Logic Backup / System Upgrade

Hi,
I have been helping a friend today upgrading his mac pro with new memory and an SSD to replace the default hitachi hard drive.
He is currently running Logic 8 on Leopard 10.5.8 and would like to upgrade to Mountain Lion / Mavericks.
I gave him two options to either do a clean install or to upgrade which would mean firstly upgrading to Snow Leopard and then upgrading to Mountain Lion or Mavericks.
He needs to keep all his audio units / plugins and custom presets, settings for plugins.
What would be the best way to backup all the audio software settings and then restore after a clean install?
We tried upgrading to Snow Leopard after cloning his system drive to the new SSD and it said that Mac OS X cannot be installed onto this drive.
Any help / advice would be awesome!
Thanks.

Note:
Firstly, Logic Pro 8 cannot easily be installed from scratch on a Mountain Lion/Mavericks System..... It is possible using Pacifist but it is not for the non-technical minded.
Second...Trying to 'move' Logic Pro 8 (or 9) and it's content over to a new System drive with a new OS, manually or via any OS X utility.. is very tricky as often this causes all kinds of weird behaviour...errors etc.. relating to permissions/account issues... and is not recopmmended. It is recommended that one starts again from scratch but in this instance see #1
Thirdly, some older plugins/Interface drivers and so on etc.. are not fully compatible with ML/Mavericks...so one needs to check beforehand if there are updates to provide full compatibility first before attempting this...
Personally, if one is needing to upgrade to Mavericks.. for whatever reason.. then I would recommend creating a second boot disk... and then install Mav and if wanted.. Logic Pro X on that drive.... to ensure full future compatibility.... and keep the original Hitachi Drive for Leopard and LP8 for backwards compatibility.. with older projects/plugins etc.. and just boot between the two when needed.

Similar Messages

When installing a system upgrade, do i need to backup my files, photos, etc. first?

When installing a system upgrade, do i need to backup my files, photos, etc. first?

No, you don't need to, but it is highly recommended. Upgrades can fail, the computer may fail, the may be a power outage, etc. Never be without a current backup. Never upgrade until after you make a backup.
I recommend making a bootable backup by cloning:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How to restore a backup copy of 'My Music", from an external backup system

Is there a document somewhere on the procedure to recover iTunes when you used a 3rd party backup system?
Issue: I am having difficulty restoring my iTunes library from a third party backup system that mirrors all the files on my computer onto a remote disk drive. First I restored the files onto a new computer, then I loaded iTunes
for windows, and then used authorize option. iTunes does not show any of my files, and appears to have erased the files I restored. I am lost what to do next, I can restore the files again if need be, just want to read some instructions instead of guessing.
Background: My desktop computer gave me error messages when I rebooted my computer just after upgrading from iTunes 7.0.18 to iTunes 7.0.2. I got an error message that the operating systems SMS hive file is corrupt (a security file). After some investigation a technical person in my company tol me that the file is gone, on both my mirrored disk drives. Would appear that this is a serious iTunes bug or a serious hardware problem. Not knowing which, and confident I have a good backup, I have placed that computer on the side, and took a spare PC and started configuring it to be my new home computer.
I loaded all the Windows patches and installed, recovered all the files under "My Documents", loaded iTunes, Authorized the computer, and don't see my files. When I go back to "My Music" subdirectory I see very few files, when I am in iTunes I don't see my music.
The backup and restore was for all the files in "My Documents" kept on a remote server in my home, a Seagate Technology product called Mirra.
Questions:
1. How should I have restored those files? Apparently the method I choose does not work. All Apple FAQ information is based on me using the Apple Backup & Restore method, which I don't use, instead favoring using a single product to backup all my data.
2. Are there other reports of microsoft Windows Hive or SMS files being damaged in the iTunes upgrade process? Any thoughts as to this being related to the iTunes upgrade process or digital rights management?

