Logic 9, snow and project mix

I can make it crash at will
all i have to do is work for a bit and go to file and boom, done
i have to save using my key commands
I also keep getting the error message syncing midi to external device
no doubt maudio needs to update

Dude, I'd have waited b4 upgrading to SL.
M-Audio are awful at their updates, I've had a project mix for 3 years, and they still can't answer half the questions I have for them...
Is it too late to go back to 10.5.8?

Similar Messages

  • LOGIC STUDIO AND M-AUDIO PROJECT MIX

    Hi guys,
    I purchased a new imac yesterday, 2.4ghz intel core duo with 4gb of ram and 320gb hard drive.
    I also have a m-audio project mix which I bought around 4 months ago. I used to use this on my PC with cubase, however I cant get the project mix working at all now. I have of course ensured switched to logic mode lol.
    I'm also using mac os x 10.5.2 and downloaded the update for logic pro 8 as well, I believe its 8.0.1
    I installed the beta version drivers from m-audio website, which appears to work. I switch on the project mix, double click the m-audio firewire from my apps folder and thats ok. If I switch off the project mix theres a pop up which then says project mix not found so i'm guessing my mac is recognising the hardware. Also when I switch the MIX on and check the audio midi setup from utilities it is showing in there also.
    On logic i have set the preferences/audio correctly i think. The core audio check box is ticked, the device states project mix multichannel, I/O buffer 256 and 24 bit recording is enabled.
    When I go to preferences/control surfaces/setup and try scanning though nothing is found! When logic is opened none of the sliders on the project mix flick to start as they would with cubase and none of the transport buttons etc work! im getting really frustrated lol
    any help would be really much appreciated
    thanks for your time
    phil

    Based on the fact that I don't see it listed under Preferences>Control Surfaces>Setup>New>Install and the MAudio website says that, in the case of Logic, "DAW software must support Logic Control, Mackie Control, or HUI protocols" here http://www.m-audio.com/products/en_us/ProjectMixIO-main.html , I suspect that you will have manually add a Mackie Control/Logic Control in order use the Project Mix with Logic. Just set the input and output ports to the control i/o on the Project Mix. Or teach the Project Mix everything you want it to do manually under Preferences>Control Surfaces>Learn.

  • Does M-audios project mix I/O not function with Logic express 7.2 ?

    I am having lots of problems getting this working, and it suddenly occurs to me that this equipment may not work with the Express version. Anyone know?

    Scott,
    You bring music to my ears. A few questions (I'm sold at this point, just want these questions answered for sugar coating, I guess):
    1.) Does the Project Mix communicate effectively with Logic's 'MIDI Learn' feature? I tried utilizing this with M-Audio's Trigger Finger, but the Finger (or Logic, can't tell which) did not lock on to the assignment. Having any trouble with this?
    2.) Are there memory banks and is it easy to save all settings at any given point to certain bank? Ideally I'd like to have a different memory bank for each song, so an extensive inventory of blank memory would be very useful.
    3.) How's the LCD Screen? Really awesome or uncommunicative with the user (as in, do the abbreviations make it difficult to read, or is it fairly intuitive?)
    Thanks a lot. And Stash, your words are tight, too.

  • 2 Problems using m-audios project mix with logic, can you help

    i have just got my m-audio project mix, and it seemed very easy to set up till i tryed to start recording
    the first problem that i am having is that although, i can see that there is audio soming into the computer in the system preferences, logic is refusing to show anything
    the second problem that im having is that it is only letting me press record on 2 tracks when i would like to use all 8
    if anyone can help me id be very thankful
    G4 Powerbook   Mac OS X (10.4.9)  
    G4 Powerbook   Mac OS X (10.4.9)  

    Hi,
    I don't know anything about how your setup is plugged into each other,so I'll gracefully and carefully go out on a limb:
    1.The Migraine Audio device,it has sound outputs...yes??? Are these outputs hooked up to any sound-generating devices,like speakers,yes??? If not,that would be one reason why you don't hear anything from the migraine device.
    2.The Core Audio Drivers in Logic,they are configuerd correctly,yes???? They are selecting the Migraine device as the I/O,yes??? If it is not,then you might be recording with the built-in mic,oohh la la,not a good thing.
    3.If you do have spekaers hooked up to the migraine-induceing device,they should be on,and the monitor knob turned to about 10am,so your migraine does not get too loud.
    Did the limb I go out on break,or am i still up on the tree?

