Logic 7 fades click

OK, I recorded on LP7 and edited some A Capello tracks and used fades in various places. Later updated the track/mix onto LP8, then Bounced the tracks and then Normalized on Waveburner 1.5. Am finding that often there is a click when playing through Waveburner where the fade would be, but it doesn't appear on the Arrange track in LP8. Any ideas what might be happening here?

Maybe your "bouncing" method wasn't right? Did you use the Bounce menue to bounce your tracks or the convert/copy function from the Bin (which will ignore fades and Plug Ins applied to these tracks/regions), Why do you normalize in Waveburner after all? You can do that in the Bounce menue as well. Why do you normalize at all, especially on a cappella material??

Similar Messages

Ipod nano connector logic board click wheel

could you pls tell me the name/model of the ipod latch connector which
connect the logic board to the click wheel ribbon?for IPOD nano 2nd
i need to find it end solder it to the logic board
tks
s

maybe ipod nano connector fpc??
does anyone know where i can buy it??
tks
ciao
s

How can I get my metronome click to work with 12/8 meter in Logic?

I'm trying to get my KlopGeist click to 12/8 music.
I can get it work with 4/4 and click on divisions set to 12th, but I cannot get truely 12/8.
It's ok to recore, but the notation is different.
Can anyone give me an answer?
Thank you.

You can try some workaround like this...
Create an Arrange track for the Klopfgeist (instrument 256). Create a new (one bar) region and draw 4 dotted notes using pitch say G5. Select the region and set ins "Loop" parameter to ON in the track inspector. Done.
When you need Click you can Mute/Unmute the Klopfgeist track instead of tweaking the Click button in the Transport.
Another scenario can be done using the Environment click object and building a small Environment tool which can work with the Logic transport click etc.
A.G
www.audiogrocery.com
Author of: Logic GUI Deluxe (Free),
Vox De Bulgaria - s.a.g.e vocal pack for RMX,
Logic Snapshot Console,
RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

Logical system on QAS after remote client copy from PRD to QAS

I wander after remote client copy from PRD to QAS do I have to change Logical system on QAS. Do I have to run some postprocessing program?
Thank you in advance

Hi Branko,
After the system copy, go to transaction SALE -> Sending and receiving Systems -> Logical systems -> Define Logical System , click New Entries and create a new logical system for your QAS; then go to SALE -> Sending and receiving Systems -> Logical systems -> Assign Client to Logical System, click on the client, click change and assign the new Logical system.
Other activities, check Jobs, RFC's, etc...
Regards
Juan
Please reward with points if helpful

Aggregation rule ignored for Logical sources

Hi,
We are using materialized views as logical sources for our logical tables. These logical sources contain aggregated data at higher level for dimensions. However, we have a logical source at the most detailed level for the dimensions.
Problem: We OBIEE hits the correct logical source based on dimensions selected in answers, it does not apply the default aggregation rule.
For instance, if a measure has aggregation as AVG, then when the logical sources corresponding to aggregated tables are queried, OBIEE does not apply AVG function. However, it does apply the aggregation rule when it uses the logical source at the most detailed level.
I have specified the aggregation content properly for every dimension.
Any pointers to debug the issue will be helpful.
Thanks,

Click on LTS of Table - Column Mapping - Select the logical column - click on expression - Put your logic here. You will get Aggregation rule is enalbed for the column.
Why ? -- Reason could be nested aggregation is not allowed. Aggregation on the normal column applied during query generation at run time. If you use that Agg.Measure to derive another Agg.measure server could not recognize it during runtime.

Logic on Mac OS X Lion - dragging regions switches workspace - HELP!

