Logic 8.0.2 Will Not Convert My SF2 to EXS. Any suggestions? Please Help!
I have tried everything. I put the soundfonts (SF2) in /Library/Application Support/Logic/Sampler Instruments. I tried in both the user and the system libraries numerous times. AKAI discs convert fine to EXS but not SF2. The soundfonts play fine in GarageBand though but not Logic. I am using Logic Pro 8.0.2; please help me!
Message was edited by: iKenj
Message was edited by: iKenj
Bee Jay wrote:
What is the blahdy diffrence ~twixt the two path-pointing methods?
/Library/ is the library folder at the root of your hard drive
~/Library/ is the library folder in your user area (the tilde is a Unix shortcut which refers to your user home directory) - ie the full path would be /Users/yourusername/Library/
From my experience... either location works, in fact my root /Library/Application Support/Logic/Sampler Instruments folder is on a separate partition and I use an alias to the above location, seems to work just fine.
However, I would definitely tries Bee Jay's suggestion (User/Library...) as you have nothing to lose at this point.
pancenter-
Similar Messages
-
I have purchased an album but one track keeps crashing my laptop and will not download to my iTunes? Any suggestions or help. Thanks
Hi there jq221,
You may find the information in the article below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
-Griff W. -
When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??
I would understand it if you checked email on your Mac, and then those messages were not available on your iOS devices if you had the advanced account setting "remove copy from server after retrieving message:" set to immediately.
I looked through my iPhone settings and don't even see an option to tell my phone to pull the only copy of a message and delete it from the server.
Possibly there is another setting in Lion (I am running Snow Leopard still) that tells your Mac to only synchronize mail to your iOs devices and is not pulling mail directly from iCloud.
You could try disabling your current iCloud email account in Mac Mail, and adding a new one and just telling Mail it is a standard IMAP account (imap.mail.me.com incoming and smtp.mail.me.com outgoing).
I did that for Leopard to get my email even to work after MobileMe is cancelled and it seems to work fine with my iPhone.
If that doesn't work, you can delete that new email account and re-enable the temporarily disabled iCloud email account from above.
Hope this helps. -
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
i went to update my ipod touch and restore it. it was working fine and then when it it restarted itself it it stuck onone scren te same one when u first get it, it will not do anythig elts what do i do please help i whont my ipod touch back
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!
Does the person who gave it to you still have the receipt ? You can try contacting iTunes Support and see what they say (you will probably need to give them images of the front and back of the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
My app store will not show the update page. Any suggestions?
My app store app will not show the update page. Any suggestions?
You haven't told us which version of iOS you're running.
Anyway, is it restricted? Check Settings > General > Restrictions -
When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks
I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it. -
I movie will not open on my computer. Any suggestions?
I movie will not open on my computer. Any suggestions? I am trying to upload movies from a Sony Handycam.
What version of iMovie(click on iMovie in your applications folder and then Get Info, Command-I) are you using and what is your OS Version(About This Mac under the apple icon)?
-
results for my browser has prob with 1st inch and harf from new babbilon crap will not hipolink i can not sign in or register on any thing please help
has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
Please help me!!! -
My itunes will not open on my laptop I have windows 7
Remove SC Info.sidb file
(This applies to Win7 or Vista)
From the Start menu, click Computer.
In the Organize menu, click Folder and Search Options.
Click the View tab.
In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
Click OK.
Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
Restart the computer and open iTunes. -
IPod shows as camera and will not let me use as disk space. Please Help!!
Okay, so i know that this has probably been asked before, but every similar question i read was a little different from my specific problem. Maybe someone on here can help me. :)) *crosses fingers*
I've had my iPod Touch since summer, and I just got a new laptop for Christmas. So I want to transfer my iTunes over to my new computer, of course. I read the tutorial on Apple Support, but when I went to drag my Library over to my iPod, it was showing up in My Computer as a camera, and will not let me use it as disk space. I've also followed the steps to stop the automatic Camera pop-up when I plug in my iPod. Yes, my iPod is set up on manual, so disk use SHOULD be enabled, correct? I am positive that I also have the latest iTunes software. AND my USB ports are up to date.
Sorry for the overly-thorough problem description, but I have read too many of the similar posts, and I know all the usual suggestions. But seriously, any help is appreciated. Thanks guys.
-Happy New Year
Message was edited by: music_sedativeHi,
Welcome to Apple Discussions.
Sorry to say that you cannot use an iPod Touch as an "external" drive, unlike the "Classic" etc. which I believe have this feature.
To transfer your library you will have to back it up to disc(s), a different type of HD or use a network to send the files over.
Good luck,
Dud.
