Logic 9 Issue Triggering Wrong 3rd Party Samples

I know the question says 3rd party but bear with me because I have ruled out issues with the 3rd party libraries and players. This is my Issue:
So far no one from 8dio, Native Instruments, or Apple can fix this and I am completely out of ideas.
I recently picked up a 2010 8-core Mac Pro and have had this problem ever since. The issue is only with my 8dio Adagio strings (most of them), it will either play the wrong sample, or no sample at all. I don't get any error messages though. All my other Kontakt libraries work fine.
Example: Bass "Shorts" will play "feather stacc", "marcato", but not "stacc" or "pizz". Violas will produce sound however it plays the exact same sample which ever articulation I select, but it will only play for a second then cut out, no sustained notes. This sort of issue is true for pretty much all of the strings. I have ruled out many things including:
1. Its not the 8dio strings libraries or Kontakt because they work fine in standalone mode through Kontakt, its only when I try to open them through Logic that I get the issue.
2. I did a fresh install of Logic and Kontakt and still the same issue, however when I installed the exact same configuration on a friend's laptop, they worked fine through Logic.
3. The strings did work fine on my old iMac until I dragged over and opened a session from the new computer, now I get the same issue there. The only way I can get it to work on the iMac is to open an old session which already has Kontakt and strings loaded up, otherwise a new project or new instance of Kontakt results in the same issue. This points to a settings or preference issue with Logic, however a fresh install and/or deleting the "preferences" file should fix it right? Wrong.
4. I have tried 3 different operating systems (Mavricks, Mountain Lion, and Lion), 2 different main drives, a SSD and a regular drive. I've tried a fresh install of everything multiple times, different user accounts, redownloading Adagio, running the libraries from both internal and external HDs....
After ruling everything else out it still seems like a problem with Logic other than the fact that the fresh install works fine on my friend's laptop but not my new Mac Pro (both running Mountain Lion). Any ideas would be much appreciated cause I'm all out of them. Thank you.
Gabe
2010 Mac Pro 8-core 2.4ghz
OS X 10.8.5
Logic Pro 9.1.8
Kontakt 5.3
8dio Adagio
Apogee Duet Firewire Interface

If your Audio Unit Manager is not booting, re-install.
Treatment

Similar Messages

Logic X EXS not finding 3rd Party samples

Hi- I am fairly new to Logic, but have a ton of third party EXS libraries and a number of patches when I attempt to load give me the file not found error. I have followed every online thread I can find regarding the location of the instruments as well as the samples, both with aliases pointing to the samples as well as not. I can not find any combination that works and it's very hit and miss whether it finds samples or not (all of which are held in the same parent folder, in one external location), which leads me to think this is more of a preference corruption issue. I also have tried putting the samples on the internal drive & changing the options in EXS to local drives only.
Am I alone here? Is anyone else having this issues? Does anyone know where to find & trash the EXS prefs so I don't have to trash all the Logic prefs?
Thanks!

Hi
Tom Hammer wrote:
You're have a Spectrasonics plugin open on your second monitor and when you come back to that screenset it's in the same location?
yep
Starting from an empty project, I added 2 Instrument channels (Omnisphere and Kontakt 5. Open both plugin GUI's, move dthem over to my 2nd monitor then Locked the ScreenSet (SS 1)
Switch to other S Set and back, K5 and Omni GIU's open where I left them (locked).
Close Project and then re-open... still works OK
CCT

Logic 9 no longer recognising 3rd party plug ins

Without any change to OS or software versions, Logic 9 has decided not to recognise any of the 3rd party AU plug ins that have been working perfectly in all projects ... until today.
How do I fix this?
I'm using:
Logic Pro 9.1.1 (1697.53) in 32 bit mode
OS 10.6.4
Novation Automap Pro 3.5
On starting Logic, a notification window tells me
Logic Pro: Plug-in "Battery 3 ("Not available
Logic Pro: Plug-in "FM8 (Autom" ("Not available
Logic Pro: Plug-in "Kontakt 3 ("Not available
Logic Pro: Plug-in " Massive ("Au available
Logic Pro: Plug-in "Ozone 4 ("A Not available
Logic Pro: Plug-in "Predator ("A Not available
Logic Pro: Plug-in "Predator (" Not available
Logic Pro: Plug-in "Sylenth1 ("A Not available
Logic Pro: Plug-in "Sylenth 1 ("Not available
If you have a definitive answer, I'd love to hear it.
Cheers.

