Logic 8 to Logic 9 Issues

Hi all,
I am working on my final project for a beginning audio engineering class and I am having major issues.
I spent about three hours recording audio into Logic 8 (recorded in 48/24). I checked over the audio and it sounded great. I saved it to the desktop, threw it onto my USB drive, then left for home.
Now that I am home using Logic 9, all my audio is in the wrong place and many of my audio files come up with errors saying:
"Logic Pro found 11 audio files in 8 bit format. This format cannot be played back"
"One or multiple audio files changed in length! As a result 20 audio regions changed in length or content position."
"The file 'Part 1 Mark #__.aif' is not recognized by Logic Pro. Please ensure that the file properties are correct and that it is a supported file type.":
I have no idea what happened, so I closed Logic without saving and opened it again. Same thing.
Anybody have any idea what could have happened here? I am keeping my fingers crossed that I didn't lose my audio since there won't be time to rerecord it before the project is due.
Help!

hollig wrote:
"Logic Pro found 11 audio files in 8 bit format. This format cannot be played back"
"One or multiple audio files changed in length! As a result 20 audio regions changed in length or content position."
"The file 'Part 1 Mark #__.aif' is not recognized by Logic Pro. Please ensure that the file properties are correct and that it is a supported file type.":
I have an explanation for this and if it's what I think it is it's going to be ugly.
The # in a filename means you've saved a file using a name that exceeded the character limit of Logic 8, I've heard this bug was fixed in Logic 9.xx but have not tested it of have confirmation that it was indeed fixed.
Does the # have a number after it? If so, your files have been saved with a reference to the disk location (sector number) of the original drive they were saved to. Moving the files via another medium (flash drive) changes the location of the files so that they are no longer intact. What you're seeing is chopped up bits of files, some with no header information.. that's why they're seen a 8-bit raw audio files. Even though the files are intact, Logic is trying to read the sector number in the name and in doing so grabs whatever audio is located in the sectors listed.
Doesn't even have to be audio, if the text of the Magna Carta is located there Logic will try and load it as audio.
Everything will be fine once back on the school computer as long as you've left the original files in place. Now, if you haven't used long filenames my whole theory is shot and I'm the fool of the day. A position I'm not unfamiliar with.
pancenter-

Similar Messages

Logic Remote connectivity issues after updating to iOS 8 (solved!)

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Thanks very much! This solved my connection problem.

How to master audio file handling? Where is the logic of Logic?

1. How can I master where to save my logic project files including audio?
2. I want to save a project as a template WITHOUT the recorded track files. When I open the new template I dont want to have all old audio in my "media"browser inside Logic! How?
3. I have one old project with a lot of audio of which only a few are used, yet when I try the cleanup function only a few are erased. Why?
4. How to save a project so that ALL the files used are saved inside that project folder. In Protools and Cubase you can erase all material you dont use.
5. I want to have all my audio saved in ONE project folder but they end up scattered somewhere else, what to do?
I can never get used to the apple/logic sense of file structure. Crazy! Where is the logic of Logic? /Helpless to the logic of Logic 8

Hi
If I understand the problem correctly?
jrm1 wrote:
The possible issue concerns the start of the audio files.
I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct?
This can depend on how you did the "record down to a stereo file".
If you routed tracks to bus channels, then recorded the bus to another track, Logic will include the count-in in the audio file. As you say, the region in the Arrange will be correctly "trimmed".
One solution would be to convert these bounced regions to new audio files (Audio Menu), another to use Bounce Region (or track) in Place.
Alternatively, use a manually placed "2 pop" 2 seconds before the start of each cue.
CCT

Rename Logical Schema / Logical Agent

Hi,
is it possible to rename a logical schema / logical agent?
Thanks in advance & kr
Michael

Hi,
Yes it is possible to rename logical schema/agent in ODI topology .
While renaming you will get a warning saying this is used in work repository and if you rename you need to make sure all code/objects using this logical schema are pointing to the new name . Else you may find issue during execution.
It is not a good practice to change logical schema name.
Thanks,
Sutirtha

Usage of logical name, logical path name, physical name of a file

Hi all,
I have to write to a file on the application server. I had been given the logical name, logical path name and physical name. Suggest how to use these parameters and get the path where to store the file.
Thanks & Regards,
Kasinath.