Every attempt to drag audio regions towards the right of the screen is switching to a blank workspace when the dragging cursor touches the screen boundary. My operation thus fails (of course) and I have to go back to Logic by clicking the icon in the dock.
I have turned everything off in Mission Control - but there is nothing at all that implies you can turn off dragging to new workspaces at the screen boundaries. I don't even know what to call these workspaces now that "Spaces" doesn't exist. This curious rebrand as "Mission Control" leaves me wondering what exactly it is?
All I can do is describe the steps to replicate this:
1. Open a Logic project with some audio regions in it
2. Make sure the right hand panels are all closed.
3. Drag a region right quite far - so your dragging hand cursor is against the window boundary
4. Boom! After a couple of seconds of dragging, you're in a blank workspace.
Anyway, if anyone has any ideas, I'd be pleased to hear them as this is driving me NUTS - trying to make a record here and its happening far too often.

Actually, I've just discovered that you can stop this happening by going into fullscreen mode in Logic. Still, it would be nice to be able to stop it happening without fullscreen mode if anyone knows how to turn it off completely.

Setting up an audio interface with logic 9

hey im still pretty new to this. i have a powerbook G4 with logic pro 9. i just got a steinberg CI1 usb audio interface which i was told would work with logic. (http://www.steinberg.net/en/products/hardware/ci1/ci1_start.html) im recording vocals and im having trouble with logic picking up any audio. ive installed the drivers and my mac has no problem discovering the interface. i went into logic and it intilized the core audio, and then i went to "prefrences" and set the audio input/output to the interface. i can hear myself with the headphones i connect to the interface and i can also hear the instrumental music coming from logic. The problem is logic wont pick up any of my vocals. I set the track to record enable and i still have nothing. Any help? Thanks!
oh and i tried it with garageband and it worked fine, so im pretty sure it has to do something with the setting on logic. any help would be appreciated!

Hey bud i was able to sort it quite easily in the end!
Ensure u have latest drivers installed!
Restart your mac! Ensure interface is plugged in
Load logic!
Click the + to add a new track:- select audio instrument!
Enable record and monitoring! Choose the channel you want to record from!
You may have to select your interface as your output if monitors are being used through the interface!
Hey presto!

How do I import my Final Cut Pro 10 (FCPX) XML files into Logic 9?

I am using 10.0.5. Which is the latest version Of Final Cut Pro X. I export my project out as a XML in FCPX. Then went into Logic 9 clicked on import then selected XML how ever the XML file was grey and Logic wouldn't come up as a valid XML to import. Please help me! Thanks

AFAIK Logic 9 can't import the form of XML that FCP X outputs.
There may be other ways to bridge the gap, but since I don't use Logic 9 I can't help further.

Creating CDs in Logic with proper volume levels

I took some songs off of both audio tape and CD, and combined them into 1 compilation. I originally recorded the audio tapes into logic, then bounced them as AAC files. Then I brought those AAC files, plus songs from commercial CDs into iTunes and burned everything to a CD. However, all the volume levels were mismatched....the more I read about iTunes the more it sounds like the program does not do a good job at evening out all the volumes. Is it possible to use Logic to do this, and even burn the CD within Logic...I assume Logic would have this capability based upon it sophistication, Im just not sure how to do it. Thanks!

Also, is there any way to measure the level of each track within Logic
double click on the region to open it in the Sample editor window.
There under Functions select Change gain...Search maximum
Have you tried using Waveburner?
Also check out:
http://en.wikipedia.org/wiki/Audio_normalization
http://en.wikipedia.org/wiki/Replay_Gain

Setting the record straight for setting recording levels in Logic

Hey everyone,
I asked a similar question a while back and got some great feedback, but I'm still a little confused about how to set a perfect recording level and work with the fader in Logic. A lot of what I've been doing has been trial and error and I would like to ask a few more specific questions:
I record with a MOTU traveler and have recently, for example, been recording direct with my guitar into the MOTU inputs. I am using "pre-fader metering", which is checked, and I using "software monitoring", which is also checked. When I am watching the fader, what should I be looking for? I always have the fader set at 0.0db. How do I set the perfect level in this situation? Should the fader be hitting red as I record? How do I make sure I don't clip, and what should I be watching for overall? AND, is it all the same process when recording with microphones? I've heard Logic records at a low level with MOTU products, but what exaclty does this mean in terms of setting levels and watching the fader as I record? I have been recording a lot lately and have some good sounding tracks and some that are not so great and I think it has a lot to do with the topic of this post.
Thanks for the help and clarification.

