Logic 9 32 bit Server randomly doesn't Show GUI

It was really hard to get a solution to this because 99 percent of the problems were annoyingly about Logic X even though it clearly states it only runs 64 bits.
This issue just randomly started. None of my 32 bit plugins will show it's GUI. The 32 bit bridge will show up, but then when you click to see the plugin. Nothing pops up. Im running, and have always been running 10.8.5 and Logic 9.1.8. This is really weird. All these random issues, with logic, and my new laptop. Doesn't make any sense. Random didn't used to happen to APPLE. well please help, because this is a serious issue. I can't edit any of my sessions.

this might be a graphic issue with my 2013 macbook pro retina 2.8gig
i went to preferences and changed the display type... the plugin then shows up. but left in any one of the modes, if i take out the plugin and recall it the same issues remain. Maybe my graphic card is failing

Similar Messages

Windows Server 2008 doesn't show install date

Windows Server 2008 doesn't show install date for applications and update.<br /><br />It only shows "Unspecified", at the very top.<img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286394"
/><img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286395" />

In Programs and Features, you can have more options by right click on the tabbed window showing Name, Publisher and Installed on. May be you can check that once otherwise try to reinstall the features using Turn Windows features on /off.

Task manager on windows server 2008 doesn't show the memory from newly installed 2nd CPU

Hi,
We have a dual processor dell power edge t410 running windows server 2008 (64-bit), standard edition. I have recently added a 2nd xeon x5560 quad-core processor (first one is also x5560 with 32GB (4x8) memory) and 16GB ram (4x4). Seems like the new CPU is
recognized in BIOS, Dell's server admin app and task manager shows 16 vertical boxes (hyper threading is on both cpus) under Performance->CPU Usage History and these boxes show processor load spread relatively evenly across all threads. On the other hand
the additional memory for this CPU is visible in the BIOS, Dell server admin but not in the task manager, which still shows the 32gb under performance->physical memory. Rammap also shows only 32GB.. Currently running proprietary processes that along with
the metafile and windows own ring up nearly 30GB, which in turn causes system latency for GUI and apps, as if the additional 16GB are not there...
So the questions are these:
1) does anybody know why the added memory doesn't show up in the task manager / rammap?
2) if the new memory doesn't show up, does this mean that Windows does not use it (which should be impossible if the CPU is utilized, unless I am wrong about windows using the cpu..)?
Thank you,
- Kiril

Thanks for the reply Ravikumar,
Unfortunately this solution is inapplicable to my version of the OS as it is 64-bit and not 32-bit. Do you have any other ideas?
Best,
- Kiril
Yes, PAE((Physical Address Extension) is supported only on 32-bit versions of the
Windows, operating system 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see
64-bit System Design. The Address Windowing Extension (AWE) API is supported on 32-bit systems. It is also supported on x64 systems for both native and Wow64 applications.
Useful link for Address Windowing Extensions is:http://msdn.microsoft.com/en-us/library/windows/desktop/aa366527(v=vs.85).aspx
If the above info does not help you, please contact dell as suggested by
Shaon Shan.
Regards, Ravikumar P

Logging into 'Other' (Server) login doesn't show though bind does

Working on an OS 10.5.6 Advanced server that was set and users were only using AFP, but no DNS and Open Directory. So carefully went through and set these up.The standard testing 'checkhost' and all, shows DNS is working correctly. Client computers had the DNS pointer changed and went through Dirctory Utility and did the binding. Server indicates these computers are bound. One of four client computers works as expected, "Other" shows as a login choice and can log into the server. All the different client accounts work throught this station. Three computers show as Bind being setup, but the "Other" login simply doesn't appear. All but one are running 10.5.6, with one computer running 10.4.11. All three computers that show as bound, can sign in via Go > to the AFP share(s) just fine, only the server/network login doesn't appear. Have checked everything we can think of and need further suggestions on how to resolve this issue? - Lewis

LDAP is indeed listed and home folders have been created in an Auto-Mount directory. Everything appears just like the computers on this network that are binding OK and show an "Other" login. Now I have noticed one thing... every so often when I open Directory Utility - it shows the staus as "nonresponding" with a red dot. If I hit "Connect" it changes to a green OK dot, but upon logout/login the "Other" is still not a choice. Ran Disk Repair, Repair Permissions, re-ran the combo updater of the current system - 10.5.6. Ran the unbind on the computer and removed computer from Workgroup manager... still no joy. Just do not see a way to get a reliable Bind and network login? Bind seems to be happening... but "Other" as a network login just doesn't show.

Server Admin Doesn't show info for Software Update Service

In server admin, under the settings and available updates, I see a list of available updates, but they are labelled with the hash code for the update, not the name, and the info panel doesn't show any information like it should. We have our corporate firewall configured to allow connections to the server apple uses for this service so that we can get the updates. Any suggestions?