Open Dataset
catch system-exceptions DATASET_CANT_OPEN = 8.
    open dataset UNIX_FILE for output in text mode encoding default.
endcatch.
Write to Dataset
loop at IT_STR into IS_STR.
    catch system-exceptions DATASET_NOT_OPEN = 0 .
      transfer IS_STR-STR to UNIX_FILE.
    endcatch.
endloop.
if SY-SUBRC eq 0.
    message S138(ZSM) with 'Data Downloaded to Unix File'.
endif.
Close Dataset
close dataset UNIX_FILE.
Regards
- Gopi

Logic Pro, Logic Studio and Logic Express

Can someone explain the difference between Logic Pro, Logic Studio and Logic Express?

Hi,
I don't think your friend is right on this. When you install Logic X, only the most essential part will be downloaded. After that you open Logic X, and from within the program you can download all the other content. Logic will look if you already have Logic 9 content on your harddisk, so it won't download files that are already present. So, after all is downloaded, all files are on your harddisk, just like Logic 9. By the way, Logic 9 will still be available after installing Logic X.
Whether you will experience crashes will be very hard to prodect, because these will be caused by unforeseen combinations of your computer, audio interfaces, maybe even other hardware, kernel extensions etcetera. If you wait for a couple of months, updates of Logic X will probably have less crashes. As said, on my computer it's just as solid as Logic 9.
Garittan will probably advise a fast harddisk to prevent complaints when people are pushing the plugin to the edge. I would expect that it's not a black/white story.
The AUMatrixreverb can be found in any audio plugin slot completely at the bottom: Audio Units > Apple > AUMatrixReverb.
About the Epiano: in Logic Express there is only the Garageband Epiano, I think. Logic Pro 9 had a great ePiano that they gave a new name and changed a bit in Logic X. Both very nice.
Yes, you may be right, not too many drums with brushes in Logic X, I think. Or does anybody else know where to look??
Kind regards,
Jaap

Can I upgrade from Logic 7 to Logic Studio (Logic 9)?

Can I upgrade from Logic 7 to the new Logic Studio (Logic 9)? Or do I need to purchase the Logic 8 upgrade first?
Thanks in advance.

Get the 9 upgrade, no need for 8 first.

Logical Standby working issues Oracle 9i, Windows

Hi,
Set up Oracle 9i Logical Standby on Windows. (instructions as per Oracle Documentation)
Did not have any issues setting up.
While setting up the Logical Standby, Recovered the Primary Database until Oct 10/09 8:16 pm
Registered the archive log in the logical standby generated hence and the FAL took care of copying/registering the rest of the archivelogs.
Created and inserted some records in Primary database and could see them in Standby.
So far so good.
On Oct11 data was entered into Primary database. Archivelogs were shipped to Standby, I could see them registered in DBA_LOGSTDBY_LOG.
The APPLIED_SCN,NEWEST_SCN were in sync as per DBA_LOGSTDBY_PROGRESS.
Today, we had some issues with data and when we queried the user tables: (no skip settings)
Couldn't see any data in standby past the recovery...
No errors reported in DBA_LOGSTDBY_EVENTS. No errors in Alert log also.
What could be happening?
Thanks,
Madhuri

I figured it out...
Today, we had some issues with data and when we queried the user tables: (no skip settings)
Couldn't see any data in standby past the recovery...I was using two tables as random spot check and both did not get updated. So, I was under the impression SQL APPLY did not do anything.
But, it did apply the redo on the rest of the tables.
These 2 tables in question were skipped because both of them had Function Based indexes.
They are very huge individual tables .
So, exporting them from Primary database and Importing them into Standby Database. Skipping DML in DataGuard.
That solved the problem.
--Madhuri

