the line Imac, Mac Os 10.7.1 (that came preinstalled) and Logic 9.15. a full Apple rig... It's not unrealistic to expect a normal performance. IMO it's a little sub-par.
    Regarding Logic, the last thing I want is they make things "simpler"... It ussually means less options. If I'd want a simpler interface and less options I'd go with protools in a breeze as it's the de facto standard and it's a lot simpler.  If somebody wants even simpler things Garage Band is the way to go...not Logic.  Why people don't ask for a more complex GB instead of a simpler Logic?. The program has TONS of places to improve: PDC is a mess, there are LOTS of bugs, and I can think not less than 20 real improvements. None of them makes things simpler. IMHO it has to be professional, not "simpler". Playing piano is very simple, but it takes time and effort to master it.  I don't agree with this childist society thinking that everything has to be so simple that any ignorant can drive it. This is a professional tool for professionals, or it should be.
    That said, I also like the new features in Lion. Problem is: I use my machine for work not for some eye candy. If that were the case I'd buy an Ipad.
    regards

  • How many computers can i load my downloaded logic pro on? and can i sell my logic 8... or do i need it?

    how many computers can i load my downloaded logic pro on? and can i sell my logic 8... or do i need it?

    This is the mainadvantage of purchaseing apps from the app store:
    Go to the "App Store" app under the Apple menu.
    Login with your Apple ID account (the one you purchase Logic)
    Go to the Purchases tab where you find all the apps that you purchased with that Apple ID
    Any app that is not installed on the current computer is ready for download
    Download and install the app
    Done.
    Hoe that helps
    Edgar Rothermich

  • MP3 and WAV tagging Prog

    I have hundreds of albums ripped into my PC and I am trying to get all of my MP3's and WAVs tagged in the same uniform way. I want to see if any of you know of a program that I can download that will do what I am looking for. I want all of my songs to be named as follows:?0 Tom Sawyer02 Red Barchetta03 YYZ04 Limelight?As you can see I want the songs to simply have the song number and title and that is it. Over the years I have ripped CDs before I really thought of ripping them in a uniform way and now I am having to spend countless hours doing it manually. Before I spend countless more hours perhaps someone here knows of a great program that will take my songs and tag them this way. I need it to cover both MP3 and WAV if possible. Thanks!

    Try mp3 Tag Studio at www.magnusbrading.com

  • Logic 7.1.1 and MIDEX8 USB MIDI Interface

    Anyone had experience using the Yamaha/Steinberg MIDEX8 USB MIDI Interface with Logic? I've just moved from the PC to Logic on the Mac and since I already own the MIDEX8 I wanted to check first to see that it worked well with Logic before trying to install it. I was advised by the store who sold me the Mac that this would work OK, but was also was advised to get the M-Audio MIDISport 8x8USB as a better choice.
    Thanks in advance.
    Peter Alexander

    You are very welcome. and welcome to the Mac family. I made the move this time last year and I am in heaven. its been like getting out of a ford fiesta and in to a Bentley!
    have fun with Logic and the G5.
    Ivan

  • Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

    Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

    If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

  • Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

    hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

    Friedrich sp wrote:
    Can you send me a mixer wich can do that, please ?
    Who do you think I am? Santa Claus?
    What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
    Roland UA 1010
    Focusrite Scarlett 18i8
    However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
    The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

  • Icons for both Logic 9.2.0. and 9.1.1.

    When I upgraded to Logic Pro 9.2.0., it created a new icon for 9.2.0., as opposed to updating the previous version of Logic. This left me with two Logic Pro icons. Now that I have upgraded to 9.1.1., my original Logic Pro is updated, and the Logic Pro 9.2.0. is still there.
    I assume I should just delete the 9.2.0., but why is the installer creating new icons.
    Does the 9.1.1. update include everything in 9.2.0.?
    Thanks in advance.

    You can edit posts up to about 20 minutes after you posted, mainly to correct errors etc.
    After that, the typos, bad grammer, incorrect info and "d'oh!" headslapping moments are sealed and locked in time for all to laugh at forever...
    So no, you can't edit old posts in this forum.

  • I have logic pro studio 8 and the upgrade, however it will not upload on my mac book pro. It says i need a product key for the logic 9 and it come with one.

    I have logic pro studio 8 and the upgrade (logic pro 9) and it will not load up to my new mac book pro.  Its asking for a product key for the logic pro 9 upgrade and there wasn't one in the box.  i need some help

    Contact AppleCare... Explain you are a Logic User and you should be transfered to a Product Specialist to assist you with your Issue.

  • Setting Quicktime as default mp3 and wav player

    Hello
    I know this is a pretty basic question, but how do I set Quicktime to be my defualt player for mp3 and wav files?
    If i select a wav file and then tick the "Always Open With" box it only does it for that particular file and I can't find any related options within the program.
    any help will be very much appreciated.
    thank you

    Highlight a mp3 with the mouse, then get info from the finder. (Right click or click+control key.) A window will open up with the mp3 info. Scroll down to where it says, "Open with:." Click on the tab to pick an application to open the mp3 with. If Quicktime doesn't show up in the drop down menu, pick OTHER at the bottom of the menu. The Application window (folder) should open up, if not, navigate to you Application folder. Scroll down to Quicktime and pick for the application to open the mp3 with. Done. Do the same with a wav file.
    Best bet is to click on CHANGE ALL in the info window. This will change all mp3s and wavs file to open with Quicktime.

  • Script logic: differences between MS and NW?

