Logic 8 bounce issue - anyone ever see this?

Whats up everyone? Has anyone ever experienced this issue before in Logic 8 pro?
I finished a track and bounced it then decided to move the session folder onto a external hard drive away from its original location ( my desktop) I decided later on to go back to that original session and make a change then rebounce the track. The session looked as if it was bouncing but then the final mp3 & wav where corrupt. I guess you can say I learned my lesson ( never move session folders)
Has anyone ever seen or experienced this before? Any suggestions would be greatly appreciated.

Hi,
Well, still the first thing that springs to mind is pilot error... you should set out to replicate this result, or at least from now on make sure you oversee and doublecheck every step of the process. Include the name or a unique acronym of the client or something to avoid having different files with identical names.
regards, Erik.

Similar Messages

Anyone ever see this problem before???

(AKA...welcome to bizarro world)
We picked up a 500MHz iBook (Snow, dual USB) from a recycler because he showed us photos of it's good screen and thought the unit would be good for parts. We were really expecting a piece of junk but when we received the unit we were surprised that it's almost in mint condition.
We turned the unit on and here's what happens:
1. White background with Apple logo shows up, no spinner. Sits like this for about a minute.
2. Suddenly Apple logo is replaced by a rectangle that looks like it has random colors in it.
3. About 20 seconds later, the spinner shows up, and then the system boots.
We thought something was wrong with the boot disk. We've seen a lot of school systems and companies mess with these systems by replacing the Apple logo with one of their own....cute trick if they do it right....if they do it wrong they hose the system. We booted off of a Firewire disk w/Tiger on it and the unit ran fine. Ran AHT on the unit and it passed with flying colors. We decided someone must have messed up the hard disk so we would proceed with a complete repartitioning of the HD and then an install of Panther.
Did the complete re-install of Panther. Unit worked great!!1! Proceeded to download ALL the updates for the unit. Suddenly, the system starts acting flakey.It's dropping internet connections, and can't complete downloads. We reboot. NOW the original problem re-appears (i.e. wierd boot w/scrambled logo). We suspect the disk is erratic and on its way out. We re-attempt the complete installation...once again, it works fine AFTER we do a CD based OS install, and yet once again after attempting software updates problems are re-introduced.
We've done updates on many 500MHz iBooks and completed Panther online software updates without a single problem. There's one catch, and this is the only thing I can think of that's different with this particular system: THIS UNIT HAS A COMBINED DVD-ROM/CD-ROM reader on it...not a CDROM or CD R/W.
Anyone else ever see a problem like this before?

OSX Fan:
Congratulations on the mint condition iBook G3.
I would first try re-installing 10.3.9 Combo Update. Remember to Repair Dis Permissions in Applications > Utilites > Disk Utility before and after installing.
I suspect that the HDD is failing or failed. As you may know, the Verified S.M.A.R.T Status reading is not as accurate as the Failing or Failed reading. This computer was introduced in May 2001 so it is well past the 3 to 5 years average life of an internal HDD. Download and run SMART Utility - 2.0.2 and see what that tells you. If the computer boots via firewire that seems to indicate that it works fine. If the issue is in the Panther upgrades, the Combo upgrader should resolve that issue.
Please let us know how the above recommendations work, if you try them.
cornelius

Anyone ever see this error when calling a dll? "Arbitrary.dll?"

Hey folks, I'm attaching a jpg of the error I get as soon as I try and load a vi whose subVIs call a "Call Library Function".
Double clicking on the call function I can verify that the 'Library name or path" is correct, and the Function name is what I want.
I do not understand why it is telling me I need "Arbitrary.dll" - the name of the lib is adwgc.dll as indicated in the path (that I verified).
Anyone deal with this error before? I'm pretty clueless at the moment, any help will be appreciatized and surely kudo'd!
thanks
-pat
edit- also, I'm using LV 2011
Solved!
Go to Solution.
Attachments:
error.jpg ‏18 KB

You get this error because adwgc.dll is internally loading Arbitrary.dll because whoever wrote adwgc.dll called some function in Arbitrary.dll. The only to fix this is to get Arbitrary.dll and put it in a folder that adwgc.dll can load it from. Putting it in the same folder as adwgc.dll should work.
Where did you get adwgc.dll from and are you sure they didn't supply Arbitrary.dll as well?

Anyone ever see this when connecting their phone to the PC

Sometimes it displays strange characters beside the name (today it's Japanese). Sometimes it just random characters (these may be random japanese characters, I don't know).
Image:

I get the same thing, and it seems to happen randomly. It most often happens I connect my iPhone and iTunes is not already open (I do not have it set to open iTunes for me or to auto-sync). But it doesn't seem to hinder the function of the iPhone at this point.

Anyone ever see this error

VM could not be created rc-6
What is happening is that the dispatcher starts and the server does not. The dev_server0 has no entries in it. What logs can I look at for help?
Thanks
Jeremy

Hi,
please, have also a look at the std_bootstrap.out, std_bootstrap_<serverID>.out, and possibly jvm_bootstrap.out and jvm_bootstrap_<serverID>.out. There should be some more info about the error in there.