First -- by default iTunes stores its Library in "My Documents\My Music\iTunes\iTunes Library.itl", and its Music in "My Documents\My Music\iTunes\iTunes Music\".
Make sure you have a "iTunes Library.itl" after the restore -- if not, and your backup software supports it, try an older version of the file. If your backup software only keeps the last version of the file -- well, then you are SOL, and you will have to re-add the files to the Library. You will also have to rebuild your playlists, ratings, etc.
Since you have "very few files" in the iTunes Music directory -- either you weren't storing your music there, or your backup didn't work. Are you sure you weren't using a non-default location for your music files?
If you had a hardware problem then it is likely that your backup stopped working properly at some point. This is why you need a rotating backup scheme and periodic archiving of files to non-writeable media (If you have the time/money)

BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0

Background:
I am relatively new to BW team and will be going through my 1st source system upgrade.
We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
We are upgrading to the source system to ECC 6.0.
In Development and QA Environments:
we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
We have a opportunity to compare the BW Objects, data flow and data loading from
both source systems.
In Production, however, we will just upgrade over 3 days downtime.
One Question that comes to mind in this regard...
What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
Some of the suggestions that were given to me include following points.
Before Upgrade:
1 Check data, taking pre images of it for testing with post upgrade.
2. Perform proper analysis of Source system related BW objects.
- A complete listing of actively used Datasources,.. etc.
3. Make delta queues empty,
Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
After Upgrade:
1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
(depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
Maintain Control Parameters for Data Transfer
http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
4. Check for Changes to extract structures in LBWE Customizing Cockpit
- OSS Notes 328181, 396647, 380078 and 762951
5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc.
Below is a link for some useful programs in this regard.
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
new/changed datasources,if needed.
8. Check all CMOD enhancements.
If we are using a customer exit with the extractor in the OLTP, see Note 393492.
7. Check for unicode (all custom programs or Function Modules for DataSources)
5. Check all the queues in RSA7, start delta runs and test data consistency.
For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
9. Take back up of data posted during upgrade for contingency planing.
10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...

Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
We have similar scenario -
We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
Our strategy in ECC deployment ->
In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
In production we are going to use same system PRXX upgraded from 4.7 to ECC.
Now we are in testing phase of ECC with all interfaces like BI in Dev.
My questions are below ->
How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
Also in new ECC sourcesystem copy we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
Is there any easy way for above scenario ?
Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
I have found some other links which have some pieces of information regarding the topic -
Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Re: ECC 6.0 Upgrade
Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
ECC 5.0 to ECC 6.0 upgrade
Thanks
Prasanth

App disappeared after system upgrade

After a system upgrade one of my apps disappeared. How do I get it back?

Easiest thing is to load your backup
Beyond that a lot more information is needed and it may be difficult and/or expensive - which is of cousre why you always have a backup and especially before doing any upgrades or updates - if you do not you are 100% guarenteed to lose your photos and other files sooner or later
LN

Z10 ...no longer able to add contacts after last operating system upgrade

I am Z10 user and after my last system upgrade i can no longer add any new contacts. This is being reported on a number of forums. Is there a fix? If I don't hear back from blackberry by the end of the week I will be dropping blackberry and moving to the Samsung Galaxy 4 or Apple I phone. Blackberry has blown it.

There's no need to double post and cross post in different threads, one is enough and your earlier post has been responded to.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Can-t-add-new-contacts-after-upgrading-to-10-2...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

System upgrade fails with pacman - phc-intel requires kernel26 2.6.31

Hello,
I'm a relative newbie to archlinux, so I hope I'm not asking a too stupid question ...
I have installed arch on an IBM Thinkpad X40. Was now on extended holidays and haven't done a system upgrade for a while. Wanted to do this now and pacman -Syy works fine. However, when I then start the upgrade with pacman -Su, the following error message occurs:
:: Starte komplette Systemaktualisierung...
:: portmap durch core/rpcbind ersetzen? [J/n] J
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: phc-intel: benötigt kernel26<2.6.31
translated into English it basically means that pacman wants to replace portmap with rpcbind. However, the following error message occurs whether or not I say yes. The error messages says that it cannot fulfill the dependencies as phc-intel requires kernel26<2.6.31. The strange thing is that my kernel at the moment is 2.6.29.
A first run of pacman -u worked fine but only upgraded pacman itself. I had a pacman.conf.pacnew in /etc which I renamed to pacman.conf and kept the old one as a backup. However, this also didn't change anything.
I hope you guys can help me out, thanks in advance,
F.