Early 2008 Mac Pro 3,1 Mystery Logic Board/GPU Issue

I recently received an Early 2008 Mac Pro 3,1 for free because the owner couldn't figure out what was wrong with it. It would boot up with the startup chime, but never output any video, and kept rebooting and replaying the startup chime. Using the diagnostic LEDs on the logic board, I was able to see that the Power Good LED (LED 7) and the EFI LED (LED 9) were both on, but the GPU LED (LED 8) never lit up. After trying all the PCI slots and confirming that the graphics card worked in another Mac Pro, I confirmed it wasn't the graphics card. I then tried a different power supply and different power supply cables, different RAM, different RAM boards, but still nothing. (Note: I also went through all the usual stuff: Power Cycling, PRAM, SMC Reset)
I then ordered a replacement logic board (used from eBay) and spent the weekend swapping out the logic board. After the swap, the Mac Pro STILL won't output video, and now the EFI LED (LED 9) won't even light up. Tried resetting the EFI Firmware via a CD, and still nothing. Does anyone have any idea as to what the issue could be? I'm 95% certain I plugged everything back in correctly on the board, but I don't know what else to do other than tear it apart again to confirm everything is plugged in. The only other thing I can think of is that the second logic board I received was also bad.
Please help!!!

Your problem sounds like a graphics card problem to me.
confirming that the graphics card worked in another Mac Pro,
Was this also a Mac Pro 2008 model? was it running the same Mac OS X version as you are testing? what version?
what graphics card are you trying to use? Genuine Apple or flashed PC or unflashed PC? what Mac OS X version?
That second board sounds Bad to me if it won't say EFI-OK.

Roland TD4SX, Addictive Drums 1.5 and Logic Pro 9 issues

I have been using AD and Logic with my Roland Drum kit for a little while now and while the automatic mapping from kit to plugin is working for the most part, Logic seems to kill the midi coming from one of the pads (the middle tom 45(A2)) and I'm not sure why. It requires me to remap this pad to another midi key to get it to work. I could only assume that Logic has taken this midi key for its own use but I have no idea how to find out what it is mapped to and how to remove that mapping. Anyone know how to debug this issue?
I believe this is an issue with Logic specifically. The reason I know this is because that pad and the kit in its default mapping work perfectly in Ableton Live but not in Logic.

You might find that you have inadvertently 'learned' A2 as a controller assignment. Open the *Controller Assignments* window ⌘-K, and delete the learned message that is 90 39 Lo7 (A2).
!http://farm2.static.flickr.com/1283/4714022674_7b9b8fd4ac.jpg!

Logic Express Sync Issue

MAC G5 2.0 dual 1mb RAM Tiger Digi 002 Pro Tools 6.9.2
Last night I downloaded and installed the Logic 7 Express demo from
the apple site. After opening and setting up logic I opened a current
Garage Band file. It plays very slow and sluggish. Similar to when you
have the sample rate set incorrectly. I keep getting sample rate
errors but can't seem to get it corrected. I tweaked most of the
options under the synchronization menu to no avail.
Pro Tools still runs fine, but Garage Band now does the same thing.
What did I hose? If I use the internal sound drivers from apple all is
well. I feel the issue is tied to Digi's core audio drivers.
Any suggestions?
T.

Call apple support. You'll have to provide a proof of purchase and they probably will give you a new serial no.
Fox

White screen started appearing when in Logic? RAM issue?