  • Will the m-audio project mix i/o work with Logic X?

    Hi,
    I have a m-audio project mix i/o interface/control surface.
    Will this work with Logic X?
    Thanks,
    Mike

    If it works now on 10.8.4, then yes. This depends on OS X and drivers (if needed), not on Logic. Logic can only 'see' hardware that the OS can see.

  • Will my m audio Project Mix work with logic x?

    Hi, just wondering if my M-Audio Project Mix I/O will work with Logic X. I am currently running Mavericks.

    If it works with any other CoreAudio based app on your Mac.. it should work fine with Logic Pro X as the key is .. if it is compatible with your OS X version. Its not about compatibility with Logic Pro X at all in reality... as LPX uses Core Audio which is part of OS X.
    So do you have it up and running in 10.9.2 and does it work with any other audio app? If so which one(s)?
    If you haven't tried yet, you may be out of luck as the last driver update for your device was way back.. for 10.7.4.... and some people had issues getting to work under Mountain Lion, let alone Mavericks...
    http://community.m-audio.com/m-audio/topics/project_mix_driver_update_for_mac_os _10_8_5_final_version_of_mtn_lion

  • I need to copy audio files and projects from logic to an external hard as my MBPis nearly full and my external hard drive has packed up with all my files on it, any suggestions on how do I copy 200GB from my MBP to a new external HD

    I Use logic and back my audio file and projects on an external HD ,this has now packed up . I have all the files in the MBP , but need to copy them to a new external HD, I have only 10GB left on my machine , how do I copy 200GB from my machine to a new External HD.
    any helpful full advice would be appreciated.
    angus

    Yes, just drag and drop them into the drive..
    How long will it take? Hard to say without knowing the type and speed of the drives in question.. and even then it's hard to estimate... but does time really matter?
    The fact you only have 10 Gigs left will/may slow the process down but it wont/shouldn't stop it...
    If needed.. just drag and drop some of the files at a time.. not all of them.
    Remember that copying files doesn't delete them from the original drive... You will still need to delete them yourself after they are copied over and empty the trash....
    However....
    When you saved these projects in Logic (Pro X?) did you save them using the include audio files option?
    If not, then when you move the audio files used in these projects... Logic will not know where they are to reload them........ and that will cause you issues.
    So.. if you didn't...
    I would use this method instead...
    Logic Pro X: Move, copy, and convert audio files

  • I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

  • TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

    Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

    In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
    However the 32bit to 64bit bridge plugin 32 Lives,  states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
    http://www.soundradix.com/products/32-lives/compatibility
    Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX..  That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

  • Can one move or upload a garageband project done on an iPad into logic for further and finer tweaking?

    Can one move or upload a garageband project done on an iPad into logic for further and finer tweaking?

    Share your GarageBand iPad project to iTunes as a project. Then you can import it into GarageBand and upgrade it to a GarageBand Mac project. And Logic can open GarageBand for Mac projects.

  • Batch Export Trick for Logic using Markers and XLD

    I've always wanted apple to implement batch export of multiple audio files from logic using markers as delimiters. So you can mix a concert and export it in one go without having to hang around and re-start bouncing for each track.
    Now you can do this (albeit in a two step process) using Logic 9.1 and the free and wonderful XLD!
    Just place markers in your project and bounce as AIFF (this is the only format that seems to work with this, so you are out of luck if your bounce file is going to be larger than 2GB). I suggest placing a marker at the very beginning of the project too so you first file is not called "Timestamp_0" or some such thing. You can even name the markers with the name you want each file to have, though keep in mind files will sort alphabetically of course once they are split if you have a specific order - so maybe preface them with 01, 02, 03, etc etc.
    OK - now go get XLD (the GUI version):
    http://tmkk.hp.infoseek.co.jp/xld/index_e.html
    download, install and run it. No window will appear at first. Open the preferences and choose your desired output format and options, directory, etc
    drop the AIFF file onto XLD (I've put XLD into my Finder window toolbar for easy access). When it asks you to open the embedded cue sheet, say "OK" and your markers should appear as a list of CD tracks that you can play double click to play with a player interface and preview.
    Then press "Decode" and voila! All your markers as separate audio files with the marker name, in whatever format (including the multiple formats option) you set XLD for.
    You can even edit metadata at this stage (but first consider whether your output format supports it)
    Some of the formats XLD can produce are
    AIFF
    WAV
    Apple Lossless (saves some space!)
    FLAC
    AAC
    MP3
    OGG
    etc etc
    Personally I think this is an absolutely fantastic trick and am happy to have discovered it. Hope it helps you too.