The update will be trying to install a new kernel, which is why you're getting the error. For packages in the repos, a new one would be built that's compatible with the new kernel. Since it looks like phc-intel is from the AUR you'll need to build a new version yourself.
Edit - that's what I get for stepping away for a bit, you already got a response and fixed it
Last edited by mcmillan (2009-12-05 19:14:24)

[Solved] system upgrade fails with util-linux/eject conflict

I backed everything up, then deleted the fontconfig links and updated fontconfig, which worked properly. Then I did "pacman -Syu" and got this:
[root@myhost ~]# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
warning: dependency cycle detected:
warning: systemd will be installed before its dbus-core dependency
looking for inter-conflicts...
:: util-linux and eject are in conflict. Remove eject? [y/N]
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: util-linux and eject are in conflict
[root@myhost ~]#
Looks like two distinct problems. Note that I already have the /lib thing taken care of (turning it into a link), in a previous update. The forum searches I have done about this issue did not yield much.
Last edited by PaulBx1 (2012-10-25 19:01:28)

PaulBx1 wrote:
Upgrading that infrequently is unlikely to work well in the long term.
Hell, I thought that was upgrading frequently. One of the reasons I'm on linux is because I don't have to get upgrades every hour as on Windows. "If it ain't broke, don't fix it." I ran a hell of a lot longer on Puppy linux without upgrades. Also, I backup before every upgrade, and then have to fiddle with pacnew files and all the rest, so the result is burning half a day at least on upgrades. I sure don't want to increase the frequency of that.
Arch is a rolling release so it changes basically every day. Updating every week or two is perfectly fine, but updating every couple months brigs you at odds with what Arch is about.
One of the reasons you may not want to use Arch is when you don't want to or can't spend time on the updates.
PaulBx1 wrote:The choice of defaults should (in my opinion) be decided by the needs of the unsophisticated user (such as myself), of which there are many more than the other type. Sophisticated users can intelligently decide between "y" and "n" because they know what is going on. Unsophisticated users just cross their fingers and hope the defaults work for them.
Arch is for experienced users and pacman doesn't do e.g. cleaning up - that's left to the user. pacman can surely help with it: 'pacman 'Qdt'.
It may feel unintuitive, but that's how it is.

I am experiencing low battery backup after upgrade to OS X Mavericks

i am experiencing low battery backup after upgrade to OS X Mavericks

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

What else in logical backups

Hi, DBA Professionals,
If i take logical backup of full database, what else in the database to take backup.
is this logical backup will take only logical data or physical data?
if it takes logical only then what about row=y
and what is difference between isqlplus and oem
could you please clarify my doubts.
thanks a lot in advance.

805547 wrote:
thanks a lot for guided me,
i am using 10g R2 database.
if i take complete, incremental, cumulative backups of my database, if i loss whole database is it possible to recover it with logical backups. if it is yes, what is the method.
A "complete, incremental, cumulative backups" would be physical backups using rman. a "logical" backup would be an export (exp or expdp) dump. The logical backup can only be imported back into a working database, and would be a point-in-time snapshot of the data. With use of proper backup options, a proper physical backup can recover a database from a total loss, and to any point in time covered by the backups.
if i loss system datafile only what is the method to recover it using logical backups.There is none. That's why "logical" backups are only one part - and the least important part - of a complete backup/recovery strategy.

Backup inbetween upgrades?