the fader position in logic does nothing to affect the recording level. That is totally dependent on the gain setting on your MOTU. The logic fader merely allows you to adjust the level at which you listen to the material you are recording. If you set the gain correctly on your MOTU then you shouldn't see the logic audio object hit the red unless your logic fader is set higher than 0dB. If your logic fader is at 0, and you still see red, then your gain is set too high. Remember, digital distortion is not like analog distortion. Once you have recorded the signal and you are in playback mode, then things change somewhat. The internal headroom of logic allows individual channels to hit the red without causing audible distortion. You should definitely avoid hitting the red on your audio output objects though.
I haven't heard about low levels with MOTU stuff. My own 896 has three settings on the inputs - mic, line and fixed +4dB. If you have variable gain as well, then you should be able to get healthy gain. If your recording level is very low, then recording at 24bit will help a lot towards a more detailed recording, as 16 bit can get grainy if the recorded levels are low.

Aggregation tab disabled for fx logical columns

Hello, I am new to OBIEE. Can somebody please help me understand the folowing -
Query - While defining formula column in BMM whenver we use logical column as source why Aggregation Rule tab gets disable?
How can i apply aggregation rule for such columns at RPD. These columns are recognised by icon fx.
Please find attached screenshot to help understand my question.
[https://picasaweb.google.com/105903262683032369187/OBIEE?authkey=Gv1sRgCPW2qu2x8eKdjgE]
Any help is greatly appreciated.
Thanks
Edited by: 930542 on Jun 22, 2012 10:03 PM

Click on LTS of Table - Column Mapping - Select the logical column - click on expression - Put your logic here. You will get Aggregation rule is enalbed for the column.
Why ? -- Reason could be nested aggregation is not allowed. Aggregation on the normal column applied during query generation at run time. If you use that Agg.Measure to derive another Agg.measure server could not recognize it during runtime.

ALE: Logical system

Hi
I want to send IDOCS from SAP(client100) to a non-SAP system through an RFC port.
I created 2 logical systems.
100SAP : Sending system
NONSAP : Receiving system
Am i correct to say that i need to assign LS-NONSAP to client100. or should it be LS-100SAP ?
Message was edited by: Giovanni Baumann
Message was edited by: Giovanni Baumann

Hai
Check the following Setting
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Thanks & regards
Sreenivasulu P

How To Re-install Logic 9 On New MBA?

I am passing on my old MBP to my father and therefore want to re-install software on my new MBA when it arrives. However, Logic 9 is no longer available on the App Store only Logic X.
Clicking on Purchases under the Appstore shows Logic 9 on my current MBP but the link no longer works. Will it show an INSTALL option on the new MBA when it arrives and is configured so I can re-install Logic 9 or will I be forced into an upgrade I cannot justify right now?
Thanks

From here:
Download Photoshop Elements products | 9, 8, 7

Logic shows aqua dialogs and beachballs on file- open

Hey,
Hoping someone here has had this problem and might be able to help me. Today Logic Express (7.2.3) started displaying dialogs in the aqua theme, and beachballing (never recovering) when I try File->open.
I realise this sounds familiar to the issue here:
http://docs.info.apple.com/article.html?artnum=301838
But my machine is an intel Mac Mini, not a PPC in the article. I tried the procedure in the article still, but no luck.
Other than that, I've been through most it seems:
- Completely removing/reinstalling Logic by removing the application, application support folder and installation receipts.
- Updating Pro App support to 4.0 (it already was at that version, but worth a try)
- Completely removing/reinstalling Pro App support 4.0.
- Launching Logic without CoreAudio enabled (holding control).
- Launching Logic with just the built-in audio driver.
None of the above fixes the problem.
I also see the following line in console.log at the time the beachballing starts:
2007-05-25 14:46:46.248 Logic Express[3422] * -[NSView requiredWidth]: selector not recognized [self = 0x1d60c400]
Which I suspect is a message sent to the supposed Pro App-looking dialog but not received well by the aqua dialog.
Anyone have a clue? Any help would be greatly appreciated!
Intel Mac Mini Mac OS X (10.4.9)

