Logic 8 & 02R

I have he chance to get hold of a Yamaha 02R V2 not the 02R96
Is it possible to set this up with Logic 8 as a control surface
If so how is it done?

Ok i now have the 02R so how do i connect it to my G5
I can connect via Adat Optical Or spdf or even good old Midi & control it that way
if anyone has a environment template that would save an awfull lot of time & ballache
Sound wise i can connect the spidf & use the monitor outs to connect to my monitor speakers

Similar Messages

Yamaha Promix 01 & logic 8

Hi
Ok i'm thinking about getting my hands on a Yamaha Promix 01
Does anyone know if this can be set up via midi with Logic 8
I know it wont be a case of plug n play & i'll probably have to tinker with the settings learn controller ETC thats not a problem
I just need to know it is possible
it must be easier than setting up an 02R v1 or is it ?
Thanx

Wow, a Pro Mix 01.... I used to use one of these in a live setup years ago (with Logic 2). I remember building my own elaborate environment that controlled everything in a live band scenario. It was awesome at the time... running it with a MOTU midi express and my faithful Powerbook 520, with expanded 20 meg of RAM and 160 meg HD.
Had all the vocals and their effects all midi controlled and set up from Logic. This is before laptops could really do the audio thing.
I'd sure do it different now if I were doin' the gig thing.

Original 02R and control surface

Dear Logic Users,
This is a brilliant forum! I've always been amazed by the knowledge of everyone out there.
This time, I have a really tricky problem to solve.
I've obtained a Yamaha 02R and I wish to use it as a control surface in Logic. Although it's not directly supported, I've read you can use the learn features of Logic to connect via midi.
I also have a MOTU Midi Express XT.
When I select menu Apple Pro Logic --> Preferences --> Control Surfaces --> Learn parameter 'no parameter selected' or 'controller assignments' and learn
The motu midi express seems to beam the synchronisation tick without giving me chance to move a fader on my 02R.
Does anyone know how I can disable this feature in my MOTU.
Or - does anyone know how i can setup a port and parameter I can learn.
I know I've got a long way to go, but any help here would be amazing.
Kind regards,
Andrew

Currently, my settings in the Yam 02R are as follows:
Currently, my 02R settings are as follows:
SETUP button --> 3/4
Transmit Key Remote - selected
MIDI Warning OFF - unselected
Insert Tx Bulk Wait - selected
SETUP button --> 4/4
Touch sense select- selected
Tx 02R Link Message - selected
Rx 02R Link Message - selected
MIDI button --> 1/5
Receive Channel: 1
Enable
Prgoram Change
Parameter Chg.
Control Change
Transmit Channel: 1
Enable
Program Change
Parameter Chg.
Omni
Program Change
Echo
Program Change - unselected
Maybe I need to link these to the transmit and receive in Logic? would anyone know how to do this?
Thanks
Andy

Logical GR in Third Party Process

Hi Friends
There is logical GR involved in third party process. What if we do not want to trigger it?

very useful thraed for your Qn-
[stock not updating after doing MIGO (gr) for third party sales |stock not updating after doing MIGO (gr) for third party sales;
BR
Raj

Logical databse in repeat

Hi
I call in loop logical database by FM LDB_PROCESS in different parameters but only first step is return ok
next return error subrc = 1 LDB_NOT_REENTRANT
How to init this calling in second step?

Hi
Firstly why you are calling the LDB using FM instead mentioned that in Program attributes and call that using GET statement ?
Regards,
Sreeram

Logical command in ABAP.....Urgent

Hi,
i am pretty new using ABAP program so i neeed help urgently. i am trying to move a file on the application server from one directory to the other and i was using the open dataset function to do that. but the file i am trying to move is pretty big and because i am using internal table to store, it is causing problems with the space.
i have consulted the basis guys and they have managed to create a logical file for copying from one directory to the other on the application server. to help you furthter. i am enclosing the mail sent to me.
I have created a logical command which should copy the file from one location to the other but you need to pass it the source dir and file name and the destination dir and file name.
The logical command is ZCOPY and uses cmd /c copy
Copies one or more files to another location.
COPY [/V] [/N] [/Y | /-Y] [/Z] [/A | /B ] source [/A | /B]
     [+ source [/A | /B] [+ ...]] [destination [/A | /B]]
source       Specifies the file or files to be copied.
/A           Indicates an ASCII text file.
/B           Indicates a binary file.
destination Specifies the directory and/or filename for the new file(s).
/V           Verifies that new files are written correctly.
/N           Uses short filename, if available, when copying a file with a
               non-8dot3 name.
/Y           Suppresses prompting to confirm you want to overwrite an
               existing destination file.
/-Y          Causes prompting to confirm you want to overwrite an
               existing destination file.
/Z           Copies networked files in restartable mode.
The switch /Y may be preset in the COPYCMD environment variable.
This may be overridden with /-Y on the command line. Default is
to prompt on overwrites unless COPY command is being executed from
within a batch script.
the problem now is i have no idea about how to use the logical command. can any one help me.
Thank you,
Ravi.

