Logic 8 and mbox audio out problem
Hi
I have a problem when using my digidesign mbox with logic 8. When I set the core audio to Device: Digidesign HW (Mbox) in prefs in logic I can record with my mic (i see that the audio is going in) but I do not get any sound out, not from the tracks I have reWired from reason, or the mic. Its like the audio out is disabled when I choose the Mbox device. If I choose to use built in microphone or built in line in i can both hear the reWired sound and the internal mic in my imac, but then the external mic using the mbox does not work...
So basically I can record sound with the external mic, but then I dont here anything (not the audio in logic or the mic) or I can record with the internal mic and also here the other sounds (rewired or other tracks in logic).
This is really annoying, since I just want to be able to use my good external mic or guitar through my mbox and I cant...
btw, when using garageband it works wothout any problem to use the mbox, so its not a problem with the drivers or so...
Anyone have had similar problems, or maby someone has a solution. I would be really greatful.
Thanks
Mr Sinclair
Oh
and another thing... It also works in Sountrack pro as well as in garageband... It is only in Logic 8 I can not hear the sound I am playing once I have chosen the Digidesign device for input. It is almost as it automatically choses the digidesign device for output as well, and not the speakers on my computer... (in soundtrack pro there is a choice to chose input and output device, in logic only the input device... could this be the problem?) I could use soundtrack pro, but it does not have the ReWire function I need... and also I like logic better.
Any suggestions?
Similar Messages
-
Powerbook G4 17 audio out probleme
I have a problem when pull out the mini-jack headphone, the audio out port stay lit and I loose the sound from the internal speakers , and the output volume in the sound system preferences get locked, but when I connect the headphones back, everything come back to normal include the sound from the headphones.
there is separate sound board inside, could be sound board problem, loose cables or logic board problem.
-
SBlive Value and 2 audio out settin
Hi, Just a quick question. I want to be able to hook up 2. speakers to the front speaker out, and have the identical sound come out of the headphones I have hooked up to the rear speaker out. I had an old version of AudioHQ that allowed some option (Ibelieve it was 2 speaker legacy audio out or something like that) which allowed both the front speaker out and rear speaker out on my SBli've value card to have the same output sound. I just recently formatted and installed the new control panel, and I can't for the life of me find that option under the new version of audioHQ (.0) using windowsXP pro SP2.
All I want is a setup where I can listen to mp3s from anywhere in the house but then just turn the volume down on the speakers and play an online game through the headphones without climbing behind my computer to switch wires and without disturbing the wife. Any help would be much appreciated, or if someone has a better suggestion to my problem it would also help.Wheresjj
Did this soundcard come preinstalled in your Gateway computer? If so you will need to contact your computer manufacturer for support as the card may be OEM. OEM components are often modified from their retail standards and require special drivers that only the Vendor will have access to.
Jason -
Trouble running DVI video and HDMI audio out of 6950
Twin frozr iii 6950 2gb (X2 crossfire)
Asus VG236 Monitor
Windows 7
MSI P67A-G43 Motherboard
Yamaha RX-V371 Receiver
I have two Twin Frozr iii 2gb 6950 cards and am attempting to use the HDMI on the video card solely for 5.1 audio out to my receiver while using video through the DVI jack of the same card directly to my monitor without success.
-Audio functions if I run the HDMI from the card into my receiver, then out to my Asus VG236 monitor.
-Audio functions when I run from the card to my receiver then out to my plasma tv.
-Audio functions if I have the DVI run directly to the Asus VG236 monitor and HDMI to the receiver then plasma tv (only in dual display and the tv must be on for audio to function this way. If I turn the tv off even though the receiver is still on the audio stops working and windows sound lists the 'AMD HDMI Output' as not plugged in).
-Audio even fuctions when I run DVI to the monitor and HDMI to the receiver, then out to the HDMI port on the same monitor but the monitor will only run at 60hz this way even when DVI is selected on the monitor, as though it defaults to the HDMI when dvi and hdmi are both plugged into the monitor.
And if i run the hdmi to the receiver "HDMI IN" port without using the "HDMI OUT" port from the receiver to anything, like my tv or monitor, the sound doesn't work and in windows sound the "AMD HDMI Output" is listed as "not plugged in" .