That option is only available after upgrading to iOS 5. It appears you have a 2nd generation unit, which can not be upgraded beyond iOS 4.2.1.

Server 2008 Fax Server console doesn't show outgoing faxes

We are sending faxes from Windows XP clients through our Server 2008 Fax Server. Most of the faxes are sent, however the Server Fax Console never shows any faxes as being sent. The Fax Console does show the Incoming faxes that have been received. What can I do to get a log of the outbound faxes so we know they were sent successfully?
Thanks.

Hi,
Thanks for the post.
Please perform the following steps to check it:
Open Fax Service Manager.
In the left pane, right-click Fax, and then click Properties.
3. On the Archives tab, please check the "Archive all faxes to this folder" item, and the sent faxes will be stored in this folder.
In addition, you could also use the following method enable activity logging for a fax server.
Open Fax Service Manager.
In the left pane, right-click Fax, and then click Properties.
On the Activity Logging tab, select the Log incoming fax activity check box to start logging incoming faxes and the
Log outgoing fax activity check box to start logging outgoing faxes.
You should receive an alert that the Fax service needs to be stopped and then restarted. If you do not, then right-click
Fax, click Stop, right-click Fax again, and then click
Start.
Thanks,
Miles
This is not a fix for this issue. I would hardly call this a workaround. We have admins that need to address fax sending issues when the faxes don't go through. Seeing the global outbox and sent items is a must for us. It needs to be
available from the fax console so the admin (secretary types, not IT admins) can review the issues.

Server Admin doesn't show Print Queue status

When I look at my print queues (all 17) under Server Admin, it shows queue name, # of jobs, shared via (IPP & SMB), and printer kind (HP LJ 1022n and HP LJ P2015). It has a column for status, but this is always 100% empty/blank. Also, if I go to the Jobs tab, then I can pick "Jobs on Queue" for all the queues, but the line below for "Queue Status" is again always blank.
Is there something I can do to get this info to show up in Server Admin? I know that CUPS knows the printer status, as I can go to localhost:631 and see the status in the Printers list and the Jobs list.
It isn't life threatening. It is just annoying to have to go to the web page when Server Admin -almost- gets me everything I need to diagnose a teacher's printing problem remotely.

Hi Keith
You could always consult the Print Service logs. If you set the logging levels to Debug or Debug2 you should get everything. You have to be a bit careful with this as the log can get quite large. Other than that I don’t know of anything that is available out of the box.
There may be others that can suggest a 3rd party solution that gives you the appropriate feedback you are looking for. Opening port 631 should not be that much of risk I would have thought?
Tony

OS X Mavericks Server.app doesn't show site, but default Welcome to OS X Server page

I am completely new to Mac OS X Server.app, so sorry if I sound dumb .
1. I installed Server.app to Mavericks.
2. Enabled Websites service in it.
3. Installed MySql.
4. Installed Wordpress using this script: https://github.com/MacMiniVault/Mac-Scripts/blob/master/mmvwordpress/mmvwordpres s-README.md
5. Created coresponding website to Websites
6. I opened Safari and navigated to my new created website: http://predstavitev.net:8081 and all I get is server's default page.
7. I checked what is the content of my "predstavitev.net" folder on server and found that it actually contains Wordpress installation files:
Please help me find out, what am I doing wrong. Thanks.

Check the Console.log for details that might be getting logged there related to this issue.
You're probably using NAT here, which means you'll be using split DNS or using an internal domain and an external domain. (Confusingly, DNS centrally matters with the web client accessing the web site, and rather less so with the web server itself.)
OS X Server itself requires DNS, irrespective of the web server — usual setup is the local IP network (not in 192.168.0.0/24 nor 192.168.1.0/24 subnets due to collisions with VPN connections later, and preferably somewhere "weird" in the 192.168.0.0/16 or 172.16.0.0/12 or 10.0.0.0/8 private IP blocks — pick a weird range for your subnet, not the first few ones that everybody else uses.
To verify local DNS services, launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command:
sudo changeip -checkhostname
That'll require an administrative password, might show a one-time informational message around the use of sudo, and will then display some network information and then an indication that no changes are required, or that there are DNS or network problems.
Do not use .local nor .arpa as your domain. (That works fine for incidental stuff, but network security and secure connections and related underpinnings all expect the servers involved to have valid DNS — not Bonjour.)
Unfortunate, if DNS is actually incorrectly configured, then various services including the mail server and Open Directory and the profile manager all tend to have problems, and all SSL-based security is dependent on proper DNS configurations.
FWIW, I'd be careful with managing a WordPress server, as breached with that Content Management System (CMS) package are common. I'd probably either host the site elsewhere (in the "cloud"), or would configure the WordPress web server in a DMZ to isolate the potential damage arising from a breach. (I use Drupal locally and while breaches with that are somewhat less common than with WordPress, I still lock that down, and still prefer to DMZ that.) With WordPress or Drupal or any other CMS, keep your patches current, too.