Hi there,
Am a relatively knowledgable MBPro user. I've an old beauty from 2007 which has done me proud all these years. I recently upgraded the OS from the original Tiger ( ! ) to Snow Leopard and the last three months all has worked smoothly.
Yesterday and today however when I've been working in Logic (still Pro8 - yes, I know!) the MBP starts performning verrry slooowwwwly (beachballs) and the white screen obliterates the arrange window. I've restarted a couple of times but the problem's still there when I open Logic and start running it.
My ETreCheck details are below.
Does anybody have any ideas as to how I mitigate this issue?
Thanks!
Adrian
EtreCheck version: 1.9.15 (52)
Report generated 2 October 2014 12:22:09 GMT+01:00
Hardware Information: ?
    MacBook Pro (17-inch Core 2 Duo) (Verified)
    MacBook Pro - model: MacBookPro2,1
    1 2.33 GHz Intel Core 2 Duo CPU: 2 cores
    2 GB RAM
Video Information: ?
    ATY,RadeonX1600 - VRAM: 256 MB
        Color LCD 1680 x 1050
        2367M 1920 x 1080 @ 60 Hz
System Software: ?
    Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:8:58
Disk Information: ?
    Hitachi HTS721010G9SA00 disk0 : (93.16 GB)
    S.M.A.R.T. Status: Verified
        - (disk0s1) <not mounted>: 200 MB
        Macintosh HD (disk0s2) / [Startup]: 92.84 GB (11.33 GB free) (Low!)
USB Information: ?
    M-Audio Ozone
    Logitech USB Receiver
    Micron Built-in iSight
    BUFFALO HD-PCU2 465.76 GB
        S.M.A.R.T. Status: Verified
        - (disk1s1) <not mounted>: 200 MB
        BUFFALO BACKUP (disk1s2) /Volumes/BUFFALO BACKUP: 465.44 GB (48.83 GB free)
    Apple Computer Apple Internal Keyboard / Trackpad
    iLok iLok
    Apple Computer, Inc. IR Receiver
    Apple Inc. Bluetooth USB Host Controller
Kernel Extensions: ?
    [not loaded]    com.Huawei.driver.HuaweiDataCardDriver (4.0.8) Support
    [not loaded]    com.digidesign.fwfamily.driver (7.4f1) Support
    [loaded]    com.digidesign.iokit.DigiDal (7.4f1) Support
    [loaded]    com.digidesign.iokit.DigiIO (7.4f1) Support
    [not loaded]    com.digidesign.mbox2.boot.driver (7.4f1) Support
    [not loaded]    com.digidesign.mbox2.driver (7.4f1) Support
    [not loaded]    com.m-audio.usb.midisupport.driver (1.1) Support
    [loaded]    com.maudio.usb.ozone.driver (1.8.1) Support
    [not loaded]    com.motu.driver.FireWireAudio (1.5 41560) Support
    [not loaded]    com.motu.driver.USBMidiKext (1.6 49190 - SDK 10.4) Support
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) Support
    [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.3) Support
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) Support
    [loaded]    tc.tctechnologies.driver.TCNear (3.5.6 11675) Support
Startup Items: ?
    Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
    DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
    MAudioOzone: Path: /Library/StartupItems/MAudioOzone
    Qmaster: Path: /Library/StartupItems/Qmaster
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.bombich.ccc.plist Support
    [running]    com.bombich.ccc.scheduledtask.B5EE8738-6951-42B0-8CD7-BB586DD6B937.plist Support
    [running]    com.digidesign.fwfamily.helper.plist Support
    [running]    com.m-audio.usb.firmwareloader.plist Support
    [running]    com.paceap.eden.licensed.plist Support
    [running]    org.glimmerblocker.proxy.plist Support
    [loaded]    PACESupport.plist Support
Launch Agents: ?
    [loaded]    com.hp.help.tocgenerator.plist Support
    [running]    com.motu.MOTULauncher.plist Support
    [loaded]    org.glimmerblocker.updater.plist Support
User Launch Agents: ?
    [running]    com.bombich.ccc-user-agent.plist Support
    [loaded]    com.macpaw.CleanMyMac.helperTool.plist Support
    [loaded]    com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
    [loaded]    com.macpaw.CleanMyMac.volumeWatcher.plist Support
User Login Items: ?
    System Events
    Activity Monitor
    Dropbox
    HPEventHandler
Internet Plug-ins: ?
    Flip4Mac WMV Plugin: Version: 2.3.6.5 Support
    FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.6.6
    Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
    Google Earth Web Plug-in: Version: 7.1 Support
    iLokClientHelper: Version: 3.1 Support
    RealPlayer Plugin: Version: (null) Support
    AmazonMP3DownloaderPlugin101749: Version: Unknown
    iPhotoPhotocast: Version: 6.0
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes: ?
    DigidesignMbox2 Support
    Digidesign Mbox 2 Pro Support
    Flash Player Support
    Flip4Mac WMV Support
    GlimmerBlocker Support
    Growl Support
    MAudioOzone Support
Time Machine: ?
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ?
         3%    activitymonitord
         2%    WindowServer
         1%    ps
         0%    fontd
         0%    firefox
Top Processes by Memory: ?
    238 MB    firefox
    70 MB    Dropbox
    59 MB    WindowServer
    59 MB    GlimmerBlocker
    53 MB    WebProcess
Virtual Memory Information: ?
    875 MB    Free RAM
    705 MB    Active RAM
    277 MB    Inactive RAM
    190 MB    Wired RAM
    229 MB    Page-ins
    0 B    Page-outs