I use Logic 7.2.3 on a iBook G4 and have this issue. I don't think that it's Intel related. I have the same exact output in my console.log (including other Logic Setup Assistant errors):
2007-05-27 11:37:25.396 Logic Setup Assistant[303] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0xcc07, name = 'Apple MIDI Client 303'
See /usr/include/servers/bootstrap_defs.h for the error codes.
2007-05-27 11:37:25.404 Logic Setup Assistant[303] CFLog (99): CFMessagePortCreateLocal(): failed to name Mach port (Apple MIDI Client 303)
2007-05-27 11:42:37.877 Logic Pro[308] * -[NSView requiredWidth]: selector not recognized [self = 0x12e5ada0]
May 27 11:42:42 ibook3 crashdump[315]: Logic Pro crashed
May 27 11:42:44 ibook3 crashdump[315]: crash report written to: /Users/paul/Library/Logs/CrashReporter/Logic Pro.crash.log
It's not interface related. I use a M-Audio FW-410 with the latest 1.8.2 driver. I even tried the previous version driver to no avail. But I've also unplugged the interface entirely and rebooted with the same results.
I can get this problem to happen by simply starting Logic and clicking on the record enable button for track 1. Instead of turning red, it spins the rainbow wheel for 3 seconds and then tells me it has crashed.
The problem also happened when trying to Insert Audio into track 1. Seems like it could be related to the Open dialog -- or maybe its related to disk space. I only have 4G free on my hard drive. This should be plenty, but even if it weren't should Logic crash like this? I have 1.5G of RAM so I'm sure it's not that.
I'm going to try removing some files next. Anyone else have any other ideas???? Anyone??? Are there more than two people with this issue? I didn't do anything special at all to make this start happening other than keeping up with all the latest updates of everything.
I'm tempted to do a complete uninstall-reinstall-reupdate. But you tried this already didn't you? -pc
iBook G4 Mac OS X (10.4.9) FW410 with 1.8.2 driver

Two fader movement problem

Hi,
New to Logic Express. I'm using it with a Mackie Universal Control Pro and I cannot get the 1st fader to move on the controller without the third fader also moving. Then in Logic the third channel is affected and never the first.
How do I get this to stop? I do not have this issue in Soundtrack Pro 2. The control works properly.
Thanks,
David Perry

Hi.
There are Three possibilities:
1. Look at your channel output...maybe your audio track 1 is feeding MIDI track three as well (strange things in Environment??)
Hook up a MIDI monitor object to your track 1, and look at the MIDI data coming out of that, then also look at what your transport MIDI data is telling you...is there only 1 channel of data when you move the Logic fader? or two? (1 and 3, or just ch1 of MIDI at the output???)
If this is not the case, and you KNOW you are only ouputting MIDI on ch.1 for the audio track 1 fader, then you need to look at the MIDI interface. What brand is it? Motu, Unitor? Sometimes the internal setups for these machines can get corrupted, so they patch themselves internally from ch1 to other channels/ ports. I used to see this most often in Motu MTP/AV units. Reset the unit. And then turn it back on. Does this solve it?
If NOT, I would then:
1. trash your controller setup (go to the controller setup, and delete the MCU you see there. DON'T RESCAN YET!!! Quit Logic. then:
2. trash your preferences, and then
3. restart computer, to be safe.
4.start up logic, and then re-scan for your MCU.
Did this fix it? If not let me know so I can think some more...
Cheers

Logic 7 fades click

Similar Messages

Maybe you are looking for