Logic 9 lower volume output, and thinner sound than 7?

Hello, The sessions that I open up in 9, that I did in 7, sound thinner, and the mp3 volume is way lower on a bounce?
Anyone else notice this?

Maybe you have the pan law set differently or have logic set to normalize the bounce. The versions sound the same if set the same.

Similar Messages

MacBook Pro 2009 - Window 7 - Low Volume Output

I am experiencing low volume output on the internal speakers and slightly better volume on headphone output under BootCamp with Windows 7 x64 Ultimate. And of course the red light emitting diode is one constantly in the audio output jack.
I have seen fixes for the Windows XP folks over time and on my older MacBook (2006) with Vista x64, I found a fix. I have seen some thoughts on installing RealTek HD Audio drivers and that DID NOT work for Windows 7 x64 on my MacBook Pro 2009. I also tried reinstalling the CirrusAudio x64 from the BootCamp 3 drivers on my Snow Leopard DVD.
So I am left wondering if a driver update is forthcoming or if there is a fix that has been discovered and not reported online yet?

I'm going to leave this message for reference to other users...
As of October 22 2009 there is no known fix for the broken Cirrus Logic driver that comes with Bootcamp 3.0 under any 64bit Windows OS (including Windows 7 and Vista).
Apple seriously ***** for not doing anything about this for MONTHS and has lost a customer forever. I was going to get a 17in to complement my 13in MacBook Pro but this kind of driver issues is just plain unacceptable, and goes to show how you can't rely on a company like Apple for mission critical systems, period.
If they want to make ANY inroad in the corporate world the better get their stuff together and start delivering, the famous "excellent customer experience" for me is nowhere to be found. Lacking that, mac computers are only pretty although non-functional machines.
Sorry for the rant... I hope somebody from apple listens, but I doubt it.

Low volume output

i own an ipod nano. my problem is that, i get a low volume output.
is ther some problem with my nano or the headphones?
please help.

On the nano goto settings>sound check and UNCHECK it. In iTUnes goto Edit>preferences>Playback and uncheck sound check see if that works.

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

Hi nitramred,
To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Take care,
Alex H.

How do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ?

how do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ? this feature was available before but is still available now ? this is for IOS8 running on Iphone 5c.

I've never been aware of a function like this in the past. You could create a personal ringtone that would last 30 seconds or less and set the volume on that ringtone to do that with an audio editor, such as Audacity.

Low volume output through earphone from ipad air, itouch 4 and itouch 5 comparing to previous models

Has any body noticed that the latest iPad and i touch (i e from 4th generation onward) purchased from India (I don't know about other countries) has less volume output in earphones/headphones as compared to the old generations...
This is because i had to replace 2 i touch (i e 4th gen and 5th gen) for the same problem.
Now also when i purchased an iPad air WiFi cellular am facing the same problem.
I am buying an apple product for music and videos preferably but at last get disappointed due to your same defective products.
Has apple lowered their status of music and video for which they were famous.
Anyone help me out there for this problem.
Tell me solution excluding
1.To turnoff volume limit
2. reset all settings
3.make some changes in equalizer
4.restore factory settings and
5. increase volume level from iTunes..
All the above mentioned solutions i have tried nothing has solve my problem..
If apple does manufacture such product with less volume than the previous version then please tell us. We will buy product of another brand. Apple its a major issue. The only thing that this issue has not been discussed so much because most of the people do not hear at the max level.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

New G5 Low Volume Output

I have two new dual processor G5 macs at work and on both Macs there is hardly any volume output from the internal speaker. There is sound but when playing anything steamed from the internet sometimes you can barely hear it. But for the most part the volume is lower than what you might expect even from a small speaker.
Is there a way to increase the sound output on these Macs? I know of someone else that has the same problem too. So I know that is is not me.
iMac G4 15 flat panel Mac OS X (10.4.2)

If you have two brand new G5's it would seem highly unlikely it would be a hardware issue. But hey, stranger things have been known to happen.
I assume you have already check the settings in the Sound pane via System Preferences, no?
What happens if you plug in headphones. Is the sound output the same?
Try removing either com.apple.systempreferences.plist and or com.apple.soundpref.plist to the desktop and restart the computer so it can create new preference files. See if this makes a difference.
I am not sure if com.apple.soundpref.plist file actually exists. I can't seem to locate one on my G5. I have done a google search and random Mac users indicated that they have one.
Power Mac G5 / 2GHz Mac OS X (10.3.9)

Why are midi notes in piano roll lower volume when selected with pointer than when in playback?

