Logic authorisation codes for logic 7.1

hi folks, got my self a wee problem here in Scotland.
I recently tried to install a new operating system on my Mac, tiger to be exact. for some reason I couldn't install it on my main hard-drive. there was an installation error and it wouldn't go any further in the installation process. as you all know logic 7.1 needs this operating system to work. this is my first problem, why doesn't it allow me to install it on my main hard-drive on my comp???
my second problem is this. I have a carillon external hard drive which I use for my audio and arrangement files. when i tried to install the new operating system on my crrilion hard-drive the set-up process worked fine and if i boot up from my carilion drive the operating system works fine. i then proceeded to install logic 7.1 and it works fine, now that i have installed the operating system on my external hard drive. (is this an ok way to use my new software up-grades?) the only problem i have is that i cant connect to the internet when i use the new operating system on my carrilion drive. therefore i cant verify my logic 7.1 software via the net. i really want to authorise it now and when i start the software it states that my software will only work for 5 weeks with no authorisation code. the question i ask is how do i get my authorisation code from the logic website using another computer? i want to activate it manually for now untill i get my internet connection sorted.
is there anyone else out there who has experienced the problems stated above and could you please help me out as im getting severly frustated and dont know how to give myself peace of mind. could you please help?
thankyou to everyone who hears my pain. x

The first problem you need to address is WHY you can't install Tiger on your mac HD.
Do you have enough disk space?
Would you consider backing up your data and re-formatting your Mac HD?
Then installing Tiger?

Similar Messages

I need a authorisation code for my logic 7.1 software.

hi folks, got my self a wee problem here in Scotland.
I recently tried to install a new operating system on my Mac, tiger to be exact. for some reason I couldn't install it on my main hard-drive. there was an installation error and it wouldn't go any further in the installation process. as you all know logic 7.1 needs this operating system to work. this is my first problem, why doesn't it allow me to install it on my main hard-drive on my comp???
my second problem is this. I have a carillon external hard drive which I use for my audio and arrangement files. when i tried to install the new operating system on my crrilion hard-drive the set-up process worked fine and if i boot up from my carilion drive the operating system works fine. i then proceeded to install logic 7.1 and it works fine, now that i have installed the operating system on my external hard drive. (is this an ok way to use my new software up-grades?) the only problem i have is that i cant connect to the internet when i use the new operating system on my carrilion drive. therefore i cant verify my logic 7.1 software via the net. i really want to authorise it now and when i start the software it states that my software will only work for 5 weeks with no authorisation code. the question i ask is how do i get my authorisation code from the logic website using another computer? i want to activate it manually for now untill i get my internet connection sorted.
is there anyone else out there who has experienced the problems stated above and could you please help me out as im getting severly frustated and dont know how to give myself peace of mind. could you please help?
thankyou to everyone who hears my pain. x

Sounds like Disk Utility may become your new best friend. Use it to make an Image, onto your internal drive. voila-authorizations are XSkey dependant, not system dependant.

How to create new logical function codes for Subtype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

How to create new logical function codes for Subinfotype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

Lost registration code for Logic Express 7

i got Logic Express a few months ago and cannot remember for the life of me what i did with the registration code so i can't even use the program. can you give me any advice on what to do? thanks much.

If you bought it from the Apple Store, they'd have records of the purchase, and could perhaps provide you with the proper numbers.

Lost registration code for Logic

Hi I NEED HELP !!
I have Logic 6 and 8 on my G5 but I need to install it into my Macbook.
I've lost the registration (in recent house move) and I need to do this asap as I'm going to Copenhagen to write/produce at the weekend and I need to use my laptop for the work...
I know this is very basic ( and believe me I feel alittle stupid ) but what can I do?
I have the logic dongle still ... do I still need the registration number for it to work?
any help would be greatly appreciated !!
Thank you

I have the logic dongle still ... do I still need the registration number for it to work?
Hi there,
Yes you need the LP8 serial number.
The XSkey is needed only if your Logic Studio(Logic Pro 8) is an upgrade from a previous version.
Call Apple Support ,with proof of purchase.
A

T code for logical data base

Hi
could pls let me know the Tcode to look for the logical data base in sap r/3
Thanks
P

Hello,
SE36
Regards
Saket Sharma

HT4061 how can i unblock my iphone in paris i have authorisation code for it but its in french any help

i have an email from orange france with instructions but i am not sure if i have to do that on itunes or orange.fr help me

Most carriers require that you restore the device in iTunes to complete an authorized unlock.

Sorry another upgrade question Emagic Logic 6 Platinum to Logic 8

My question here is about upgrading. I have searched the forum and Apples site but have not been enlightened.
A few years ago I briefly used Logic as the front end on a PTs HD system I owned which I still have the dongle for. This was back in 2003. Im pretty sure it was then called Logic 6 platinum and it was before Apple bought Emagic
I no longer have those original disks but I have a hunch they wouldnt be compatible with the newest OS Is that correct?
So, if I go ahead and buy the upgrade how will the software know I'm upgrading if I cant load the old version...which I would rather not do anyway. If I have to produce a serial code that was held on a sticky bit of paper, I dont have that now, and the store I originally bought Logic from has since gone under.
IF I can upgrade, would I get the DVD's with the samples + Manual, or do they send only a disk with the programme.