I purchased this monitor for the true 120hz capabilities, the HDMI on this monitor doesn't support 120hz, the maximum is 60hz. DVI is required to run at 120hz. I don't see any option in windows sound settings or CCC to resolve this.
I have also tried disabling onboard audio in BIOS with no effect.
For now i'm running the audio out my MOBO jack through an optical cable to the receiver but optical only supports 2.1 sound.
Any suggestions you can offer would be appreciated, thank you
bump,
Anybody? -
Can anyone pleaes help as I have occured this problem today and sent hours trying to fix it and not had any luck !?!?
I always record in audio by press "R" on the channel strip but today for some odd reason the letter "P" shows up and no audio is audiable ?
Can anyone tell me what's going on ............!?!?
"When I try to record in some audio and press "R" it chnages to the letter "P" and no audio is coming through ?!?"This is because you have Punch on the fly enabled under Options (top menu)>Audio>Punch on the Fly.... signified by the letter P instead of the letter R
-
Optical digital and analog audio out
I just purchased a Pavilion 500-214 with IDT High Def Audio CODEC / DTS Sound+
Is it possible to get both opitcal digital audio out and analog (speakers/headphones) out at same time? Stereo amp needs access to both for multizone/source function. I can manually pick one or the other before playback - it is clunky in that when switching audio out devices the active will turn off but one switching to does not always turn on. But i really need both simultaneously active for amp to work properly. I have also found rear speaker jack to be more stubborn during switching than front headphone jack.
This question was solved.
View Solution.Hi zombi1,
Welcome to the HP Forums!
I have done some research on whether or not one can utilize both digital or analogue audio out at the same time, and unfortunately this is not possible.
Thank you for posting, and Happy Earth Day!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Bluetooth Headset and Headphone audio out at same time?
My GF and I were on our way to NYC on Acela and decided to watch a movie to kill time. I inadvertenly forgot to bring my headphone splitter, so I figured I could plug in one set of earphones into the headphone jack and use my bluetooth wirelessely. Upon doing so, the Mac Pro brand new, would only let me select one output via sound preferences. Any ideas or works arounds to allow audio out to both headphone jack and wireless? Is it possible to attach 2 bluetooth sets for wireless capabilities to watch movies?
Message was edited by: Special EducatorYeah I do it. I use a Jabra bluetooth adaptor that uses the headphone port. Then I tuck the luetooth unit under my Marware Relay wristband.
Motorola S9
Jabra A120s
Marware Sportsuit Relay
Nike + Ipod Sport kit -
Logic Pro and Mainstage Bombing Out
I have a copy of Logic Studio 9 installed on my Late 2011 MacBook Pro. Everthing except Logic Pro and Mainstage 2 launch and work perfectly. When I click on Logic Pro, it just bounces in the dock a few times and quits out with an error dialog. Mainstage 2 launches to the loading page and then stalls. I have tried deleting Logic Pro and Mainstage and reinstalling from my discs, they still don't work. The thing is after the first installation attempt, the installer does not ask me for the serial number anymore. What should I do? I really need to use Logic Pro.
Did you run "Software Update" to get the latest version?
-
Hey guys,
The audio on my Macbook is acting up. It only works when something is plugged into the audio out/headphone port (basically the onboard speakers won't work). When I press the mute key (F3) it just continually shows the audio icon with the bar at the bottom empty. If I look inside the headphone port, theres a red light shining.
Any help?
Cheers
JoeYou have a hardware issue that needs to be addressed. Either take it in for service or call Apple and have them pick it up via FedEx.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
An Apple User Group -
65x900b - two questions - amazon in dolby 5.1 and using audio out with subwoofer
Does the amazon app output 5.1 like netflix? I can't seem to find any way to set the amazon audio.Also I have used a 1/8 y adapter and plugged it into the audio out on the TV. One end of the Y goes to my A/V receiver and the other to the wireless transceiver for the subwoofer. The cable from the wireless transceiver to the tv is a mono cable so if i have them both plugged into the Y one of the channels cannot be heard. The subwoofer works fine. But when I change to audio out like I said I loose one channel. When I unplug the mini cable from the Y adapter however I get full stereo sound outputting. Is there anything I can do to resolve this conflict. Can I use a stereo mini cable for the wireless transceiver for the subwoofer.ThanksLloyd
Hi lgroveman,
Welcome to the Sony Community!