I'm using Logic X on mac mini. When I select midi notes in piano roll with the pointer, they are at a lower volume than when in playback? I use Logic X on mac mini with Apogee Duet.

Thanks for your help Erik. I found the answer you posted about 30 minutes after posting my question. To me it doesn't answer my question 100%. The reason is that I can't expect to believe that every time someone records midi they have to go through all these extra steps to merge it (and it is not easy to do because they are hidden behind one another) in fact my problem was so unique that other logic users didn't understand why I am having this trouble. SO that brings me to my conclusion, that I have some setting that is keeping this from being a seamless operation and transforming it into a bunch of hoop jumps. Thoughts? Could it have to do with record settings of "merge"? I saw a few different settings there but none make sense to me.
thanks again.

Fix low volume output on Sky HD Boxes

Here a suggestion for you. Why dont you fix the low volume out on the Sky HD boxes? Loads of people have complained about it. Do something about it.

I have finally found a very cost effective solution to this problem. Cancelled Sky subscription and got Freesat with a Humax box. This does not have the fault that the Sky HD boxes have. In fact it has an "on the remote" volume control, and when this is turned to max the volume is exactly as it should be. The volume control works both the HDMI and the analogue outputs. Additionally there is also a mute button on the remote, again muting both outputs. Perfect. Cost effective because since I have been a Sky subscriber for over a decade, now cancelled, assuming I would have stayed with them for another decade I have saved myself £4121 including the initial cost of the Freesat box. Quite a shocking amount of money that I will be saving, having calculated it. Shame on Sky for not correcting this software issue when it was first reported by many users, especially as the volume function used to be there and they removed it. For those thinking of doing the same as me, the Freesat / Freetime system is excellent, the EPG is as good as Sky and the "roll back" TV aspect of the EPG far superior to that of Sky. Picture quality is at least as good (probably better as box is Full HD) The BBC iplayer implementation is also not the "cut down" version thst Sky have also implemented (another software short cut that bugged me), i.e. it is the same as you'd see on your PC / smart TVs with FULL programme content. What you don't get is Sky Atlantic but since I never watched this in over a decade made no difference to me.

Very Low Volume Output - Audigy 2

Hi,
All of a sudden my Audigy 2 ZS card has very low volume. Tried different speakers, tried uninstall/reinstall, tried clean boot of XP, no luck. Also, there is faint crackling when I turn volume up but I believe it's only because speakers are fully cranked and there is hardly any sound coming out.
Any help would be appreciated. Thanks

I didn't have any place to test the card but I did replace it with another one. Unfortunately, the other card gives the same result - very low volume. I suppose this means there is a problem with the motherboard. Do you agree? Is there any other test I could do that might pinpoint the problem area?
Yes, I received a "reply" from Creative. It was a form email that said they received my message and would respond (usually) within 24 hours. That is the only message I received from them.

Logic 8 : MAX output when highlighting sound in Midi notes window

Has anyone ran into this issue?
In Logic 8, when I highlight midi notes in the midi edit window (usually under mix window) what ever notes I grab bangs out at MAX volume, which as you can imagine, can cause some serious damage when one is mixing. Ever heard an 808 or 909 kick at MAX. My poor monitors actually start to bleed (red blood)...
Surely there is a way to set the highlighted midi notes output volume?
HELP

Are you saying that the volume when selected is louder than with the sequence playing? What is the velocity of the note set to in the event list? Do you perhaps have a playback parameter set in the inspector that is reducing the velocity of the track output on play back?

Insanely low volume with via8233 onboard sound

Even with all volumes on alsamixer set to maximum, my via8233 onboard sound puts out about half what it ought to. Through my headphones, it sounds as though it's ten feet away... I can't seem to find anything on this problem anywhere on line, and I don't have a good preamp handy - only the piss-poor, buzzy black speakers that came with my last computer. Can anyone give me some advice?

