Logic 9 - 3rd Party Plugin Settings not rememebered

Is anyone else having these problems?
GearBox and PodFarm don't recall their settings after Logic 8 to Logic 9 upgrade, so compete mixes have GONE!!!!
Wave Burner does the same thing with 3rd Party Plugins!!!!! Ozone is not recalling anything.
This is REALLY REALLY REALLY REALLY BAD!
I've lost weeks, months and in some cases YEARS of work on some projects.
Thanks Apple, lovely.

This is the wrong forum (because it is clearly not a general problem with AudioUnits), you should contact the plugin manufacturers!
I don't know GearBox and PodFarm, but Ozone is incompatible with a new feature in WaveBurner and needs an update.

Similar Messages

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

How do you install and delete 3rd party plugins from Logic 9?

I have been trying to install RX2 from iZotope with no success. I can authorize it in the standalone version but not in logic. I had a previous demo version of it installed and everytime I went to authorize it would point to the earlier version and not authorize and run in demo. I removed a number of files pertaining to it from HD & User/ Library/ Preferences and Audio/ Components and tried reinstalling. Now it doesn't even show up in the plugin list. Can anyone tell me how to clear this up? Also, how to deal with 3rd party plugins. What can I say, no problems with Reaper! Appreciate any help with this. Thanks

The Isotope website isn't very clear about it.. It seems to indicate the Windows version is 32 and 64 bit where as the AU version is 32bit and will work/is compatible with Logic 64bit.. which it will as it will run under the 32 to 64bit bridge... when Logic is run in 64bit mode..but as i said, it's hard to tell one way or the other.
The thing is, if you simply reinstall it.. and then run Logic first in 32bit mode and then in 64bit mode.. it should show up.
Where are you looking for it in Logic?
Does it show up in the AU Plugin Manager? (after, that is you have reinstalled it)

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

How can i get 3rd party plugins for logic such as massive or nexus?

how can i get 3rd party plugins for logic such as massive or nexus?

Buy the 64bit AU versions from their respective online stores...
Massive can be found at;
http://www.native-instruments.com/en/products/komplete/synths-samplers/massive/p ricing/?content=2115
Nexus 2 (as Nexus 1 will not work with Logic Pro X) from;
http://refx.com/products/nexus/summary/
However, I suspect, based on the fact you could have simply searched on Google.. that buying them wasn't what you had in mind.................

Flickering graphics in Logic - especially 3rd party plugins

I see a lot of people reporting (myself included) "flickering" of graphics in Logic, especially in 3rd party plugins so I decided to post a video of it occurring. Is this a "known issue"? I will be reporting it to Apple, and I hope everyone else experiencing it will do the same. Please watch the video and provide any input that you might have. Thanks!
https://youtu.be/y_G0Q8J2Egw

Hi Clancy,
Could it be related to a Retina display?
Possibly... but as you know, I cannot test for that as i don't have a Retina display... (and frankly I'm not sure I want one at this time ) and I could recreate it on a standard screen using the same 3rd party plugin as the OP used... so i think it isn't specifically a Retina issue but... maybe retina 'enhances' the problem because of the extra load placed on the Graphical hardware/routines
So...
Is the OP is using a Retina display with his Mac Pro?
I suspect however, given the video he posted, demonstrating the issue occurring with the PSP MasterQ2 plugin...that it's only happening with some 3rd party plugins.... (as again he stated "especially with 3rd party plugins" which really might mean... only with.. depending on how you 'translate' that) and therefore my comments earlier.
Finally while the number of posts about this issue is actually rather small ( as far as i can determine from some detailed searching at least).... the thread on GS seems to indicate it's been going on since early versions of LPX and is related to Yosemite rather than LPX itself...
https://www.gearslutz.com/board/logic-pro-x/987219-logic-10-1-0-crazy-flashing-g raphics-plugins.html
...and some people have been reporting the same sort of flickering issues with other 3rd party apps and also plugins for apps like Aperture for example... after upgrading to 10.10... again indicating its a general Yosemite issue rather than a specific app issue.

Quick look 3rd party plugins not working

The 3rd party plugins not working. Illustrator, Folder view, and quark are the three I use. They worked nice in 10.5.x Tried /Library/quicklook/ tried /user/library/quicklook/ even forced into system/library/quicklook/
Anybody else use these or any other 3rd party plugin?

I can confirm that Folder View plugin no longer works. the developer discusses it here
http://www.flickr.com/photos/t_trace/2060171212/
but I can't understand if they figured out how to fix it or not.

Will my 3rd party plugins be detected by Logic X?

I have logic pro 9 right now, if I uninstall it and leave my 3rd party plugins be and then install Logic X, will Logic X be able to pick up these right away? obviously the 64 bit plugins/instruments.

thanks for the quick response

Logic 8 and 3rd party plugins after upgrade

has anyone upgraded yet??????, whats the word on compatability on the 3rd party plugins
are they not going to work until they are updated again ???
has anyone tried or has anyone got the good word?
becasue mine will be here tomorrow
rock on

there are issues with multi-Output Instruments in the AU side; other than that so far so good .

Leopard logic pro 8 3rd party plugins

Hey all,
are all 3rd Party Plugins working in Leopard??

All the ones I use are. Hope this helps!

Sort 3rd party plugins by categories

Hi there,
If this has already been asked, my apologies, I haven't found an answer to it using the search engine.
Is there a way to sort 3rd party plugins by categories, like Logic's built-in plugs (Compressors, EQs, Delays, Reverbs, etc...)?
It would be much better to search the plugins by category than by manufacturer name, don't you think?
Again, sorry if this is an old question.
And thanks in advance.