Message was edited by: Duddo -
I am really hoping that someone can help me resolve a serious issue with a new printer.
I have tried every diagnostic tool including the HP print & scan doctor and my printer still doesn't seem to connect to my laptop or print.
Although it does print test pages and reports and it also prints directly from my Android phone.
I purchased the printer from ebay and the printer installtion/driver disc was not included. The printer connected to my Sky network immediately, the blue light/dot was solid and it stated on the printer's display 'Connected - and the IP address/MAC details etc'..........
However, when I try to print from my laptop, it won't print - no error message, nothing so I can't figure out what the problem is.
I went to the HP website and d/loaded the driver for my operating system [Windows Vista 32 bit] and when that failed I tried the Basic HP printer driver and that failed also. I then un-installed and reinstalled the drivers & associated software again and also tried the 'add printer wizard' in Windows.
As a last resort, I disabled my firewall and anti-virus software [temporarily] to ensure that was not preventing my laptop from recognising the printer still no joy!
I have tried every workaround I can think of [and I am not particularly computer proficient] and I am truly out of options and ideas of how to get this to work. When I have finished installting the drivers sometimes a dialoge box pops up on the bottom right hand corner [where the icons are] saying 'HP Photosmart ready to use' but I go to print a document either microsoft word or directly from the internet and it still will not print.
This is getting extremely frustrating and annoying. I have spent hour upon hour trying everything I can think of, but it still won't work.
Please help find a solution. Thank you.Hello flammingstar,
Thank you for the information. At this point because the print will print from your Android phone, scans, and copies. This shows that the printer itself is not the issue.
The error messages 0x0000643 and 0x0000057, when do you get these errors? Are they on the printer, or the computer?
I would suggest trying to stop, and start the printer spooler. Please follow the steps below.
1. Click Start
2. Type "services" (without quotes) in the search field
3. Open Services
4. At bottom of the page click "Extended View"
5. Click in a service in the list,
6. Press the letter "P" on your keyboard
7. Search for Print Spooler
8. Right-click on it, and choose Properties
9. Select Automatic in the drop down box
10. In that Properties window you will see buttons for Start, and Stop, please click on Stop, and then click on Start.
Try printing again from your computer. Are you able to print a full page?
Looking forward to your response.
I worked on behalf of HP -
My Ipod touch ios version 6.1.3 will not allow me to connect to my wifi, Please help me!!
My ipod touch ios version 6.1.3 will not allow me to connect to my wifi. I tried rebooting my wifi router, refreshing my ipod, resseting the networks and manually logging into my wifi. Sometimes it will go through for a brief moment, but the wifi connection will ultimately disconnect. Each time i try to connect to my wifi afterwards a small pop up will say "Unable to join the network". Please help. it's really annoying and frustrating.
Thank you Carolyn Samit, but nothing is working.
I've restored my ipod both to a backup and back to factory. I know the password is correct,
the router is the newest version (and it's plugged in and on), my ipod is updated, i've turned my wifi settings on and off, i've turned the ipod off and on. No luck yet. I've been working on it for hours now. About ready to sleep on it...maybe some luck will find me tomorrow...
Still in need of dire help. -
I tried to update the facebook app and it froze up and will not let me delete ...any suggestions??
i need help uninstalling and reinstalling the facebook app it froze and will not let me delete
Close Frozen app
Hold sleep button until ON/OFF slider appears. Let go of sleep button and ignore slider and hold home button until the app closes
Maybe you are looking for
-
Email notifications, email notifications
my email preferences are all set to NO but I still get emails alerts for every update to a thread I posted in. Anyone any suggestions? Apple tech can you assist? thx Russell
-
Synching problems with pages and numbers
After an initial problem with synching which was resolved with Yosemite Pages and Numbers have been synching across all my devices for a couple of weeks and now all of a sudden they have stopped again!! They synch across my phones and iPad but not to
-
Create materialized view from Designer9i
Is there a way to create a materialized view from Oracle Designer 9i that will that have a header that look like this : CREATE MATERIALIZED VIEW XXXXXXXXX REFRESH COMPLETE ON DEMAND WITH PRIMARY KEY Instead of this : CREATE MATERIALIZED VIEW XXXXXXXX
-
hi, Can anyon tell where internal excise invoice no. range defined. Actually in my case for three GRN posted with same excise group it is showing same excise internal no for all 3 GRN.. Thanx and regards, SAGAR
-
Dropping business key from existing dimension
A business key needs to be removed from an existing dimension in a data warehouse. I couldnt locate any documentation regarding this topic, so please let me know of any links to documentation if you know of any. Im needing to know if this can be done