Anyone ever see this syntax? What does it mean?

return class$com$bea$p13n$security$realm$RDBMSUser != null ? class$com$bea$p13n$security$realm$RDBMSUser : (class$com$bea$p13n$security$realm$RDBMSUser = class$("com.bea.p13n.security.realm.RDBMSUser"));
I know the shorthand if statement but what are all of the $'s?

More pertinent:
package playground;
public class Garbage
    public Class getAClass()
        return One.class != null ? One.class : Two.class;
class One
class Two
C:\source\Enboss_3\Playground\classes>javap -c -classpath . playground.Garbage
Compiled from Garbage.java
public class playground.Garbage extends java.lang.Object {
    static java.lang.Class class$playground$Two;
    static java.lang.Class class$playground$One;
    public playground.Garbage();
    public java.lang.Class getAClass();
    static java.lang.Class class$(java.lang.String);
Method playground.Garbage()
   0 aload_0
   1 invokespecial #6 <Method java.lang.Object()>
   4 return
Method java.lang.Class getAClass()
   0 getstatic #7 <Field java.lang.Class class$playground$One>
   3 ifnonnull 18
   6 ldc #8 <String "playground.One">
   8 invokestatic #9 <Method java.lang.Class class$(java.lang.String)>
11 dup
12 putstatic #7 <Field java.lang.Class class$playground$One>
15 goto 21
18 getstatic #7 <Field java.lang.Class class$playground$One>
21 ifnull 48
24 getstatic #10 <Field java.lang.Class class$playground$One>
27 ifnonnull 42
30 ldc #8 <String "playground.One">
32 invokestatic #9 <Method java.lang.Class class$(java.lang.String)>
35 dup
36 putstatic #10 <Field java.lang.Class class$playground$One>
39 goto 69
42 getstatic #10 <Field java.lang.Class class$playground$One>
45 goto 69
48 getstatic #11 <Field java.lang.Class class$playground$Two>
51 ifnonnull 66
54 ldc #12 <String "playground.Two">
56 invokestatic #9 <Method java.lang.Class class$(java.lang.String)>
59 dup
60 putstatic #11 <Field java.lang.Class class$playground$Two>
63 goto 69
66 getstatic #11 <Field java.lang.Class class$playground$Two>
69 areturn
Method java.lang.Class class$(java.lang.String)
   0 aload_0
   1 invokestatic #1 <Method java.lang.Class forName(java.lang.String)>
   4 areturn
   5 astore_1
   6 new #3 <Class java.lang.NoClassDefFoundError>
   9 dup
10 aload_1
11 invokevirtual #4 <Method java.lang.String getMessage()>
14 invokespecial #5 <Method java.lang.NoClassDefFoundError(java.lang.String)>
17 athrow
Exception table:
   from   to target type
     0     5     5   <Class java.lang.ClassNotFoundException>

HT4807 anyone ever get this message? "The application Logic Pro can't be opened - 1712"

anyone ever get this message? "The application Logic Pro can't be opened - 1712"

More information please...
What OS X are you running and what is the version of Logic...

Has anyone ever had this problem and know how to fix it!!! I upload songs on to my ipod and they appear on the ipod in iTunes but after I disconnect they are not on my ipod!

has anyone ever had this problem and know how to fix it ?? I upload songs on to my ipod and they appear on my ipod in itunes but after i disconnect (the correct way) the songs do not appear on my ipod. If i plug the ipod back into my computer it still shows them as being on my ipod through itunes but not when i disconnect please please please help!! thankyou! (Also the songs i'm trying to upload are cd's that i have brought)

See Grouping tracks into albums, in particular the section Missing Artist or Album not with others by same artist.
tt2

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT203200 has anyone ever had this problem? seems to be a problem in itunes, as i am having no problems downloading other files."There was a problem downloading "Outlander / Howard McCain". An unknown error occurred (-50)."

has anyone ever had this problem? seems to be a problem in itunes, as i am having no problems downloading other files."There was a problem downloading “Outlander / Howard McCain”. An unknown error occurred (-50)."
kinda suck to pay for something you cant use!..

Try fixing up the validation issues...
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
Not promising it will help, but it's worth a shot.

Has anyone ever seen this error

We just launched a vaccation tracking app with a coldfusion
front end and an access 97 backend (dont ask). The app was tested
for over a month and passed all tests. However we never tested for
volume, or amount of users hitting the app. On the backend, we have
an access table linked to a text file. Again, this tested out
perfectly over the past month. This morning after release to the
entire company of about 2,000 people, users began reporting this
error:
The text file specification 'EmployeeList Link
Specification6' does not exist. You cannot import, export, or link
using the specification.
Some users logged in to the app successfully and some
recieved this error. For those that recieved the error, we had them
back out and re-login and then the app worked just fine.
Has anyone ever seen this or have a guess as to what is going
on?