    Hi to all,
    at last SAP Tech Ed I've bought a book on SAP BPC 7, Netweaver version...I did it because I'm already working with the MS version, but I hoped to get a better vision on BPC over NW, and to understand some critical subjects.
    One question that I've been wondering is this one: I've found that some script logic examples that I've been able to reuse even in the MS version of BPC, while other won't. For example, I've found the *RUN_ALLOCATION (which I couldn't find in the logic assistent helper installed), and used it happily , and at the same time, I've found the *RUN_PROGRAM, which I don't really get any help from the web. I've found some posts in the NW version, not in the MS.
    So: is there any kind of document about the differences between scripting logic for MS and NW?
    Thank you
    Daniele

    Between 7.0 M and 7.0 NW we have a document with differences.
    But after that new SP or release was bringing new functionalities into NW.
    So it is depending what versions you will compare.
    Any way you will find key words into NW which are not into M version and oposite.
    So my suggestion will be to check the help documentation for version of NW used and to use the key words existing into that version.
    Principle of script logic is the same.
    Regards
    Sorin Radulescu

  • Correct binding order in a Cluster with logical switches, NIC teams, and vNICs on the host.

    I have seen many recommendations to set the network binding order on you Hyper-V hosts to something similar to:
    Management NIC
    Cluster NICs
    iSCSI NICS
    However, all of  these recommendations are for scenarios where the NICs are all physical NICs in the host.
    Using Server 2012 R2, I am building converged networks with logical switches, NIC Teams, and vNICs on the host.  So when I go set the network binding order, I now have all these components to deal with as well.  For example, on a 4 adapter blade,
    I might typically have the following items in the binding order drop-down.
    4 - physical NICs (2- teamed for the 1 virtual switch, the other 2 used for iSCSI)
    1 - Team interface (Datacenter_Switch)
    5 - vNICs (Management, Cluster, LiveMigration, iSCSI-1, iSCSI-2)
    So, should you only worry about order of the vNICS (placed at the top) and let the other components just fall to the bottom of the list?  This seems to be likely to me, since the binding order applies to service access to the resources, and the other
    components are not being directly accessed by network services?
    Or, should the order start out with the physical resources needed to access the vNICs, followed by any intermediate resources (switches or team interfaces, then the vNICS themselves, to ensure that the resources are available to the subcompnents accessing
    them?
    Any help would be appreciated.
    Thanks.
    -Tim Reid

    If by 'network binding order' you mean the order set in the Advanced Settings of the Network Connections of the Control Panel, then the most important one is to make sure the domain network is at the top of the list.  Whichever network is at the top
    of the list is used first for auth functions.  So auth functions perform best when the proper network is placed first in the binding order.  After that, I don't know that it makes much difference at all.  (If it does, I'm sure my statement will
    start a lively discussion. <grin>)
    . : | : . : | : . tim

  • Basic tcl and wav files required in VG for a stanalone cvp architecture

    hy all
    I am very new to this field and still learning can someone help me gain knowledge on this subject my question is
    What are the files needed in VG for supporting a standalone CVP architecture  ?   (in specific the VXML,tcl and wav files ??
    What are the use of the following services run in an ICM router ?
      rtsvr, dbagent, testsync, router, ccagent, mdsproc
    What are the use of the following services run in an ICM logger ?
      configlogger, csfs, listlogger, recovery, replication

    A stand-alone CVP VXML solution does not need ICM at all. You simply set up the services on the gateway
    service CVPSelfService flash:CVPSelfServiceBootstrap.vxml
    service helloworld flash:CVPSelfService.tcl
      param CVPSelfService-port 7000
      param CVPSelfService-app HelloWorld             <<<<<<<< whatever the VXML app is called
      paramspace english location flash
      param CVPPrimaryVXMLServer 164.103.128.20 <<<<<<<< primary VXML server
      param CVPBackupVXMLServer 172.20.142.20   <<<<<<<< backup VXML server
    I usually also install
      service cvperror flash:cvperror.tcl
      service ringtone flash:ringtone.tcl
    as well.
    Regards,
    Geoff

  • Alert: Logical disk transfer (reads and writes) latency is too high Resolution state

    Hi 
    We are getting following errors for my 2 virtual servers. We are getting this alert continuously. My setup Windows 2008 R2 SP1 2 node Hyper V cluster. Which is hosted 7 guest OS out of am facing this problem with to guest os. Once this alert started
    my backup running slow.  
    Alert: Logical disk transfer (reads and writes) latency  is too high
    Source: E:
    Path: Servername.domain.com
    Last modified by: System
    Last modified time: 4/23/2013 4:15:47 PM Alert description: The threshold for the Logical Disk\Avg. Disk sec/Transfer performance counter has been exceeded.
    Alert view link: "http://server/OperationsManager?DisplayMode=Pivot&AlertID=%7bca891ba3-e9f2-421f-9994-7b4d6e867b33%7d"
    Notification subscription ID generating this message: {F71E01AF-0BE6-8377-7BE5-5CB6F5C037A1}
    Reagrds
    Mahesh

    Hi,
    Please see if following helps
    Disk transfer (reads and writes) latency is too high
    The
    threshold for the Logical Disk\Avg. Disk sec/Transfer performance counter has been exceeded
    If they are of no help, try asking this question in Operations Manager - General forum since alerts are generated by SCOM.
    Regards, Santosh
    I do not represent the organisation I work for, all the opinions expressed here are my own.
    This posting is provided AS IS with no warranties or guarantees and confers no rights.

Maybe you are looking for