Server console doesn't show EJB section

Hi!
I tried to deploy EJB example (statelessSession.Trader) for WebLogic Server 5.1
(sp8) on NT 4. Server said that the ejb deployed, but I don't see ejb section
in the server console. There is only "console subsystem" in console screen. When
I run a client for the statelessSession.Trader I get a notion "Exception in thread
"main" java.lang.NoClassDefFoundError: javax/naming/NamingException". What is
wrong?

Better to make sure the EJB is deployed. You can run "java weblogic.Admin
t3://localhost:7001 xx xxx LIST" to browse the JNDI tree
"Alex" <[email protected]> wrote in message
news:3add1d05$[email protected]..
>
Hi!
I tried to deploy EJB example (statelessSession.Trader) for WebLogicServer 5.1
(sp8) on NT 4. Server said that the ejb deployed, but I don't see ejbsection
in the server console. There is only "console subsystem" in consolescreen. When
I run a client for the statelessSession.Trader I get a notion "Exceptionin thread
"main" java.lang.NoClassDefFoundError: javax/naming/NamingException". Whatis
wrong?

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.

Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic

Oracle Application Server Control Console doesn't show any servers

Hi there.
I'm configuring the Identity Manager, and in the process of doing so, I've to user tthe OASCC to do some operations.
I've discovered how to launch the OASCC and I can access it. The problem is that after configuring the ias_admin password the main menu doesn't show information.
Here is the link to the print screen with the main menu: [http://picasaweb.google.pt/r.vilhs/Oracle#5276306768949033090]
Am I missing something?
Regards,
Ricardo Vilhena

I have the same problem and I checked my target.xml file - it was in place and it contained both target records - with port number 18200 - I tried to acces this address, but it gave 404 error - actaully - this is better than nothing - beacause it indicates that someone is listening to this port, but it has no default page to display. Well - documentation states that 18200 is Oracle Management Agent port but I have not yet figured out what to expect from it. In my installation I have observed:
1) I have running app server 10.3.1 on port 7777, but the weolcome page doesn't display the login portlet for logging in this server - so - I have not logged into it.
2) I have problems accessing app server 10.2.1 on port 15001, I guess it is down and I have tried to start it from start menu entries - without result. I guess - this is very important server - it contains the forms.
But weill - at present I cann't see anu connection between these two server and the entries in the target page on port 18100, I guess - that this page should display both server, but in the post was said only entry for on port... Maybe management agent is for boths app servers (and not separate agent for each server?)?

XML shows in Flash, but doesn't show on server?

Hello.
I have a Flash website with 5 sections (Featured Work, News, About Me, Services, Contact). All the sections works fine, both in Flash and on the server, if the content isn't loaded from XML. But in the News section i use XML for loading the news.
If i test my movie in flash, the whole site works fine, and the XML News works perfect. But if i test the movie in a virtual server (like MAMP) or if i test it on my own server, the news section doesn't show.
I can't seem to find the problem?
Jonas Philippon