    Also, if you have gaps in the original session, put a marker at the end of the previous section and call it something like "end". Then you can uncheck all the "end" 'tracks' in the cue sheet and they wont be exported in XLD.
    Oh and it also seems XLD will preface your marker delimited files with their 'CD track' number. Useful to keep them in order, but they will probably want to be changed if you have gaps you took out with extra "end" markers.

  • Project mix window button problem

    Hi all
    This is driving me Nuts! When I press Window on my Project Mix Logic cycles though all the windows it will only stop when I random press zoom or other buttons I want to be able to press the window button and select each window on each press.
    can any one help
    Many thanks
    George

    Yeah... almost as funny as Logic using only 2 CPU's on a Quad. :-D
    At least this one is more attributable to the ProjectMix itself, as opposed to Logic (Logic, at least, gives us the workaround).
    jord

  • Inventory Report for actuals  and  projected?

    Hi,
    currently i am doing APO-BI Project. I have a requirement to extract the Opening stock from ECC and Projected(Forecasted) Opening stock from APO.
    both are 2 different key figures 1 is from ECC and another one is from APO. I need to display in Bex report in
    say for example, if we have 53 weeks in a year. if i run the report in week 25, in the bex report it has to display the Opening stock values from ECC up to week 25 and remaining weeks till 53 weeks it has to display Projected Opening stock values in the same line.
    plz provide me the logic to achieve this report.
    regards
    venuscm

    Hi,
    Create Two Cubes one is for APO and another is 0IC_C03 for Inventory. then build a MP on both and create reports.
    Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
    Use :See the steps how to load the data to 0IC_C03.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    0VALSTCKVAL      " For Value
    0VALSTCKQTY      " For Qty
    0CALMONTH        " For Month
    Use the above combinations in New Selections in columns and go it.
    For Qty Opening:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY     " For Qty
    0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input)  and set the offeset
                    " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
    For Qty Closing:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY    " For Qty
    0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
    In the same way build for Value and other Keyfigures on 0IC_C03.
    And
    Drag & drop
    0MATERAIL
    0PLANT  " Give some Input Variable.
    Thanks
    Reddy

  • Logic 9 crashed and won't open again

    Hello everyone,
    I have the latest Logic Pro 9 and I'm working on a MacBook Pro
    2.7 ghz
    4 gigs memory.
    Started recording a track with midi and audio tracks,
    At one point logic crashed so I reopened it and kept recording.
    Everything was fine,then I shut my computer down and opened
    It again and it started searching for my battery drums which are all in the correct folder.
    After a few battery drum searches it just stays there trying to load ??!
    No more dialog messages ?
    I have never ever had an issue with either logic or my MacBook Pro.
    I try to open up early saves and sometimes it opens but not all the time.
    Anyone having the same issue ??
    Also since my system crashed I opened a fresh logic and dragged and dropped all the midi and audio files to a brand new project and I'm still having the same issue,it won't fully load up ?
    I'm starting to wonder if battery is messing with the computer ?
    The only fix I found was to shut down the computer and start it up again and then it loads sometimes ??
    Any advice would be helpful,
    Thank you

    It seems you have a corrupted Project so to rescue most of the data from this corrupted project you can open a new project and then use the Import Data feature of Logic to bring across the tracks from your corrupted project... to this new Project
    See this part of the Help Guide for further info...
    http://help.apple.com/logicpro/mac/9.1.6/en/logicpro/usermanual/index.html#chapt er=7%26section=6%26tasks=true
    If you need more help after reading the Guide, let us know...

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Maybe you are looking for