I backed up my computer with an external hard drive before upgrading to Snow Leopard. Now, I want to upgrade to Lion. Do I need to perform another backup before upgrading from Snow Leopard to Lion?
I have attached my G drive mini to my computer after the upgrade to Snow Leopard was complete and the Time Machine does not give updates as it did on the older Mac OS system. In the new version of Time Machine on Snow Leopard, it appears the only option is to restore. I am afraid this will restore my old OS system. Do I need to restore?
Thanks,
C

Just an idea.... try backing up one category at a time to see if there is particular content that is causing the problem.

RMAN logical backup containing unused blocks

Dear Experts
When i taking logical backup of datafile from RMAN utility i notify that it will also backed up all unused blocks from datafile, so what i need to do, how to avoid that unused block from being backed up while taking logical backup of datafiles.
System details as follows
HP Itanium server
OS - Redhet Linux 5
DB - Oracle10g
Suggest me urgent.

Here i am gonna show you the backup statistics for only those problematic datafiles
DFNAME                                    DATAFILE_BLCKS     BLOCKS          DIFF
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744     9818          1685926
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          8527          1707697
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          9727          1612289
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          9808          1612208
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          24823          1670921
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          19891          1696333
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          20591          1601425
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          17026          1604990
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          21239          1674505
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          17843          1698381
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          19820          1602196
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          14429          1607587
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          33885          1661859
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          41480          1674744
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          32338          1589678
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          26288          1595728
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          10504          1685240
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          18169          1698055
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          16195          1605821
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          11974          1610042
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          16938          1678806
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          25688          1690536
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          30653          1591363
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          20611          1601405
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          965385          730359
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          1010354          705870
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          1004034          617982
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          1695397          347
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          1713435          2789
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          1621255          761
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          1620287          1729
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          1695397          347
/san_index/oradata/orcl/rajemitra_index5.dbf     1171456          1170831          625
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          1695397          347
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          1713470          2754
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          1621261          755
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          1620364          1652
/san_index/oradata/orcl/rajemitra_index5.dbf     1171456          48547          1122909
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          47875          1647869
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          19725          1696499
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          26205          1595811
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          56040          1565976
/san_index/oradata/orcl/rajemitra_index5.dbf     1171456          31859          1139597
/san_index/oradata/orcl/rajemitra_index1.dbf     1695744          29509          1666235
/san_index/oradata/orcl/rajemitra_index2.dbf     1716224          20767          1695457
/san_index/oradata/orcl/rajemitra_index3.dbf     1622016          13210          1608806
/san_index/oradata/orcl/rajemitra_index4.dbf     1622016          31411          1590605

Had to purchase two OS X system upgrades, new iPhoto etc. just to connect new iPhone 5 and now half my apps won't work. No rosetta and missing lost dogs pics from iCloud...HELP!

I had to purchase two OS X system upgrades, snow leopard and mountain lion, just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!

File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
It can be reverted to 10.6.8 yourself.
How to revert your Mac to Snow Leopard
Most commonly used backup methods

Effect of system upgrade

Hi All,
What is the effect if system upgrade happens from R/3 3.0F to 4.6C, if following standard SAP objects are modified in older version (3.0F):
1. Data element,
2. Database tables
3. Structures,
4. Views,
5. Domains,
6. Match code objects
7. Function groups,
8. Programs and its includes,
9. Logical database.
Thanks,
Pankaj.

hi
good
i hope you ll find lots of difference the objects that has been develop in 3.0F and 4.6C.
I dont have much idea about 3.0F, but i hope the look and feel must be difference and the procedures of creating these objects must be different.
thanks
mrutyun^

World Pack instruments missing in Garageband after Logic Pro 8 upgrade...

i have installed the Logic Pro 8 upgrade on my imac and have a slight problem... all of the jam packs show up in Garageband (4.1) except for World Pack... the loops are there, but the instruments are not appearing (they do work in Logic however... anyone?

anyone?

Logic Backup / System Upgrade

Similar Messages

Maybe you are looking for