I'm sorry to sound so stupid, but this is new to me.
I tried pasting the trace(MT2.newsNum,Number(MT2.newsNum)) in both out and in the for loop, and i still get the same trace "5 5"
I'm not really sure what to do, so i'll just try explaining my whole site to you:
I have my "main.fla" with three layers with actionsscript:
- Navigation Actions
     - Has a for loop that creates 6 textfields with clickevents and SWFAddress that changes between 6 frames in a MovieClip (SubNavBar).
- Positioning Actions
     - Positions the textfield buttons, the navigation bar, and the sub navigation bar in the SubNavBar movieclip, and places my dynamic background.
- XML
     - I can't explain the XML layer, so i have attached it.
The SubNavBar MovieClip has 6 frames. The 1 is empty, so the site is clear at first. In frame 2, 4 and 6 there is a for loop like in the navigation layer, so these layers have a sub navigation bar, that once again changes between some frames in a movieclip.
In frame 3 their is the news code i pasted earlier, and in frame 5 there isn't anything yes, but it should just be graphics.
XML LAYER:
// XML LISTS //
// ========= //
var newsTitle:XMLList;
var newsInfo:XMLList;
var newsContent:XMLList;
var newsTitleArray:Array;
var newsInfoArray:Array;
var newsContentArray:Array;
// NUMBER OF ITEMS
var newsNum:Number;
// LOAD XML //
// ======== //
var xml:XMLLoader = new XMLLoader(this,"data.xml");
// function called when XML is loaded
function getXML(xmlData:XML):void {
// STORING RELEVANT DATA INTO LISTS FOR LATER ACCESS //
newsTitle = xmlData.news.article.title;
newsInfo = xmlData.news.article.info;
newsContent = xmlData.news.article.content;
newsNum = newsTitle.length();
    newsTitleArray = xmlData.news.article.title.text().toXMLString().split("\n") ;
newsTitleArray.reverse();
newsInfoArray = xmlData.news.article.info.text().toXMLString().split("\n") ;
newsInfoArray.reverse();
newsContentArray = xmlData.news.article.content.text().toXMLString().split("\n") ;
newsContentArray.reverse();
In the folder i have uploaded to my server, i have following:
- AC_RunActiveContent.js - Background.png (main background) - com (folder) (GreenSock) - data.xml - index.html - js (folder) (SWFAddress) - mailer.php (Contact Form) - main.fla - main.swf - media (folder) (Pictures For Background) - Mosaic.swf (Mosaic Overlay For Background) - P-Logo.png - preview.swf (Background) - SWFAddress.as - SWFAddressEvent.as - textLayout_1.0.0.595.swz - xml (folder) (xml config for background) (SEPERATE FLA FILE (NOT A PROBLEM) - XMLLoader.as
The XMLLoader.as is the file that loads my data.xml. The data.xml has the text to my news section.
XMLLoader.as:
package {
import flash.events.IOErrorEvent;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import flash.display.Sprite;
import flash.display.MovieClip;
public class XMLLoader extends Sprite {
private var loader:URLLoader = new URLLoader();
public var loadedXML:XML;
// accept parent path to xml
public function XMLLoader(mT:MovieClip, path:String):void {
// LOADING XML //
// =========== //
loader.load(new URLRequest(path));
loader.addEventListener(Event.COMPLETE, onComplete, false, 0, true);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOError, false, 0, true);
function onComplete(evt:Event):void {
loadedXML = new XML(evt.target.data);
loader.removeEventListener(Event.COMPLETE, onComplete);
loader.removeEventListener(IOErrorEvent.IO_ERROR, onIOError);
// Run getXML function from where this clas was instantiated
mT.getXML(loadedXML);
function onIOError(evt:IOErrorEvent):void {
trace("Error: " + evt.text);
I hope this helps you? I hope you now can give me more specific help?

HP 5550 web server doesn't show all required tabs

Good afternoon!
I have an issue with web server on hp 5550 Laserjet. Everything was good, but after reboot, it doesn't show all tabs such as "Information", "Setting", "Networking". It shows only "Home" and "Networking"...
Do someone know how to fix this issue?
Thanks in advance!
Any help will be appreciated!
Igro

Your best bet would be to try Rapidweaver: www.realmacsoftware.com
Best,
Andrew
I am not very into this stuff (can't write HTML),
do you might have a suggestion for an other
WebsiteBuilder?
We can't afford GoLive (which was very cool in the
early days built by CyberStudio) nor have I time to
learn or buy the complex Dreamweaver.

After installing OS X Server Bonjour printer doesn't show up

I just recently installed OS X Server 4.0.3. Before I installed it I could see the printer as a Bonjour printer from the Mac Pro and the 4 other Macs on the network. After installing OS X Server on the Mac Pro it cannot see the Bonjour printer. All of the other Macs still can.
The printer was listed in the Printers & Scanners configuration, but since it wasn't working I deleted it to try and set it up again. But now it doesn't show up the in the Printers and Scanners configuration?
Does this have anything to do with OS X Server? Is a port being blocked?
Why isn't the printer even showing up? I have tried connecting the printer to the DSL modem and to the Airport. Neither worked. The other Macs have not lost access.
I've tried resetting the printer, made sure the drivers are up to date. Currently I have to use the Bonjour printing because OKI Data has not fixed TCP/IP (hardwired) printing with Yosemite.
Thanks,
David.

Now that you've turned off File Vault try resetting the printer system: OS X Mavericks: Reset the printing system - Apple.
Also I wouldn't hurt to Boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk permissions and disk. Reboot normally afterward.

SQL Server Configuration Manager 64-bit server instance not showing

After installing SQL Server Express Advanced 2012 64-bit edition, we are unable to see the 64-bit Server Network Configuration in the left pane. We need to edit the TCP/IP and Named Pipes to enable them. All that is showing is the 32-bit instance
for our Acronis backups. Does anyone know how to view or add a SQL server instance to the Server Network Configuration msc?

can we verify if you really installed 64 bit. please run this query and post the results:
select @@version
Hope it Helps!!

Logic 9 32 bit Server randomly doesn't Show GUI

Similar Messages

Maybe you are looking for