I think logic is missing your Auto-mapped synths all of a sudden.
It happened to me with Predator just now.
After Automap was updated to 3.5 I got the same message.
Rescan with the Automap Plugin manager without Logic running and see if the plugins are available.
Tick the boxes of all the synths Logic expects to see auto-mapped, press OK, close Automap Server and restart logic.
Now Logic and Automap Server are started in order.
If the plugins are not available you can also try to move the AU components that are mentioned to another location on the drive.
Start logic, on your Channel Strip the names of the synths will be crossed out because you moved them.
Close Logic and Automap Server, move the AU components back to their original location and restart logic.
If I am correct they should be rescanned.
After this, scan with the Automap Plugin manager.
Check the boxes and tick the boxes of the plugins Logic expects to see Auto-mapped and restart logic again.
It is a lot of restarting I know, but the goal is to flip that bit in the software that is giving all this hassle.
I hope this works for you, It worked for me on logic 8.

Basic System Requirements for running 3rd party samples

Here's a VSL instruments conundrum.
From what I can see, I've got approximately double the minimum system requirements spelled out by VSL for running Vienna Instruments II. But my system is crashing immediately with only one instrument plugged in.
Here's my full setup and things I've tried so far.
MacBook Pro, 1.86gHZ Dual Core processor, 2G DRAM.
MOTU Ultralite I/O Interface
Logic Pro 7.2.4
500Gig 7200 RPM, 8mb cache RAM external Western Digital Hard Drive.
Firewire 400 (the early MacBook Pros from last year didn't have 800).
VSL installer, Logic Pro, and Syncrosoft are the latest updated versions (just bought VSL last week).
Vienna Instruments are installed on the external. Logic Pro and Vienna standalone are installed on the internal computer drive (200G, 40G empty).
Since I only have one firewire slot, I have tried piggy backing the MOTU and the 500G external hard drive both ways (MOTU plugged directly into the computer in front of the HD, with the HD piggy-backed into the MOTU's firewire slot, and the HD in front of the MOTU). No difference in results.
Specific issue: everything works flawlessly until I plug in just one Vienna sample. As soon as I choose it (before playing anything), the system starts to crackle, and even just trying to audition the sample in the AU Standalone taxes the system beyond being able to make a consistent sound. As I touch the "piano keys" in the standalone, most of the time I get no sound, other times I'll get the note accompanied by a lot of crackling. Then when I actually try to play the sample in a Logic Pro track, all sound is hosed. Only solution is to reboot Logic Pro, and 1/3 of the time I have to reboot the computer itself.
This happens whether I have 10 other Logic Pro instruments plugged in or none. One highly optimized Vienna sample by itself hoses the whole system (example - I've tried the Bosendorder optimized to only take up 1MB of RAM - same result including only 20% of the notes playing in the VSL standalone before I even try to play it in a Logic Pro track).
The system requirements spelled out by VSL are about half of what my system has. (VSL calls for a minimum 1G processor and 1G of RAM - I have a 186gHZ Dual Core processor and 2G Ram). I don't mind having to optimize and play some tricks to get 6-10 instruments to play at once, but I can't get a single instrument to run (with double the minimum system requirements).
Spent 2 1/2 full days working on this so far with no progress. Any suggestions? Thanks in advance for your help.

Well, you've managed to start three separate threads about the same thing. This not only fragments all the responses you'll get, but it also limits the search engine for future users experiencing similar problems, looking for solutions.... but hey, it ain't my forum...
I can't help but wonder if having two FW devices on the same bus is causing a bottleneck on the FW buss. Getting an external FW card for your mac might be necessary...keeping the VSL Hard Drive and the MOTU interface on separate busses.
In the meantime, try this... switch your audio driver to "Built-In Audio", so that Logic is using it's internal sound card, not your MOTU. Try loading a VSL instance and playing.
If it works, playing through your computer's speakers, then you've possibly found the trouble.
Have you emailed VSL Tech support yet?