AdrianZag wrote:
Now you have me worried, has CleanMyMac done 'damage' to my system?
And is an unistall AND a reinstallation of Snow Leopard really necessary?
I cannot say with certainty. I would make certain that your data is backed up, erase the HDD, install the OSX and then upgrade it to 10.6.8. Then install the user data. Any problems that may have been resident should be gone.
RAM upgrade issue: I researched via the Apple site if my particualr MBPro could have extra memory installed. After much online reserach, it was inconclusive - so I called Apple up and a techie told me that my model was one of the last that couldn't have RAM added. Are you sure he was incorrect? Obviously adding 1GB would indeed make a huge difference.
Do be suspicious and challenge advice you receive on these and any other forums. Mistakes can be made and I have to admit I have done so, but not too often. I have witnessed bad advice but I have never thought it was offered deliberately.
Regarding RAM, you have been misinformed. Your MBP will accept 3 GB RAM. Look at these two links, one for OWC and the other Crucial:
http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/
http://www.crucial.com/usa/en/compatible-memory-for/Apple/macbook-pro-2*33ghz-in tel-core-2-duo-(17-inch)
Read them carefully and you will see that both corroborate my position.
Ciao.

Logic Pro 8 Issues, Error Messages

Hi all.
I've been having a variety of problems with my home recording studio, which i have neglected to post about until now- from what i've read it seems no-one knows how to fix them. I'm turning to the MacTalk community to resolve my woes... First things first, here's the gear:
 MacBook Pro (mid-2008), 2.4GHz C2D, 4GB RAM, OS X 10.5.6.
 I use Logic Pro 8 primarily, and this is where all the errors are popping up. I record to WAV, 24-bit, 48KHz (for the sake of diagnosing errors, I have tried 16-bit, 44.1KHz and noticed no difference).
 All audio-related work is handled on a WD MyStudio External FW800 HDD.
 My audio interfaces are an Apogee Duet, and an M-Audio ProFire 2626 (both running latest drivers).
Now, there are 3 (possibly related) problems i'm having with my setup.
✖ Problem #1
I receive an error message indicating a 'System Overload' at random times during playback and occasionally recording.
It halts the audio, and I need to click play or record again. Sometimes it happens again and again, other times it’s just a one-off. This problem can occur with either the Duet or ProFire interface. Apparently the number of tracks I’m recording or playing is irrelevant, as it happens under many different circumstances.
✖ Problem # 2
I receive an error message telling me that the “Drive is too slow, error -10004”, and this happens only in recording (I think; oh and it looks like the previous dialogue box). As mentioned above, I use a FW800 external HDD, so it shouldn’t be a hardware requirements issue – it SHOULD be fine as far as I know. It was particularly bad when I was recording 5 channels of audio into the ProFire 2626. Like the previous issue, it halts the recording, and sometimes recurs. It may not happen with the Duet.
I may be imagining things, but I think it records fine indefinitely when I’m recording near-silence, i.e. not playing my drums. It almost seems as though the problem is triggered when I get particularly loud. Perhaps it’s clipping, I’ll have to check. Still, it shouldn’t cause an error that halts recording should it?
✖ Problem #3
This one only occurs with the ProFire. I get minor crackles and little bits of distortion and ugly tearing sounds in some channels occasionally. They each only last a fraction of a second, and usually aren’t particularly loud, but they spoil takes. Can occur during silent passages OR loud parts.
For the record, I typically record to WAV, 24-bit, 48KHz, with a 128 or 256 sample buffer, Medium Process Buffer Range, and Software Monitoring enabled. However, I have tried up to 1024 sample buffer, Large Process Buffer Range, 16-bit, 44.1KHz WAV, and turned off Software Monitoring – none of this made a difference.
So, if anyone thinks they can help me out here, please do so! I’ll greatly appreciate any input ☺
Cheers,
Chris