Correct, you don't need the disks, and you don't need to install old software versions.
When you run the installer, it will ask for your new LP8 serial number, and will then ask you to insert your XSkey so it can check you have a Logic authorisation valid for the upgrade - then it will install LP8, and you will no longer need the key plugged it when running Logic.

Need new activation code for NFR XS key

who knows who to email to receive new activation codes for logic NFR key. I havent gotten a response for the [email protected] address. what is the proper Apple email address to get codes from?

All the suggestions in this forum were made because people assumed that you are using Logic Pro 7.1 and Mac OS X.
I didn't assume this at all. I still think that they should be contacting apple, because as far as I can tell, an NFR version of a no longer selling product is not something you would ideally want to be hanging on to. apple would be able to tell you if they'll change it over for a logic 7 one, or to have a license bought for it so you can keep running 6 on OS9. NFRs are after all demo versions, usually given out to dealers and/or VIPs, I don't see why they would want to maintain NFR licenses out there for software that they are no longer demo-ing to sell. doesn't mean you can't buy a normal license though.

AUTHORISATION CODE

I want the authorisation code for my photoshop cs3 extended version. please help.

If you registered it with Adobe, your serial number shows under My Products when you access your Adobe account at the main Adobe web site.
If you did not register it but have bona fide proof of your purchase, contact Adobe customer forum by phone or by web chat.
There is no one here in this user forum who can help you.
If neither of the above applies to you, then you are S.O.L., severely out of luck.

ABAP Routine code for the below logic

Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i   , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element       : ZWBS_ELEM is coming from transaction data data source as well as master data.
                                 In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
                                 Also we are loading separetly the master data for ZWBS_ELEM.
                                 The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority                : PRIORITY     and table name /BIC/MZWBS_ELEM.
                                  The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
                                  the field name is    PRIORITY.
                                 When PRIORITY = ' i ' then    ZWBS_ELEM is at IOS Level
                                 When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.

Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI

Where to copy the codes for flow logic?

Hi.
I know that SE37 is to access the source code for function modules,
and SE38 is to access the source codes for programs/reports.
Does anyone know where I could get the codes for the<b> flow logic of the dialog screens</b> called by my programs?
Thanks.

Hi,
SE80 transaction
Select program in drop down & enter the program name
Best regards,
Prashant

Code for given logic

Hi all,
How do i write the code for the Below
Logic is :
Check for BEDSD = X in table TVEP
Note all such ETTYP
With this ETTYP check for entries in VBEP
If entries exist in VBEP, Note all such ETTYP
With this ETTYP check in TVEPZ, and note PSTYV
With this PSTYV check in T184 and note AUART
Refer to Table TVAKZ
output is :
VKORG/ AUART/ Desc. Of AUART/PSTYV/
Desc of PSTYV/ ETTYP/ Desc of ETTYP/
relevant for Transfer of Requirements
Thanks in Advance
Mamatha

Hi in the above question :
TVEPZ, T184, TVAKZ Are Pooled tables.So, Join is not allowed.
Thanks
Mamu

Is there a logic:match equivalent for JSTL?

In a search page I execute a query which returns an array of objects (All objects are of the same object type and are cast to Object[]) and each object has many attributes. I tried using <logic:iterate>, but I was never successful in having it display any results. I believe this had something to do with the entire array being passed via session scope instead of just one record and me not specifying it properly with <logic:iterate>. I was able to successfully use <c:forEach> and it worked right away. I stuck with using that because of its "just works" ability in addition to using a lot of other JSTL code. However, one of the attributes that is being printed out needs to be parsed and is of the form "Yxxx". <logic:match> covers this very nicely, but when I specify it in the below code it is not able to find my variable in any scope.
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
    <logic:match parameter='${myResults}' property='pin' value='Y'>
        <c:out value="Preeti"/>
    </logic:match>
</c:forEach>I have done several google searches, but I haven't found a JSTL equivalent for <logic:match>. If there is one could someone please tell me what it is? In addition, although <logic:match> is great I still need to print out a substring of that attribute. Could someone tell me how to do that? If this is not possible could someone please tell me if its possible to use <logic:iterate> with an array of objects like I was attempting to do initially so that I could use <logic:match> at least?
Thanks to all of you for your time.

Yes you can use the logic:iterate tag. I think you have to specify the type of the exposed variable though. I prefer the forEach loop.
I think you are using the wrong attribute in the logic:match tag. You should be using the "name" attribute rather than "parameter"
Parameter attribute refers you to a request parameter, and I pretty sure you don't want that.
So given the collection of objects in the session attribute "result"
This should loop through them all, and see if they start with the letter 'Y'
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
    <logic:match name='myResults' property='pin' value='Y'>
        <c:out value="Preeti"/>
    </logic:match>
</c:forEach>As for the latter bit, are you using a JSP2 container and JSTL1.1? It would appear so seeing as you are trying to use EL expressions in the logic:match tag.
If so, you could make use of the JSTL function library:
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
   <c:if test='${fn:startsWith(myResults.pin, "Y")}'>
      <c:out value="${fn:substring(myResults.pin, 1, -1)}"/>
    </c:if>
</c:forEach>And I've just spotted a very cool function in there: substringAfter
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
      <c:out value='${fn:substringAfter(myResults.pin, 'Y')}'/>
</c:forEach>Cheers,
evnafets

Logic authorisation codes for logic 7.1

Similar Messages

Maybe you are looking for