If memory is not an issue, then there should be no reason why this should not work.
report zrich_0001.
parameters: d1 type localfile default '/usr/sap/TST/SYS/Data1.txt',
            d2 type localfile default '/usr/sap/TST/SYS/Data2.txt'.
data: itab type table of string with header line.
start-of-selection.
* Read old file
open dataset d1 for input in text mode.
if sy-subrc = 0.
    do.
      read dataset d1 into itab.
      if sy-subrc <> 0.
        exit.
      endif.
      append itab.
    enddo.
endif.
close dataset d1.
* Write to new file
open dataset d2 for output in text mode.
loop at itab.
    transfer itab to d2.
endloop.
close dataset d2.
* Delete the old file
delete dataset d1.
Regards,
Rich Heilman

Logical Level in Content Tab

Hi,
What is the use of Logical Level under Content Tab in Logical Table Source?
Need more information, docs related to this
Thanks,
Satheesh

Hi
This logical level is useful for level bases metrics.It shows the levels in your hierarchy.We can give the level in this and in the report it shows the data for that level only.
See this lnk, http://gerardnico.com/wiki/dat/obiee/measure_level_based
Thanks
Don

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Logical Database in Abap Objects

Hi to All
I want do it a program report using a Logical Database.
Is this possible ??? But when I make a GET <node>, occurs the following error:
         "" Statement "ENDMETHOD" missing. ""
I'm doing the following:
CLASS MONFIN IMPLEMENTATION.
       METHOD TRAER_DATOS.
               GET VBRK.
       ENDMETHOD.
ENDCLASS.
Please, somebody tell me how I use the logical database in Abap Objects.
Thank you very much
Regards
Dario R.

Hi there
Logical databases whilst of "some use" are not really part of OO.
If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc) then there is still some limited life in this stuff but for OO try and solve it by another method.
If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
You can't issue a GET command directly in a method.
Cheers
Jimbo

Logical level in Fact tables - best practice

Hi all,
I am currently working on a complex OBIEE project/solution where I am going straight to the production tables, so the fact (and dimension) tables are pretty complex since I am using more sources in the logical tables to increase performance. Anyway, what I am many times struggling with is the Logical Levels (in Content tab) where the level of each dimension is to be set. In a star schema (one-to-many) this is pretty straight forward and easy to set up, but when the Business Model (and physical model) gets more complex I sometimes struggle with the aggregates - to get them work/appear with different dimensions. (Using the menu "More" - "Get levels" does not allways give the best solution......far from). I have some combinations of left- and right outer join as well, making it even more complicated for the BI server.
For instance - I have about 10-12 different dimensions - should all of them allways be connected to each fact table? Either on Detail or Total level. I can see the use of the logical levels when using aggregate fact tables (on quarter, month etc.), but is it better just to skip the logical level setup when no aggregate tables are used? Sometimes it seems like that is the easiest approach...
Does anyone have a best practice concerning this issue? I have googled for this but I haven't found anything good yet. Any ideas/articles are highly appreciated.

Hi User,
For instance - I have about 10-12 different dimensions - should all of them always be connected to each fact table? Either on Detail or Total level.It not necessary to connect to all dimensions completely based on the report that you are creating ,but as a best practice we should maintain all at Detail level only,when you are mentioning any join conditions in physical layer
for example for the sales table if u want to report at ProductDimension.ProductnameLevel then u should use detail level else total level(at Product,employee level)
Get Levels. (Available only for fact tables) Changes aggregation content. If joins do not exist between fact table sources and dimension table sources (for example, if the same physical table is in both sources), the aggregation content determined by the administration tool will not include the aggregation content of this dimension.
Source admin guide(get level definition)
thanks,
Saichand.v

Logical System in IDOC-XI scenario

Hi,
I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No. 2) Logical System.
my questions are
a) Are we use Logical System in B to B scenario ?
b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
Thanks and Regards
Mahesh.

Hay Kumar,
Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
Have a Good One,
Uri Lifshitz.

Logical Profiles in ISE 1.2.1

I´m having trouble understanding the Logical Profiles.
What I understand from the user guide: http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html#58510
for those to lazy to read:
You can use the logical profile in an authorization policy condition to help create an overall network access policy for a category of profiles. You can create a simple condition for authorization, which can be included in the authorization rule. The attribute-value pair that you can use in the authorization condition is the logical profile (attribute) and the name of the logical profile (value), which can be found in the EndPoints systems dictionary.
so I thought that meant that I can group Different Profiles (Apple Iphone, Ipad, Ipod) together into a logical group e.g. "BYOD_Idevice" and use this logical profile in the Authorization.
But I can´t choose this freshly created Logical Group in the Authorization Condition. As for the fact, I can´t choose this logical group ANYWHERE.
Leaning back and thinking about it - it somehow makes sense. In the Authorization, you don´t pick Profiles, you choose Identity endpoints. So whats the point about the logical profiles? I was hoping to clean/lean up my authorization rules with them. But for what would I use them else?
Or is this a bug in ise 1.2.1? Not sure if I should call tac about this, or if I´m just not getting it :D
Thanks alot for your help!

Nice username! :)
So yes, you are correct, the logical profiles would allow you to group different type of dynamically profiled devices and then reference that profile in your authorization rules. However, you won't see those logical profiles under the "Identity Group Details" section. You will need to leave that field blank. Instead, you need to look in the "second" condition box: expression > Endpoint > LogicalProfile
Hope this helps!
Thank you for rating helpful posts!

Logical Database in Webdynpro

Hello,
I have a program in R/3 that is based on a logical database. I don't want to have to write the program all over again in Webdynpro.
Is there a way to use the logical database in Webdynpro for ABAP.

Basically WDA calls a FM and then the following help is a good starting point:
"Calling a Logical Database Using a Function Module"
http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
Kindly close the thread and award appropriate a points to the answer given.
Sergio

Logical AND in MDX Reporting Services Parameter

Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral

Logical database in adhoc query

Hello All,
Can anyone tell me what is the logical database in adhoc query?

Hi
When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
Infosets are created from Transaction SQ02.
There can be four methods through which an Infoset can become a source of data:
1. Table join ( By joining two or more tables from Data dictionary)
example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
Custom Logical DBs can be created in T_Code SE-36.
4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
Reward Points, if helpful.
Regards
Waseem Imran

Logic 8 & 02R

Similar Messages

Maybe you are looking for