Hi,
The right way would be to use a "real" database server.
But you can test if db-caching can improve the issue.
With each <cfquery> you can set a cachedwithin
parameter. Using that should allow you to query the Access db once,
and then have CF keep the query results in memory (for the DB as
well as the text-file).
You could query the complete database with no filtering this
way, and then filter the data using QueryofQuery to output only
records for specific users/groups/regions.
You also need to make sure the settings in CF admin are
configured right for this.
The more often the database content is updated, the slower
this solution will get though.
cheers,
fober
ps. for the cachedwithin parameter in the query set a
timeframe of forever, so the recordset never gets updated, and then
actually execute a new query to update the recordset at the end of
your "save a vacation" or "updated a vacation" functions. This way
the app would only read the db when a real change to the records
occurred.
But like I said with 2000 users, even that may not be enough
to get the app performing.

Full screen playback in PE9 garbled - anyone else see this?

I mentioned this in a general post but I'll make it a specific question now -
When I click on the "full screen" button near the top right of the interface, full screen playback has a corrupted area which corresponds with where the timescale is on the normal interface. Sometimes the playback cursor "breaks through" as a black vertical line too.
Does anyone else see this?
I have the latest Nvidia drivers installed. Windows XP Pro SP3 Q9300 quad core PC 2GB memory.
Thanks for any observations.

It's very obvious if you do have the problem - a wide strip of the video (horizontal, matching the timescale hidden beneath the full screen display) gets shifted sideways somewhat (flickering on and off), so that any vertical object in the footage gets displaced sideways at that point in an obvious juddering fashion. I tried to do a screen grab but simply doing that makes the problem change - it is more evident when the footage is running than when frozen.
Anyway, adjusting the Windows Display Properties "hardware acceleration" slider, moving it to the left till it is set to the point where the message beneath reads "Disable all DirectDraw and Direct3D acceleraions. Use this setting to correct severe problems with DirectX accelerated applications" seems to fix the problem.
Graphics card is a GeForce 8600 GT, in case that's relevant.
At least I know how to work around the problem. Let's see if others come across the same problem in due course. Maybe it's just a local issue.

T420s parts delay...anyone else seeing this

We have a 1 month old t420s that had the mainboard die (wil not power on, power button just slow flashes) We where just told that Dec. 24th would be the earlest the parts depo would have the mainboard!! Anyone else seeing this type of delay? This is a laptop on a Next Day on site enterprise contract. Having a user down for that long is nuts.

hey djcam,
welcome to the forums and apologies for the inconvenience caused by this.
could you pm to me the following
Name:
Country:
Mobile:
Email:
MTM [machine type model]:
(To locate MTM - http://support.lenovo.com/en_US/FindProductNumber.page#find)
Serial Number (S/N):
Date of Purchase:
Case/Order Number : (if any)
Screenshot of Error(if applicable) : (upload it to a hosting site and paste the link here)
Location of unit : Home / Repair Center (delete where appropriate)
Description of issue :
Troubleshooting Taken : (if any)
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

All v8 files saved from Illustrator CC seem to be corrupt - anyone else see this?

Hi There,
I've tried searching for this but couldn't find anything. I'm trying to import an illustrator file into Cinema4D which requires me to save a v8 eps - but when I try to import, nothing happens.
At first I hought it was a C4D issue but if I:
Create a new Illustrator file in CC
Export v8 eps
Try to open the newly created v8 eps in Illustrator CC
Then I see the following error:
"Can't open the Illustration. The illustration contains an illegal operand. Offending operator: {eps_metadata_stream} Context: ZA"
I've tried the following steps to reproduce the issue on two different Macs (10.8.4 and 10.8.5) and see the same error each time:
Create a new blank file (print intent)
Create a text box and type some text
Convert all text to paths
Save as Illustrator v8
Does anyone else see this issue in Illustrator CC?
Any help would be appreciated.
Cheers
Ben

I'm having this same issue.
Sadly HDave387's fix doesn't work for me. I have Universal Type client instead.
What does seem to work though is "Save as Copy". For some reason that's perfectly fine, but "Save As" throws out an error when trying to reopen the v8 .eps.

Since loading IOS 7.0.4, the images and letters/words on my ipad Mini are fuzzy and less clear. It appears the revised IOS has created this degradation to clarity and sharpness. Anyone else seeing this problem?

My ipad mini display, including letters/words, was crystal clear until the last software upgrade. Now everything is fuzzy and less clear. I'm reading many complaints about this on the Internet forums. Since I read a lot of books on my ipad , this is particularly irritating. Anyone else seeing this issue?

Hi Fitz,
Welcome to the Support Communities!
I found adjusting the size, boldness and contrast settings on the iPad mini were very helpful.
Here is a link to the information in the iPad User Guide on page 112:
manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Large, bold, and high-contrast text
Display larger text in apps such as Calendar, Contacts, Mail, Messages, and Notes. Go to Settings > General > Accessibility > Larger Type, where you can turn on Larger Dynamic Type and adjust the font size.
Display bolder text for items on iPad. Go to Settings > General > Accessibility and turn on Bold Text.
Increase the contrast of text where possible. Go to Settings > General > Accessibility and turn on Increase Contrast.
I hope this information helps ....
Have a great day!
- Judy

Logic 8 bounce issue - anyone ever see this?

Similar Messages

Maybe you are looking for