It is inaudible, can hardly hear sound. I did try that options line and still nothing. I shouldn't have to use another sound card since it did work once and it does work with all my other distros. But getting another card is an option.
Thnx.
Gullible Jones wrote:
Well... How low, exactly, is your volume? Is it just lower than it ought to be, or is inaudible? Because if it's inaudible, then try:
options snd-via82xx ac97_quirk=0
If your volume is just a lot lower than it should be, use a preamp, or just stick in another card.

Low Volume Output on 17" MBP

I just got my 17" MacBookPro last week to replace my 17" Powerbook G4.
I have noticed that the sound coming out of the built-in speakers is significantly lower than on my Powerbook. For instance, when adjusting the volume, I lose the "spit" sound after only 5 bars from full volume (5 bars black, all other white).
When I have headphones plugged it, it is not like this. I can hear the "spit" sound all the way down to only 2 white bars.
Anyone else experiencing this?

It's funny... I'm still trying to figure that out. There is one program that says "Quick Message" when you get one. At the same volume level as previous laptop, it is quieter. But with volume full up I believe things are a loud as they were before.
I just played a stored mp3 that I am have played before. I think the mid-volume is softer than it was. From there down I don't hear the song at all. But from mid to above I believe I can get the song as loud as before.
I did notice something but it wasn't conclusive. As more people chime in maybe there will be a consensus.

How do I create an excel file that has the volume output and the time at which it occured?

Hello:
I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed.
If anyone has ideas about how to do any of these three things, your help is greatly appreciated. I have the output from the syringe pump going into a line graph while I run the test with the time on the x-axis and volume on the y-axis. How would I be able to create an excel file from this information? I would like the excel file to have the time in one column and the volume at that time in the next column. I though that I had wired it correctly, however I feel that the time seems to be a little off and very exact. Attached is the block diagram of what I have done.
Hello:
If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
Attachments:
RATETEST.vi ‏202 KB

Let me start by answering the specific question, and then I will provide some suggestions on the code.
The function you want is the "Write to Spreadsheet File", which you're already using, albeit in a confusing means (more later). I was not able to find any place in your code where you're actually acquiring time information, so I don't understand your comment about the time not being exact. (I'm assuming you mean "not", even though that word was not in your actual sentence.)
As for the code:
As I mentioned, you're using the "Write to Spreadsheet File" twice, as well as the "Write to Measurement File" Express VI. All three seem to be logging the same information, though one of the "Write to Spreadsheet File" functions is logging some sort of volume and diameter information. Please pick one.
You're looping around the path for one of the "Write to Spreadsheet File" functions, but not for the other two functions. Why are you looping the path in the first place?
You' re continuously accruing data into an array to put onto an XY Graph. Please keep in mind that this means the program will slow down as it progresses as this array gets larger and larger, and LabVIEW needs to shuffle memory around. Depending on how fragmented your memory is, you may find the program will crash since LabVIEW cannot allocate a large enough contiguous block of memory for the array.
Your wiring really needs to be cleaned up. Tip: Right-click on a wire and select "Clean Up Wire".
In the middle of the diagram you have a case structure in which the True part has a single iteration loop that's adding 1 to the iteration and updating some local variable, and in the False part you're doing something else with it. I have no idea what you're trying to do, but surely there must be a better way to do it.
You seem to have two tank indicators on top of each other on the front panel and then flipping the visibility of them based on some value. I would think that it would be easier to simply display both at the same time, no? As a user, I would find it somewhat perturbing to see the tanks appear and disappear.

My volume button for higher volume(F12) is not working whereas mute and lower volume(F10 and F11) buttons are working, what should I do?

My volume button for higher volume is not working

I think there is a Windows bootcamp application that will recognize those keys. The bootcamp stuff is here: http://www.apple.com/support/bootcamp/
I think it is called bootcamp assistant. Look here: http://www.mac-guides-and-solutions.com/boot-camp-assistant.html

Logic 9 lower volume output, and thinner sound than 7?

Similar Messages

Maybe you are looking for