1. http://support.apple.com/kb/TA24535?viewlocale=en_USy
This problem points to a buffer that is set too low. Make it one step bigger, but leave the I/O safety buffer OFF.
also: you can disable the warning message.
2.
CAN also be buffer-related, but it may be the disk. Is it a 5400 or 7200 RPM disk?
It may also be that memory is too full. I would recommend installing Menumeters (freeware) http://www.pure-mac.com/diag.html#menumeters
You can monitor CPU-use, disk activity, memory use, paging activity and network activity with it.
Another thing to consider is to Freeze all Software Instrument tracks before recording. Also freeze heavily 'insert-pluginned' audio tracks. This may free up a lot of CPU power.
3. This problem might benefit from the above tips as well, but I think you can win the most by NOT using software monitoring when recording (for all three issues); it brings extra latency and puts much more strain on the CPU. Through which plugs do you monitor? And why?
I'ld recommend using the direct monitoring capabilities of both your interfaces, and avoid Software Monitoring when recording. Also being aware of what is going on (by using both Menumeters AND Logics' own CPU-meters) can be crucial - especially Paging (when active RAM is written to or read from disk) can disturb Logic, as well as background OS X applications that kick in during a session.
I also recommend turning off Journaling before a recording session. To do that, open *Disk Utility*, select the recording disk from its' list, hold down the ⌥ key and choose the menu *File>Disable Journaling*.
To turn it back on after recording, same actions, only now the menu item will say *Enable Journaling*.
regards, Erik.

Logic Pro 8 Issues

Im still using logic 8 right now, and I have had it for about two years now,but I am now getting this weird "System Overload Message" and also when I load it up, I have also gotten this weird message about my "DAE Folder" is missing. Does any one know how to fix these issues.
Thanks for your help....

Most of the NI Instruments don't run on Leopard because NI hasn't updated the drivers for them (check the NI website fort info, they say the update is due in Decembre...). The same counts for other 3rd party plugs so either you revert to 10.4.11 or wait for the new drivers.

Line input problem with Logic X, No issues Logic Pro

I use the line input on my 2011 Imac to record audio from my piano keyboard. When using LOGIC X there is no sound coming through the speakers, but with Logic Pro 9 I have no issues. I tested with new projects, ect but was unable to get to work.
In both Logic Pro and Logic X I have made an audio track and made sure input monitoring is on. I made sure volume was sufficient. I have tried to fix this to no avail and was thinking about bringing to apple store, but this appreasrs to be some sort of logic x bug (or I am missing something). Any help is appreciated as this is very frustrating.
Brian

I think you're missing something.
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5
You have to configure each program top to bottom, go to the above link and make sure all your settings are correct. (the won't necessarily match the pic)
Look at your Logic 9 settings Preferences/Audio and then set up Logic X the same way.

Final Cut Studio & Logic Studio upgrade issue

I am mainly audio based but have been working on projects more recently with Final Cut Studio 2 to deal with the video. As I use both Logic Studio 8 and Soundtrack Pro 2 a lot, and Final Cut Pro less, I plumped for the upgrade to Logic Studio which also contains STP 3 and Compressor 3.5 which seemed the right thing to do.
However the install info and dvd doesn't want you to install STP 3 or Compressor 3.5 if you have Final Cut Studio 2 as they "contain updated components that are incompatible with Final Cut Studio 2 or earlier. If the Logic Studio installer detects Final Cut Studio 2 or earlier on your system, it automatically deselects the checkboxes for Soundtrack Pro and Compressor in the Custom Install pane."
Personally I didn't want to run to the expense of upgrading Final Cut as I don't use Motion, Colour or Cinema Tools and although I am working heavily in DVD Studio Pro they haven't done anything to upgrade that application (boo!)
So what's the deal? Am I unable to upgrade ST Pro to version 3 and also unable to benefit from the upgraded Compressor even though I've actually paid for an upgrade that promised me these options, and no mention until I'd opened the package that there would be any incompatibility issues with Final Cut Studio 2!
Anyone know what these 'incompatible components' are?
Sounds like sharp practice and bad product integration to me...

I just spoke with someone in Apple Reseller Channel Sales and he told me that what is shipping now is strictly the Universal version. So, if you order a Final Cut Studio Upgrade from FCP HD ($699 retail, IIRC), you will receive the FCS Universal version in the big box with all the docs.

Logic 8 to Logic 9 Issues

Similar Messages

Maybe you are looking for