Amazon with Digital Dobly 5.1 is already supported. Please make sure to update your TV to the latest software, kindly check this link for further details and steps by steps procedures. In addition, please make sure to perform the steps below to Refresh the internet content of the TV once the installation is complete.
Press the HOME button, then select [Settings]
[Network] → [Refresh Internet Content].
The Analog Audio Out cannot drive both a stereo system and a Subwoofer. If you connect a Subwoofer to the TV SWF-BR100 the frequency response of the audio output is limited to the subwoofer frequencies.
To output 5.1 surround sound from your TV an ARC (HDMI ) or the Optical Out connection is needed because analog audio out support stereo sound.
If my post answers your question, please click the button below "Accept as Solution"
-
K8N Diamond Plus audio out problem
Hi,
I'm having an issue with the audio out on my K8N Diamond Plus. The rear audio out works fine when left jumpered. However when I connect the front panel audio connector to the mother board the volume of the rear audio out drops to an almost in audable level while the front panel audio works as expected.
At first I thought the rear audio had been completely disabled until I tried turning my speakers all the way up.
Is there a software issue here?
FYI I'm trying to use the front pannel audio connection on a Silverstone TJ07 case.hey - mikein_texas here - i have same board but with a Centurion case -
couple of things i ran into - maybe will spark some ideas
initally i hooked up front panel audio and got nothing
then i read on page 2-19 of manual that 5-6,9-20 have to be jumpered for rear audio to work
but that means no front audio which was a drag - but solved that prob with usb mike and headphones
apparently unless i am reading it wrong and someone please correct me if so, but you can have front audio OR rear audio
BUT not both
again look at page 2-19 in manual and specifically at text in grey box in middle of page
Yukon PXE 2.01 ( 20040406 )
Pre-boot Execution Environment PXE v.2.1
DLink Cable Modem - model DCM-202
ViewSonic VX2025WM 20.1" Widescreen TFT LCD - 1680x1050, 800:1, 8ms
MSI K8N Diamond Plus Socket 939 NVIDIA nForce4 SLI X16 ATX AMD
SAMSUNG Black 1.44MB 3.5" Internal Floppy Drive Model SFD321B/LBL1
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s
XFX Geforce 7600GT PV-T73G-UDD3 Video Card
SAMSUNG 16X DVD±R DVD Burner - 5X DVD-RAM Write and LightScribe Black ATA/ATAPI Model SH-S162L/BEBN
COOLER MASTER Centurion 532 RC-532-SKN1 Black Computer Case
AMD Opteron 165 Denmark 1000MHz HT 2 x 1MB L2 Cache Socket 939 Dual Core
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400
Seagate Barracuda 7200.9 ST3808110AS 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive
Ultra ULT31849 X-Finity 600W Power Supply
Cooler Master A12025-12CB-5BN-L1- 120 x 120 x 25mm 1200rpm, 43cfm, 22dBA, LED, 3-pin - front intake case fan
Scythe S-FLEX SFF21F 1,600rpm, 49.0CFM, 20.1dBA, 3-pin, 120mm S-FDB Bearing - rear exhaust case fan -
OK, I'm new to Logic. But I pretty much get it. I totally understand how the Logic Environment should be interfacing with BFD (all out), using audio objects (Aux) for the coresponding outs from BFD. Here's the thing...
When I try to select the input options for the Aux object from BFD all I get is "BFD (all out) 3-4" and no other options from BFD. Am I missing anything or is my BFD just being a jerk? Also, after updating and re-installing BFD and Logic the AU manager still won't pass BFD. Any thoughts? Thanks.
Dual 2.0 G5 Mac OS X (10.4.5) 1GB RamI thought this is what it's supposed to do. Send
channels 1-2 to the track, and the rest to the aux
objects (which would start w/ 3-4).
Yes, I understand this, however all subsequent tracks (not just the next sequential tracks) pull up as 3-4. No further outputs are given once 3-4 has been selected once. They all come up with 3-4 if stereo or 3 or 4 if mono. Nothing else. That's why I now suspect it's an issue for FXpansion to solve.