How to install 3rd party samples in EXS24

Hi all,
The sample files are already in .exs format, and I have dropped them in:
~Library/Application Support/Logic/Sample Instruments
with the existing EXS24 samples.
However, even though the newly added files appear in the EXS24 index, there are no sounds when I choose a file.
I get a "File not found error".
What didn't I do?

From the manual:
+In order to be visible within the EXS24 mkII Sampler Instruments menu, instruments must be stored in the Sampler Instruments sub-folder of any of the following folders:+
+• ~/Library/Application Support/Logic: User-defined or edited instruments are stored here.+
+• /Library/Application Support/Logic: Factory-supplied EXS instruments are installed here.+
+• /Applications/Logic 6 Series: EXS instruments of the Logic 6 Series are stored here.+
+• …/ProjectName: Logic Pro also searches for EXS Instruments in the project folder.+
+Note: You can store your sampler instruments in any folder on any of your computer’s hard drives. If you create an alias pointing to this folder within the Sampler Instruments folder (located in the folders listed above), the instruments are displayed in the Sampler Instruments menu.+
Once they're in the right place, EXS24 should find them if you ask it nicely to refresh the list.
If that isn't happening, ask me again…

Flickering graphics in Logic - especially 3rd party plugins

I see a lot of people reporting (myself included) "flickering" of graphics in Logic, especially in 3rd party plugins so I decided to post a video of it occurring. Is this a "known issue"? I will be reporting it to Apple, and I hope everyone else experiencing it will do the same. Please watch the video and provide any input that you might have. Thanks!
https://youtu.be/y_G0Q8J2Egw

Hi Clancy,
Could it be related to a Retina display?
Possibly... but as you know, I cannot test for that as i don't have a Retina display... (and frankly I'm not sure I want one at this time ) and I could recreate it on a standard screen using the same 3rd party plugin as the OP used... so i think it isn't specifically a Retina issue but... maybe retina 'enhances' the problem because of the extra load placed on the Graphical hardware/routines
So...
Is the OP is using a Retina display with his Mac Pro?
I suspect however, given the video he posted, demonstrating the issue occurring with the PSP MasterQ2 plugin...that it's only happening with some 3rd party plugins.... (as again he stated "especially with 3rd party plugins" which really might mean... only with.. depending on how you 'translate' that) and therefore my comments earlier.
Finally while the number of posts about this issue is actually rather small ( as far as i can determine from some detailed searching at least).... the thread on GS seems to indicate it's been going on since early versions of LPX and is related to Yosemite rather than LPX itself...
https://www.gearslutz.com/board/logic-pro-x/987219-logic-10-1-0-crazy-flashing-g raphics-plugins.html
...and some people have been reporting the same sort of flickering issues with other 3rd party apps and also plugins for apps like Aperture for example... after upgrading to 10.10... again indicating its a general Yosemite issue rather than a specific app issue.

3rd Party RetroTaxes - After Organization Assignment Transfer

Hello All,
We have an issue with posting 3rd party retro tax payments when an employee transfer from one company/payroll area to another company /payroll area. For example, we have a employee transfer from "old" company code 2008/Payroll area U1 to "new" company code 2009/Payroll area U2. The employee has retro taxes from the "old" company which needs to be posted; because the employee has transferred to the "new" company code; the system has issues mapping the retro taxes to the correct company code, vendor, and HR payee. I have this issue despite the system been configured with the correct mappings for both company codes. Also, I discovered the system will not allow multiple mapping of the same wage type too.
Has anyone experienced this issue? I need to help. Willing to grant reward points for a helpful answer.
Kind Regards,
Brenda Goodwin

Thanks Arti, your resolution is helpful if the payroll dept knows there is going to be a retro adjustment coming through which took effect in the previous tax company.
How do you catch all retro tax payments that that ocurr due to a change in a employee's record that is effective in the pass which causes a retro to the employee's taxes in the previous tax company? The payroll don't know there is a retro until they exit payroll and then, start processing the 3rd party payments. They run into the issue of the system not linking the retro tax amount to the correct company code, vendor and HR payee for posting.
Regards,
Brenda Goodwin