The problem with organising your plugins into channel strips is that it works fine to load the complete channel strip, but obviously cannot be used to load individual plugins on a channel.
I would like to be able to organise/customise my plugin menu in the way that best suits me, including not having to scroll all the way down to the third-party list and so on - I agree that this way of loading plugins is pretty inefficient.
Unfortunately, while this is technically easier using a Mackie Control (because you can scroll through the plugins with a knob before clicking it to load that selected plugin) - it's also next to useless because the plugin list is seemingly random, meaning that each time you scroll to a new plugin, you have no idea whether this is going to be the one you want, or whether it will take another 53 knob turns before you get there.
The library is supposed to be the redeveloped solution for this, and while it helps to a degree I actually don't like wasting a quarter of the available screen space having it open, or hitting a key command to open and close it just to load plugins. But you can't load individual plugins from the library anyway - it's either channel strips, or plugin settings/instruments. There is no way to highlight the plugin slot and then see your plugin list - so we are back to the navigate through four sub menus dance to load a plugin.
So none of the current methods are particularly good, imo. I'd like to see something better. At the very list, a menu list of "Favourite Plugins" at the top of the menu list which you could organise and choose which plugins should go in there.

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

Cineform and other 3rd party plugins for Creative Cloud, what happened to them?

Hi I don't want to panic but I just downloaded Adobe Premiere CC and it's telling me that I've rendered my previous project with a 3rd party plugin that isn't available. What is the process of installing my 3rd party plugins to premiere so I can edit with Blackmagic codecs, Cineform, and multiple others I have enjoyed using in CS6.

I followed the instructions from the Cineform site as given by scarolan_CS4 (thanks for that).
http://support.cineform.com/entries/24336007-A-Do-It-Yourself-Guide-to -adding-CineForm-support-in-Adobe-CC-Windows-
Works like a charm.
The only issues I have are:
Cineform plugs (except for levels) don't work. But they didn't work on CS5.5 and CS6 either - plus cá change.
I'm getting the 'saving metadata' when closing PP error back - I'd forgotten how I'd dealt with that, switched something off in prefs, if I remember (more internet searching!) This wasn't happening before I copied the Cineform directories to their CC locations, so I suspect it's related in some way.
The editing presets and the rendering presets all work fine.
======================================
I've also had good luck with other 3rd party plugins. I created a junction type link from C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore to C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore. The default mediacore directory is empty so this works, but I copied across 3rd party directories and files in the individual plugin folders for PP and AE as there are default Adobe files in there which may be different from CS6 to CC.
Note that I also created a junction from Photoshop 64 plugins for CS6 to CC and this also works a treat.
Just thought I'd mention it to show that it can work, I'm chuffed that it does as I was anticipating a system OS install to enable plugins to work and to keep 15-20% of my system SSD free.
If this junction stuff is too complicated (and you don't mind having two sets of the same files or deleting the older versions) just copy the plugin and relevant settings files instead. I assume this will work, although I haven't specifically tested it myself.
You can find free utilities to create junction links for Windows or this can be done via the command line. I forget the name of the utility I use, it works via the context menu. I have found that junction tends to work better than symbolic linking or other types of file 'aliasing' for most of my fumbling about with this solution.
This stuff sounds more complicated than it is, once someone has given the steps to take and you have installed the junction/symbolic linking utility it's just a matter of following the steps.
EDIT - I (re-)found the solution to the
Metadata. Metadata writing in progress (n files pending)
error -
Go to Edit>Preferences>Media and uncheck Write XMP ID to Files on Import (thanks to Jim Simon on this forum for this).

3rd Party Plugins Have Disappeared After OS X Mavericks Update

Hi. I'm have a bit of a panic here.
I'm a sound engineer and I use Mainstage 2 frequently to run all FX live for a variety of artists.
After reading forums with regards to the Mavericks update, I found no evidence of it causing issues with Mainstage of Logic.
HOWEVER, I upgraded from Snow Leopard to Mavericks yesterday and Mainstage has decided to throw a massive wobbly. When I load up my show, it says "The plug-in named 'XXXXX' is not available on your sysem." It's done this for every single 3rd-party plugin on my machine so I basically have nothing! Good one Apple!
I restored my machine to a backup I took just before the OS upgrade. Guess what.......it's even doing it there now! It's back on Snow Leopard. I've been into the folders and all the plugins are there. For some reason, Mainstage isn't finding them. I'm at a total loss and about to throw this thing out the window.
Can anybody save me???
Thanks.
Jonny

Verified and repaired disk permissions but still no luck.
I thought Time Machine was meant to put the computer back to its exact state at the time of back-up?!
Anybody know if there's a UK phone number for an expert on Logic/Mainstage?!
Thanks.

3rd party plugins and Lion?

Does anyone know if there are still 3rd party plugins that are not working with Logic 9 and Lion?
Thanks,
Cobb

I don't think there is a comprehensive list anywhere of compatible plugins.
You can however begin looking here:
http://www.sweetwater.com/sweetcare/ts/detail.php?Index=33622
and
http://www.logic-users-group.com/forums/showthread.php?t=5203
Best to check the manufacturers' websites for your important plugins, if they don't feature on these lists.

Logic 9 - 3rd Party Plugin Settings not rememebered

Similar Messages

Maybe you are looking for