This isn't do or die for me. It's definitely more convenient that soloing each output in BFD one at a time and recording it to an audio track, but I can do that in the meantime. Thanks all for your input! -
Logic Pro and Basic Audio Units
Is anyone else having an issue with Logic Pro 9.1.8 and using legacy/basic audio unit effects located in the Audio Units > Apple location? It seems as though anytime I try to use an AU* type plugin with my project the EQ freezes like it did before the 9.1.8 update was applied. I've noticed the issue occuring when I have 8+ tracks with midi, samples, and Apple Loops in the project. The HD and CPU meters are very low (1-2 bars) and it just hangs. I don't think track count or track type has anything to do with this issue as my last project had ~24 tracks and did fine up until I added in AULowpass and that is when I started having problems with the EQ.
This is because you have Punch on the fly enabled under Options (top menu)>Audio>Punch on the Fly.... signified by the letter P instead of the letter R
-
845PE Max SPDIF AUDIO out problem
Hi there,
1. I've got 845PE Max MB; C1,7GHz; 256DDR; W98SE.
I haven't got "S" bracket (I can't buy one), but I want to use digital SPDIF out.
I connect CINCH socket to pin #3 of JSP1 [SPDIF out] connector. And I have sound output via it to my amplifier (I can hear proper sound (analog) from movies and windows sounds).
The problem is, that when I open "Sound manager" from system tray & I see "AC97 Audio Config" Window & I check SPEAKER CONFIG tab -> I can't see "ENABLE SPDIF OUTPUT" check box to choose digital output.
Funny thing is, that some time ago I had digital sound (dolby digital) when I played some movie, but now I don't have it on the same movie.
2. Neither I don't have MSI DVD application on CDROM attached to the MB. Can I download it from some place ? Maybe it can help to switch SPDIF on ?
Looking forward for advice,
Regards,
M@rekUnfortunatley i threw out my pc-speakers when i moved last but i could lend a pair to test. But i dont think it would change since i did put in a SB live sound card and put the same cord in that to the surround system and it worked perfeclty first try...
So my assumption here is that there is no error in the connection to the surround system but rather a error in the onboard ..if its a severd connection or a driver issue im cant tell.. but since i tested all driver as of 2 weeks ago i could possibly find. even went to c-medias homepage and downloaded thier latest drivers.. and no luck.. -
POV1 and AVI audio conversion problems
Hi, I have a POV1 helmet camera which records to SD card in AVI format.
I have used the suggestions here to convert the files to DV to edit in FCE4
I am also using a Sony handicam for additional footage which I import into FCE4 via firewire.
The problem I have is the audio formats are different and I have to render the POV1 clips to hear the audio.
I have used MPEG stream clip to make the 2 different media the same but I can't adjust the Audio format from 32-bit floating point (POV1) to 16-bit integer (Handycam)
Any thought on how to make the two types of audio the same so I don't have to render each time I make a change?
TIA..The bit size is not important, the sample rate. Are you converting in Streamclip to DV or to QuickTime? You need to convert to QuickTime and set the audio to uncompressed stereo 48K, assuming the audio on Handycam is also 48K. If it's 32K then set the audio in Streamclip to 32K.
Maybe you are looking for
-
i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???
-
Sizing a Scene7 flash component
Does anyone know how to size a flash component? I am using the BasicZoom and Flash Flyout Zoom. Both seem to have a ton of unnecessary whitespace around them. I've seen smaller examples, but I haven't been able to figure out how to size them as cq:in
-
The stock of component item cannot be negative
I'm having this strange problem with a number of work orders. I issue all of the components. All of them. If I bring up the issue window again, it's empty. I try to release and it gives the above error. I don't get it, if there wasn't enough sto
-
3rd LEVEL OF HELL (HELP!)
I have spent nearly three hours over the past two days trying to get this damn, corporate, soulless Flash Player 10 to work like a nice normal download. But after it appears to install the following message keeps vomiting up," Error: Active control f
-
Can i use my snowball usb mic with Logic or Pro Tools???
Can i use my snowball usb mic with Logic or Pro Tools???