3rd party remittance error

Hello All,
We have an issue with posting 3rd party tax payments .We created customer account types Z and X to post with PERNRs and assigned them to customer wage types and technical wage types (like /404). Righr now when we try to do 3rd party remittance we always has this error "No entry in T52EK for key /404 F or Q"
Did anyone has similar situation like we have.
Kind Regards,
Rena

Yes. I did assigned everything correctly.. I found error message in the program - I just replaced Z to Q and everything is working right now.
Thank you

No audio hear by 3rd party using carrier after upgrade ios5.1.1

after i used iCloud upgrade the iOS5.1.1 and I found my iPhone4 got issues on carrier whereby 3rd party unable to hear me at all although I have done all the below before I restore my backup data.
Reset all data and all setting
manually restore iOS5.1.1
reset all network setting
I also tried to change my sim card from telco company and even we tested to place my sim card on other iPhone4 and proven it is working. Vice versa, we tested to use my friend's sim card on my iPhone and same issues occurred whereby 3rd party can't hear my voice but I can clearly hear them.
Lastly, I've tested the app of skype and viber to make video call or call, it is working fine but it is not working when I use the carrier call (GSM) to 3rd party.
I suspect it is iOS5.1.1 issues rather than hardware issues because tested the mice of my iPhone is working perfectly by using the talking toy app.
Pls. advise who can help me?

uncheck the "Wait for Far End" option. Also, check and see what codec is coming across on the local AND Remote phone (if possible...I know the remote is a station on the key system, so I don't exactly know how to check that unit...) and see if it is actually coming across as a G711 and NOT a G729, which needs a transcoder, as you know...
I ran into this problem and did some manipulation with IOS transcoders through the call legs to get it to process correctly.

3rd Party Apps stop working each day?

Hi All,
Just wondering if anyone else has experienced this. I got my new 3G phone on Sunday and loaded a bunch of 3rd party apps. Monday morning, none of them worked--I click to start, and looks like it will start (the screen changes to the initial app screen), then it abruptly closes. Doesn't happen for the pre-installed apps. So I deleted and reinstalled 2 apps and they worked, soon after, I noticed all of them were working again. Yesterday and today, same thing--none of the 3rd party apps is working.
Anyone else with a similar story? Anyone know how to resolve it?
Thanks in advance!
Scott

Thanks for the info--though I have heard conflicting info that pressing home on the 3G actually does terminate an app completely. Unfortunately, it does not resolve the issue with the 3rd party apps not working. I've tried soft reboots, hard reboots, switching from wifi to 3G, and even did a full restore, but no change. The only current way I can get them to work again is to uninstall one and reinstall it. For some reason, this also fixes the rest of them. Pretty sure this is an actual OS bug. You don't even need to reboot after reinstalling an app--it works, then the rest of them do. I guess I will just have to live with it until Apple comes out with an update. I have never had an Apple device before...is there a way for a user to enter a ticket so that they know about this issue?

3rd party Certificate and AAA Authentication

I am using a cisco asa5520 and i have set up remote access vpn with an AnyConnect connection profile.
In the connection profile i have set up that users should authenticate using both certificate and AAA.
Due to a high security requirement, the user certificate is issued from a 3rd party.
This is working fine and the user now need a valid certificate and a username/password to authenticate successfully.
I added the CA certificate as a associated trustpoint on the ASA box to get the certificate verification working.
Problem:
If Jane and Joe both have a valid certificate AND a valid username/password, Jane could authenticate using a combo of Joes certificate, and Janes username/password. Both are valid (isolated), but i only want jane to be able to authenticate with her username/password and her personal certificate.
I got an idea that i could put the Serial Number of the users certificate on the user object in AD (on the users department field or something like that) and check if this value match during authentication.
So, to sum things up, i want to compare the Serial Number (SER) field of the users certificate with a field on the user object in AD during authentication. As far as i can see the user would need a valid certificate and a valid username/password to authenticate. The user would also be authenticated only if the serial field match the value on the user object in AD.
I am happy for any help that could point me in the right direction on how to accomplish this.
Best regards,
Kenneth

I actually got a better idea, and i think this will work great!
One of the guys at work pointed out that the sAMAAccountName is still used in many areas even though it is called pre-windows 2000.
After some trying and failing i got the idea that should try to change the "Naming Attribute(s)" on the defined AAA (ldap) server under "AAA server groups".
So i change the Naming attribute to "department", and put in the certificate serial number. I changed the connection profile and specified that it should use the "SER" value from the certificate as username. After that i tried to log in, and voila:
[123] LDAP Search:
        Base DN = [dc=Testlab,dc=local]
        Filter = [department=xxxx-xxxx-xxxxxxxxx]
        Scope   = [SUBTREE]
[123] User DN = [CN=Peter Pan,OU=Wonderland,DC=testlab,DC=local]
The ldap debug is clear, the ldap query during authentication is now searching for the user using the department field, and looking for the value of the serial number from my certificate.
I wasnt quite happy about using the "department" field and i took a look at the user object looking for a more suitable attribute. To my surprise the user has got a "serialNumber" attribute, and it can hold multiple values. I changed the "Naming Attribute(s)" from "department" to "serialNumber" and added the serial number from the certificat to the "serialNumber" attribute on the user object:
[138] LDAP Search:
        Base DN = [dc=Testlab,dc=local]
        Filter = [serialNumber=xxxx-xxxx-xxxxxxxxx]
        Scope   = [SUBTREE]
[138] User DN = [CN=Peter Pan,OU=Wonderland,DC=testlab,DC=local]
Worked like a charm!
I will settle for this solution, i cant see any issues regarding security, and it will be a breeze to admin. I will make a tool now so i can search for users in AD and update/view this attribute on the user objects.
Thank you for the input Marcin

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Issues with Form printing using a 3rd party software!!!!!!!!!!!!!!!11

Hi All,
We are printing our month end AR statements using Xerox DP100 printers. We are using a SAP Script as the layout form. Everything works perfectly alright when a direct print is issued to the printer. But the scenario here is the statements are sent to a 3rd party software so that the statements can be saved in their repository and made available to be viewed and printed whenever necessary. Now the issue is when this 3rd Party Software(TPS) reads the SAP generated PCL from its report store on the unix host and generates a PDF File that it presents to the web client user for (re)printing via his/her PC it appears that the TPS or Websphere or Adobe is performing a font substituion - replacing the Univers font(used in R/3) which is not loaded on the unix host with a different font(with different sizing and/or behavior).
As a result the horizontal and vertical positioning generated by SAP(which is correct for the Univers font) is 'wrong' for the substituted font. The fixed size fields print OK but gradually move to the right. The varying size amount columns do not align correctly and fall off the right side of the page.
Can anyone give me pointers on what can be done to arrest this error.
Does the font need to be loaded on the unix host or the font used in the form be changed?
Regards,
Karthik

Karthik,
Sap script behaves differently for different printers. You will have to change margins when you change your printer/software accordingly.

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

3rd party software Instruments and pluggins for logic ???

I know logic has lots of software instruments and pluggins. What would be some good 3rd party instruments and pluggins to enhance the working and creative vibe? I know Spectrasonics has some good ones !!!!!!
RD

Rodney,
I think it really depends on what type of music you do.... But as you already mentioned, Spectrosonics stuff would certainly be at the top of my list.
RMX is practically a must have, as far as I'm concerned, and if you have Recycle, it IS a must have. Same with Atmosphere... I couldn't work without either one now.
Trilogy is really good to, but I wouldn't say it's a "must have". Still, it gets used a lot here.
I really like Arturia's synths as well, but customer service there has a lot to be desired. But the Vintage pack will certainly cover a lot of analog ground, and the Mini Moog is simply amazing.
There are a lot of sample libraries available in Native EXS format, but EXS reads Giga and Akai libraries as well, and if you got something like CD Xtract, you could translate even more formats.
Native Instruments makes some nice stuff as well.
As far as plug-ins, my absolute favorite are the UAD-1 plug-ins. But that requires the PCI card. Best money I ever spent though, hands down.
Here are a few other companies that make excellent plug-ins as well:
http://www.pspaudioware.com/indexen.html?url=http://www.pspaudioware.com/plugins /vintage.html;
http://www.sonalksis.com/
http://www.tritonedigital.com/products.htm
http://www.ursplugins.com/
Believe me, that's just the tip of the iceberg...

Logic 9 Issue Triggering Wrong 3rd Party Samples

Similar Messages

Maybe you are looking for